scholarly journals Investigation effect of wettability and heterogeneity in water flooding and on microscopic residual oil distribution in tight sandstone cores with NMR technique

Open Physics ◽  
2017 ◽  
Vol 15 (1) ◽  
pp. 544-550 ◽  
Author(s):  
Pufu Xiao ◽  
Xiaoyong Leng ◽  
Hanmin Xiao ◽  
Linghui Sun ◽  
Haiqin Zhang ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Physical Simulation ◽  
Spontaneous Imbibition ◽  
Recovery Factor ◽  
Water Flooding ◽  
Pore Throat ◽  
Tight Sandstone ◽  
Large Pore ◽  
Oil Distribution ◽  
The Difference

AbstractIn order to explore the effect of wettability and pore throat heterogeneity on oil recovery efficiency in porous media, physical simulation experiment and nuclear magnetic resonance (NMR) measurements were conducted to investigate how crude oil residing in different sized pores are recovered by water flooding. Experimental results indicate that the recovery factor of water flooding is governed by spontaneous imbibition and also pore throat heterogeneity. It is found that intermediate wetting cores lead to the highest final recovery factor in comparison with water wet cores and weak oil wet cores, and the recovery oil difference in clay micro pore is mainly because of the wettability, the difference in medium pore and large pore is affected by pore throat heterogeneity. Water wet core has a lower recovery factor in medium and large pore due to its poor heterogeneity, in spite of the spontaneous imbibition effect is very satisfying. Intermediate wetting cores has significant result in different sized pore and throat, the difference in medium pore and large pore is affected by pore throat heterogeneity.

Experimental Simulation on Imbibition of the Residual Fracturing Fluid in Tight Sandstone Reservoirs

2019 ◽  
Vol 141 (8) ◽  
Author(s):  
Xiaoxia Ren ◽  
Aifen Li ◽  
Asadullah Memon ◽  
Shuaishi Fu ◽  
Guijuan Wang ◽  
...  
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
Experimental Simulation ◽  
Fluid Distribution ◽  
Oil Viscosity ◽  
Pore Throat ◽  
Fracturing Fluid ◽  
Tight Sandstone ◽  
The Difference ◽  
Displacement Processes

Fracturing is a fundamental technique for enhancing oil recovery of tight sandstone reservoir. The pores in tight reservoirs generally have small radii and generate tremendous capillary force; accordingly, the imbibition effect can significantly affect retention and absorption of the fracturing fluid. In this study, the imbibition behaviors of the fracturing fluid were experimentally investigated, and the effects of interfacial tension, (IFT) permeability, oil viscosity, and the salinity of the imbibition fluid were determined. In addition, combining with nuclear magnetic resonance (NMR)-based core analysis, fluid distribution, and the related variations in imbibition and displacement processes were analyzed. Finally, some key influencing factors of imbibition of the residual fracturing fluid, the difference and correlation between imbibition and displacement, as well as the contribution of imbibition to displacement were explored so as to provide optimization suggestions for guiding the application of oil-displacing fracturing fluid in exploration. Results show that imbibition recovery increased with time, but the imbibition rate gradually dropped. There exists an optimal interfacial tension that corresponds to maximum imbibition recovery. In addition, imbibition recovery increased as permeability and salinity increases and oil viscosity decreases. Furthermore, it was found that extracted oil from the movable pore throat space was almost equal to that from the irreducible pore throat space during imbibition and their contribution in the irreducible pore throat space was greater than in the movable pore throat space in the displacement process. Hence, imbibition plays a more important role during the displacement process in the reservoirs with finer porous structure than previously thought.

scholarly journals Physical Simulation of Colayer Water Flooding in Low Permeability Carbonate Reservoir in Middle East

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Xingwang Shi ◽  
Zhengming Yang ◽  
Yapu Zhang ◽  
Guangya Zhu ◽  
Qianhua Xiao
Keyword(s):  
Middle East ◽  
Physical Simulation ◽  
Carbonate Reservoir ◽  
Water Flooding ◽  
Low Permeability ◽  
Pore Throat ◽  
Large Pore ◽  
Production Models ◽  
Small Pore ◽  
Comprehensive Recovery

To study the flow mechanism under different displacement modes of low permeability carbonate reservoir in the Middle East and to improve the utilization of various types of reservoirs, the physical simulation experiments of water flooding by different displacement methods were carried out. Selecting two types of rock samples with different permeability levels, two-layer coinjection and separated production experiments by samples I and III and conventional water flooding experiments by samples II and IV were carried out. In addition, by using low magnetic field nuclear magnetic resonance, the development effect of microscopic pore structure under the different injection-production models was analyzed. Results show that, compared with the coinjection, the recovery rate of sample I was higher than II, 19.30%; sample III was lower than IV, 23.22%; and the comprehensive recovery degree reduced by 3.92%. NMR data also show that the crude oil is mainly distributed in the large pore throat; after water flooding, the displacement is also within the large pore throat, whereas the small pore throat is mainly obtained by the effect of infiltration absorption. The above studies provide a laboratory basis and foundation for the further development of low permeability carbonate reservoir in different Middle East strata.

scholarly journals Experimental Investigation on the Characteristic Mobilization and Remaining Oil Distribution under CO2 Huff-n-Puff of Chang 7 Continental Shale Oil

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2782
Author(s):  
Jianhong Zhu ◽  
Junbin Chen ◽  
Xiaoming Wang ◽  
Lingyi Fan ◽  
Xiangrong Nie
Keyword(s):  
Oil Recovery ◽  
Physical Simulation ◽  
Shale Oil ◽  
Economic Cycle ◽  
Cycle Number ◽  
Oil Distribution ◽  
Remaining Oil ◽  
The Difference ◽  
Enhance Oil Recovery ◽  
Very High

The Chang 7 continental shale oil reservoir is tight. The recovery factor is extremely low, the remaining oil is very high, and injecting water to improve oil recovery effectiveness is too hard. Therefore, in this paper, physical simulation experiments of CO2 huff-n-puff shale oil and NMR tests were conducted to study the cycle numbers and permeability on the recovery degree, as well as the characteristics of shale oil mobilization and the remaining oil micro distribution. The results showed that the cumulative oil recovery factors (ORFs) gradually increased in the natural logarithmic form, the single cycle ORFs decreased rapidly in exponential form with the huff-n-puff cycle number, and the biggest economic cycle numbers were between approximately 3 and 5. Furthermore, the higher the permeability, the higher the ORF, but the difference of ORF decreased between the two experimental samples with the cycles. In addition, the gap of production and recovery degree was large between the different scale pores, the ORF of macropores was 6–8 times that of micropores, and the final remaining oil was mainly distributed in the micropores, accounting for 82.29% of the total amount; meanwhile, the macropores comprised less than 0.5%. In the process of huff-n-puff, CO2 flowed into macropores, mesopores, and smallpores under the pressure differential effect, but a small amount of CO2 slowly diffused into micropores, resulting in the ORF of the former with more free oil being higher and the ORF of micropores with more adsorbed oil being lower. Therefore, promoting a better contact and reaction between CO2 and shale oil of micropores is one of the key ways to effectively develop the Chang 7 continental shale oil and enhance oil recovery.

The Research of Flood Pattern Completeness in the Thin and Poor Oil Layers of South West II Area

2012 ◽  
Vol 594-597 ◽  
pp. 2541-2544
Author(s):  
Xiao Hui Wu ◽  
Kao Ping Song ◽  
Chi Dong ◽  
Ji Cheng Zhang ◽  
Jing Fu Deng
Keyword(s):  
Oil Recovery ◽  
Water Flooding ◽  
South West ◽  
Oil Distribution ◽  
Well Pattern ◽  
Remaining Oil ◽  
Tertiary Oil Recovery ◽  
Well Pattern Optimization ◽  
Numerical Simulation Technique

As line well pattern is the main development technique in the thin and poor oil layers of Daqing Oilfield South West Ⅱ PⅠ group, the layers have been idle and the degree of reserve recovery is far less than the region level. In response to these problems, we analyzed the balanced flood performance of various layers and the remaining oil distribution through numerical simulation technique. It shows that, the main remaining oil type of intended layers is caused by voidage-injection imperfection. Considering the needs of the follow-up infill well pattern and tertiary oil recovery, we decided to keep the well network independent and integrated without disturbing the pattern configuration and main mining object of various sets of well pattern. Finally we confirmed to perforate-adding the first infill wells of intended layers to consummate the water flooding regime. Through analyzing the production target of different well pattern optimization programs relatively, it shows that the best program has regular well pattern and large drilled thickness.

Improving Water Injectivity Through Lateral Radial Drilling into the Reservoir

2021 ◽  
Author(s):  
Effiong Essien ◽  
Uchenna Onyejiaka ◽  
Stanley Onwukwe ◽  
Nnaemeka Uwaezuoke
Keyword(s):  
Oil Recovery ◽  
Damage Zone ◽  
Water Injection ◽  
Progressive Increase ◽  
Recovery Factor ◽  
Water Flooding ◽  
Increase With Increase ◽  
Drilling Technology ◽  
Water Cut ◽  
Radial Drilling

Abstract Poor formation permeability and near well bore damage may limit water injectivity into the reservoir in a water injection project. This paper seeks to evaluate the effect of radial drilling technique on water injectivity and oil recovery in water flooding operation. Radial drilling technology utilizes hydraulic energy to create lateral perpendicular small holes through the casing into the reservoir. The holes may extend to 100 m (330 ft) into the reservoir to access fresh formations beyond the near wellbore, and damage zone. A black oil simulator (Eclipse 100) was used to modeling a lateral radial drill from the borehole into the reservoir, and that of a conventional perforation of the wellbore respectively. A simulation study was carried out using various presumed radial drill configurations in determining injectivity index, displacement efficiencies, recovery factor and water cut of the process. The determined results were further compared with that of the conventional perforation process case respectively. The results show a significant improvement in water injectivity in radial drill case with the increasing length and number of radials as compared to the conventional wellbore perforation case. The determined Recovery factor shows a progressive increase with increase in the numbers of radials drilled, irrespective of the radial length. However, it was observed that, the more the number and length of the radials drilled in to the reservoir, the higher the water cut from producer wells. Radial Drilling Technology, therefore, has a promising potential to improving water injectivity into the reservoir and thereby optimizing oil recovery in a water flooding operation.

scholarly journals Microscopic Determination of Remaining Oil Distribution in Sandstones With Different Permeability Scales Using Computed Tomography Scanning

2019 ◽  
Vol 141 (9) ◽  
Author(s):  
Yongfei Yang ◽  
Haiyuan Yang ◽  
Liu Tao ◽  
Jun Yao ◽  
Wendong Wang ◽  
...  
Keyword(s):  
Distribution Pattern ◽  
Oil Recovery ◽  
Distribution Patterns ◽  
High Water ◽  
Water Flooding ◽  
Oil Distribution ◽  
Computed Tomography Scanning ◽  
Remaining Oil ◽  
High Water Cut ◽  
Water Cut

To investigate the characteristics of oil distribution in porous media systems during a high water cut stage, sandstones with different permeability scales of 53.63 × 10−3 μm2 and 108.11 × 10−3 μm2 were imaged under a resolution of 4.12 μm during a water flooding process using X-ray tomography. Based on the cluster-size distribution of oil segmented from the tomography images and through classification using the shape factor and Euler number, the transformation of the oil distribution pattern in different injection stages was studied for samples with different pore structures. In general, the distribution patterns of an oil cluster continuously change during water injection. Large connected oil clusters break off into smaller segments. The sandstone with a higher permeability (108.11 × 10−3 μm2) shows the larger change in distribution pattern, and the remaining oil is trapped in the pores with a radius of approximately 7–12 μm. Meanwhile, some disconnected clusters merge together and lead to a re-connection during the high water cut period. However, the pore structure becomes compact and complex, the residual nonwetting phase becomes static and is difficult to move; and thus, all distribution patterns coexist during the entire displacement process and mainly distribute in pores with a radius of 8–12 μm. For the pore-scale entrapment characteristics of the oil phase during a high water cut period, different enhance oil recovery (EOR) methods should be considered in sandstones correspondent to each permeability scale.

Application of NMR Technology on Test of Movable Fluid Saturation of Tight Sandstone Gas Reservoir

2015 ◽  
Vol 1092-1093 ◽  
pp. 1361-1365
Author(s):  
Hong Xia Ming ◽  
Wei Sun ◽  
Ping Wu
Keyword(s):  
Pore Structure ◽  
Transverse Relaxation Time ◽  
Single Peak ◽  
Pore Throat ◽  
Tight Sandstone ◽  
Gas Reservoir ◽  
Fluid Saturation ◽  
Structure Heterogeneity ◽  
Spectrum Distribution ◽  
The Difference

The difference of movable fluid saturation of tight sandstone gas reservoir is researched, with transverse relaxation time (T2) distribution derived from nuclear magnetic resonance technique (NMR). This article newly calculate T2 cutoff value and elaborate the influence of pore structure on the occurrence characteristics of movable fluid. The study had revealed T2 spectrum distribution includes the following types: (1) wide and flat single peak; (2) left single peak; (3) high left peak with low right peak. Movable fluid saturation is low, with class IV and class V movable fluid mainly. Pore structure control properties and percolation ability of rock reservoir and whether oil could be driven out depends on throat parameters of interconnected pores. Movable fluid saturation is low with bigger pore throat ratio, narrower pore throat distribution and higer pore structure heterogeneity.

scholarly journals Quantitative Study of Residual Oil Distribution during Water Flooding through Digital Core Analysis

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Xuechao Liu ◽  
Dazhong Ren ◽  
Fengjuan Dong ◽  
Junxiang Nan ◽  
Ran Zhou
Keyword(s):  
Ct Scanning ◽  
Water Flooding ◽  
Fluid Distribution ◽  
Core Analysis ◽  
Residual Oil ◽  
Tight Sandstone ◽  
Oil Storage ◽  
Oil Distribution ◽  
Distribution Features ◽  
Digital Core

The character of residual oil formed during water flooding, one important technique to enhance oil recovery, is helpful to further study permeability and recovery in tight sandstone oil reservoirs. In this paper, we take a tight sandstone reservoir in Ordos Basin as the research object and use in situ displacement X-CT scanning technology to analyze the dynamic characteristics of oil during water flooding. Firstly, core pore radius and oil storage space radius were measured from digital cores which are acquired in different water flooding stages by X-CT scanning technology. Secondly, analytical and evaluation methods were established to describe fluid distribution in the pore space of the core in different water flooding stages based on curve similarity. Finally, by numerical results, we analyzed the oil distribution features in the process of water flooding for core samples. In this paper, the oil distribution characteristics during water flooding are revealed based on digital core analysis. Also, a quantitative evaluation method is given to provide theoretical guidance.

scholarly journals Effect of Fluid/Rock Interactions on Physical Character of Tight Sandstone Reservoirs during CO2 Flooding

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Dongfeng Zhao ◽  
Dandan Yin
Keyword(s):  
Oil Recovery ◽  
Medium Size ◽  
Co2 Flooding ◽  
Production Well ◽  
Pore Throat ◽  
Tight Sandstone ◽  
Pressure Drops ◽  
Pore Radius Distribution ◽  
Salt Crystals ◽  
Permeability Alteration

Structures of pore-throat and permeability alteration caused by precipitation and the dissolution of rock matrix are serious problems during CO2 flooding into reservoirs for enhanced oil recovery (EOR). Experiments were conducted under pressure boost and reduction conditions, which simulate CO2-brine scaling in different parts of the reservoir during CO2 flooding. And experiments on the dissolution and scaling of CO2-brine-rock were carried out. The results show that the pH of brine with CO2 under high pressure is small, and no precipitation is formed, so there is no precipitation generated near the gas injection well. Pressure drops sharply near the production well, CO2 dissolved in the formation fluid escapes in large quantities, pH increases, carbonate precipitates are generated, so inorganic scale is formed near the production well. The increase of permeability of core saturated high scale-forming ions is smaller than that of saturated no scale-forming ions brine after CO2 flooding. The accumulation and attachment of salt crystals were found in some large pores of the core with scale-forming ions water after CO2 flooding. The ratio of medium size pores decreased, while that of large and small pores increases, and the pore radius distribution differentiates toward polarization.

Sign in / Sign up

Export Citation Format

Share Document