scholarly journals Influence of subcutaneous fat thickness on the carcass characteristics and meat quality of beef cattle

2017 ◽  
Vol 48 (1) ◽  
Author(s):  
Bruna Boito ◽  
Fernando Kuss ◽  
Luis Fernando Glasenapp de Menezes ◽  
Eduardo Lisbinski ◽  
Micheli de Paris ◽  
...  

ABSTRACT: The objective of this research was to examine the effect of subcutaneous fat thickness (SFT) on carcass characteristics and meat quality in 24-month-old British and crossbred British steers finished in feedlot systems. It was assessed using meta-analysis performed on data that was extracted from 46 published studies and comprising a total of 2,695 experimental units. We found that SFT was influenced by and increased linearly with hot carcass weights (HCWs) and cold carcass weights (CCWs) and their yields; moreover, the bone fraction decreased whereas the muscle and fat fractions increased with higher levels of SFT. No significant differences were detected in meat quality variables. Thus, SFT appeared to have a direct influence on HCW, CCW, and the weight and yield of bone, muscle, and fat of castrated steers. A uniform fat thickness level of 6.0 mm SFT was determined to be the standard of quality of carcasses and meat products for consumers.

2021 ◽  
Vol 42 (3) ◽  
pp. 1175-1188
Author(s):  
Lucy Mery Antonia Surita ◽  
Marina de Nadai Bonin Gomes ◽  
Brayan Dias Dauria ◽  
Rodrigo da Costa Gomes ◽  
Marilia Williane Filgueira Pereira ◽  
...  

The aim of this study was to evaluate the effects of aging on meat quality of crossbred heifers. Qualitative and quantitative evaluations of carcasses and meat of 148 crossbred heifers with an average age of 13 months and 407.5 ± 29.22 kg body weight at slaughter were performed. After cooling for 24 h, the carcasses were evaluated for hot carcass weight, pH, conformation, physiological maturity, finishing, fat distribution, and length. Characteristics, such as pH, color, marbling, exudation, as well as cooking losses, percentage of ether extract, and shear force were evaluated in meat at time zero and after seven days of aging. The carcasses displayed satisfactory results for parameters such as pH at 24 h of cooling (pH24), finishing, distribution of fat, and subcutaneous fat thickness (5.58, 3.27, 2.40, and 6.62 mm, respectively). The meat had a low marbling score (5.08) and percentage of ether extract (1.71), indicating that the meat was relatively lean. Exudation and cooking losses showed similar results at zero and seven days of aging. The meat subjected to seven days of aging showed higher lightness and hue (40.98 and 0.77, respectively) and tenderness of 5.25 kg. These results indicated that aging affected meat color and shear force parameters; the meat of cross-heifers was softer but less red after maturation.


2018 ◽  
Vol 19 (1) ◽  
pp. 125-135 ◽  
Author(s):  
Urias Fagner Santos Nascimento ◽  
Gladston Rafael de Arruda Santos ◽  
Camilo Santos Azevedo ◽  
Francisco de Assis Fonseca Macedo ◽  
Telisson Ribeiro Gonçalves ◽  
...  

SUMMARY The aim of this study was to evaluate the effect of subcutaneous fat thickness (SFT) on slaughter in lambs ½ Dorper + ½ Santa Inês (DSI) on performance, carcass characteristics and commercial cuts. It was used twenty-four lambs, slaughtered with 2mm, 3mm and 4mm SFT. There was an effect of SFT on performance: for days of confinement (2mm = 51.38, 3mm = 66.50, 4mm = 91.63 days), age at slaughter (2mm = 139.38, 3mm = 159.88, 4mm = 171.00 days), final body weight (2mm = 33.50, 3mm = 42.81, 4mm = 46.19 kg), total weight gain (2mm = 18.75, 3mm = 25.08, 4mm = (2mm = 0.44, 3mm = 0.39, 4mm = 0.28kg), slaughter weight (2mm = 32.76, 3mm = 39.79, 4mm = 44.88 kg), body condition score (2mm = 2.97, 3mm = 3.13, 4mm = 3.56); for carcass characteristics: warm carcass weight (2mm = 15.33, 3mm = 19.16, 4mm = 21.90 kg) and cold (2mm = 15.03, 3mm = 18.75, 4mm = 21.47), cooling losses (2mm = 0.00234; 3mm = 0.00333; 4mm = 0.00201 kg), carcass yields: in the refrigerator (2mm=46,79; 3mm=48,30; 4mm=48,79%); commercial (2mm = 45.88, 3mm = 47.25, 4mm = 47.82%) and true (2mm = 52.93, 3mm = 54.51, 4mm = 55.67%); carcass compactness index (2mm= 0,250; 3mm=0,30; 4mm=0,33 kg/cm) for cut weights; neck (2mm=0,44; 3mm=0,55; 4mm=0,56 kg); palette (2mm=1,38; 3mm=1,61; 4mm=2,14 kg), flank steak (2mm=2,16; 3mm=2,73; 4mm=3,19 kg), loin (2mm=0,93; 3mm=1,14; 4mm=1,25 kg), and leg (2mm=2,68; 3mm=3,20, 4mm=3,76 kg). For the tissue composition of only the muscular cuts of the neck (2mm = 50.24, 3mm = 51.44, 4mm = 55.34%), bone of the neck (2mm = 30.24, 3mm = 29.63, 4mm = 25.91%), of the loin (2mm=15,05; 3mm=24,63; 4mm=24,71%) and the leg (2mm=11,38; 3mm=13,33; 4mm=13,13%), they presented differences between the SFT (p> 0.05). It is recommended to slaughter lambs ½ Dorper + ½ Santa Inês with 3mm of SFT.


2021 ◽  
Vol 51 (1) ◽  
Author(s):  
A.F. De Moura ◽  
D.C.A. Filho ◽  
I.L. Brondani ◽  
L.B. Pereira ◽  
G. Joner ◽  
...  

The aim of this study was to evaluate the effects of various dietary energy levels on the carcass and meat characteristics of feedlot-finished steers. A total of 27 purebred and crossbred Charolais and Nellore steers were used, with a mean initial age of 22 months and weight of 253 kg. The animals were allotted to a completely randomized design with three treatments and nine replicates each. Dietary treatments were arranged so that the average forage to concentrate ratio (FCR) was equivalent to that of a constant FCR treatment. The treatments consisted of CT (constant FCR at 60 to 40), CT5 (starting with 70: 30 FCR and finishing with 50: 50 FCR, that is, a mean overall FCR of 60: 40), and CT10 (starting with 80: 20 FCR and finishing with 40: 60, that is, a mean overall FCR of 60: 40). The dietary treatments did not affect slaughter weight, carcass weight, carcass conformation, physiological maturity, subcutaneous fat thickness, ribeye area, marbling score, and carcass measurements or the yield of commercial cuts. Chilling loss was higher in CT10 steers (2.41%) than in CT (2.26%) and CT5 (2.15%).


2019 ◽  
Vol 40 (2) ◽  
pp. 855
Author(s):  
Juliano Henriques da Motta ◽  
Cleber Cassol Pires ◽  
Ana Maria Osorio Dias ◽  
Verônica Gindri Manzoni ◽  
Andressa Ana Martins ◽  
...  

The aim of this study was to assess the influence of different finishing systems on the in vivo measurements, quantitative and qualitative carcass characteristics, commercial cut ratio, and shoulder tissue composition of lambs. Thirty-two male lambs were distributed in four finishing systems with eight replications each, as follows: suckling lambs on pasture; suckling lambs in confinement, with access to creep-feeding containing corn bran and soybean meal; weaned lambs fed roughage, characterized by ad libitum supply of alfalfa hay; and weaned lambs fed concentrate, composed of oat grain and soybean meal. The lambs were slaughtered as they reached the pre-set live weight at slaughtering of 30 kg. Most of the in vivo biometry variables were not significant (P > 0.05) when comparing the finishing systems, except for hindlimb height and thoracic perimeter. Regarding the quantitative carcass characteristics, all variables differed (P < 0.05) between systems, except for carcass length, leg width, and subcutaneous fat thickness. For the qualitative carcass characteristics, only the fatness and carcass conformation presented significant differences (P < 0.05). Most in vivo measurements and the proportion of carcass cuts were not influenced by finishing systems. Weaned lambs fed an exclusive concentrate diet presented leaner carcasses with an inferior conformation when compared to the other finishing systems. Suckling lambs in confinement presented shoulders with a higher fat deposition when compared to those weaned. Suckling lambs both on pasture and in confinement presented a superiority in the quantitative carcass characteristics when compared to weaned lambs.


2019 ◽  
Vol 97 (Supplement_3) ◽  
pp. 422-423
Author(s):  
Janaina S Biava ◽  
Nathalia R Eckermann ◽  
Thamires U Sturion ◽  
Daniel M Polizel ◽  
Paulo Dias Junior ◽  
...  

Abstract The objectives of this trial were to evaluate the effects of levels of fiber in high-grain diets on carcass characteristics of feedlot lambs. Fifty-eight Dorper x Santa Inês ram lambs (initial BW 20.7 ± 1.19 kg and 75 ± 10.83 d old) were assigned to a randomized complete block design. The treatments were defined by the fiber (“Coastcross” hay) content in the diets (CP: 16,12% ± 0.92): 0F: no forage diet (NDF: 10.4%); 5F: 5% of forage (NDF: 12.1%); 10F: 10% of forage (NDF: 15.0%); 15F: 15% of forage (NDF: 15.5%); 20F: 20% of forage (NDF: 20.8%) and 25F: 25% of forage (NDF: 23.5%). The experiment lasted 89 days, at the end of this time, the animals were slaughtered (169 ± 10.83 d old) to evaluate carcass characteristics. There was a quadratic response for slaughter BW (0F: 46.3; 5F: 48.1; 10F: 49.4; 15F: 50.3; 20F: 48.5; 25F: 43.3 kg; P &lt; 0.01), hot carcass weight (0F: 24.8; 5F: 25.6; 10F: 26.0; 15F: 25.7; 20F: 24.3; 25F: 21.8 kg; P = 0.01), cold carcass weight (0F: 24.3; 5F: 25.1; 10F: 25.4; 15F: 25.1; 20F: 23.8; 25F: 21.2 kg; P = 0.01) and longissimus dorsis area (0F: 16.3; 5F: 16.5; 10F: 17.4; 15F: 16.5; 20F: 16.0; 25F: 15.1 cm2; P = 0.04). There was a linear decrease in the hot carcass yield (0F: 53.0; 5F: 53.3; 10F: 52.5; 15F: 50.9; 20F: 50.1; 25F: 50.2%; P &lt; 0.01), cold carcass yield (0F: 52.0; 5F: 52.2; 10F: 51.4; 15F: 49.8; 20F: 49.0; 25F: 48.9%; P &lt; 0.01) and body wall thickness (0F: 16.2; 5F: 17.0; 10F: 16.3; 15F: 16.3; 20F: 15.1; 25F: 13.6 kg; P = 0.01). There was no effect on subcutaneous fat thickness. In conclusion, the diet with up to 5% of forage allowed higher carcass yield; however, the heavier carcasses were produced by the lambs that received 10F diet.


2009 ◽  
Vol 61 (3) ◽  
pp. 648-654 ◽  
Author(s):  
R.C. Gomes ◽  
P.R. Leme ◽  
S.L. Silva ◽  
M.T. Antunes ◽  
C.F. Guedes

To evaluate the effects of the supplementation of feed additives on carcass quality in beef cattle, 72 Nellore steers (339.5kg, 20-month old) were feedlot finished and fed for 91 days one of the following diets: 1) control with no additives; or added of 2) live yeast culture; 3) monensin; or 4) the association of both additives. After slaughter, renal, pelvic, and inguinal fat and hot carcass weights were recorded and carcass was split into muscle, bone, and trimmable fat. Carcass Longissimus muscle area and subcutaneous fat thickness at the 12th rib were measured and steaks of Longisimus muscle were taken to determine meat color, shear force, drip, and cooking losses. Yeast increased carcass dressing percentage but there were no effects on hot carcass weight, Longissimus area, subcutaneous fat thickness, percentage and weight of retail cut yield and trimmings. Feed additives had no effect on carcass pH, meat color, fat content, shear force, and drip losses. Supplementation of yeast, monensin or the association of both additives had no important effects on carcass traits and on meat quality of feedlot finished steers.


2018 ◽  
Vol 58 (2) ◽  
pp. 350 ◽  
Author(s):  
R. M. S. Carvalho ◽  
C. A. Boari ◽  
S. D. J. Villela ◽  
A. V. Pires ◽  
M. H. F. Mourthé ◽  
...  

Our objectives were to assess quality parameters and chemical composition, and to evaluate the effects of sex, muscle and aging time on the quality of meats from Wagyu × Angus cross cattle reared under tropical conditions. Analyses were performed on the longissimus thoracis, semitendinosus and triceps brachii muscles obtained from chilled carcasses of a total of 30, 24-month-old, male (immunocastrated) and female animals (15 each sex). An effect of sex (P ≤ 0.05) was observed for subcutaneous fat thickness, marbling score, and ribeye area. The longissimus thoracis muscle from males was less (P < 0.0001) marbled than that from females, but males had greater subcutaneous fat thickness (P = 0.0001) and greater ribeye area (P = 0.0411) compared with females. No effect of sex (P ≥ 0.05) was observed for fat colour measures. An interaction effect of sex and muscle (P < 0.03) was detected for cooking loss, yellow intensity (b*), ash, and fat. Main effect of sex was not observed (P > 0.07) only for the ultimate pH and water-holding capacity. Greater shear force and moisture values were observed (P < 0.01) in meat from males than that from females, but a greater value of luminance (L*), red intensity (a*), chroma (C), hue (Ho), dry matter and protein was observed (P < 0.001) in meat from females than that from males. Main effect of muscle was not observed only for water-holding capacity (P = 0.13). Ultimate pH and shear force values were lesser (P < 0.001) in the longissimus thoracis muscle compared with other muscles. The triceps brachii muscle had the least (P ≤ 0.001) L* and Ho values among muscles, whereas the semitendinosus muscle had the greatest values of a* and C (P < 0.001). The semitendinosus muscle presented the greatest (P < 0.01) protein content compared with other muscles, although not differing in moisture and dry matter content from the triceps brachii muscle. An interaction effect of sex × aging time was observed for ultimate pH (P = 0.0110), meat colour parameters (except for Ho; P ≤ 0.01), and fat L* (P = 0.0025). Greater cooking loss, shear force, and fat a* values were observed (P < 0.01) in meat from males than that from females, but greater values of meat Ho, fat a* and Ho, dry matter, and protein were observed (P ≤ 0.03) in meat from females than that from males. Meat aging of longissimus thoracis reduced shear force. Based on these findings, we recommend that meat from Wagyu × Angus cross cattle should be aged during 7 days because, although differences between 7 and 14 days were observed in either aging times, meat subjected to this process is considered as very tender, based on shear force values. In addition, aging in a shorter period of time can reflect on costs by reducing particularly those related with energy, due to less refrigeration time.


2016 ◽  
Vol 14 (3) ◽  
pp. e0604 ◽  
Author(s):  
Guillermo Ripoll ◽  
Pere Albertí ◽  
Javier Alvarez-Rodríguez ◽  
Isabel Blasco ◽  
Albina Sanz

The aim of this study was to analyse three commercial beef categories of the ‘Serrana de Teruel breed’ to define the appropriate commercial option. Twenty ‘Serrana de Teruel’ male calves at 9 months were assigned to the commercial beef categories (young bulls, bulls and steers), slaughtered at 12, 22 and 22 months of age, respectively. The in vivo ultrasound backfat thickness was greater than the dorsal fat thickness, and the young bulls and steers had a similar fat thickness, that was greater than the bulls in both areas. The slaughter weight and cold carcass weight were significantly different between the commercial categories. However, the differences were not sufficient to modify the dressing percentage, carcass conformation and fatness degree between the young bulls and bulls. The maximum stress of the muscle at 7 d of ageing was lower in the steers than in the young bulls and bulls. In general, the lightness of the meat in the bulls was lower than that in the young bulls and steers. The subcutaneous fat of the bull carcasses had a vivid colour and stored more carotenoids than that of the young bulls and steers. Hence, bulls produced heavier and better conformed carcasses with more edible meat and less fat than the other categories. However, steers are recommended to produce large carcasses with more trim and cover fat than the other categories. Finally, it seems that bulls are the most suitable commercial category to ‘Serrana de Teruel’ breed.


2019 ◽  
Vol 59 (9) ◽  
pp. 1752 ◽  
Author(s):  
M. M. Della Rosa ◽  
E. Pavan ◽  
S. Maresca ◽  
M. Spetter ◽  
F. Ramiro

To evaluate the effect of grazing cattle temperament on performance, as well as carcass and meat quality traits, exit velocity (EV) was assessed throughout two production cycles (PC1, n = 38 and PC2, n = 52). Individual EV determinations were assessed throughout each PC and then 100-days period averages were calculated for each animal. Animals were ranked based on their EV (EV-RANK) in the first 100-days period as SLOW, FAST and MEDIUM. The EV decreased from weaning to slaughter in FAST and MEDIUM (P &lt; 0.05); but did not change in SLOW (P &gt; 0.10). Initial liveweight was lowest in FAST and highest in MEDIUM (P = 0.03). DM intake (P = 0.08) and average daily gain (P = 0.94) were not affected by EV-RANK, but carcass subcutaneous fat thickness was lowest in FAST and highest in MEDIUM (P = 0.02). Longissimus muscle colour and shear-force were not affected by EV-RANK (P &gt; 0.05), but muscle glycogen content at slaughter was higher in MEDIUM than in SLOW or FAST (P = 0.047). No EV-RANK effects were observed in the present study on meat colour and shear-force. However, its effects on subcutaneous fat thickness and muscle glycogen could result in low meat quality of temperamental cattle under more stressful handling situations.


2017 ◽  
Vol 8 (s1) ◽  
pp. s22-s27 ◽  
Author(s):  
M. Al-Jammas ◽  
J. Agabriel ◽  
J. Vernet ◽  
I. Ortigues-Marty

In cattle, the chemical composition of the carcass is usually evaluated from one of three reference methods (rib dissection, specific gravity or a combination of easily obtained measures) or is estimated from proxy traits (USDA yield grade (YG), subcutaneous fat thickness (SFT)). Objectives were to evaluate if the relationships between the chemical composition of the carcass and each of the proxy traits (YG, SFT) differed depending on the reference method. The study was conducted by meta-analysis from published results using 25 publications that reported carcass composition and proxy traits (53%, 31% and 16% of the data were based on rib dissection, specific gravity and combination of easily obtained measures, respectively). Results showed that the amounts of carcass fat or protein that can be predicted from a given proxy trait (YG or SFT) differ significantly with the reference method used to determine carcass fat or protein.


Sign in / Sign up

Export Citation Format

Share Document