scholarly journals Integrating Non-Friction-Based Braking Technology into Locomotives to Improve Train Efficiency, Durability, and Safety

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Christian Wanamaker
Keyword(s):  
Regenerative Braking ◽  
External Energy ◽  
Railway Network ◽  
Railway Company ◽  
Braking System ◽  
Drag Forces ◽  
Frequent Use ◽  
Fluid Drag ◽  
Air Brakes ◽  
Intuitive Method

While frictional braking is an intuitive method by which to slow vehicles, it is also a costly braking method due to the fact that frictional brakes wear down due to frequent use and high quantities of friction. On trains, this problem is worse because of their constant use and because heavier objects require stronger braking forces. The objective is to improve locomotive performance by developing a braking system that utilizes non-frictional braking technology to cut these costs and yield safer, more durable brakes. This project is directed towards dieselelectric3 locomotives with air brakes, as engineers can design blended braking systems that integrate non-frictional braking into these braking systems. The candidate solutions include regenerative, rheostatic, and hydrodynamic braking, two of which use magnetic fields, and the third of which uses fluid drag forces. Regenerative braking is the proposed solution due to its ability to harness and use electricity during braking. Project success would contribute to railway company success by reducing expenses spent on air brakes; it would also contribute to locomotive manufacturer success because the product will likely become a popular technology. Finally, it would benefit the environment by reducing the external energy required by the railway network. Keywords: Locomotive, braking, non-frictional, regenerative, rheostatic, hydrodynamic, diesel-electric

HYDRAULIC-PNEUMATIC REGENERATIVE BRAKING SYSTEM FOR HYBRIDIZATION OF COMMERCIAL URBAN VEHICLES

2017 ◽  
Author(s):  
Rafael Rivelino da Silva Bravo ◽  
Artur Tozzi C Gama ◽  
Amir Antonio Martins Oliveira ◽  
Victor Juliano De Negri
Keyword(s):  
Regenerative Braking ◽  
Braking System

Intelligent optimization of EV comfort based on a cooperative braking system

2021 ◽  
pp. 095440702110044
Author(s):  
Lingying Zhao ◽  
Min Ye ◽  
Xinxin Xu
Keyword(s):  
System Model ◽  
Regenerative Braking ◽  
Coupling Mechanism ◽  
Intelligent Algorithm ◽  
Distribution Strategy ◽  
Braking System ◽  
Logic Diagram ◽  
Braking Torque ◽  
Braking Force ◽  
The Time Domain

To address the comfort of an electric vehicle, a coupling mechanism between mechanical friction braking and electric regenerative braking was studied. A cooperative braking system model was established, and comprehensive simulations and system optimizations were carried out. The performance of the cooperative braking system was analyzed. The distribution of the braking force was optimized by an intelligent method, and the distribution of a braking force logic diagram based on comfort was proposed. Using an intelligent algorithm, the braking force was distributed between the two braking systems and between the driving and driven axles. The experiment based on comfort was carried out. The results show that comfort after optimization is improved by 76.29% compared with that before optimization by comparing RMS value in the time domain. The reason is that the braking force distribution strategy based on the optimization takes into account the driver’s braking demand, the maximum braking torque of the motor, and the requirements of vehicle comfort, and makes full use of the braking torque of the motor. The error between simulation results and experimental results is 5.13%, which indicates that the braking force’s distribution strategy is feasible.

Development of the Electrically-Controlled Regenerative Braking System for Electrified Passenger Vehicle

2013 ◽  
Author(s):  
Junzhi Zhang ◽  
Chen Lv ◽  
Xiaowei Yue ◽  
Mingzhe Qiu ◽  
Jinfang Gou ◽  
...  
Keyword(s):  
Regenerative Braking ◽  
Passenger Vehicle ◽  
Braking System

Pressure Coordinated Control System of Regenerative Braking Based on Hardware of ABS for HEV

2011 ◽  
Vol 121-126 ◽  
pp. 3406-3410 ◽  
Author(s):  
Yang Yang ◽  
Yang Yang ◽  
Da Tong Qin ◽  
Jin Li
Keyword(s):  
Control System ◽  
Simulation Model ◽  
Electric Vehicles ◽  
Hybrid Electric Vehicles ◽  
Coordinated Control ◽  
Regenerative Braking ◽  
Design And Optimization ◽  
Braking System ◽  
Dynamic Performances ◽  
Simulation Results

A new kind of pressure coordinated control system suite of regenerative braking system for hybrid electric vehicles (HEV) is proposed in this paper on the basis of appropriate transformation on traditional hydraulic braking system with ABS. AMEsim modular simulation platform is used to build a simulation model of the system. Dynamic performances of the key components and system are simulated and analyzed. And the simulation results show the effectiveness and feasibility of the pressure coordinated control system, which lays the foundation of the design and optimization for the regenerative braking system.

Experimental Investigation of Hydraulic-Pneumatic Regenerative Braking System

2015 ◽  
Author(s):  
A. G. Agwu Nnanna ◽  
Erik Rolfs ◽  
James Taylor ◽  
Karla Ariadny Freitas Ferreira
Keyword(s):  
Experimental Investigation ◽  
Kinetic Energy ◽  
Power Output ◽  
Energy Recovery ◽  
Scale Model ◽  
Regenerative Braking ◽  
Gear Pump ◽  
Braking System ◽  
Light Duty ◽  
Overall Efficiency

Design and development of energy efficient vehicles is of paramount importance to the automobile industry. Energy efficiency can be enhanced through recovery of the kinetic energy lost in the form of waste heat during braking. The kinetic energy could be converted into a reusable energy source and aid in acceleration, hence the braking system would contribute to improving the overall efficiency of a vehicle. Hydraulic-Pneumatic Regenerative Braking (HPRB) systems are a hybrid drive system that works in tandem with a vehicle’s engine and drivetrain to improve efficiency and fuel-economy. A HPRB system functions by recovering the energy typically lost to heat during vehicle braking, and storing this energy as a reusable source that can propel a vehicle from a stop. The major advantages of a HPRB system are that a vehicle would not require its engine to run during braking to stop, nor would the engine be required to accelerate the vehicle initially from a stop. The benefit realized by this system is an increase in fuel-efficiency, reduced vehicle emissions, and overall financial savings. An HPRB system aids in slowing a vehicle by creating a drag on the driveline as it recovers and stores energy during braking. Therefore, HPRB system operation reduces wear by minimizing the amount of work performed by the brake pads and rotors. An experimental investigation of Hydraulic-Pneumatic Regenerative Braking (HPRB) system was conducted to measure the system’s overall efficiency and available power output. The HPRB in this study is a 1/10th lab-scale model of a light-duty four wheel vehicle. The design/size was based on a 3500 lbs light-duty four wheel vehicle with an estimated passenger weight of 500 lbs. It was assumed that the vehicle can accelerate from 0–15 mph in 2 seconds. The aim of this work is to examine the effect of heat losses due to irreversibility on energy recovery. The experimental facility consisted of a hydraulic pump, two hydraulic-pneumatic accumulators, solenoid and relief valves, and data acquisition system. The HPRB system did not include any driveline components necessary to attach this system onto a vehicle’s chassis rather an electric motor was used to drive the pump and simulate the power input to the system from a spinning drive shaft. Pressure transducers, Hall effects sensor, and thermocouples were installed at suction and discharge sections of the hydraulic and pneumatic components to measure hydrodynamic and thermos-physical properties. The measured data were used to determine the system’s energy recovery and power delivery efficiency. Results showed that the HPRB system is capable of recovering 47% of the energy input to the system during charging, and 64% efficient in power output during discharging with an input and output of 0.33 and 0.21 horsepower respectively. Inefficiencies during operation were attributed to heat generation from the gear pump but especially due to the piston accumulator, where heat loss attributed to a 12% reduction in energy potential alone.

Sign in / Sign up

Export Citation Format

Share Document