On High-Performance Airfoil at Very Low Reynolds Number

2016 ◽  
Vol 28 (3) ◽  
pp. 273-285
Author(s):  
Katsuya Hirata ◽  
◽  
Ryo Nozawa ◽  
Shogo Kondo ◽  
Kazuki Onishi ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Flat Plate ◽  
High Performance ◽  
Low Reynolds Number ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Aerodynamic Characteristics ◽  
Slow Flow ◽  
Low Reynolds Numbers ◽  
Low Reynolds

[abstFig src='/00280003/02.jpg' width=""300"" text='Iso-Q surfaces of very-slow flow past an iNACA0015' ] The airfoil is often used as the elemental device for flying/swimming robots, determining its basic performances. However, most of the aerodynamic characteristics of the airfoil have been investigated at Reynolds numbers Re’s more than 106. On the other hand, our knowledge is not enough in low Reynolds-number ranges, in spite of the recent miniaturisation of robots. In the present study, referring to our previous findings (Hirata et al., 2011), we numerically examine three kinds of high-performance airfoils proposed for very-low Reynolds numbers; namely, an iNACA0015 (the NACA0015 placed back to front), an FPBi (a flat plate blended with iNACA0015 as its upper half) and an FPBN (a flat plate blended with the NACA0015 as its upper half), in comparison with such basic airfoils as a NACA0015 and an FP (a flat plate), at a Reynolds number Re = 1.0 × 102 using two- and three-dimensional computations. As a result, the FPBi shows the best performance among the five kinds of airfoils.

scholarly journals Aerodynamic characteristics of owl like airfoil at low reynolds number.

2022 ◽  
pp. 26-34
Author(s):  
Ishfaq Fayaz ◽  
Syeeda Needa Fathima ◽  
Y.D. Dwivedi
Keyword(s):  
Reynolds Number ◽  
Separation Bubble ◽  
Low Reynolds Number ◽  
Suction Side ◽  
Reynolds Numbers ◽  
Aerodynamic Characteristics ◽  
Pressure Side ◽  
Low Reynolds Numbers ◽  
Lift Curve ◽  
Low Reynolds

The computational investigation of aerodynamic characteristics and flow fields of a smooth owl-like airfoil without serrations and velvet structures.The bioinspired airfoil design is planned to serve as the main-wing for low-reynolds number aircrafts such as (MAV)micro air vechiles.The dependency of reynolds number on aerodynamics could be obtained at low reynolds numbers.The result of this experiment shows the owl-like airfoil is having high lift performance at very low speeds and in various wind conditions.One of the unique feature of owl airfoil is a separation bubble on the pressure side at low angle of attack.The separation bubble changes location from the pressure side to suction side as the AOA (angle of attack) increases. The reynolds number dependancy on the lift curve is insignificant,although there’s difference in drag curve at high angle of attacks.Eventually, we get the geometric features of the owl like airfoil to increase aerodynamic performance at low reynolds numbers.

scholarly journals Characteristics of an Annular Turbine Cascade at Low Reynolds Numbers

1998 ◽  
Author(s):  
Takayuki Matsunuma ◽  
Hiroyuki Abe ◽  
Yasukata Tsutsui ◽  
Koji Murata
Keyword(s):  
Reynolds Number ◽  
Gas Turbines ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Boundary Layer Separation ◽  
Aerodynamic Characteristics ◽  
Secondary Flows ◽  
Suction Surface ◽  
Low Reynolds Numbers ◽  
Low Reynolds

The aerodynamic characteristics of turbine cascades are thought to be relatively satisfactory due to the favorable pressure gradient of the accelerating flow. But within the low Reynolds number region of approximately 6×104 where the 300kW ceramic gas turbines which are being developed under the New Sunshine Project of Japan operate, the characteristics such as boundary layer separation, reattachment and secondary flow which lead to prominent power losses can not be easily predicted. In this research, experiments have been conducted to evaluate the performance of an annular turbine stator cascade. Wakes of the cascade were measured using a single hot wire and five hole pressure tube, for a range of blade chord Reynolds numbers based on the inlet condition from 2×104 to 12×104. Flow visualizations on the suction surface of the blade were carried out using oil film method. At low Reynolds numbers, the flow structure in the annular cascade was quite complex and three-dimensional. The separation line on the suction surface moved upstream due to the decrease of Reynolds number. In addition, the growth of secondary flows, i.e., passage vortices and leakage vortex, was extremely under the influence of Reynolds number.

A Computational Study on Airfoils at a Low Reynolds Number

2000 ◽  
Author(s):  
Ajit Pal Singh ◽  
S. H. Winoto ◽  
D. A. Shah ◽  
K. G. Lim ◽  
Robert E. K. Goh
Keyword(s):  
Reynolds Number ◽  
Computational Analysis ◽  
Computational Study ◽  
Low Reynolds Number ◽  
Micro Air Vehicles ◽  
Reynolds Numbers ◽  
Aerodynamic Performance ◽  
Low Reynolds Numbers ◽  
Study Results ◽  
Low Reynolds

Abstract Performance characteristics of some low Reynolds number airfoils for the use in micro air vehicles (MAVs) are computationally studied using XFOIL at a Reynolds number of 80,000. XFOIL, which is based on linear-vorticity stream function panel method coupled with a viscous integral formulation, is used for the analysis. In the first part of the study, results obtained from the XFOIL have been compared with available experimental data at low Reynolds numbers. XFOIL is then used to study relative aerodynamic performance of nine different airfoils. The computational analysis has shown that the S1223 airfoil has a relatively better performance than other airfoils considered for the analysis.

Experimental characterization of three-dimensional corner flows at low Reynolds numbers

2012 ◽  
Vol 707 ◽  
pp. 37-52 ◽  
Author(s):  
J. Sznitman ◽  
L. Guglielmini ◽  
D. Clifton ◽  
D. Scobee ◽  
H. A. Stone ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Secondary Flows ◽  
Channel Cross Section ◽  
Experimental Characterization ◽  
Low Reynolds Numbers ◽  
Low Reynolds

AbstractWe investigate experimentally the characteristics of the flow field that develops at low Reynolds numbers ($\mathit{Re}\ll 1$) around a sharp $9{0}^{\ensuremath{\circ} } $ corner bounded by channel walls. Two-dimensional planar velocity fields are obtained using particle image velocimetry (PIV) conducted in a towing tank filled with a silicone oil of high viscosity. We find that, in the vicinity of the corner, the steady-state flow patterns bear the signature of a three-dimensional secondary flow, characterized by counter-rotating pairs of streamwise vortical structures and identified by the presence of non-vanishing transverse velocities (${u}_{z} $). These results are compared to numerical solutions of the incompressible flow as well as to predictions obtained, for a similar geometry, from an asymptotic expansion solution (Guglielmini et al., J. Fluid Mech., vol. 668, 2011, pp. 33–57). Furthermore, we discuss the influence of both Reynolds number and aspect ratio of the channel cross-section on the resulting secondary flows. This work represents, to the best of our knowledge, the first experimental characterization of the three-dimensional flow features arising in a pressure-driven flow near a corner at low Reynolds number.

Numerical investigation of the effect of triangular cavity on the unsteady aerodynamics of NACA 0012 at a low Reynolds number

2021 ◽  
pp. 095441002110270
Author(s):  
Rajesh Yadav ◽  
Aslesha Bodavula
Keyword(s):  
Reynolds Number ◽  
Steady State ◽  
Unsteady Aerodynamics ◽  
Reynolds Numbers ◽  
Aerodynamic Characteristics ◽  
Accurate Solution ◽  
Low Reynolds Numbers ◽  
State Regime ◽  
Low Reynolds ◽  
Naca 0012

Time accurate numerical simulations were conducted to investigate the effect of triangular cavities on the unsteady aerodynamic characteristics of NACA 0012 airfoil at a Reynolds number of 50,000. Right-angled triangular cavities are placed at 10%, 25% and 50% chord location on the suction and have depths of 0.025c and 0.05c, measured normal to the surface of the airfoil. The second-order accurate solution to the RANS equations is obtained using a pressure-based finite volume solver with a four-equation transition turbulence model, γ–Re θt, to model the effect of turbulence. The two-dimensional results suggest that the cavity of depth 0.025c at 10% chord improves the aerodynamic efficiency ( l/d ratio) by 52%, at an angle of attack of α = 8°, wherein the flow is steady. The shallower triangular cavity when placed at 25%c and 50%c enhances the l/d ratio by only 10% and 17%, respectively, in the steady-state regime of angles of attack between α = 6° and 10°. The deeper cavity also enhances the l/d ratio by up to 13%, 22% and 14% at angles of attack between α = 6° and 10°. Even in the unsteady vortex shedding regime, at α =12° and higher, significant improvements in the time-averaged l/d ratios are observed for both cavity depths. The improvements in l/d ratio in the steady-state, pre-stall regime are primarily because of drag reduction while in the post-stall, unsteady regime, the improvements are because of enhancements in time-averaged C l values. The current finding can thus be used to enhance the aerodynamic performance of MAVs and UAVs that fly at low Reynolds numbers.

Advanced High Turning Compressor Airfoils for Low Reynolds Number Condition—Part I: Design and Optimization

2004 ◽  
Vol 126 (3) ◽  
pp. 350-359 ◽  
Author(s):  
Toyotaka Sonoda ◽  
Yoshihiro Yamaguchi ◽  
Toshiyuki Arima ◽  
Markus Olhofer ◽  
Bernhard Sendhoff ◽  
...  
Keyword(s):  
Reynolds Number ◽  
High Performance ◽  
Guide Vane ◽  
Incidence Angle ◽  
Low Reynolds Number ◽  
Three Dimensional ◽  
Optimization Methods ◽  
Superior Performance ◽  
Experimental Investigations ◽  
Low Reynolds

High performance compressor airfoils at a low Reynolds number condition at Re=1.3×105 have been developed using evolutionary algorithms in order to improve the performance of the outlet guide vane (OGV), used in a single low pressure turbine (LPT) of a small turbofan engine for business jet aircrafts. Two different numerical optimization methods, the evolution strategy (ES) and the multi-objective genetic algorithm (MOGA), were adopted for the design process to minimize the total pressure loss and the deviation angle at the design point at low Reynolds number condition. Especially, with respect to the MOGA, robustness against changes of the incidence angle is considered. The optimization process includes the representation of the blade geometry, the generation of a numerical grid and a blade-to-blade analysis using a quasi-three-dimensional Navier-Stokes solver with a k-ω turbulence model including a newly implemented transition model to evaluate the performance. Overall aerodynamic performance and boundary layer properties for the two optimized blades are discussed numerically. The superior performance of the two optimized airfoils is demonstrated by a comparison with conventional controlled diffusion airfoils (CDA). The advantage in performance has been confirmed by detailed experimental investigations, which are presented in Part II of this paper.

Validation of Numerical Analysis to Estimate Airfoil Aerodynamic Characteristics at Low Reynolds Number Region

2015 ◽  
Author(s):  
Donghwi Lee ◽  
Taku Nonomura ◽  
Akira Oyama ◽  
Kozo Fujii
Keyword(s):  
Reynolds Number ◽  
Numerical Method ◽  
Low Reynolds Number ◽  
Lift Coefficient ◽  
Three Dimensional ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Eddy Simulation ◽  
Low Reynolds

In this study, two-dimensional laminar simulation (2-D Lam), two-dimensional Reynolds Averaged Navier-Stokes simulation with the Spalart-Allmaras turbulence model (2-D RANS(SA)), and implicit three-dimensional large-eddy simulation (3-D LES) are performed for NACA0012, NACA0006, and Ishii airfoils at Rec = 3.0 × 104. The relation between a predictability of airfoil aerodynamic characteristics and a dependence of airfoil geometry shape of each numerical method is evaluated at the low Reynolds number. Although little discrepancy is observed for the lift coefficient predictability, significant differences are presented in terms of the separation and reattachment points predictability depending on the numerical methods. The 2-D Lam simulation can predict the lift coefficients as well as the separation and reattachment points qualitatively as similar to the 3-D LES results except for the high angle of attack which is accompanied by the massive separation. The 2-D RANS(SA), the weak nonlinearity and stall phenomena for the lift coefficients are observed. A good predictability of the separation point are shown, however, it cannot be estimated the reattachment points due to the trend to predict widely for the separation region. The predictabilities of each numerical method appear regardless of the airfoil shapes.

scholarly journals Aerodynamic study of the corrugated airfoil at ultra-low Reynolds number

2019 ◽  
Vol 11 (10) ◽  
pp. 168781401988416
Author(s):  
Mahmoud E Abd El-Latief ◽  
Khairy Elsayed ◽  
Mohamed Madbouli Abdelrahman
Keyword(s):  
Reynolds Number ◽  
Flat Plate ◽  
Flow Behavior ◽  
Low Reynolds Number ◽  
Reynolds Numbers ◽  
Aerodynamic Performance ◽  
Propulsive Efficiency ◽  
Reduced Frequency ◽  
Aeshna Cyanea ◽  
Low Reynolds

In this study, Aeshna cyanea dragonfly forewing mid-cross-section corrugated airfoil was simulated at ultra-low Reynolds number. The corrugated airfoil was compared with its smooth counterpart to study the effect of the corrugations upon the aerodynamic performance. Unsteady two-dimensional laminar flow was solved using FLUENT. This study was divided into gliding phase and flapping phase. In the gliding phase, the corrugated airfoil produced a higher lift force with respect to the profiled airfoil at both tested Reynolds numbers ([Formula: see text], [Formula: see text]) with comparable drag coefficient for all the tested angles of attack. In the flapping phase, both the corrugated airfoil and the flat-plate have a very similar flow behavior which yields a very similar aerodynamic performance at Re[Formula: see text]. A structural analysis was performed to compare the corrugated airfoil with the flat-plate. The analysis revealed the superiority of the corrugated airfoil over the flat-plate in decreasing the deflection under the applied load. The reduced frequency was varied to study its impact on the aerodynamic performance. By increasing the reduced frequency, the thrust and the lift forces increased by [Formula: see text]% and [Formula: see text]%, respectively. Any increase in the reduced frequency will increase lift and thrust forces, but the propulsive efficiency will deteriorate.

Sign in / Sign up

Export Citation Format

Share Document