Electrical conductivity and rheological properties of carbon black based conductive polymer composites prior to and after annealing

2021 ◽  
pp. 096739112110012
Author(s):  
Qingsen Gao ◽  
Jingguang Liu ◽  
Xianhu Liu
Keyword(s):  
Electrical Conductivity ◽  
Carbon Black ◽  
Percolation Threshold ◽  
Rheological Properties ◽  
Network Formation ◽  
Loss Modulus ◽  
Conductive Polymer ◽  
Complex Viscosity ◽  
Electrical Percolation ◽  
Electrical Percolation Threshold

The effect of annealing on the electrical and rheological properties of polymer (poly (methyl methacrylate) (PMMA) and polystyrene (PS)) composites filled with carbon black (CB) was investigated. For a composite with CB content near the electrical percolation threshold, the formation of conductive pathways during annealing has a significant impact on electrical conductivity, complex viscosity, storage modulus and loss modulus. For the annealed samples, a reduction in the electrical and rheological percolation threshold was observed. Moreover, a simple model is proposed to explain these behaviors. This finding emphasizes the differences in network formation with respect to electrical or rheological properties as both properties belong to different physical origins.

scholarly journals A Numerical Study on Electrical Percolation of Polymer-Matrix Composites with Hybrid Fillers of Carbon Nanotubes and Carbon Black

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Yuli Chen ◽  
Shengtao Wang ◽  
Fei Pan ◽  
Jianyu Zhang
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Black ◽  
Percolation Threshold ◽  
Polymer Matrix ◽  
Polymer Matrix Composites ◽  
Matrix Composites ◽  
Electrical Percolation ◽  
Hybrid Fillers ◽  
Nonlinear Relation ◽  
Electrical Percolation Threshold

The electrical percolation of polymer-matrix composites (PMCs) containing hybrid fillers of carbon nanotubes (CNTs) and carbon black (CB) is estimated by studying the connection possibility of the fillers using Monte Carlo simulation. The 3D simulation model of CB-CNT hybrid filler is established, in which CNTs are modeled by slender capped cylinders and CB groups are modeled by hypothetical spheres with interspaces because CB particles are always agglomerated. The observation on the effects of CB and CNT volume fractions and dimensions on the electrical percolation threshold of hybrid filled composites is then carried out. It is found that the composite electrical percolation threshold can be reduced by increasing CNT aspect ratio, as well as increasing the diameter ratio of CB groups to CNTs. And adding CB into CNT composites can decrease the CNT volume needed to convert the composite conductivity, especially when the CNT volume fraction is close to the threshold of PMCs with only CNT filler. Different from previous linear assumption, the nonlinear relation between CB and CNT volume fractions at composite percolation threshold is revealed, which is consistent with the synergistic effect observed in experiments. Based on the nonlinear relation, the estimating equation for the electrical percolation threshold of the PMCs containing CB-CNT hybrid fillers is established.

scholarly journals Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process

2018 ◽  
Author(s):  
Xiaolong Gao ◽  
Yao Huang ◽  
Xiaoxiang He ◽  
Xiaojing Fan ◽  
Ying Liu ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Percolation Threshold ◽  
Polymer Composites ◽  
Flexible Electronics ◽  
Conductive Polymer ◽  
Hot Embossing ◽  
Electrical Percolation ◽  
Flexible Polymer ◽  
Conductive Polymer Composites ◽  
Conducting Filler

Electrically conductive polymer composites are in high demand for modern technologies, however, the intrinsic brittleness of conducting conjugated polymers and the moderate electrical conductivity of engineering polymer/carbon composites have highly constrained their applications. In this work, super high electrical conductive polymer composites were produced by a novel hot embossing design. The polydimethylsiloxane (PDMS) composites containing short carbon fiber (SCF) exhibited an electrical percolation threshold at 0.45 wt%, and reached a saturated electrical conductivity of 49 S/m at 8 wt% of SCF. When reduced the sample thickness from 1.0 mm to 0.1 mm by the hot embossing process, a compression-induced percolation threshold occurred at 0.3 wt%, while the electrical conductivity was further enhanced to 378 S/m at 8 wt% SCF. Furthermore, the additional of a second nanofiller of 1 wt%, such as carbon nanotube or conducting carbon black further increased the electrical conductivity of the PDMS/SCF (8 wt%) composites to 909 S/m and 657 S/m, respectively. The synergy of the densified conducting filler network by the mechanical compression and the hierarchical micro-/nanoscale filler approach has realize super high electrical conductive yet mechanical flexible polymer composites for modern flexible electronics applications.

scholarly journals Effect of polyamide 6 on the morphology and electrical conductivity of carbon black-filled polypropylene composites

2017 ◽  
Vol 4 (12) ◽  
pp. 170769 ◽  
Author(s):  
Xuewei Zhang ◽  
Jiang Liu ◽  
Yi Wang ◽  
Wei Wu
Keyword(s):  
Electrical Conductivity ◽  
Carbon Black ◽  
Plastic Material ◽  
Conductive Polymer ◽  
Polyamide 6 ◽  
Surface Resistivity ◽  
Electric Industry ◽  
Polypropylene Composites ◽  
Electrical Percolation ◽  
Double Percolation

Carbon black (CB)-filled polypropylene (PP) with surface resistivity between 10 6 and 10 9  Ω sq −1 is the ideal antistatic plastic material in the electronics and electric industry. However, a large amount of CB may have an adverse effect on the mechanical properties and processing performance of the material, thus an improved ternary system is developed. Blends of CB-filled PP and polyamide 6 (PA6) have been prepared by melt blending in order to obtain electrically conductive polymer composites with a low electrical percolation threshold based on the concept of double percolation. The morphological developments of these composites were studied by scanning electron microscopy. The results showed that CB particles were selectively dispersed in PA6 phases due to the good interaction and interfacial adhesion between CB and PA6. At the same CB loadings, the surface resistivity of PP/PA6/CB composite was smaller than that of PP/CB composite system, which indicated the better conductivity in the former composite. The increasing amount of PA6 in the composites changed the morphology from a typical sea–island morphology to a co-continuous morphology. What is more, with 8 wt% of CB and PP/PA6 phase ratio of 70/30 in which the PP and PA6 phases formed a co-continuous structure, the electrical conductivity of the composite peaked at 2.01 × 10 5  Ω sq −1 .

scholarly journals Thermal/Electrical Properties and Texture of Carbon Black PC Polymer Composites near the Electrical Percolation Threshold

2021 ◽  
Vol 5 (8) ◽  
pp. 212
Author(s):  
Valentina Brunella ◽  
Beatrice Gaia Rossatto ◽  
Chiara Mastropasqua ◽  
Federico Cesano ◽  
Domenica Scarano
Keyword(s):  
Electrical Properties ◽  
Carbon Black ◽  
Percolation Threshold ◽  
Textural Properties ◽  
Thermoplastic Polymer ◽  
Conductivity Measurements ◽  
Scanning Calorimetry ◽  
Electrical Percolation ◽  
Electrical Percolation Threshold ◽  
Dc Electrical Properties

Polycarbonate (PC), a thermoplastic polymer with excellent properties, is used in many advanced technological applications. When PC is blended with other polymers or additives, new properties, such as electrical properties, can be available. In this study, carbon black (CB) was melt-compounded with PC to produce polymer compounds with compositions (10–16 wt.% of CB), which are close to or above the electrical percolation threshold (13.5–14 wt.% of CB). Effects due to nanofiller dispersion/aggregation in the polymer matrix, together with phase composition, glass transition temperature, morphology and textural properties, were studied by using thermal analysis methods (thermogravimetry and differential scanning calorimetry) and scanning electron microscopy. The DC electrical properties of these materials were also investigated by means of electrical conductivity measurements and correlated with the “structure” of the CB, to better explain the behaviour of the composites close to the percolation threshold.

Cellulose Nanowhiskers Templating in Conductive Polymer Nanocomposites Reduces Electrical Percolation Threshold 5-Fold

2013 ◽  
Vol 2 (2) ◽  
pp. 157-163 ◽  
Author(s):  
Evgeniy Tkalya ◽  
Marcos Ghislandi ◽  
Wim Thielemans ◽  
Paul van der Schoot ◽  
Gijsbertus de With ◽  
...  
Keyword(s):  
Percolation Threshold ◽  
Polymer Nanocomposites ◽  
Conductive Polymer ◽  
Cellulose Nanowhiskers ◽  
Electrical Percolation ◽  
Electrical Percolation Threshold

scholarly journals Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 56 ◽  
Author(s):  
Xiaolong Gao ◽  
Yao Huang ◽  
Xiaoxiang He ◽  
Xiaojing Fan ◽  
Ying Liu ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Percolation Threshold ◽  
Polymer Composites ◽  
Flexible Electronics ◽  
Conductive Polymer ◽  
Hot Embossing ◽  
Electrically Conductive ◽  
Electrical Percolation ◽  
Flexible Polymer ◽  
Conductive Polymer Composites

Electrically conductive polymer composites are in high demand for modern technologies, however, the intrinsic brittleness of conducting conjugated polymers and the moderate electrical conductivity of engineering polymer/carbon composites have highly constrained their applications. In this work, super high electrical conductive polymer composites were produced by a novel hot embossing design. The polydimethylsiloxane (PDMS) composites containing short carbon fiber (SCF) exhibited an electrical percolation threshold at 0.45 wt % and reached a saturated electrical conductivity of 49 S/m at 8 wt % of SCF. When reducing the sample thickness from 1.0 to 0.1 mm by the hot embossing process, a compression-induced percolation threshold occurred at 0.3 wt %, while the electrical conductivity was further enhanced to 378 S/m at 8 wt % SCF. Furthermore, the addition of a second nanofiller of 1 wt %, such as carbon nanotube or conducting carbon black, further increased the electrical conductivity of the PDMS/SCF (8 wt %) composites to 909 S/m and 657 S/m, respectively. The synergy of the densified conducting filler network by the mechanical compression and the hierarchical micro-/nano-scale filler approach has realized super high electrically conductive, yet mechanically flexible, polymer composites for modern flexible electronics applications.

Sign in / Sign up

Export Citation Format

Share Document