scholarly journals Mechanical properties of concrete reinforced with hybrid polypropylene- PET waste fibers

2021 ◽  
Vol 8 (1) ◽  
pp. 10-22
Author(s):  
Sary Hussein ◽  
◽  
Azad Mohammed
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Fiber Length ◽  
Laboratory Experiments ◽  
Polypropylene Fiber ◽  
Strength Reduction ◽  
Hybrid Fiber ◽  
Good Opportunity ◽  
Pet Waste ◽  
Compressive Strength Of Concrete

In this article, flexural strength and compressive strength of concrete containing polypropylene fiber (PP), polyethylene terephthalate (PET) waste fiber and a combination between them were experimentally investigated. For this reason, laboratory experiments were performed on a total of 40 mixes. Results show that compressive strength property of concrete reinforced with PET waste fiber is not comparable to that of concrete reinforced with PP fiber, in which there is a compressive strength reduction, and the effect of PET fiber length on the strength is not important. Behavior of concrete contained PET waste fiber in flexure was found better. There is a good opportunity to use a hybrid fiber (25% PET and 75% PP) to enhance flexural strength of concrete.

scholarly journals Orthogonal Analysis on Mechanical Properties of Basalt–Polypropylene Fiber Mortar

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2937
Author(s):  
Huimin Chen ◽  
Chunyan Xie ◽  
Chao Fu ◽  
Jing Liu ◽  
Xiuli Wei ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Content ◽  
Fiber Length ◽  
Content Volume ◽  
Polypropylene Fiber ◽  
Basalt Fiber ◽  
Test Method ◽  
Test Results ◽  
Fiber Volume

Orthogonal test method was applied to analyze the strength properties of basalt-polypropylene mortar. The effect of basalt fiber length, polypropylene fiber length, basalt fiber volume content and polypropylene fiber volume content on the 28 d cube compressive strength and flexural strength were investigated. Test results show that comparing with flexural strength, the influence of basalt fiber length and polypropylene fiber length on compressive strength of mortar was greater than on flexural strength. The length of polypropylene fibers contributes the highest to the flexural strength. The effect of basalt fiber on mortar strength is the largest with 6 mm length and 4% content. Polypropylene fiber length has the greatest influence on the compressive strength of fiber mortar, followed by basalt fiber volume content. Volume content of polypropylene fiber has the greatest influence on flexural strength of fiber mortar, followed by polypropylene fiber length. According to the scoring of the efficacy coefficient method, the best ratio combination for compressive and flexural strength was the basalt fiber length of 9 mm, polypropylene fiber length of 6 mm, basalt fiber volume content of 4% and polypropylene fiber volume content of 4%. Compared with the blank samples, the 28 d compressive strength and 28 d flexural strength of the cement mortar samples were increased by 27.4% and 49% respectively. According to the test results, the properties of the fiber were analyzed and evaluated and the mechanism of fiber action and fiber microstructure were analyzed.

Orthogonal Experimental Study on Properties of Hybrid Fiber Reinforced Cement Mortar

2010 ◽  
Vol 168-170 ◽  
pp. 456-459
Author(s):  
Hai Yan Yuan ◽  
Shui Zhang ◽  
Guo Zhong Li
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Steel Fiber ◽  
Cement Mortar ◽  
Polypropylene Fiber ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Factors Affecting ◽  
Fiber Fraction ◽  
Reinforced Cement

By adopting the method of orthogonal experimental design, the effect of three independent variables, that is steel fiber fraction, polypropylene fiber fraction and silica fume fraction on the compressive strength, flexural strength and shrinkage of cement mortar was studied. The results indicate that steel fiber is one of the most important factors affecting compressive strength and shrinkage, and polypropylene fiber is one of the most important factors affecting flexural strength and shrinkage of cement mortar. By using deviation analysis to analyze the orthogonal experiment results, the optimized mix proportion of hybrid fiber reinforced cement mortar is determined. The hybrid effect of steel fiber and polypropylene fiber on the properties of cement mortar is discussed.

Experimental Study of Compression for Multi-Scale Polypropylene Fiber Concrete

2012 ◽  
Vol 174-177 ◽  
pp. 1584-1588 ◽  
Author(s):  
Ning Hui Liang ◽  
Xin Rong Liu ◽  
Ji Sun
Keyword(s):  
Compressive Strength ◽  
Polypropylene Fiber ◽  
Plain Concrete ◽  
Compression Tests ◽  
Concrete Compressive Strength ◽  
Hybrid Fiber ◽  
Multi Scale ◽  
Fine Fiber ◽  
Fiber Concrete ◽  
Compressive Strength Of Concrete

Through compression tests on 30 plain concrete and polypropylene fiber concrete specimens with the dimensions of 100mm × 100mm × 100mm , studied the influence of the different scales of polypropylene fiber and hybrid fiber on concrete compressive strength and compressive deformation. The results showed that: the compressive strength of concrete for single-doped fiber has little effect to improve concrete compressive strength, some even get lower,but mixing-doped coarse-fine fiber had increased 6.2%~13.7%. Doped-fiber can improve the concrete compressive toughness, it's enhancement sort: mixing-doped coarse-fine fiber concrete > single-doped coarse fiber concrete > single-doped fine fiber concrete> plain concrete

scholarly journals Study on Steel and polypropylene hybrid fiber reinforced concrete– A review

YMER Digital ◽  
2021 ◽  
Vol 20 (11) ◽  
pp. 421-430
Author(s):  
M. Sriram ◽  
◽  
K.R. Aswin Sidhaarth ◽  
◽  
◽  
...  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Hybrid Fiber ◽  
Hybrid Fibers ◽  
Split Tensile Strength

Increasing demand and inadequate materials availability leads the researchers to find alternate materials. In general, hybrid fiber is nothing but mixture of two or more fibers. In this review, various properties of steel fibers and polypropylene fibers were studied. In order to study the physical and mechanical properties of steel fiber, polypropylene fiber and other materials used in concrete, various tests such as Slump cone test, Compaction factor, Compressive strength , flexural strength etc., were used. Hybrid fibers have the tendency to control cracks at different levels. Workability of concrete get reduced due to more addition of steel fibers.The addition of steel fiber and polypropylene fiber results in an increase of 12 to 14.30% compressive strength, 33 to 36.6% increase in flexural strength and 9 to 10.16% increase in split tensile strength. Addition of most favorable amount 0.9 to 1% of steel fiber and 0.9 to 1% of polypropylene fiber gives maximum compressive strength up to 41.67 to 42.68%. Split tensile strength increases by increasing the fiber content in concrete but workability decreases when steel fiber content is increased in concrete.

Polypropylene Fiber Reinforced Concrete for Airport Rigid Pavements: Compressive and Flexural Strength

2011 ◽  
Vol 219-220 ◽  
pp. 1601-1607 ◽  
Author(s):  
Tammam Merhej ◽  
Xin Kai Li ◽  
De Cheng Feng
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Linear Regression Analysis ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Rigid Pavements ◽  
Polypropylene Fiber Reinforced Concrete

This paper presents the experimental investigation carried out to study the behavior of polypropylene fiber reinforced concrete (PPFRC) under compression and flexure. Crimped polypropylene fibers and twisted polypropylene fiber were used with 0.0%, 0.2%, 0.4% and 0.6% volume fractions. The influence of the volume fraction of each shape of polypropylene fiber on the compressive strength and flexural strength is presented. Empirical equations to predict the effect of polypropylene fiber on compressive and flexural strength of concrete were proposed using linear regression analysis. An increase of 27% in flexural strength was obtained when 0.6% volume fraction of twisted polypropylene fiber was added. It was also found that the contribution of fiber in flexural strength is more effective when twisted fibers were used. The compressive strength was found to be less affected by polypropylene fiber addition.

Mechanical Properties of Polypropylene Fiber Concrete after High Temperature

2014 ◽  
Vol 662 ◽  
pp. 24-28 ◽  
Author(s):  
Xi Du ◽  
You Liang Chen ◽  
Yu Chen Li ◽  
Da Xiang Nie ◽  
Ji Huang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Polypropylene Fiber ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Concrete ◽  
Compressive Strength Of Concrete ◽  
Polypropylene Fiber Reinforced Concrete

With cooling tests on polypropylene fiber reinforced concrete and plain concrete that were initially subjected to different heating temperatures, the change of mechanical properties including mass loss, uniaxial compressive strength and microstructure were analyzed. The results show that the compressive strength of concrete tend to decrease with an increase in temperature. After experiencing high temperatures, the internal fibers of the polypropylene fiber reinforced concrete melted and left a large number of voids in it, thereby deteriorating the mechanical properties of concrete.

Effect of Polypropylene Fiber on Strength and Flexural Properties of Concrete Containing Silica Fume

2011 ◽  
Vol 346 ◽  
pp. 30-33
Author(s):  
Hong Wei Wang
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Silica Fume ◽  
Modulus Of Elasticity ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Flexural Modulus ◽  
Polypropylene Fiber ◽  
Flexural Properties ◽  
Fiber Volume

A designed experimental study has been conducted to investigate the effect of polypropylene fiber on the compressive strength and flexural properties of concrete containing silica fume, a large number of experiments have been carried out in this study. The flexural properties include flexural strength and flexural modulus of elasticity. On the basis of the experimental results of the specimens of six sets of mix proportions, the mechanism of action of polypropylene fiber on compressive strength, flexural strength and flexural modulus of elasticity has been analyzed in details. The results indicate that there is a tendency of increase in the compressive strength and flexural strength, and the flexural modulus of elasticity of concrete containing silica fume decrease gradually with the increase of fiber volume fraction.

Experimental Study on Axial Tensile Strength of Low Volume Fraction of Ternary Hybrid Fiber Reinforced Concrete

2014 ◽  
Vol 906 ◽  
pp. 329-334
Author(s):  
Yu Ting Zhu ◽  
Dong Tao Xia ◽  
Bo Ru Zhou
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Strength Test ◽  
Splitting Tensile Strength ◽  
National Standard ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Advantages And Disadvantages

In this paper, according to the national standard and testing methods,the direct tension strength,splitting tensile strength and cubic compressive strength test were carried out for 8 different groups of hybrid fiber (containing steel fiber, macro-polypropylene fiber and dura fiber) reinforced HPC specimens.The results showed that when the volume proportion of ternary hybrid fiber was less than 1%, there was not obvious influence for the concrete compressive strength, but the splitting tensile strength increased by 26% ~ 69%; the ratio between splitting tensile strength and compressive strength for HFRC increased to 1/12~1/9. When added 0.7% steel fiber, 0.19% macro-polypropylene fiber and 0.11% dura fiber, the confounding effect was the best. Based on the advantages and disadvantages of tensile splitting strength and direct tensile strength test and the results of tests, the concept of equivalent tensile strength and calculative formula was put forward .

scholarly journals TENSILE, COMPRESSIVE AND FLEXURAL STRENGTH REDUCTION OF TIMBER IN FIRE

2009 ◽  
Vol 1 (3) ◽  
pp. 148-156 ◽  
Author(s):  
Zoja Bednarek ◽  
Mečislavas Griškevičius ◽  
Gintas Šaučiuvėnas
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Reduction Rate ◽  
Strength Reduction ◽  
Timber Structures ◽  
Static Tests ◽  
Reduction Coefficient ◽  
Temperature Ranges ◽  
In Fire ◽  
Linear Expression

The present research was dedicated to investigation into the strength of timber structures under fire conditions. Two kinds of timber specimens including oak and pine were used. The carried out investigation covered static tests on tensile strength, compressive strength along the grain, compressive strength perpendicular to the grain and flexural strength. The specimens were tested under the temperatures of 50°C, 100°C, 150°C, 200°C and 230°C. The obtained results show that pine specimens have better properties over the entire temperature range in case of tests on tensile and flexural strength. Also, as for these types of strength, oak specimens show a higher strength reduction rate than those of pine specimens, whereas oak specimens have better properties over the entire temperature ranges in case of compressive strength perpendicular to the grain. Based on statistical analysis, a linear expression of the strength reduction coefficient was proposed.

scholarly journals Tests on workability and strength of high strength-flowable concrete containing PET waste fiber

2020 ◽  
Vol 7 (3) ◽  
pp. 115-139
Author(s):  
Sarkawt Karim ◽  
◽  
Azad Mohammed ◽  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fiber Length ◽  
High Strength ◽  
Fiber Reinforced Concrete ◽  
Time Increase ◽  
Fiber Volume ◽  
Split Tensile Strength ◽  
Pet Waste ◽  
Strength Tests

This study describes two workability tests, compressive strength and tensile strength tests of high strength flowable concrete containing plastic fiber prepared from polyethylene terephthalate (PET) waste bottles. For the high fluidity mix Vebe time and V-funnel time tests were carried out. Results show that there is a Vebe time increase with PET fiber addition to concrete being increased with increasing fiber volume and fiber length. V-funnel time was found to reduce when up to 0.75% fiber volume is added to concrete, followed by an increase for larger fiber volumes. When fiber length is increase, there is more time increase, but in general, V-funnel time increase was lower than that of Vebe time, indicating a different influence of PET fiber on the compatibility and flowability. The measured V-funnel time for all mixes was found to conform to the limits of European specifications on the flowability of self compacting concrete. Small descending in compressive strength was recorded for RPET fiber reinforced concrete that reached 15.74 % for 1.5 percent fiber content with 10 mm fiber length. Attractive results was recorded in split tensile strength of RPET fibrous samples which resulted in improvement up to 63.3 % for 1.5 percent of 40 mm fiber length content.

Sign in / Sign up

Export Citation Format

Share Document