scholarly journals Groundwater quality evaluation for irrigation application in Mandsaur region, Madhya Pradesh, India

2006 ◽  
Vol 34 ◽  
pp. 159-164
Author(s):  
Vinita Kulshreshtha ◽  
Pramendra Dev
Keyword(s):  
Electrical Conductivity ◽  
Sodium Adsorption Ratio ◽  
Madhya Pradesh ◽  
Total Hardness ◽  
Irrigation Application ◽  
Low Sodium ◽  
Wilcox Diagram ◽  
Groundwater Samples ◽  
Dug Wells

The chemical analysis of 22 water samples collected from representative open dug-wells existing in the Mandsaur area of Madhya Pradesh, India, was carried out for evaluating the quality of irrigation water. For this purpose, its colour, odour, taste, pH, total hardness, electrical conductivity, ionic concentrations, and various other parameters were determined. The calculated values of per cent sodium, Kelley's ratio, sodium adsorption ratio, residual sodium carbonate and magnesium hazard indicate that except at a few places, the groundwater, in general, is suitable for irrigation. The sodium adsorption ratio and electrical conductivity values were plotted on the U.S. Salinity Diagram. The plots of these parameters indicate that 8 samples fall in CS type (Medium Salinity and Low Sodium hazards), and 14 samples belong to C type (High Salinity and Low Sodium hazards). In general, the groundwater is favourable for irrigation use. The values of electrical conductivity and sodium percentage determined in respect of groundwater samples of Mandsaur were also plotted on the Wilcox Diagram. Based on this diagram, 4 samples represent Excellent to Good categories, whereas 18 samples indicate Good to Permissible categories. Based on this classification the groundwater of Mandsaur area, in general, is suitable for irrigation application.

scholarly journals Assessment of Groundwater Quality for Irrigation on the Bank of Noyyal River at Tiruppur, Tamil Nadu, India

2015 ◽  
Vol 57 ◽  
pp. 1-6 ◽  
Author(s):  
A. Zahir Hussain ◽  
K.M. Mohamed Sheriff
Keyword(s):  
Electrical Conductivity ◽  
Groundwater Quality ◽  
Physicochemical Parameters ◽  
Tamil Nadu ◽  
Sodium Adsorption Ratio ◽  
Total Hardness ◽  
Residual Sodium Carbonate ◽  
Permeability Index ◽  
Groundwater Samples ◽  
Kelly’S Ratio

Tiruppur is a textile city located on the banks of Noyyal River a tributary of the River Cauvery. Twenty groundwater samples were collected in identical locations from bore wells. The concentrations of physicochemical parameters of pH, Electrical Conductivity (EC), Total Hardness (TH), Ca, Mg, Na, K, HCO3, SO4, Cl and NO3 were analyzed. The results of the concentrations were interpreted and measured with different irrigation indexes like Percent Sodium (%Na), Sodium Adsorption Ratio (SAR), Residual Sodium Carbonate (RSC), Permeability Index (PI), Kelly’s Ratio (KR), CAI-1 and CAI-2 were analyzed.

scholarly journals Suitability of Groundwater Quality for Irrigational use between Silkanth and Kundgaon, North of River Narmada in the Upper Alluvial Plains of Narmada Valley, District Sehore and Dewas, M.P., India

2017 ◽  
Vol 2 (2) ◽  
pp. 121-128
Author(s):  
V.K. Parasha ◽  
Sunil Kumar Sharma
Keyword(s):  
Water Quality ◽  
Sodium Adsorption Ratio ◽  
Agricultural Water ◽  
Distributed Resources ◽  
Low Sodium ◽  
Groundwater Samples ◽  
Kelly’S Ratio ◽  
River Narmada

Groundwater is one of the earth’s most widely distributed resources and is consistently catering to the requirement of the agricultural irrigation. In the present study, an attempt has been made to understand the hydrochemistry and its agricultural water quality of groundwater between Silkhanth and Kundgaon, North of river Narmada, Madhya Pradesh. During the course of water quality studies of the area, 17 groundwater samples were collected and chemically analysed. Results obtained from water chemistry were used in the determination of different irrigational specifications to appraise the agricultural quality of groundwater. Important specifications like Sodium Adsorption Ratio (SAR) Residual Sodium Carbonate (RSC), Soluble Sodium Percentage (SSP) and Kelly’s Ratio (KR) are used for decisive the appropriateness of groundwater for the agricultural purposes. Result shows that the majority of groundwater belongs to Medium to - High Saline and Low sodium water. As per the magnesium ratio classification, the groundwaters of the study area has no magnesium hazards. Kelly’s ratio shows that majority of groundwater belongs to suitable class. As per the classification based on RSC the groundwater belongs to Safe class. As per the guidelines of Ayers and Westcot, majority of water have slight to moderate toxicity with respect to Nitrate and their use is restricted for semitolerant crops.

scholarly journals Assessment of Quality of Groundwater in Kandarvakottai and Karambakudi Areas of Pudukkottai District, Tamilnadu, India

2009 ◽  
Vol 6 (3) ◽  
pp. 898-904
Author(s):  
D. Ilangeswaran ◽  
R. Kumar ◽  
D. Kannan
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Physicochemical Parameters ◽  
Quality Standards ◽  
Physicochemical Characteristics ◽  
Total Dissolved Solids ◽  
Water Quality Standards ◽  
Standard Procedures ◽  
Groundwater Samples

Various samples of groundwater were collected from different areas of Kandarvakottai and Karambakudi of Pudukkottai District, Tamilnadu and analyzed for their physicochemical characteristics. The results of this analysis were compared with the water quality standards of ISI, WHO and CPHEEO. In this analysis the various physicochemical parameters such as pH, electrical conductivity, turbidity, total dissolved solids, Cl-, F-, SO42-, PO43-, NO3-, NO2-, CN-, Nas+, K+, NH3, Mn, Fe, Ca & Mg hardnessetc., were determined using standard procedures. The quality of groundwater samples were discussed with respect to these parameters and thus an attempt were made to ascertain the quality of groundwater used for drinking and cooking purposes in and around Kandarvakottai and Karambakudi areas.

scholarly journals An Assessment of the Quality of Groundwater in a Textile Dyeing Industrial Area in Erode City, Tamilnadu, India

2010 ◽  
Vol 7 (3) ◽  
pp. 1033-1039 ◽  
Author(s):  
P. N. Palanisamy ◽  
S. K. Kavitha
Keyword(s):  
Physicochemical Parameters ◽  
Industrial Area ◽  
Total Hardness ◽  
Systematic Analysis ◽  
Adverse Impacts ◽  
Groundwater Samples ◽  
Textile Dyeing ◽  
Calcium Magnesium ◽  
Standard Values

Groundwater samples were collected in Erode city, Tamilnadu, from an area having large number of textile dyeing units. Though people residing in this area use river water supplied by local bodies as their major source for drinking, groundwater is also used as complementary source. The samples collected were subjected to systematic analysis using the standard methods and procedures. The values obtained for different physicochemical parameters were compared with the standard values given by ISI/ WHO. Variations in many physicochemical parameters were observed for most of the samples when compared to the standard values. More than half of the samples collected had their EC, TDS, total hardness, calcium, magnesium, sulphate and chloride exceeding their acceptable limits. This attempt has been made to determine the quality of groundwater in the study area confirms the deterioration of groundwater quality in the area and calls for some effective measures to be taken urgently to minimize the adverse impacts that may occur due to the contamination of groundwater.

scholarly journals A Study of Groundwater Characteristics by Using of Groundwater Quality Index and Pollution Index in Zubair District, Basra Province, Iraq

2018 ◽  
Vol 8 (1) ◽  
pp. 19-26
Author(s):  
Ammar S. Dawood ◽  
Mushtak T. Jabbar ◽  
Mudhar H. Gatea ◽  
Hayfaa J. Al-Tameemi
Keyword(s):  
Electrical Conductivity ◽  
Groundwater Quality ◽  
Quality Index ◽  
Calcium Nitrate ◽  
Pollution Index ◽  
Total Dissolved Solids ◽  
Total Hardness ◽  
Dissolved Solids ◽  
Groundwater Quality Index ◽  
Groundwater Samples

Abstract The present work evaluated the groundwater quality index (GWQI) depending on some physicochemical analyses of thirteen groundwater samples in the Zubair district in Basra Province, Iraq. The collected groundwater samples were subjected to an extensive physicochemical analysis to evaluate the characteristics of water for drinking purpose according to Iraqi standard. For calculating the (GWQI), twelve water quality parameters were considered; turbidity, pH, chloride, total dissolved solids, total hardness (TH), electrical conductivity (EC), sodium, sulphate, phosphate, calcium, nitrate, and magnesium. The analysis of the results reveals that all the samples surpassed the portability of drinking water limits. High values of the (GWQI) in the obtained groundwater samples could possibly be caused by the higher values of electrical conductivity, total hardness, chloride, total dissolved solids and sodium within the groundwater. The calculated GWQI values ranged from 73.36 to 595.92. The pollution index (PI) was calculated for the study area with values ranged from 2.97 to 8.26. Correlation coefficients amongst the chosen water parameters exhibited some strong relationships. Finally, the analysis shows that the groundwater in this particular area needs to be treated before its consumption, and in addition, it usually needs to avoid the hazard of contamination. Principal component analysis (PCA) and cluster analysis (CA) indicate that the acquiring-data from groundwater samples are explained 90.5 % of the variance in the data with a four-component system that explains a large portion of the total variance of collected data.

scholarly journals Assessment of irrigation water quality of Bogra District in Bangladesh

1970 ◽  
Vol 34 (4) ◽  
pp. 507-608 ◽  
Author(s):  
MS Islam ◽  
SZKM Shamsad
Keyword(s):  
Water Quality ◽  
Irrigation Water ◽  
Total Dissolved Solids ◽  
Sodium Adsorption Ratio ◽  
Total Hardness ◽  
Irrigation Water Quality ◽  
Chemical Parameters ◽  
Kelly’S Ratio ◽  
Surface And Groundwater

Some important physio-chemical parameters of surface and groundwater of Bogra District were evaluated for the criteria of irrigation water quality. Forty four water samples were collected in the peak dry season (December-April) from different areas of Bogra District. The study revealed that temperature, pH, electrical conductivity (EC), total dissolved solids (TDS), sodium adsorption ratio (SAR), soluble sodium percentage (SSP), residual sodium carbonate (RSC), total hardness (Ht) and Kelly’s ratio of waters were found within the permissible limits for irrigation purposes. Any initiative for surface and groundwater development for planned irrigation practices is highly encouraged. Key Words: Irrigation water (surface and groundwater); quality; Bogra District. DOI: 10.3329/bjar.v34i4.5836Bangladesh J. Agril. Res. 34(4) : 597-608, December 2009

Evaluation of Groundwater Quality for Domestic and Irrigation Suitability from Upper Bhima Basin, Western India: A Hydro-geochemical Perspective

2019 ◽  
Vol 2 (2) ◽  
pp. 113-123 ◽  
Author(s):  
Himanshu Gaikwad ◽  
Huzefa Shaikh ◽  
Bhavana Umrikar
Keyword(s):  
Anthropogenic Activities ◽  
Groundwater Resources ◽  
Total Hardness ◽  
Nitrate Content ◽  
Western India ◽  
High Concentration ◽  
Major Cations ◽  
Groundwater Samples ◽  
Dug Wells ◽  
Basaltic Aquifer

Major ion constituents present in groundwater are studied for shallow unconfined basaltic aquifer in order to understand the quality of groundwater resources and its impacts on inhabitants and irrigation. 30 groundwater samples collected from dug wells located in upper Bhima basin were analyzed to measure major cations and anions for establishing water quality index (WQI) and irrigation indices. The concentration of pH, electrical conductivity, total hardness, total dissolved solids and major cations and anions were analyzed. Groundwater types were detected using Piper’s trilinear diagram as Ca2+-HCO3−, Ca2+-Na+-HCO3−, mixed Ca2+-Mg2+-Cl− and Ca2+-Cl− groups. High concentration (8 to 194 mg/L) of nitrate was found at some locations in the region. WQI shows 66% of the samples to be unfit for drinking purposes due to high nitrate content mostly introduced because of the anthropogenic activities. Suitability of groundwater for irrigation purposes was determined using of Sodium Adsorption Ratio (SAR), Permeability Index (PI), Kelly Ratio (KR), Magnesium Hazard (MH), Sodium (%) and Residual Sodium Carbonate (RSC). Groundwater in the region is suitable for irrigation.

scholarly journals Hydrochemical Characteristics and Evaluation of Groundwater Quality of Tumkur Amanikere Lake Watershed, Karnataka, India

2009 ◽  
Vol 6 (s1) ◽  
pp. S211-S218 ◽  
Author(s):  
D. S. Rajendra Prasad ◽  
C. Sadashivaiah ◽  
G. Rangnna
Keyword(s):  
Groundwater Quality ◽  
Catchment Area ◽  
Sodium Adsorption Ratio ◽  
Hydrochemical Facies ◽  
Hydrochemical Characteristics ◽  
Groundwater Samples ◽  
The Us ◽  
National Highway ◽  
Average Rainfall

The study area, Tumkur amanikere lake watershed, is located 0.5 km away from Tumkur Town on National Highway No.4. The main source of water for this lake is Kallur village tank catchment area. The average rainfall in the area is 965 mm. The submersion area of the lake at MWL is 204 hectares. Groundwater samples were collected from 22 stations covering the area during the year 2008 and were analyzed for physicochemical characters. The type of water that predominated in the study area is Ca-Mg-Cl type, was assessed based on hydrochemical facies. Besides, suitability of groundwater for irrigation was evaluated based on sodium adsorption ratio, percent sodium, and the US salinity diagrams.

scholarly journals Assessment of Groundwater Pollution and its Impact in and around Punnam Area of Karur District, Tamilnadu, India

2010 ◽  
Vol 7 (2) ◽  
pp. 473-478 ◽  
Author(s):  
G. Raja ◽  
P. Venkatesan
Keyword(s):  
Electrical Conductivity ◽  
Physicochemical Parameters ◽  
Quality Standards ◽  
Physicochemical Characteristics ◽  
Total Dissolved Solids ◽  
Water Quality Standards ◽  
Standard Procedures ◽  
Groundwater Samples ◽  
Calcium And Magnesium

Various samples of groundwater were collected from different areas in and around the Punnam village of Karur District, India and analyzed for their physicochemical characteristics. The results of this analysis were compared with the water quality standards of WHO and CPHEEO. In this analysis the various physicochemical parameters such as pH, electrical conductivity, turbidity, total dissolved solids, Cl-, F-, SO42-, NO3-, Na+, K+, Fe, Cr, calcium and magnesiumetc., were determined using standard procedures. The quality of groundwater samples were discussed with respect to these parameters and thus an attempt were made to ascertain the quality of groundwater used for drinking and cooking purposes in the sampling areas.

scholarly journals Assessment of Drinking Water Quality of Different Areas in Tehsil Isa Khel, Mianwali, Punjab, Pakistan

2021 ◽  
Vol 22 (2) ◽  
pp. 376-387
Author(s):  
Hizbullah Khan ◽  
Muhammad Najeeb Khan ◽  
Muhammad Sirajuddin ◽  
Syed Muhammad Salman ◽  
Muhammad Bilal
Keyword(s):  
Electrical Conductivity ◽  
Drinking Water ◽  
Chloride Ion ◽  
Integrated Approach ◽  
Total Alkalinity ◽  
Total Hardness ◽  
Safe Drinking Water ◽  
Ultimate Result ◽  
Very High

Water samples were collected from 43 sites of Tehsil Isa Khel areas in order to determine the physicochemical parameters such as pH, electrical conductivity, turbidity, total hardness, calcium hardness, magnesium hardness, M. alkalinity, chloride ion (Cl- ), and fluoride ion (F-) concentration. The obtained results show that in Tehsil Isa Khel, only in Kala Bagh city, Kala Bagh water scheme (w/s), Tola Bangi Khel w/s, Kot Chandna, Awan Wala, Gidran Wala, and Cheena Pora water is drinkable. Overall, electrical conductivity, hardness, total alkalinity, chloride, fluoride levels in the water of Tehsil Isa Khel are very high and not fit for drinking, washing, and industrial purpose. The ultimate result of this study is helpful to address the leading cause of public health problems related to the deteriorated quality of drinking water, and an integrated approach is therefore required to provide safe drinking water to people in Tehsil Isa Khel.

Sign in / Sign up

Export Citation Format

Share Document