Oil to Source Rock Correlation Using Biomarker Data Through Pattern Matching and Fingerprinting Analysis in “Kitkat” Field, Jabung Block, South Sumatra Basin

Author(s):  
S., R. Muthasyabiha

Geochemical analysis is necessary to enable the optimization of hydrocarbon exploration. In this research, it is used to determine the oil characteristics and the type of source rock candidates that produces hydrocarbon in the “KITKAT” Field and also to understand the quality, quantity and maturity of proven source rocks. The evaluation of source rock was obtained from Rock-Eval Pyrolysis (REP) to determine the hydrocarbon type and analysis of the value of Total Organic Carbon (TOC) was performed to know the quantity of its organic content. Analysis of Tmax value and Vitrinite Reflectance (Ro) was also performed to know the maturity level of the source rock samples. Then the oil characteristics such as the depositional environment of source rock candidate and where the oil sample develops were obtained from pattern matching and fingerprinting analysis of Biomarker data GC/GCMS. Moreover, these data are used to know the correlation of oil to source rock. The result of source rock evaluation shows that the Talangakar Formation (TAF) has all these parameters as a source rock. Organic material from Upper Talangakar Formation (UTAF) comes from kerogen type II/III that is capable of producing oil and gas (Espitalie, 1985) and Lower Talangakar Formation (LTAF) comes from kerogen type III that is capable of producing gas. All intervals of TAF have a quantity value from very good–excellent considerable from the amount of TOC > 1% (Peters and Cassa, 1994). Source rock maturity level (Ro > 0.6) in UTAF is mature–late mature and LTAF is late mature–over mature (Peters and Cassa, 1994). Source rock from UTAF has deposited in the transition environment, and source rock from LTAF has deposited in the terrestrial environment. The correlation of oil to source rock shows that oil sample is positively correlated with the UTAF.

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7088
Author(s):  
Qianru Wang ◽  
Haiping Huang ◽  
Chuan He ◽  
Zongxing Li

Shale oil and source rock samples of the Carboniferous Keluke Formation from well Chaiye 2 in the Delingha Depression were analyzed by gas chromatography–mass spectrometry. Source rocks were highly mature at the gas generation stage with vitrinite reflectance (Ro) of 1.45–1.88%. However, the oil produced from the shale reservoir was characterized by abundant biomarkers but low abundance of diamondoid hydrocarbons with estimated Ro of ca. 0.78%, indicating hydrocarbons were still at a relatively low thermal maturity level. As the crude oil was generated and accumulated autochthonously, preliminary results indicate that crude oil and source rocks witnessed differential thermal evolution and significant disparity of the current thermal maturity in the shale reservoir due to rapid tectonic subsidence and clay mineral catalysts that accelerated the thermal maturation process. Although tectonic uplifts occurred afterwards, the vitrinite recorded the highest maturity that source rocks have ever reached, whereas the oil has not reached the same maturity level due to less impact from thermal alteration or mineral catalysis than source rocks in the shale reservoir. Such a discovery enlarges the hydrocarbon perseveration of maturity ranges in reservoirs, particularly for the unconventional tight formation, and benefits potential hydrocarbon exploration from highly mature sediments.


2020 ◽  
Vol 10 (8) ◽  
pp. 3207-3225
Author(s):  
Mohamed Ragab Shalaby ◽  
Muhammad Izzat Izzuddin bin Haji Irwan ◽  
Liyana Nadiah Osli ◽  
Md Aminul Islam

Abstract This research aims to conduct source rock characterization on the Narimba Formation in the Bass Basin, Australia, which is made of mostly sandstone, shale and coal. The geochemical characteristics and depositional environments have been investigated through a variety of data such as rock–eval pyrolysis, TOC, organic petrography and biomarkers. Total organic carbon (TOC) values indicated good to excellent organic richness with values ranging from 1.1 to 79.2%. Kerogen typing of the examined samples from the Narimba Formation indicates that the formation contains organic matter capable of generating kerogen Type-III, Type-II-III and Type-II which is gas prone, oil–gas prone and oil prone, respectively. Pyrolysis maturity parameters (Tmax, PI), in combination with vitrinite reflectance and some biomarkers, all confirm that all samples are at early mature to mature and are in the oil and wet gas windows. The biomarkers data (the isoprenoids (Pr/Ph), CPI, isoprenoids/n-alkanes distribution (Pr/nC17 and Ph/nC18), in addition to the regular sterane biomarkers (C27, C28 and C29) are mainly used to evaluate the paleodepositional environment, maturity and biodegradation. It has been interpreted that the Narimba Formation was found to be deposited in non-marine (oxygen-rich) depositional environment with a dominance of terrestrial plant sources. All the analyzed samples show clear indication to be considered at the early mature to mature oil window with some indication of biodegradation.


Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Chunfang Cai ◽  
Chenlu Xu ◽  
Wenxiang He ◽  
Chunming Zhang ◽  
Hongxia Li

The potential parent source rocks except from Upper Permian Dalong Formation (P3d) for Upper Permian and Lower Triassic solid bitumen show high maturity to overmaturity with equivalent vitrinite reflectance (ERo) from 1.7% to 3.1% but have extractable organic matter likely not contaminated by younger source rocks. P3d source rocks were deposited under euxinic environments as indicated by the pyrite δ34S values as light as -34.5‰ and distribution of aryl isoprenoids, which were also detected from the Lower Silurian (S1l) source rock and the solid bitumen in the gas fields in the west not in the east. All the solid bitumen not altered by thermochemical sulfate reduction (TSR) has δ13C and δ34S values similar to part of the P3l kerogens and within the S1l kerogens. Thus, the eastern solid bitumen may have been derived from the P3l kerogens, and the western solid bitumen was likely to have precracking oils from P3l kerogens mixed with the S1l or P3d kerogens. This case-study tentatively shows that δ13C and δ34S values along with biomarkers have the potential to be used for the purpose of solid bitumen and source rock correlation in a rapidly buried basin, although further work should be done to confirm it.


2020 ◽  
Vol 10 (8) ◽  
pp. 3191-3206
Author(s):  
Olusola J. Ojo ◽  
Ayoola Y. Jimoh ◽  
Juliet C. Umelo ◽  
Samuel O. Akande

Abstract The Patti Formation which consists of sandstone and shale offers the best potential source beds in the Bida Basin. This inland basin is one of the basins currently being tested for hydrocarbon prospectivity in Nigeria. Fresh samples of shale from Agbaja borehole, Ahoko quarry and Geheku road cut were analysed using organic geochemical and palynological techniques to unravel their age, paleoecology, palynofacies and source bed hydrocarbon potential. Palynological data suggest Maastrichtian age for the sediments based on the abundance of microfloral assemblage; Retidiporites magdalenensis, Echitriporites trianguliformis and Buttinia andreevi. Dinocysts belonging to the Spiniferites, Deflandrea and Dinogymnium genera from some of the analysed intervals are indicative of freshwater swamp and normal sea conditions. Palynological evidence further suggests mangrove paleovegetation and humid climate. Relatively high total organic carbon TOC (0.77–8.95 wt%) was obtained for the shales which implies substantial concentration of organic matter in the source beds. Hydrocarbon source rock potential ranges from 0.19 to 0.70 mgHC/g.rock except for a certain source rock interval in the Agbaja borehole with high yield of 25.18 mgHC/g.rock. This interval also presents exceptionally high HI of 274 mgHC/g.TOC and moderate amount of amorphous organic matter. The data suggests that in spite of the favourable organic matter quantity, the thermal maturity is low as indicated by vitrinite reflectance and Tmax (0.46 to 0.48 Ro% and 413 to 475 °C, respectively). The hydrocarbon extracts show abundance of odd number alkanes C27–C33, low sterane/hopane ratio and Pr/Ph > 2. We conclude that the source rocks were terrestrially derived under oxic condition and dominated by type III kerogen. Type II organic matter with oil and gas potential is a possibility in Agbaja area of Bida Basin. Thermal maturity is low and little, or no hydrocarbon has been generated from the source rocks.


Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 650 ◽  
Author(s):  
Jinliang Zhang ◽  
Jiaqi Guo ◽  
Jinshui Liu ◽  
Wenlong Shen ◽  
Na Li ◽  
...  

The Lishui Sag is located in the southeastern part of the Taibei Depression, in the East China Sea basin, where the sag is the major hydrocarbon accumulation zone. A three dimensional modelling approach was used to estimate the mass of petroleum generation and accumulated during the evolution of the basin. Calibration of the model, based on measured maturity (vitrinite reflectance) and borehole temperatures, took into consideration two main periods of erosion events: a late Cretaceous to early Paleocene event, and an Oligocene erosion event. The maturation histories of the main source rock formations were reconstructed and show that the peak maturities have been reached in the west central part of the basin. Our study included source rock analysis, measurement of fluid inclusion homogenization temperatures, and basin history modelling to define the source rock properties, the thermal evolution and hydrocarbon generation history, and possible hydrocarbon accumulation processes in the Lishui Sag. The study found that the main hydrocarbon source for the Lishui Sag are argillaceous source rocks in the Yueguifeng Formation. The hydrocarbon generation period lasted from 58 Ma to 32 Ma. The first period of hydrocarbon accumulation lasted from 51.8 Ma to 32 Ma, and the second period lasted from 23 Ma to the present. The accumulation zones mainly located in the structural high and lithologic-fault screened reservoir filling with the hydrocarbon migrated from the deep sag in the south west direction.


Author(s):  
M. Aditya

The purpose of this study was to evaluate the hydrocarbon source potential of the Middle Miocene Lower Baong Formation of the Lhokseumawe area and further attempt to establish a correlation of this possible source with the oil produced in the area by the mean of biomarkers analysis. Source rock characterization was realized by integrating several geochemical measurements including TOC, HI and Ro from the DY-1 and TM-1 wells. This has allowed us to define the organic content, maturity and kerogen type of the Lower Baong. Meanwhile, multiple produced oil samples from the area of interest were used to characterize their geochemical signature, based on a combination of isoprenoid, triterpane and sterane biomarkers, in an effort to determine maturity of those oils and the depositional environment of their source. This provides the basis of our attempt to correlate genetically oil and source rock in the Lhokseumawe area. The geochemical characterization of the Lower Baong suggest the formation to be an effective active source rock in the Lhokseumawe area with remaining average TOC of c1.5%, Kerogen Type II-III and maturity levels optimal for oil expulsion. Biomarker analysis of oils suggest an origin from a source facies deposited in open marine environment. Maturity level analysis using pentacyclic triterpane supports the source to be at peak maturity level. The correlation of oil with source rock supports largely that the Lower Baong oils are sourced by Lower Baong source facies of marine origin. However it worth noting that one oil family differs from this genetic correlation, opening speculation around other source facies to be active in the Lower Baong or an additional source interval to be active in the Lhokseumawe area. This could be interesting topic to be discuss in future.


2021 ◽  
pp. 1-31
Author(s):  
Zhenglu Xiao ◽  
Shijia Chen ◽  
Xiangdong Yin ◽  
Pan Wang ◽  
Jiang Zhu ◽  
...  

There are three sets of potential source rocks in the Yanchang Formation in the east part of the Shanbei Slope in the Ordos Basin. Based on the experimental results of total organic carbon, vitrinite reflectance, rock organic matter extraction, and saturated hydrocarbon chromatography (GC-MS), we have analyzed the geochemical and biomarker characteristics of the Chang 7, Chang 8, and Chang 9 source rocks, and the Chang 8 reservoir extracts and find that the Chang 7, Chang 8, and Chang 9 source rocks were deposited in the sedimentary environment of weak oxidation and weak reduction. Higher plants contribute more in the parent materials of the Chang 7 and Chang 9 source rocks, whereas lower aquatic organisms contribute more to the Chang 8 source rock. However, the source of the Chang 8 crude oil in the east part of Shanbei Slope does not match the chemical fingerprint of the Chang 8 source rock. To address this problem, we examined samples taken from the Zhidan oilfield, where our results show that the Chang 7, Chang 8, and Chang 9 source rocks all have hydrocarbon-supplying capacity. The relative abundance of regular steranes (C27, C28, C29) and hopane (17α(H), 21β(H)-hopane, 17β(H)-rearranged hopane, 18α(H)-22,29,30-trinorhopane) provides a means to assign the crude oil components to a given. Further analysis of the biomarkers of the three source rocks and those of the Chang 8 crude oil indicate that crude oil in the Chang 8 reservoir was not generated in situ; rather, it was supplied by the underlying Chang 9 source rock.


2020 ◽  
Vol 4 (1) ◽  
pp. 1-13
Author(s):  
Aboglila S

Drill cutting samples (n = 92) from the Devonian Awaynat Wanin Formation and Silurian Tanezzuft Formation, sampled from three wells F1, G1 and H1, locate in the northern edge of the Murzuq basin (approximately 700 kilometers south of Tripoli). The studied samples were analyzed in the objective of their organic geochemical assessment such as the type of organic matter, depositional conditions and thermal maturity level. A bulk geochemical parameters and precise biomarkers were estimated, using chromatography-mass spectrometry (GC-MS) to reveal a diversity of their geochemical characterizations. The rock formations are having varied organic matter contents, ranged from fair to excellent. The total organic carbon (TOC) reached about 9.1 wt%, ranging from 0.6 to 2.93 wt% (Awaynat Wanin), 0.5 to 2.54 wt% (Tanezzuft) and 0.52 to 9.1 wt% (Hot Shale). The cutting samples are ranged oil-prone organic matter (OM) of hydrogen index (HI) ranged between 98 –396 mg HC/g TOC, related kerogen types are type II and II/III, with oxygen index (OI): 6 - 190 with one sample have value of 366 mg CO2/g. Thermal maturity of these source rocks is different, ranging from immature to mature and oil window in the most of Tanezzuft Formation and Hot Shale samples, as reflected from the production index data (PI: 0.08 - 034). Tmax and vitrinite reflectance Ro% data (Tmax: 435 – 454 & Ro%: 0.46 - 1.38) for the Awaynat Wanin. Biomarker ratios of specific hydrocarbons extracted from represented samples (n = 9), were moreover used to study thermal maturity level and depositional environments. Pristine/Phytane (Pr/Ph) ratios of 1.65 - 2.23 indicated anoxic to suboxic conditions of depositional marine shale and lacustrine source rock.


2016 ◽  
Author(s):  
Samuel Salufu ◽  
Rita Onolemhemhen ◽  
Sunday Isehunwa

ABSTRACT This paper sought to use information from outcrop sections to characterize the source and reservoir rocks in a basin in order to give indication(s) for hydrocarbon generation potential in a basin in minimizing uncertainty and risk that are allied with exploration and field development of oil and gas, using subsurface data from well logs, well sections, seismic and core. The methods of study includes detailed geological, stratigraphical, geochemical, structural,, petro-graphical, and sedimentological studies of rock units from outcrop sections within two basins; Anambra Basin and Abakaliki Basin were used as case studies. Thirty eight samples of shale were collected from these Basins; geochemical analysis (rockeval) was performed on the samples to determine the total organic content (TOC) and to assess the oil generating window. The results were analyzed using Rock wares, Origin, and Surfer software in order to properly characterize the potential source rock(s) and reservoir rock(s) in the basins, and factor(s) that can favour hydrocarbon traps. The results of the geological, stratigraphical, sedimentological, geochemical, and structural, were used to developed a new model for hydrocarbon generation in the Basins. The result of the geochemical analysis of shale samples from the Anambra Basin shows that the TOC values are ≥ 1wt%, Tmax ≥ 431°C, Vitrinite reflectance values are ≥ 0.6%, and S1+S2 values are > 2.5mg/g for Mamu Formation while shale samples from other formations within Anambra Basin fall out of these ranges. The shale unit in the Mamu Formation is the major source rock for oil generation in the Anambra Basin while others have potential for gas generation with very little oil generation. The shale samples from Abakaliki Basin shows that S1+S2 values range from< 1 – 20mg/g, TOC values range from 0.31-4.55wt%, vitrinite reflectance ranges from 0.41-1.24% and Tmax ranges from423°C – 466°C. This result also shows that there is no source rock for oil generation in Abakaliki Basin; it is either gas or graphite. This observation indicates that all the source rocks within Abakaliki Basin have exceeded petroleum generating stage due to high geothermal heat resulting from deep depth or the shale units have not attained catagenesis stage as a result of S1+S2 values lesser than 2.5mg/g despite TOC values of ≥ 0.5wt% and vitrinite reflectance values of ≥ 0.6%. The novelty of this study is that the study has been able to show that here there is much more oil than the previous authors claimed, and the distribution of this oil and gas in the basins is controlled by two major factors; the pattern of distribution of the materials of the source rock prior to subsidence and during the subsidence period in the basin, and the pattern and the rate of tectonic activities, and heat flow in the basin. If these factors are known, it would help to reduce the uncertainties associated with exploration for oil and gas in the two basins.


Sign in / Sign up

Export Citation Format

Share Document