scholarly journals Effects of compressing parameters and Mg(OH)2 content on mechanical properties and flame retardancy of rice straw-fibre reinforced composites

2021 ◽  
Vol 63 (4) ◽  
pp. 28-35
Author(s):  
Doan Van Hong Thien ◽  
◽  
Thao Phuong Nguyen ◽  
Mong Linh Nguyen Thi ◽  
Ngoc Tuyet Tran ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Rice Straw ◽  
Flame Retardancy ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Reinforced Composites ◽  
Fibre Reinforced Composites ◽  
Compression Temperature ◽  
Properties Of Composites

Rice straw fibre was utilized for unidirectional (UD) composites. In this study, the effects of compression temperature, duration, pressure, and fibre volume fraction on the mechanical properties of composites were investigated, respectively. The composite with optimal mechanical properties was prepared at a temperature of 180oC, pressure of 125 kg.cm-2 for 10 min, and at a fibre volume fraction of 40%. Mg(OH)2 was found to be an appropriate additive to enhance the flame retardancy of the composite. Interestingly, this agent also improved the mechanical and thermal insulation properties of the obtained composite.

scholarly journals Modified rule of Mixtures for prediction of Tensile strength of Unidirectional Fibre Reinforced Composites

1997 ◽  
Vol 6 (5) ◽  
pp. 096369359700600 ◽  
Author(s):  
C. S. Lee ◽  
W. Hwang
Keyword(s):  
Tensile Strength ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Reinforced Composites ◽  
Strength Data ◽  
Rule Of Mixtures ◽  
Unidirectional Fibre ◽  
Fibre Reinforced Composites ◽  
Good Agreement

The rule of mixtures was modified based on the concept of effective fibre volume fraction. The degradation parameter of effective fibre volume fraction was proposed in consideration of the microgeometry of composite components. It was shown that the modified rule has good agreement with the experimental strength data and the degradation parameter of effective fibre volume fraction used in this study can be used on general composites.

scholarly journals Preparation of Solution Impregnated Continuous Carbon Fibre Reinforced Poly (Phthalazinone Ether Sulfone Ketone) Composites

2009 ◽  
Vol 18 (1) ◽  
pp. 096369350901800 ◽  
Author(s):  
Liang Zheng ◽  
Gong Xiong Liao ◽  
Xi Gao Jian
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibre ◽  
Polymer Solution ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Hot Press ◽  
Molding Method ◽  
Press Molding ◽  
Properties Of Composites

Continuous carbon fibre reinforced Poly (phthalazinone ether sulfone ketone) (PPESK) composites were prepared using a solution impregnation process and hot-press molding method. The effects of polymer solution viscosities on fibre impregnation, fibre volume fraction and thereby on mechanical properties of composites were studied. The results show that the fibre impregnation and fibre volume fraction decreased with increasing polymer solution viscosities, and the mechanical properties of composites mainly depended on the fibre volume content.

An experimental study on the interdependence of mercerization, moisture absorption and mechanical properties of sustainable Phoenix sp. fibre-reinforced epoxy composites

2018 ◽  
Vol 49 (9) ◽  
pp. 1233-1251 ◽  
Author(s):  
G Rajeshkumar
Keyword(s):  
Mechanical Properties ◽  
Moisture Absorption ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Length ◽  
Fibre Volume ◽  
Epoxy Composites ◽  
Compression Moulding ◽  
Fibre Matrix ◽  
Fibre Reinforced Composites

This paper represents the first effort aimed to study the interdependence of mercerization, moisture absorption and mechanical properties of sustainable Phoenix sp. fibre-reinforced epoxy composites fabricated by compression moulding technique. The investigation was carried out by varying the fibre length (10, 20 and 30 mm), fibre volume fraction (10%, 20%, 30%, 40% and 50%), concentration of sodium hydroxide for fibre treatment (5%, 10% and 15%) and immersion temperature (10℃, 30℃ and 60℃). The fibre–matrix interface and failure mechanism was studied by using scanning electron microscopy. The results revealed that the moisture absorption rate increased with the increase in fibre length, fibre volume fraction and immersion temperature result in loss of tensile and flexural properties. The moisture absorbed samples shows 15% and 7% drop in tensile and flexural strength, respectively. However, this loss was less in mercerized fibre-reinforced composites.

Effect of fibre content on the mechanical properties of hemp fibre woven fabrics/polypropylene composite laminates

2021 ◽  
pp. 096739112110239
Author(s):  
Sheedev Antony ◽  
Abel Cherouat ◽  
Guillaume Montay
Keyword(s):  
Mechanical Properties ◽  
Polymer Matrix ◽  
Composite Laminates ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Woven Fabrics ◽  
Fibre Content ◽  
Viscoelastic Behaviour ◽  
Hemp Fibre

Nowadays natural fibre composites have gained great significance as reinforcements in polymer matrix composites. Composite material based on a polymer matrix reinforced with natural fibres is extensively used in industry due to their biodegradability, recyclability, low density and high specific properties. A study has been carried out here to investigate the fibre volume fraction effect of hemp fibre woven fabrics/PolyPropylene (PP) composite laminates on the tensile properties and impact hammer impact test. Initially, composite sheets were fabricated by the thermal-compression process with desired number of fabric layers to obtain composite laminates with different fibre volume fraction. Uniaxial, shear and biaxial tensile tests were performed and mechanical properties were calculated. Impact hammer test was also carried out to estimate the frequency and damping parameters of stratified composite plates. Scanning Electron Microscope (SEM) analysis was performed to observe the matrix and fibre constituent defects. Hemp fabrics/PP composite laminates exhibits viscoelastic behaviour and as the fibre volume fraction increases, the viscoelastic behaviour decreases to elastic behaviour. Due to this, the tensile strength increases as the fibre content increases. On the other hand, the natural frequency increases and damping ratio decrease as the fibre volume fraction increases.

New Development of Cattail Fibre in Composite Uses

2013 ◽  
Vol 746 ◽  
pp. 385-389
Author(s):  
Li Yan Liu ◽  
Yu Ping Chen ◽  
Jing Zhu
Keyword(s):  
Mechanical Properties ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Environmental Benefits ◽  
Bending Properties ◽  
New Development ◽  
Original Plant ◽  
Reinforcing Material ◽  
Pp Composites

This paper is aiming to develop the cattail fibre as reinforcing material due to its environmental benefits and excellent physical and insulated characteristics. The current work is concerned with the development of the technical fibres from the original plant and research on their reinforcing properties in the innovative composites. Polypropylene (PP) fibre was used as matrix in this research which was fabricated into fibre mats with cattail fibre together with different fibre volume fractions. Cattail fibre reinforced PP laminates were manufactured and compared with jute/PP composites. The tensile and bending properties of laminates were tested. The SEM micrographs of fracture surface of the laminates were analyzed as well. The results reveal that the tensile and bending properties of cattail/PP laminates are closed to those of jute/PP composites. The mechanical properties of cattail/jute/PP laminates with fibre volume fraction of 20/35/45 is betther than those of laminate reinforced with cattail fibers.

scholarly journals The Mechanical Properties of Steel-Polypropylene Fibre Composites Concrete (HyFRCC)

2015 ◽  
Vol 773-774 ◽  
pp. 949-953 ◽  
Author(s):  
Izni Syahrizal Ibrahim ◽  
Wan Amizah Wan Jusoh ◽  
Abdul Rahman Mohd Sam ◽  
Nur Ain Mustapa ◽  
Sk Muiz Sk Abdul Razak
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Concrete Strength ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Polypropylene Fibre ◽  
Experimental Results

This paper discusses the experimental results on the mechanical properties of hybrid fibre reinforced composite concrete (HyFRCC) containing different proportions of steel fibre (SF) and polypropylene fibre (PPF). The mechanical properties include compressive strength, tensile strength, and flexural strength. SF is known to enhance the flexural and tensile strengths, and at the same time is able to resist the formation of macro cracking. Meanwhile, PPF contributes to the tensile strain capacity and compressive strength, and also delay the formation of micro cracks. Hooked-end deformed type SF fibre with 60 mm length and fibrillated virgin type PPF fibre with 19 mm length are used in this study. Meanwhile, the concrete strength is maintained for grade C30. The percentage proportion of SF-PPF fibres are varied in the range of 100-0%, 75-25%, 50-50%, 25-75% and 0-100% of which the total fibre volume fraction (Vf) is fixed at 0.5%. The experimental results reveal that the percentage proportion of SF-PPF fibres with 75-25% produced the maximum performance of flexural strength, tensile strength and flexural toughness. Meanwhile, the percentage proportion of SF-PPF fibres with 100-0% contributes to the improvement of the compressive strength compared to that of plain concrete.

Development and characterization of thermoset nanocomposites reinforced with cotton fibres recovered from textile waste

2020 ◽  
pp. 152808372091353 ◽  
Author(s):  
Zunjarrao Kamble ◽  
Bijoya Kumar Behera ◽  
Teruo Kimura ◽  
Ino Haruhiro
Keyword(s):  
Mechanical Properties ◽  
Graphite Oxide ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Oxide Nanoparticles ◽  
Degradation Behaviour ◽  
Textile Waste ◽  
Cotton Fibres ◽  
Thermoset Epoxy

The present research reports thermoset nanocomposites reinforced with cotton fibres extracted from textile waste called as ‘shoddy’ and graphite oxide nanoparticles as filler. The oriented fibre web of shoddy was produced by using the carding machine and it was used as reinforcement. The thermoset epoxy composites with four different fibre volume fraction values namely 0.1, 0.2, 0.3 and 0.4 were developed. These composites were characterized by mechanical properties to optimize the fibre volume fraction. Further, thermoset epoxy nanocomposites were developed by incorporating graphite oxide nanoparticles as filler in four different weight percentages, namely 0.1, 0.3, 0.5 and 1%. All the composites were characterized for mechanical properties, dynamic mechanical properties, thermal degradation behaviour and water absorption behaviour. It has been found that the developed composites can be used in items of furniture materials and to develop some visible and non-visible automotive components.

Investigation of crack paths in natural fibre-reinforced composites

2015 ◽  
Author(s):  
S. Keck ◽  
M. Fulland
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Crack Growth ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Natural Fibres ◽  
Reinforced Composites ◽  
Crack Paths ◽  
Fibre Reinforced Composites

Nowadays, fibre-reinforced composite materials are widely used in many fields, e.g. automotive and aerospace. Natural fibres such as flax and hemp provide good density specific mechanical properties. Additionally, the embodied production energy in natural fibres is much smaller than in synthetic ones. Within this paper the fracture mechanical behaviour of flax fibre-reinforced composites is discussed. Especially, this paper focuses on the determination and investigation of crack paths in compact tension specimens with three different fibre directions under a static as well as fatigue load. Differences and similarities in the obtained crack paths under different loading conditions are presented. Due to the pronounced orthotropic behaviour of those materials the crack path is not only governed by the stress state, but practically determined by the fibre direction and fibre volume fraction. Therefore, the well-known stress intensity factor solutions for the standard specimens are not applicable. It is necessary to carry out extensive numerical simulations to evaluate the stress intensity factor evolution along the growing crack in order to be able to determine fatigue crack growth rate curves. Those numerical crack growth simulations are performed with the three-dimensional crack simulation program ADAPCRACK3D to gain energy release rates and in addition stress intensity factors.

Sign in / Sign up

Export Citation Format

Share Document