Enhancement of the Conventional Wind Turbine Performance using Multi-Rotor Configuration

2022 ◽  
Author(s):  
Malhar Prajapati ◽  
Dhwanil Shukla
Keyword(s):  
Wind Turbine ◽  
Turbine Performance

scholarly journals Performance assessment and optimization of a helical Savonius wind turbine by modifying the Bach’s section

2021 ◽  
Vol 3 (8) ◽  
Author(s):  
M. Niyat Zadeh ◽  
M. Pourfallah ◽  
S. Safari Sabet ◽  
M. Gholinia ◽  
S. Mouloodi ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Performance Assessment ◽  
Turbulent Flows ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Basic Model ◽  
Turbine Performance ◽  
Primary Model ◽  
Savonius Wind Turbine

AbstractIn this paper, we attempted to measure the effect of Bach’s section, which presents a high-power coefficient in the standard Savonius model, on the performance of the helical Savonius wind turbine, by observing the parameters affecting turbine performance. Assessment methods based on the tip speed ratio, torque variation, flow field characterizations, and the power coefficient are performed. The present issue was stimulated using the turbulence model SST (k- ω) at 6, 8, and 10 m/s wind flow velocities via COMSOL software. Numerical simulation was validated employing previous articles. Outputs demonstrate that Bach-primary and Bach-developed wind turbine models have less flow separation at the spoke-end than the simple helical Savonius model, ultimately improving wind turbines’ total performance and reducing spoke-dynamic loads. Compared with the basic model, the Bach-developed model shows an 18.3% performance improvement in the maximum power coefficient. Bach’s primary model also offers a 12.4% increase in power production than the initial model’s best performance. Furthermore, the results indicate that changing the geometric parameters of the Bach model at high velocities (in turbulent flows) does not significantly affect improving performance.

scholarly journals Design Oriented Aerodynamic Modelling of Wind Turbine Performance

2007 ◽  
Vol 75 ◽  
pp. 012011 ◽  
Author(s):  
Luca Greco ◽  
Claudio Testa ◽  
Francesco Salvatore
Keyword(s):  
Wind Turbine ◽  
Turbine Performance ◽  
Aerodynamic Modelling

Long Term Wind Turbine Performance Analysis Through SCADA Data: A Case Study

2021 ◽  
Author(s):  
Davide Astolfi ◽  
Gabriele Malgaroli ◽  
Filippo Spertino ◽  
Angela Amato ◽  
Andrea Lombardi ◽  
...  
Keyword(s):  
Performance Analysis ◽  
Wind Turbine ◽  
Turbine Performance

scholarly journals Review of Icing Effects on Wind Turbine in Cold Regions

2018 ◽  
Vol 72 ◽  
pp. 01007 ◽  
Author(s):  
Faizan Afzal ◽  
Muhammad S. Virk
Keyword(s):  
Wind Turbine ◽  
Structural Integrity ◽  
Turbine Blades ◽  
Leading Edge ◽  
Added Mass ◽  
Cold Climate ◽  
Ice Accretion ◽  
Wind Turbine Blades ◽  
Turbine Performance ◽  
Ice Shedding

This paper describes a brief overview of main issues related to atmospheric ice accretion on wind turbines installed in cold climate region. Icing has significant effects on wind turbine performance particularly from aerodynamic and structural integrity perspective, as ice accumulates mainly on the leading edge of the blades that change its aerodynamic profile shape and effects its structural dynamics due to added mass effects of ice. This research aims to provide an overview and develop further understanding of the effects of atmospheric ice accretion on wind turbine blades. One of the operational challenges of the wind turbine blade operation in icing condition is also to overcome the process of ice shedding, which may happen due to vibrations or bending of the blades. Ice shedding is dangerous phenomenon, hazardous for equipment and personnel in the immediate area.

Aerodynamic Analysis of an Airfoil With Leading Edge Pitting Erosion

2017 ◽  
Vol 139 (6) ◽  
Author(s):  
Yan Wang ◽  
Ruifeng Hu ◽  
Xiaojing Zheng
Keyword(s):  
Wind Turbine ◽  
Indirect Effects ◽  
Leading Edge ◽  
Aerodynamic Performance ◽  
Navier Stokes ◽  
Distribution Area ◽  
Navier Stokes Equation ◽  
Turbine Performance ◽  
Wind Turbine Airfoil ◽  
Cfd Method

Leading edge erosion is a considerable threat to wind turbine performance and blade maintenance, and it is very imperative to accurately predict the influence of various degrees of erosion on wind turbine performance. In the present study, an attempt to investigate the effects of leading edge erosion on the aerodynamics of wind turbine airfoil is undertaken by using computational fluid dynamics (CFD) method. A new pitting erosion model is proposed and semicircle cavities were used to represent the erosion pits in the simulation. Two-dimensional incompressible Reynolds-averaged Navier–Stokes equation and shear stress transport (SST) k–ω turbulence model are adopted to compute the aerodynamics of a S809 airfoil with leading edge pitting erosions, where the influences of pits depth, densities, distribution area, and locations are considered. The results indicate that pitting erosion has remarkably undesirable influences on the aerodynamic performance of the airfoil, and the critical pits depth, density, and distribution area degrade the airfoil aerodynamic performance mostly were obtained. In addition, the dominant parameters are determined by the correlation coefficient path analysis method, results showed that all parameters have non-negligible effects on the aerodynamics of S809 airfoil, and the Reynolds number is of the most important, followed by pits density, pits depth, and pits distribution area. Meanwhile, the direct and indirect effects of these factors are analyzed, and it is found that the indirect effects are very small and the parameters can be considered to be independent with each other.

Sign in / Sign up

Export Citation Format

Share Document