Automated near-field deformation detection from mobile laser scanning for the 2014 Mw 6.0 South Napa earthquake

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Xinxiang Zhu ◽  
Craig L. Glennie ◽  
Benjamin A. Brooks
Keyword(s):  
Laser Scanning ◽  
Ground Deformation ◽  
Near Field ◽  
Surface Displacement ◽  
Point Clouds ◽  
Least Squares Adjustment ◽  
Random Sample Consensus ◽  
Fault Deformation ◽  
Fault Trace ◽  
Geometric Primitives

Abstract Quantifying off-fault deformation in the near field remains a challenge for earthquake monitoring using geodetic observations. We propose an automated change detection strategy using geometric primitives generated using a deep neural network, random sample consensus and least squares adjustment. Using mobile laser scanning point clouds of vineyards acquired after the magnitude 6.0 2014 South Napa earthquake, our results reveal centimeter-level horizontal ground deformation over three kilometers along a segment of the West Napa Fault. A fault trace is detected from rows of vineyards modeled as planar primitives from the accumulated coseismic response, and the postseismic surface displacement field is revealed by tracking displacements of vineyard posts modeled as cylindrical primitives. Interpreted from the detected changes, we summarized distributions of deformation versus off-fault distances and found evidence of off-fault deformation. The proposed framework using geometric primitives is shown to be accurate and practical for detection of near-field off-fault deformation.

scholarly journals ORTHOGRAPHIC REFLECTANCE IMAGE FOR PLANAR TARGET LOCALIZATION IN LOW DENSITY TLS POINT CLOUDS

2019 ◽  
Vol XLII-2/W13 ◽  
pp. 995-1000
Author(s):  
D. Guo ◽  
D. Yu ◽  
Y. Liang ◽  
C. Feng
Keyword(s):  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
Target Localization ◽  
Low Density ◽  
Point Density ◽  
Least Squares Adjustment ◽  
Sample Interval ◽  
Orthographic Image ◽  
Target Center

<p><strong>Abstract.</strong> Point cloud registration is important and essential task for terrestrial laser scanning applications. Point clouds acquired at different positions exhibit significant variation in point density. Most registration methods implicitly assume dense and uniform distributed point clouds, which is hardly the case in large-scale surveying. The accuracy and robustness of feature extraction are greatly influenced by the point density, which undermines the feature-based registration methods. We show that the accuracy and robustness of target localization dramatically decline with decreasing point density. A methodology for localization of artificial planar targets in low density point clouds is presented. An orthographic image of the target is firstly generated and the potential position of the target center is interactively selected. Then the 3D position of the target center is estimated by a non-linear least squares adjustment. The presented methodology enables millimeter level accuracy of target localization in point clouds with 30mm sample interval. The robustness and effectiveness of the methodology is demonstrated by the experimental results.</p>

scholarly journals Fast registration of laser scans with 4-point congruent sets - what works and what doesn't

2014 ◽  
Vol II-3 ◽  
pp. 149-156 ◽  
Author(s):  
P. W. Theiler ◽  
J. D. Wegner ◽  
K. Schindler
Keyword(s):  
Laser Scanning ◽  
Error Function ◽  
Near Field ◽  
Point Clouds ◽  
What Works ◽  
Scan Registration ◽  
Field Bias ◽  
Indoor Scenarios ◽  
Automated Registration ◽  
Repeated Evaluation

Sampling-based algorithms in the mould of RANSAC have emerged as one of the most successful methods for the fully automated registration of point clouds acquired by terrestrial laser scanning (TLS). Sampling methods in conjunction with 3D keypoint extraction, have shown promising results, e.g. the recent K-4PCS (Theiler et al., 2013). However, they still exhibit certain improbable failures, and are computationally expensive and slow if the overlap between scans is low. Here, we examine several variations of the basic K-4PCS framework that have the potential to improve its runtime and robustness. Since the method is inherently parallelizable, straight-forward multi-threading already brings down runtimes to a practically acceptable level (seconds to minutes). At a conceptual level, replacing the RANSAC error function with the more principled MSAC function (Torr and Zisserman, 2000) and introducing a minimum-distance prior to counter the near-field bias reduce failure rates by a factor of up to 4. On the other hand, replacing the repeated evaluation of the RANSAC error function with a voting scheme over the transformation parameters proved not to be generally applicable for the scan registration problem. All these possible extensions are tested experimentally on multiple challenging outdoor and indoor scenarios.

scholarly journals Individual Tree Structural Parameter Extraction and Volume Table Creation Based on Near-Field LiDAR Data: A Case Study in a Subtropical Planted Forest

Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 8162
Author(s):  
Sha Gao ◽  
Zhengnan Zhang ◽  
Lin Cao
Keyword(s):  
Laser Scanning ◽  
Forest Canopy ◽  
Structural Parameters ◽  
Near Field ◽  
Point Clouds ◽  
Parameter Extraction ◽  
Structural Parameter ◽  
Planted Forests ◽  
Individual Tree ◽  
Volume Models

Individual tree structural parameters are vital for precision silviculture in planted forests. This study used near-field LiDAR (light detection and ranging) data (i.e., unmanned aerial vehicle laser scanning (ULS) and ground backpack laser scanning (BLS)) to extract individual tree structural parameters and fit volume models in subtropical planted forests in southeastern China. To do this, firstly, the tree height was acquired from ULS data and the diameter at breast height (DBH) was acquired from BLS data by using individual tree segmentation algorithms. Secondly, point clouds of the complete forest canopy were obtained through the combination of ULS and BLS data. Finally, five tree taper models were fitted using the LiDAR-extracted structural parameters of each tree, and then the optimal taper model was selected. Moreover, standard volume models were used to calculate the stand volume; then, standing timber volume tables were created for dawn redwood and poplar. The extraction of individual tree structural parameters exhibited good performance. The volume model had a good performance in calculating the standing volume for dawn redwood and poplar. Our results demonstrate that near-field LiDAR has a strong capability of extracting tree structural parameters and creating volume tables for subtropical planted forests.

scholarly journals Analysis of glacial and periglacial processes using structure from motion

2015 ◽  
Vol 3 (4) ◽  
pp. 1345-1398 ◽  
Author(s):  
L. Piermattei ◽  
L. Carturan ◽  
F. de Blasi ◽  
P. Tarolli ◽  
G. Dalla Fontana ◽  
...  
Keyword(s):  
Structure From Motion ◽  
Laser Scanning ◽  
Surface Displacement ◽  
Surface Characteristics ◽  
Point Clouds ◽  
Rock Glacier ◽  
Dense Image ◽  
Survey Technique ◽  
Close Range ◽  
Geodetic Mass Balance

Abstract. Close-range photo-based surface reconstruction from the ground is rapidly emerging as an alternative to lidar (light detection and ranging), which today represents the main survey technique in many fields of geoscience. The recent evolution of photogrammetry, incorporating computer vision algorithms such as Structure from Motion (SfM) and dense image matching such as Multi-View Stereo (MVS), allows the reconstruction of dense 3-D point clouds for the photographed object from a sequence of overlapping images taken with a digital consumer camera. The objective of our work was to test the accuracy of the ground-based SfM-MVS approach in calculating the geodetic mass balance of a 2.1 km2 glacier in the Ortles-Cevedale Group, Eastern Italian Alps. In addition, we investigated the feasibility of using the image-based approach for the detection of the surface displacement rate of a neighbouring active rock glacier. Airborne laser scanning (ALS) data were used as benchmarks to estimate the accuracy of the photogrammetric DTMs and the reliability of the method in this specific application. The glacial and periglacial analyses were performed using both range and image-based surveying techniques, and the results were then compared. The results were encouraging because the SfM-MVS approach enables the reconstruction of high-quality DTMs which provided estimates of glacial and periglacial processes similar to those achievable by ALS. Different resolutions and accuracies were obtained for the glacier and the rock glacier, given the different survey geometries, surface characteristics and areal extents. The analysis of the SfM-MVS DTM quality allowed us to highlight the limitations of the adopted expeditious method in the studied alpine terrain and the potential of this method in the multitemporal study of glacial and periglacial areas.

scholarly journals Disturbance Analysis in the Classification of Objects Obtained from Urban LiDAR Point Clouds with Convolutional Neural Networks

2021 ◽  
Vol 13 (11) ◽  
pp. 2135
Author(s):  
Jesús Balado ◽  
Pedro Arias ◽  
Henrique Lorenzo ◽  
Adrián Meijide-Rodríguez
Keyword(s):  
Laser Scanning ◽  
Ambient Noise ◽  
Point Clouds ◽  
Density Variation ◽  
Density Reduction ◽  
Manual Intervention ◽  
Point Density ◽  
Disturbance Analysis ◽  
Street Furniture

Mobile Laser Scanning (MLS) systems have proven their usefulness in the rapid and accurate acquisition of the urban environment. From the generated point clouds, street furniture can be extracted and classified without manual intervention. However, this process of acquisition and classification is not error-free, caused mainly by disturbances. This paper analyses the effect of three disturbances (point density variation, ambient noise, and occlusions) on the classification of urban objects in point clouds. From point clouds acquired in real case studies, synthetic disturbances are generated and added. The point density reduction is generated by downsampling in a voxel-wise distribution. The ambient noise is generated as random points within the bounding box of the object, and the occlusion is generated by eliminating points contained in a sphere. Samples with disturbances are classified by a pre-trained Convolutional Neural Network (CNN). The results showed different behaviours for each disturbance: density reduction affected objects depending on the object shape and dimensions, ambient noise depending on the volume of the object, while occlusions depended on their size and location. Finally, the CNN was re-trained with a percentage of synthetic samples with disturbances. An improvement in the performance of 10–40% was reported except for occlusions with a radius larger than 1 m.

scholarly journals Linear-Based Incremental Co-Registration of MLS and Photogrammetric Point Clouds

2021 ◽  
Vol 13 (11) ◽  
pp. 2195
Author(s):  
Shiming Li ◽  
Xuming Ge ◽  
Shengfu Li ◽  
Bo Xu ◽  
Zhendong Wang
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Registration Method ◽  
Cloud Data ◽  
Linear Feature ◽  
Data Registration ◽  
Source Point ◽  
Urban Remote Sensing ◽  
Single Data

Today, mobile laser scanning and oblique photogrammetry are two standard urban remote sensing acquisition methods, and the cross-source point-cloud data obtained using these methods have significant differences and complementarity. Accurate co-registration can make up for the limitations of a single data source, but many existing registration methods face critical challenges. Therefore, in this paper, we propose a systematic incremental registration method that can successfully register MLS and photogrammetric point clouds in the presence of a large number of missing data, large variations in point density, and scale differences. The robustness of this method is due to its elimination of noise in the extracted linear features and its 2D incremental registration strategy. There are three main contributions of our work: (1) the development of an end-to-end automatic cross-source point-cloud registration method; (2) a way to effectively extract the linear feature and restore the scale; and (3) an incremental registration strategy that simplifies the complex registration process. The experimental results show that this method can successfully achieve cross-source data registration, while other methods have difficulty obtaining satisfactory registration results efficiently. Moreover, this method can be extended to more point-cloud sources.

scholarly journals Matching Point Clouds with STL Models by Using the Principle Component Analysis and a Decomposition into Geometric Primitives

2021 ◽  
Vol 11 (5) ◽  
pp. 2268
Author(s):  
Erika Straková ◽  
Dalibor Lukáš ◽  
Zdenko Bobovský ◽  
Tomáš Kot ◽  
Milan Mihola ◽  
...  
Keyword(s):  
Point Cloud ◽  
Principal Component ◽  
Point Clouds ◽  
Component Analysis ◽  
Language Models ◽  
Computational Time ◽  
Dominant Eigenvalue ◽  
Eigenvalues And Eigenvectors ◽  
Correct Model ◽  
Geometric Primitives

While repairing industrial machines or vehicles, recognition of components is a critical and time-consuming task for a human. In this paper, we propose to automatize this task. We start with a Principal Component Analysis (PCA), which fits the scanned point cloud with an ellipsoid by computing the eigenvalues and eigenvectors of a 3-by-3 covariant matrix. In case there is a dominant eigenvalue, the point cloud is decomposed into two clusters to which the PCA is applied recursively. In case the matching is not unique, we continue to distinguish among several candidates. We decompose the point cloud into planar and cylindrical primitives and assign mutual features such as distance or angle to them. Finally, we refine the matching by comparing the matrices of mutual features of the primitives. This is a more computationally demanding but very robust method. We demonstrate the efficiency and robustness of the proposed methodology on a collection of 29 real scans and a database of 389 STL (Standard Triangle Language) models. As many as 27 scans are uniquely matched to their counterparts from the database, while in the remaining two cases, there is only one additional candidate besides the correct model. The overall computational time is about 10 min in MATLAB.

scholarly journals Terrestrial Laser Scanning for Vegetation Analyses with a Special Focus on Savannas

2021 ◽  
Vol 13 (3) ◽  
pp. 507
Author(s):  
Tasiyiwa Priscilla Muumbe ◽  
Jussi Baade ◽  
Jenia Singh ◽  
Christiane Schmullius ◽  
Christian Thau
Keyword(s):  
Remote Sensing ◽  
Vegetation Structure ◽  
Laser Scanning ◽  
Spatial Scales ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Parameter Extraction ◽  
Airborne Lidar ◽  
Special Focus ◽  
Vegetation Parameter

Savannas are heterogeneous ecosystems, composed of varied spatial combinations and proportions of woody and herbaceous vegetation. Most field-based inventory and remote sensing methods fail to account for the lower stratum vegetation (i.e., shrubs and grasses), and are thus underrepresenting the carbon storage potential of savanna ecosystems. For detailed analyses at the local scale, Terrestrial Laser Scanning (TLS) has proven to be a promising remote sensing technology over the past decade. Accordingly, several review articles already exist on the use of TLS for characterizing 3D vegetation structure. However, a gap exists on the spatial concentrations of TLS studies according to biome for accurate vegetation structure estimation. A comprehensive review was conducted through a meta-analysis of 113 relevant research articles using 18 attributes. The review covered a range of aspects, including the global distribution of TLS studies, parameters retrieved from TLS point clouds and retrieval methods. The review also examined the relationship between the TLS retrieval method and the overall accuracy in parameter extraction. To date, TLS has mainly been used to characterize vegetation in temperate, boreal/taiga and tropical forests, with only little emphasis on savannas. TLS studies in the savanna focused on the extraction of very few vegetation parameters (e.g., DBH and height) and did not consider the shrub contribution to the overall Above Ground Biomass (AGB). Future work should therefore focus on developing new and adjusting existing algorithms for vegetation parameter extraction in the savanna biome, improving predictive AGB models through 3D reconstructions of savanna trees and shrubs as well as quantifying AGB change through the application of multi-temporal TLS. The integration of data from various sources and platforms e.g., TLS with airborne LiDAR is recommended for improved vegetation parameter extraction (including AGB) at larger spatial scales. The review highlights the huge potential of TLS for accurate savanna vegetation extraction by discussing TLS opportunities, challenges and potential future research in the savanna biome.

scholarly journals Using Least-Squares Residuals to Assess the Stochasticity of Measurements—Example: Terrestrial Laser Scanner and Surface Modeling

2021 ◽  
Vol 5 (1) ◽  
pp. 59
Author(s):  
Gaël Kermarrec ◽  
Niklas Schild ◽  
Jan Hartmann
Keyword(s):  
Least Squares ◽  
Laser Scanner ◽  
Real Data ◽  
Point Clouds ◽  
Statistical Testing ◽  
Normal Vector ◽  
Engineering Structures ◽  
3D Point Clouds ◽  
Least Squares Adjustment ◽  
Correlation Parameters

Terrestrial laser scanners (TLS) capture a large number of 3D points rapidly, with high precision and spatial resolution. These scanners are used for applications as diverse as modeling architectural or engineering structures, but also high-resolution mapping of terrain. The noise of the observations cannot be assumed to be strictly corresponding to white noise: besides being heteroscedastic, correlations between observations are likely to appear due to the high scanning rate. Unfortunately, if the variance can sometimes be modeled based on physical or empirical considerations, the latter are more often neglected. Trustworthy knowledge is, however, mandatory to avoid the overestimation of the precision of the point cloud and, potentially, the non-detection of deformation between scans recorded at different epochs using statistical testing strategies. The TLS point clouds can be approximated with parametric surfaces, such as planes, using the Gauss–Helmert model, or the newly introduced T-splines surfaces. In both cases, the goal is to minimize the squared distance between the observations and the approximated surfaces in order to estimate parameters, such as normal vector or control points. In this contribution, we will show how the residuals of the surface approximation can be used to derive the correlation structure of the noise of the observations. We will estimate the correlation parameters using the Whittle maximum likelihood and use comparable simulations and real data to validate our methodology. Using the least-squares adjustment as a “filter of the geometry” paves the way for the determination of a correlation model for many sensors recording 3D point clouds.

Sign in / Sign up

Export Citation Format

Share Document