scholarly journals Assessing Optimal Digital Elevation Model Selection for Active River Area Delineation Across Broad Regions

2021 ◽  
Author(s):  
Shizhou Ma ◽  
Karen Beazley ◽  
Patrick Nussey ◽  
Chris Greene
Keyword(s):  
High Resolution ◽  
Digital Elevation Model ◽  
Smoothing Algorithm ◽  
Processing Efficiency ◽  
Spatial Approach ◽  
Digital Elevation ◽  
Elevation Data ◽  
Computer Based ◽  
Lidar Dem ◽  
Elevation Model

Abstract The Active River Area (ARA) is a spatial approach for identifying the extent of functional riparian area. Given known limitations in terms of input elevation data quality and methodology, ARA studies to date have not achieved effective computer-based ARA-component delineation, limiting the efficacy of the ARA framework in terms of informing riparian conservation and management. To achieve framework refinement and determine the optimal input elevation data for future ARA studies, this study tested a novel Digital Elevation Model (DEM) smoothing algorithm and assessed ARA outputs derived from a range of DEMs for accuracy and efficiency. It was found that the tested DEM smoothing algorithm allows the ARA framework to take advantage of high-resolution LiDAR DEM and considerably improves the accuracy of high-resolution LiDAR DEM derived ARA results; smoothed LiDAR DEM in 5-meter spatial resolution best balanced ARA accuracy and data processing efficiency and is ultimately recommended for future ARA delineations across large regions.

scholarly journals HydroSHEDS v2.0 – Refined global river network and catchment delineations from TanDEM-X elevation data

2021 ◽  
Author(s):  
Bernhard Lehner ◽  
Achim Roth ◽  
Martin Huber ◽  
Mira Anand ◽  
Günther Grill ◽  
...  
Keyword(s):  
High Resolution ◽  
Digital Elevation Model ◽  
Multiple Scales ◽  
Environmental Conservation ◽  
The Arctic ◽  
River Networks ◽  
Northern Latitude ◽  
Digital Elevation ◽  
Elevation Data ◽  
Elevation Model

<p>Since its introduction in 2008, the HydroSHEDS database (www.hydrosheds.org) has transformed large-scale hydro-ecological research and applications worldwide by offering standardized spatial units for hydrological assessments. At its core, HydroSHEDS provides digital hydrographic information that can be applied in Geographic Information Software (GIS) or hydrological models to delineate river networks and catchment boundaries at multiple scales, from local to global. Its various data layers form the basis for applications in a wide range of disciplines including environmental, conservation, socioeconomic, human health, and sustainability studies.</p><p>Version 1 of HydroSHEDS was derived from the digital elevation model of the Shuttle Radar Topography Mission (SRTM) at a pixel resolution of 3 arc-seconds (~90 meters at the equator). It was created using customized processing and optimization algorithms and a high degree of manual quality control. Results are available at varying resolutions, ranging from 3 arc-seconds (~90 m) to 5 minutes (~10 km), and in nested sub-basin structures, making the data uniquely suitable for applications at multiple scales. A suite of related data collections and value-added information, foremost the HydroATLAS compilation of over 50 hydro-environmental attributes for every river reach and sub-basin, continuously enhance the versatility of the HydroSHEDS family of products. Yet version 1 of HydroSHEDS shows some important limitations. In particular, coverage above 60° northern latitude (i.e., largely the Arctic) is missing for the 3 arc-second product and is of low quality for coarser products because no SRTM elevation data are available for this region. Also, some areas are affected by inherent data gaps or other errors that could not be fully resolved at the time of creating version 1 of HydroSHEDS.</p><p>Today, the TanDEM-X dataset (TerraSAR-X add-on for Digital Elevation Measurement), created in partnership between the German Aerospace Agency (DLR) and Airbus, offers a new digital elevation model covering the entire global land surface including northern latitudes. In a collaborative project, this dataset is used to extract HydroSHEDS v2.0, following the same basic specifications as version 1. DLR is processing the original 12 m resolution TanDEM-X data to create a hydrologically pre-conditioned version at 3 arc-second resolution. In this step, corrections with high-resolution vegetation and settlement maps are applied to reduce distortions caused by vegetation cover and in built-up areas. Following this preprocessing, refined hydrological optimization and correction algorithms are used to derive the drainage pathways, including improved ‘stream-burning’ techniques that incorporate recent data products such as high-resolution terrestrial open water masks and improved tracing of drainage pathways as center lines in global lake and river maps. The resulting HydroSHEDS v2.0 database will provide river networks and catchment boundaries at full global coverage. Release of the data under a free license is scheduled for 2022, with regions above 60° northern latitude being completed first in 2021.</p>

scholarly journals Automated Conflation of Digital Elevation Model with Reference Hydrographic Lines

2020 ◽  
Vol 9 (5) ◽  
pp. 334
Author(s):  
Timofey E. Samsonov
Keyword(s):  
Spatial Analysis ◽  
Digital Elevation Model ◽  
Spatial Data ◽  
Drainage Network ◽  
Map Generalization ◽  
Data Types ◽  
Digital Elevation ◽  
Elevation Data ◽  
Elevation Model ◽  
Different Sources

Combining misaligned spatial data from different sources complicates spatial analysis and creation of maps. Conflation is a process that solves the misalignment problem through spatial adjustment or attribute transfer between similar features in two datasets. Even though a combination of digital elevation model (DEM) and vector hydrographic lines is a common practice in spatial analysis and mapping, no method for automated conflation between these spatial data types has been developed so far. The problem of DEM and hydrography misalignment arises not only in map compilation, but also during the production of generalized datasets. There is a lack of automated solutions which can ensure that the drainage network represented in the surface of generalized DEM is spatially adjusted with independently generalized vector hydrography. We propose a new method that performs the conflation of DEM with linear hydrographic data and is embeddable into DEM generalization process. Given a set of reference hydrographic lines, our method automatically recognizes the most similar paths on DEM surface called counterpart streams. The elevation data extracted from DEM is then rubbersheeted locally using the links between counterpart streams and reference lines, and the conflated DEM is reconstructed from the rubbersheeted elevation data. The algorithm developed for extraction of counterpart streams ensures that the resulting set of lines comprises the network similar to the network of ordered reference lines. We also show how our approach can be seamlessly integrated into a TIN-based structural DEM generalization process with spatial adjustment to pre-generalized hydrographic lines as additional requirement. The combination of the GEBCO_2019 DEM and the Natural Earth 10M vector dataset is used to illustrate the effectiveness of DEM conflation both in map compilation and map generalization workflows. Resulting maps are geographically correct and are aesthetically more pleasing in comparison to a straightforward combination of misaligned DEM and hydrographic lines without conflation.

scholarly journals Improved estimation of flood parameters by combining space based SAR data with very high resolution digital elevation data

2009 ◽  
Vol 13 (5) ◽  
pp. 567-576 ◽  
Author(s):  
H. Zwenzner ◽  
S. Voigt
Keyword(s):  
High Resolution ◽  
Flood Mapping ◽  
Scaling Effects ◽  
Data Set ◽  
Digital Elevation ◽  
Geometric Precision ◽  
Elevation Data ◽  
Lidar Dem ◽  
Sar Data ◽  
Very High

Abstract. Severe flood events turned out to be the most devastating catastrophes for Europe's population, economy and environment during the past decades. The total loss caused by the August 2002 flood is estimated to be 10 billion Euros for Germany alone. Due to their capability to present a synoptic view of the spatial extent of floods, remote sensing technology, and especially synthetic aperture radar (SAR) systems, have been successfully applied for flood mapping and monitoring applications. However, the quality and accuracy of the flood masks and derived flood parameters always depends on the scale and the geometric precision of the original data as well as on the classification accuracy of the derived data products. The incorporation of auxiliary information such as elevation data can help to improve the plausibility and reliability of the derived flood masks as well as higher level products. This paper presents methods to improve the matching of flood masks with very high resolution digital elevation models as derived from LiDAR measurements for example. In the following, a cross section approach is presented that allows the dynamic fitting of the position of flood mask profiles according to the underlying terrain information from the DEM. This approach is tested in two study areas, using different input data sets. The first test area is part of the Elbe River (Germany) where flood masks derived from Radarsat-1 and IKONOS during the 2002 flood are used in combination with a LiDAR DEM of 1 m spatial resolution. The other test data set is located on the River Severn (UK) and flood masks derived from the TerraSAR-X satellite and aerial photos acquired during the 2007 flood are used in combination with a LiDAR DEM of 2 m pixel spacing. By means of these two examples the performance of the matching technique and the scaling effects are analysed and discussed. Furthermore, the systematic flood mapping capability of the different imaging systems are examined. It could be shown that the combination of high resolution SAR data and LiDAR DEM allows the derivation of higher level flood parameters such as flood depth estimates, as presented for the Severn area. Finally, the potential and the constraints of the approach are evaluated and discussed.

scholarly journals DEMNAS: MODEL DIGITAL KETINGGIAN NASIONAL UNTUK APLIKASI KEPESISIRAN

OSEANA ◽  
2018 ◽  
Vol 43 (4) ◽  
Author(s):  
Marindah Yulia Iswari ◽  
Kasih Anggraini
Keyword(s):  
Remote Sensing ◽  
Digital Elevation Model ◽  
Spatial Resolution ◽  
Digital Data ◽  
Coastal Hazards ◽  
Remote Sensing Images ◽  
Geospatial Information ◽  
Digital Elevation ◽  
Elevation Data ◽  
Elevation Model

DEMNAS : NATIONAL DIGITAL ELEVATION MODEL FOR COASTAL APPLICATION. DEM is a digital data which contain information about elevation. In Indonesia, DEM can be generated from elevation points or contours in RBI (Rupabumi Indonesia). DEM can be performed to research of coastal application i.e. inundation or tsunami. DEM can help to analyze vulnerability or evacuation zone for coastal hazards. DEMNAS is one product of BIG (Geospatial Information Agency) which consist of elevation data from remote sensing images. DEMNAS data has not been widely used and is still being developed but DEMNAS has an advantage of spatial resolution. DEMNAS has spatial resolution 0.27 arc-second, which is bigger than the spatial resolution of global DEM.

scholarly journals High-Resolution LiDAR Digital Elevation Model Referenced Landslide Slide Observation with Differential Interferometric Radar, GNSS, and Underground Measurements

2021 ◽  
Vol 11 (23) ◽  
pp. 11389
Author(s):  
Kuo-Lung Wang ◽  
Jun-Tin Lin ◽  
Hsun-Kuang Chu ◽  
Chao-Wei Chen ◽  
Chia-Hao Lu ◽  
...  
Keyword(s):  
Digital Elevation Model ◽  
Solution Process ◽  
Vertical Direction ◽  
Vertical Deformation ◽  
Mountain Area ◽  
Complex Deformation ◽  
Digital Elevation ◽  
Geological Conditions ◽  
Lidar Dem ◽  
Elevation Model

The area of Taiwan is 70% hillsides. In addition, the topography fluctuates wildly, and it is active in earthquakes and young orogenic movements. Landslides are a widespread disaster in Taiwan. However, landslides are not a disaster until someone enters the mountain area for development. Therefore, landslide displacement monitoring is the primary task of this study. Potential landslide areas with mostly slate geological conditions were selected as candidate sites in this study. The slate bedding in this area is approximately 30 to 75 degrees toward the southeast, which means that creep may occur due to gravity deformation caused by high-angle rock formation strikes. In addition, because the research site is located in a densely vegetated area, the data noise is very high, and it is not easy to obtain good results. This study chose ESA Sentinel-1 data for analysis and 1-m LiDAR DEM as reference elevation. The 1-m LiDAR DEM with high accuracy can help to detect more complex deformation from DInSAR. The Sentinel-1 series of satellites have a regular revisit period. In addition, the farm areas of roads, bridges, and buildings in the study area provided enough reflections to produce good coherence. Sentinel-1 images from March 2017 to June 2021 were analyzed, obtaining slope deformation and converting it to the vertical direction. Deformation derived from SAR is compared with other measurements, including GNSS and underground slope inclinometer. The SBAS solution process provides more DInSAR pairs to overcome the problem of tremendous noise and has increased accuracy. Moreover, the SBAS method’s parameter modification derives more candidate points in the vegetated area. The vertical deformation comparison between the GNSS installation location and the ascending SBAS solution’s vertical deformation is consistent. Moreover, the reliable facing of the slope toward the SAR satellite is discussed. Due to the limitations of the GNSS stations, this study proposes a method to convert the observed deformation from the slope inclinometer and convert it to vertical deformation. The displacement of the slope indicator is originally a horizontal displacement. It is assumed that it is fixed at the farthest underground, and the bottom-to-top movement is integrated with depth. The results show that the proposed equation to convert horizontal to vertical displacement fits well in this condition. The activity of landslides within the LiDAR digital elevation model identified as scars is also mapped.

scholarly journals A 20-year record (1998–2017) of permafrost, active layer, and meteorological conditions at a High Arctic permafrost research site (Bayelva, Spitsbergen): an opportunity to validate remote sensing data and land surface, snow, and permafrost models

2017 ◽  
Author(s):  
Julia Boike ◽  
Inge Juszak ◽  
Stephan Lange ◽  
Sarah Chadburn ◽  
Eleanor Burke ◽  
...  
Keyword(s):  
Energy Balance ◽  
High Resolution ◽  
Observational Data ◽  
Digital Elevation Model ◽  
Positive Feedback ◽  
The Arctic ◽  
Data Sets ◽  
Data Set ◽  
Digital Elevation ◽  
Elevation Model

Abstract. Most permafrost is located in the Arctic, where frozen organic carbon makes it an important component of the global climate system. Despite the fact that the Arctic climate changes more rapidly than the rest of the globe, observational data density in the region is low. Permafrost thaw and carbon release to the atmosphere are a positive feedback mechanism that can exacerbate climate warming. This positive feedback functions via changing land-atmosphere energy and mass exchanges. There is thus a great need to understand links between the energy balance, which can vary rapidly over hourly to annual time scales, and permafrost, which changes slowly over long time periods. This understanding thus mandates long-term observational data sets. Such a data set is available from the Bayelva Site at Ny-Ålesund, Svalbard, where meteorology, energy balance components and subsurface observations have been made for the last 20 years. Additional data include a high resolution digital elevation model and a panchromatic image. This paper presents the data set produced so far, explains instrumentation, calibration, processing and data quality control, as well as the sources for various resulting data sets. The resulting data set is unique in the Arctic and serves a baseline for future studies. Since the data provide observations of temporally variable parameters that mitigate energy fluxes between permafrost and atmosphere, such as snow depth and soil moisture content, they are suitable for use in integrating, calibrating and testing permafrost as a component in Earth System Models. The data set also includes a high resolution digital elevation model that can be used together with the snow physical information for snow pack modeling. The presented data are available in the supplementary material for this paper and through the PANGAEA website ( https://doi.pangaea.de/10.1594/PANGAEA.880120).

Sign in / Sign up

Export Citation Format

Share Document