scholarly journals Physicochemical characterisation and in vitro evaluation of modified release matrix tablets: The role of different grades of hydroxypropylmethyl cellulose

2018 ◽  
Vol 63 (02) ◽  
pp. 37-47
Author(s):  
Vesna Petrovska Jovanovska ◽  
Ljupco Pejov ◽  
Aleksandra Petrovska ◽  
Sonja Ugarkovic ◽  
Maja Simonoska Crcarevska ◽  
...  
Keyword(s):  
Water Soluble ◽  
Matrix Tablets ◽  
Polymer Chains ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Prolonged Release ◽  
Matrix Tablet ◽  
Hydroxypropylmethyl Cellulose ◽  
Release Data

The purpose of this work was to formulate prolonged release matrix tablets with water soluble opioid drug (API) using different types of hydroxypropylmethyl cellulose (Methocel) as controlled release polymers. Methocel K100M was incorporated as intra-granular polymer (sample 1) along with Methocel K4M (sample 2) or Methocel K15M (sample 3) as extra-granular polymers. The final blends and tablets prepared by wet granulation process were fully characterized. Results showed that the polymer used extra-granularly significantly affects the tablet properties. By incorporation of Methocel extra granularly (samples 2 and 3), the hardness and tensile strength of the tablets increased and the total tablet porosity decreased. Sample 1, containing only Methocel K100M (intra granularly) has the lowest index of swelling and the fastest release of API probably due to the cross-linking of the polymer chains during the process of wet granulation. Also, the type of Methocel used extra-granularly (with different viscosity grade) was found to significantly affect the swelling ratio of the designed matrix systems and the drug release behavior. Sample 2 containing Methocel K4M extra-granularly has a lower index of swelling and faster release of API compared to sample 3. Considering the release mechanism, release data showed best fitting to the heuristic model proposed by Korsmeyer-Peppas. Two additional approaches were used for mathematical modeling of the release data in order to make them directly applicable for our experimental results. Keywords: matrix tablet, water soluble opioid drug, prolonged release, HPMC (Methocel)

scholarly journals Gel Strength of Hydrophilic Matrix Tablets in Terms of In Vitro Robustness

2021 ◽  
Author(s):  
Seyedreza Goldoozian ◽  
Valentyn Mohylyuk ◽  
Andriy Dashevskiy ◽  
Roland Bodmeier
Keyword(s):  
Mechanical Stress ◽  
Gel Strength ◽  
Water Soluble ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Mechanical Forces ◽  
Hydrophilic Matrix ◽  
Paddle Apparatus

Abstract Purpose The purpose of this study was to correlate the gel strength of swollen matrix tablets with their in vitro robustness against agitation intensity and applied mechanical forces. Five commercial products, i.e. Glucophage®, Alfuzosin®, Tromphyllin®, Preductal® MR and Quetiapin® formulated as water-soluble/erodible matrix tablets were investigated. Methods Effect of agitation speed (50–150 rpm) on drug release, hydration/erosion and gel strength was investigated using USP paddle apparatus II. The gel strength of matrix tablets during dissolution at different conditions was characterized by a texture analyzer. Results Commercial tablets formulated with HPMC of higher viscosity, such as K15M or K100M, demonstrated the gel strength in swollen state >0.02 MPa. In this case, the release mechanism was predominantly diffusional and, therefore, not affected by stirring speed and mechanical stress. In contrast, the Quetiapin® matrix tablet, formulated with HPMC K 4 M in amount of approx. 25%, demonstrated the gel strength dropped below 0.02 MPa after 6 h of release. In this case, the drug was predominantly released via erosional mechanism and very susceptible to stirring speed. Conclusion Sufficient gel strength of swollen tablets is an important prerequisite for unchanged in vitro performance in consideration of mechanical stress.

Formulation and Evaluation of Atenolol and Indapamide SR Matrix Tablets for Treatment of Hypertension

2014 ◽  
Vol 7 (2) ◽  
pp. 2450-2458
Author(s):  
Sarika Pundir ◽  
Ashutosh Badola
Keyword(s):  
Kinetic Studies ◽  
Film Coating ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Simultaneous Estimation ◽  
Matrix Tablet ◽  
Release Agent ◽  
Disintegration Time ◽  
Weight Variation

In the present study we have formulated (F1 to F6) matrix tablets of atenolol and indapamide for the management of hypertension. As in simultaneous estimation of these drugs it was found that a confined release can be formulated. In the formulation of SR matrix tablet by using different concentration of delayed release agent DCP and pregelatinized starch as disintegrant we prepared tablets by wet granulation method. For sustained release action HPMC polymers were used for film coating. Preformulation studies were performed prior to compression. The compressed SR matrix tablets were evaluated for weight variation, hardness, friability, drug content, disintegration time and in vitro drug release using USP dissolution apparatus type 2 (paddle). It was found that the optimized formulation showed 49.33%, 48.90%, 48.52%, 47.65%, 46.84% and 46.51% release for atenolol in 12 hours respectively. However, indapamide released 49.62%, 49.39%, 48.72%, 48.27%, 47.59% and 47.36% at the end of 12 hr. The IR spectrum study revealed that there is no disturbance in the principal peaks of pure drugs atenolol and indapamide. This confirms the integrity of pure drugs and no incompatibility of them with excipients. The stability studies were carried out for the optimized batch for one months and it showed satisfactory results. The kinetic studies of the formulations revealed that diffusion is the predominant mechanism of drug and release follows Zero-order, Super case II transport.

scholarly journals FORMULATION AND EVALUATION OF SUSTAINED RELEASE MATRIX TABLET OF LORNOXICAM BY DIRECT COMPRESSION METHOD

2021 ◽  
Vol 10 (5) ◽  
pp. 131-136
Author(s):  
Asim pasha ◽  
C N Somashekhar
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Prolonged Release ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Dissolution Profile ◽  
Drug Content

The aim of the present work was to develop sustained release Lornoxicam matrix tablets with polymers like HPMC K15M, Ethyl cellulose, and Crospovidone as carriers in varying quantities. Direct compression was used to make matrix tablets. Various assessment parameters, such as hardness, friability, thickness, percent drug content, weight variation, and so on, were applied to the prepared formulations. In vitro dissolution studies were carried out for 24 hrs. The tablets were subjected to in-vitro drug release in (pH 1.2) for first 2 hrs. Then followed by (pH 6.8) phosphate buffer for next 22 hrs. And the results showed that among the six formulations FL3 showed good dissolution profile to control the drug release respectively. The drug and polymer compatibility were tested using FT-IR spectroscopy, which revealed that the drug was compatible with all polymers. It is also required to design an appropriate prolonged release formulation for Lornoxicam in order to maintain the drug's release. Hence by using the compatible polymers sustained release tablets were formulated and subjected for various types of evaluation parameters like friability, hardness, drug content and dissolution behaviour. Finally, the findings reveal that the prepared sustained release matrix tablets of lornoxicam have improved efficacy and patient compliance.

scholarly journals Optimizing the Role of Polymer Blend in the Preparation of Acyclovir Controlled-Release Tablets: An Approach for Better Patient Compliance

2018 ◽  
Author(s):  
Barkat Khan ◽  
Faheem Haider ◽  
Kifayat Shah ◽  
Bushra Uzair ◽  
Kaijian Hou ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Kinetics ◽  
Immediate Release ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Solubility Study ◽  
Release Data

This study was carried out to formulate and evaluate controlled release (CR) matrix tablets of Acyclovir using combination of hydrophilic and hydrophobic polymers. Acyclovir is a guanine derivative and is its half-life is short hence administered five times a day using immediate release tablets. Six formulations (F1-F6) were developed using Ethocel and Carbopol in equal combinations at drug-polymer (D:P) ratio of 10:5, 10:6, 10:7, 10:8, 10:9 and 10:10. Solubility study was performed using six different solvents. The compatibility studies were carried out using FTIR and DSC. According to USP, Quality Control and dimensional tests (hardness, friability, disintegration and thickness) were executed. In-vitro drug release studies of Acyclovir was carried out in dissolution apparatus using using 0.1 N HCl medium at constant temperature of 37 ± 0.5 ºC. In order to analyze the drug release kinetics, five different mathematical models were applied to the release data. The results showed that there was no incompatibility between drug and polymers. Physical QC tests were found within limits of USP. The release was retarded upto 24 hrs and non-fickian in-vitro drug release mechanism was found. A formulation developed using blend of polymers, showed excellent retention and desired release profiles thus providing absolute control for 24 hrs.

scholarly journals Response Surface Optimization of Sustained Release Metformin-Hydrochloride Matrix Tablets: Influence of Some Hydrophillic Polymers on the Release

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Amitava Roy ◽  
Kalpana Roy ◽  
Sarbani Roy ◽  
Jyotirmoy Deb ◽  
Amitava Ghosh ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Hydroxypropyl Methylcellulose ◽  
Dissolution Kinetics ◽  
Matrix Tablets ◽  
Metformin Hydrochloride ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Response Surface Optimization

The aim of the present work was designed to develop a model-sustained release matrix tablet formulation for Metformin hydrochloride using wet granulation technique. In the present study the formulation design was employed to statistically optimize different parameters of Metformin hydrochloride tablets at different drug-to-polymer ratios employing polymers Hydroxypropyl methylcellulose of two grades K4M and K100M as two independent variables whereas the dependent variables studied were X60, X120, T50, T90, n, and b values obtained from dissolution kinetics data. The in vitro drug release studies were carried out at simulated intestinal fluids, and the release showed a non-Fickian anomalous transport mechanism. The drug release was found to reveal zero order kinetics. The granules and the tablets were tested for their normal physical, morphological, and analytical parameters and were found to be within the satisfactory levels. There were no significant drug-polymer interactions as revealed by infrared spectra. It has been found out that on an optimum increased Hydroxypropyl methylcellulose K100M concentration and decreased Hydroxypropyl methylcellulose K4M concentration the formulations were elegant in terms of their release profiles and were found to be statistically significant and generable.

scholarly journals Formulation and In Vitro Evaluation of Sustained Release Matrix Tablets of Venlafaxine

2017 ◽  
Vol II (I) ◽  
pp. 10-24
Author(s):  
Zubair Anwar ◽  
Tanveer Ahmed Khan ◽  
Muhammad Farhan Sohail ◽  
Maryam Anwar
Keyword(s):  
Sustained Release ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Burst Release ◽  
Sustained Effect ◽  
Release Data ◽  
Drug Studies

Sustained release matrix tablets of venlafaxine were formulated using synthetic polymers (ethylcellulose & hydroxypropyl methylcellulose). Six (06) different batches of matrix tablets of venlafaxine (dose 75 mg) were prepared by the wet granulation method. Polymers were used alone or in combination. The physical properties of compressed tablets were evaluated. In vitro release drug studies were performed in phosphate buffer at pH 6.8 over 24 hours. The drug release data fitted well to the First-order (R2 = 0.9725 � 0.9900). The n value obtained for most batches ranged from 0.523 to 0.946 indicates that the drug is released through an anomalous or non�Fickian transport. Results revealed that the combination of ethyl cellulose (EC) and hydroxypropyl methylcellulose produced a sustained effect compared to hydroxypropyl methylcellulose alone. Formulation F6 containing single polymer (EC) showed the highest control over initial burst release, and extended-release of the drug continued up to 16 hours.

scholarly journals Formulation and Evaluation of Gabapentin Sustained Release Matrix Tablet Using Hibiscus rosa sinensis Leaves Mucilage as Release Retardant

2021 ◽  
pp. 564-572
Author(s):  
P. Amsa ◽  
G. K. Mathan ◽  
S. Magibalan ◽  
E. K. Velliyangiri ◽  
T. Kalaivani ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Magnesium Stearate ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Hibiscus Rosa Sinensis

The major goal of this study was to develop and evaluate Sustained release matrix tablets of Gabapentin with Hibiscus rosa - sinensis leaves mucilage prepared by using wet granulation technique with microcrystalline cellulose as a diluents and magnesium stearate as a lubricant. Pre-compression and post-compression evaluation of physicochemical parameters were carried out and to be within acceptable limits. Drug and polymer compatibility were validated by FTIR measurements. Further, tablets were evaluated for in vitro release study. To get the sustained release of Gabapentin, the concentration of Hibiscus rosa- sinensis mucilage was tuned with a gas-generating agent. The % drug release of all formulation from F1 to F5 showed 91.24%, 80.24%, 70.53%, 62.12% and 49.83% respectively. All the dosage form release kinetics was computed using zero order, first order, Higuchi, and Korsmeyer–Peppas methods. From the above results, it is concluded that the n value of formulation F5 showed 0.78 suggesting anomalous (non-fickian) behavior of the drug. Mucilage from the leaves of Hibiscus rosa-sinensis has a great retarding effect in drug release from sustained release tablets.

scholarly journals DESIGN AND IN VITRO CHARACTERIZATION OF FLOATING TABLETS OF METRONIDAZOLE

2019 ◽  
pp. 539-544
Author(s):  
CHINNA ESWARAIAH M ◽  
JAYA S
Keyword(s):  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Content Uniformity ◽  
Matrix Tablet ◽  
N Value

Objective: The objective of the present study was to formulate the effervescent floating matrix tablet of metronidazole and to evaluate the effect of varying concentrations of hydrophilic polymers on drug release. Methods: Drug excipients interaction was studied by Fourier transform infrared spectrophotometer. The effervescent floating matrix tablets were prepared by direct compression technique using hydroxypropyl methylcellulose (HPMCK4) and xanthan gum alone and in combination as release retardants. Microcrystalline cellulose was used as diluent. Sodium bicarbonate was used as effervescent agent. The prepared matrix tablets were evaluated for their physicochemical parameters such as weight variation, hardness, friability, content uniformity, buoyancy time, and in vitro dissolution. Results: Micromeritic properties and post-compression parameters were evaluated and all the parameters were found within the acceptable limit. The drug release data were subjected to different models to evaluate release kinetics and mechanism of drug release. The matrix tablets prepared with xanthan gum and a mixture of xanthan gum and HPMCK4 were retarded the drug release up to 12 h. The release mechanism of metronidazole was evaluated on the basis of release exponent n value in Peppas model. The n value of the formulations ranged from 0.46 to 0.89 which indicated Case II transport and zero-order release. Conclusion: Floating matrix tablet is the simple, efficient, and economic method to sustain the release of metronidazole to eradicate Helicobacter pylori in peptic ulcer disease.

scholarly journals Design, Fabrication and Evaluation of Drug Release Kinetics from Aceclofenac Matrix Tablets using Hydroxypropyl Methyl Cellulose

1970 ◽  
Vol 8 (1) ◽  
pp. 23-30 ◽  
Author(s):  
Abul Kalam Lutful Kabir ◽  
Bishyajit Kumar Biswas ◽  
Abu Shara Shasur Rouf
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Matrix Tablets ◽  
Angle Of Repose ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Drug Content ◽  
Compressibility Index

The objective of this study was to develop a sustained release matrix tablet of aceclofenac usinghydroxypropyl methylcellulose (HPMC K15M and HPMC K100M CR) in various proportions as release controllingfactor by direct compression method. The powders for tableting were evaluated for angle of repose, loose bulkdensity, tapped bulk density, compressibility index, total porosity and drug content etc. The tablets were subjected tothickness, weight variation test, drug content, hardness, friability and in vitro release studies. The in vitro dissolutionstudy was carried out for 24 hours using United States Pharmacopoeia (USP) 22 paddle-type dissolution apparatus inphosphate buffer (pH 7.4). The granules showed satisfactory flow properties, compressibility index and drug contentetc. All the tablets complied with pharmacopoeial specifications. The results of dissolution studies indicated that theformulations F-2 and F-3 could extend the drug release up to 24 hours. By comparing the dissolution profiles with themarketed product, it revealed that the formulations exhibited similar drug release profile. From this study, a decreasein release kinetics of the drug was observed when the polymer concentration was increased. Kinetic modeling of invitro dissolution profiles revealed the drug release mechanism ranges from diffusion controlled or Fickian transport toanomalous type or non-Fickian transport, which was only dependent on the type and amount of polymer used. Thedrug release followed both diffusion and erosion mechanism in all cases. The drug release from these formulationswas satisfactory after 3 months storage in 40°C and 75% RH. Besides, this study explored the optimum concentrationand effect of polymer(s) on acelofenac release pattern from the tablet matrix for 24 hour period.Key words: Aceclofenac; sustained release; hydrophillic matrix; HPMC; direct compression.DOI: 10.3329/dujps.v8i1.5332Dhaka Univ. J. Pharm. Sci. 8(1): 23-30, 2009 (June)

scholarly journals FORMULATION AND EVALUATION OF SYNTHESIZED QUINAZOLINONE DERIVATIVE FOR COLON SPECIFIC DRUG DELIVERY

2017 ◽  
Vol 10 (3) ◽  
pp. 207
Author(s):  
Vidya Viswanad ◽  
Shammika P ◽  
Aneesh Tp
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Site Specific ◽  
The Matrix

ABSTRACTObjective: The current research deals with the formulation and evaluation of synthesized quinazolinone derivative for colon site specific delivery.Methods: The synthesized quinazolinone derivative was enteric coated 5% Eudragit L-100 with by wet granulation method using guar gum, pectin,and guar gum pectin combination as hydrophilic polymer. The prepared matrix tablet was characterized by differential scanning calorimetry andevaluated for different pre-compression and post-compression studies and drug release profiles.Results: All the matrix tablets were within the range of pharmacopeial limits with better flow properties. All the six formulations of matrix tablets haddisintegrated within 5-6 minutes. The optimized formulation selected was F6 formulation combination of guar gum and pectin with 95.79% of drugrelease than compared to the remaining formulation. The optimized matrix tablets followed zero order kinetics with Fickian diffusion.Conclusion: The results proposed that the combination of guar gum and pectin coated tablet with 5% Eudragit L-100 of synthesized quinazolinonederivative is a promising colon site specific delivery.Keywords: Quinazolinone derivative, In vitro drug release, Disintegration time, Guar gum, Pectin, 5% Eudragit L-100, Colon site-specific delivery, Wetgranulation, Compression.

Sign in / Sign up

Export Citation Format

Share Document