scholarly journals Power Systems Life Cycle Analysis Tool (Power L-CAT).

2011 ◽  
Author(s):  
Joel Andruski ◽  
Thomas E. Drennen
2021 ◽  
Author(s):  
◽  
Philip Penn

<p>This research tested the new LCAQuick Residential, a computer-based analysis tool developed by BRANZ (available from www.branz.co.nz). This tool is designed to allow the ready preparation of a LCA at an early point in the design process for a residential house. The research problem was created by the infancy of the program and its unknown ability to produce results to support decision making to include Life Cycle Analysis (LCA) for designers and developers seeking a more sustainable design outcome.  The method of testing was to take a real house design and model it using Autodesk Revit™ to create a virtual model. The virtual model was then used to input material quantities into LCAQuick Residential, which in turn generated a full set of Life-Cycle Energy (LCE) data. To test this approach, the data from a Quantity Surveyor (Schedule of Quantities) was also used as input to LCAQuick Residential, and the results compared. For this research on the energy component of LCA was examined – the LCE.  It was found that the material quantities generated by each of the approaches differed, and it was necessary to critically compare them to ensure material volumes, density and quantity were appropriately matched and entered into the tool. Considerable care was also required to ensure materials were correctly identified and allocated to the appropriate LCAQuick library material.</p>


2012 ◽  
Author(s):  
J.L. Sullivan ◽  
C.E. Clark ◽  
L. Yuan ◽  
J. Han ◽  
M. Wang

2021 ◽  
Author(s):  
◽  
Philip Penn

<p>This research tested the new LCAQuick Residential, a computer-based analysis tool developed by BRANZ (available from www.branz.co.nz). This tool is designed to allow the ready preparation of a LCA at an early point in the design process for a residential house. The research problem was created by the infancy of the program and its unknown ability to produce results to support decision making to include Life Cycle Analysis (LCA) for designers and developers seeking a more sustainable design outcome.  The method of testing was to take a real house design and model it using Autodesk Revit™ to create a virtual model. The virtual model was then used to input material quantities into LCAQuick Residential, which in turn generated a full set of Life-Cycle Energy (LCE) data. To test this approach, the data from a Quantity Surveyor (Schedule of Quantities) was also used as input to LCAQuick Residential, and the results compared. For this research on the energy component of LCA was examined – the LCE.  It was found that the material quantities generated by each of the approaches differed, and it was necessary to critically compare them to ensure material volumes, density and quantity were appropriately matched and entered into the tool. Considerable care was also required to ensure materials were correctly identified and allocated to the appropriate LCAQuick library material.</p>


2010 ◽  
Author(s):  
J. L. Sullivan ◽  
C. E. Clark ◽  
J. Han ◽  
M. Wang

Author(s):  
Ahmed I. Osman ◽  
Neha Mehta ◽  
Ahmed M. Elgarahy ◽  
Mahmoud Hefny ◽  
Amer Al-Hinai ◽  
...  

AbstractDihydrogen (H2), commonly named ‘hydrogen’, is increasingly recognised as a clean and reliable energy vector for decarbonisation and defossilisation by various sectors. The global hydrogen demand is projected to increase from 70 million tonnes in 2019 to 120 million tonnes by 2024. Hydrogen development should also meet the seventh goal of ‘affordable and clean energy’ of the United Nations. Here we review hydrogen production and life cycle analysis, hydrogen geological storage and hydrogen utilisation. Hydrogen is produced by water electrolysis, steam methane reforming, methane pyrolysis and coal gasification. We compare the environmental impact of hydrogen production routes by life cycle analysis. Hydrogen is used in power systems, transportation, hydrocarbon and ammonia production, and metallugical industries. Overall, combining electrolysis-generated hydrogen with hydrogen storage in underground porous media such as geological reservoirs and salt caverns is well suited for shifting excess off-peak energy to meet dispatchable on-peak demand.


2008 ◽  
Vol 4 (4) ◽  
pp. 318-323 ◽  
Author(s):  
Hirotsugu KAMAHARA ◽  
Shun YAMAGUCHI ◽  
Ryuichi TACHIBANA ◽  
Naohiro GOTO ◽  
Koichi FUJIE

2019 ◽  
Vol 28 (1) ◽  
pp. 131-158
Author(s):  
Hanbyeol Yoo ◽  
T.J. Lah

Sign in / Sign up

Export Citation Format

Share Document