scholarly journals Optimal Scheduling of Plug-in Electric Vehicle Charging Including Time-of-Use Tariff to Minimize Cost and System Stress

Energies ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1500 ◽  
Author(s):  
Hadi Suyono ◽  
Mir Toufikur Rahman ◽  
Hazlie Mokhlis ◽  
Mohamadariff Othman ◽  
Hazlee Azil Illias ◽  
...  
Keyword(s):  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Binary Particle Swarm Optimization ◽  
Technological Advancement ◽  
Voltage Profile ◽  
Electric Vehicle Charging ◽  
Voltage Deviation ◽  
Residential Distribution ◽  
Stress Minimization

Technological advancement, environmental concerns, and social factors have made plug-in electric vehicles (PEVs) popular and attractive vehicles. Such a trend has caused major impacts to electrical distribution systems in terms of efficiency, stability, and reliability. Moreover, excessive power loss, severe voltage deviation, transformer overload, and system blackouts will happen if PEV charging activities are not coordinated well. This paper presents an optimal charging coordination method for a random arrival of PEVs in a residential distribution network with minimum power loss and voltage deviation. The method also incorporates capacitor switching and on-load tap changer adjustment for further improvement of the voltage profile. The meta-heuristic methods, binary particle swarm optimization (BPSO) and binary grey wolf optimization (BGWO), are employed in this paper. The proposed method considers a time-of-use (ToU) electricity tariff such that PEV users will get more benefits. The random PEV arrival is considered based on the driving pattern of four different regions. To demonstrate the effectiveness of the proposed method, comprehensive analysis is conducted using a modified of IEEE 31 bus system with three different PEV penetrations. The results indicate a promising outcome in terms of cost and the distribution system stress minimization.

Meta-Heuristic BPSO Based Voltage Profile Enhancement in Radial Distribution System Through Network Reconfiguration

2019 ◽  
Vol 20 (6) ◽  
Author(s):  
Mounika Kannan ◽  
Kirithikaa Sampath ◽  
Srividhya Pattabiraman ◽  
K Narayanan ◽  
Tomonobu Senjyu
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Heuristic Method ◽  
Binary Particle Swarm Optimization ◽  
Voltage Profile ◽  
Voltage Deviation ◽  
Node Voltage ◽  
The Impact

Abstract Abnormal Voltages in electrical distribution system is a threat to power system security and may cause equipment damages. Reconfiguration aids in the proper distribution of load and thus improving the voltage profile. The multi objective framework including node voltage deviation as primary objective and power loss and reliability as secondary objectives is formulated. The novel meta heuristic method based on binary particle swarm optimization (BPSO) is employed to find the optimal radial distribution network configuration for an assortment of objective function. The effect of inertia weight, position and population of swarm is deeply investigated. The proposed method has been verified on IEEE 33 and 69 bus radial distribution systems and found to be effective in minimizing node voltage deviation. The impact of the reconfigured system on voltage deviation, power loss and reliability has been studied extensively. BPSO calculations are found to be simple and has good Convergence characteristics in comparison with other meta heuristic techniques.

Optimal Capacitors in Radial Distribution System for Loss Reduction and Voltage Enhancement

2016 ◽  
Vol 2 (3) ◽  
pp. 566 ◽  
Author(s):  
S. Bhongade ◽  
Sachin Arya
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Pso Algorithm ◽  
Load Flow ◽  
Base Case ◽  
Voltage Profile ◽  
Radial Distribution System ◽  
Case Load

The work presented in this paper is carried out with the objective of identifying the optimal location and size (Kvar ratings) of shunt capacitors to be placed in radial distribution system, to have overall economy considering the saving due to energy loss minimization. To achieve this objective, a two stage methodology is adopted in this paper. In the first stage, the base case load flow of uncompensated distribution system is carried out. On the basis of base case load flow solution, Nominal voltage magnitudes and Loss Sensitivity Factors are calculated and the weak buses are selected for capacitor placement.In the second stage, Particle Swarm Optimization (PSO) algorithm is used to identify the size of the capacitors to be placed at the selected buses for minimizing the power loss. The developed algorithm is tested for 10-bus, 34-bus and 85-bus Radial Distribution Systems. The results show that there has been an enhancement in voltage profile and reduction in power loss thus resulting in much annual saving.

scholarly journals Recloser-Fuse settings in distribution systems with optimizing multiple distributed generation considering technical aspects

2020 ◽  
Vol 17 (3) ◽  
pp. 1135
Author(s):  
Ahmed Mohamed Abdelbaset ◽  
AboulFotouh A. Mohamed ◽  
Essam Abou El-Zahab ◽  
M. A. Moustafa Hassan
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Test System ◽  
Optimal Size ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Power Loss Reduction ◽  
System Power

<p><span>With the widespread of using distributed generation, the connection of DGs in the distribution system causes miscoordination between protective devices. This paper introduces the problems associated with recloser fuse miscoordination (RFM) in the presence of single and multiple DG in a radial distribution system. Two Multi objective optimization problems are presented. The first is based on technical impacts to determine the optimal size and location of DG considering system power loss reduction and enhancement the voltage profile with a certain constraints and the second is used for minimizing the operating time of all fuses and recloser with obtaining the optimum settings of fuse recloser coordination characteristics. Whale Optimizer algorithm (WOA) emulated RFM as an optimization problem. The performance of the proposed methodology is applied to the standard IEEE 33 node test system. The results show the robustness of the proposed algorithm for solving the RFM problem with achieving system power loss reduction and voltage profile enhancement.</span></p>

scholarly journals Investigation of THD Analysis in Residential Distribution Systems with Different Penetration Levels of Electric Vehicles

2018 ◽  
Vol 9 (1) ◽  
pp. 21-27
Author(s):  
Jayababu Badugu ◽  
Y.P. Obulesu ◽  
Ch. Sai Babu
Keyword(s):  
Electric Vehicles ◽  
Distribution System ◽  
Distribution Systems ◽  
Harmonic Distortion ◽  
Voltage Distortion ◽  
Electric Vehicle Charging ◽  
Private And Public ◽  
Residential Distribution ◽  
Charging Stations ◽  
Ev Charging

Electric Vehicles (EVs) are becoming a viable transportation option because they are environmentally friendly and provide solutions to high oil prices. This paper investigates the impacts of electric vehicles on harmonic distortions in urban radial residential distribution systems. The accomplishment of EV innovation relies on the accessibility of EV charging stations. To meet the power demand of growing EVs, utilities are introducing EV charging stations in private and public areas; this led to a change in the residential distribution system infrastructure. In this paper, an urban radial residential distribution system with the integration of an electric vehicle charging facility is considered for investigation. An impact of different EV penetration levels on voltage distortion is analysed. Different penetration levels of EVs into the residential distribution system are considered. Simulation results are presented to validate the work carried out in this paper. An attempt has been made to establish the relationship between the level of penetration of the EVs and voltage distortion in terms of THD (Total Harmonic Distortion)

Maximum Loss Reduction and Voltage Profile Improvement with Placement of Hybrid Solar-Wind System

2013 ◽  
Vol 768 ◽  
pp. 371-377 ◽  
Author(s):  
E. Rekha ◽  
D. Sattianadan ◽  
M. Sudhakaran
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Reactive Power ◽  
Optimization Technique ◽  
Future Generation ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Voltage Profile Improvement

Distributed generators (DG) are much beneficial in reducing the losses effectively compared to other methods of loss reduction. It is expected to become more important in future generation. This paper deals with the multi DGs placement in radial distribution system to reduce the system power loss and improve the voltage profile by using the optimization technique of particle swarm optimization (PSO). The PSO provides a population-based search procedure in which individuals called particles change their positions with time. Initially, the algorithm randomly generates the particle positions representing the size and location of DG. The proposed PSO algorithm is used to determine optimal sizes and locations of multi-DGs. The objective function is the combination of real, reactive power loss and voltage profile with consideration of weights and impact indices with and without DG. Test results indicate that PSO method can obtain better results on loss reduction and voltage profile improvement than the simple heuristic search method on the IEEE33-bus and IEEE 90-bus radial distribution systems.

scholarly journals SPSO Based Optimal Integration of DGs in Local Distribution Systems under Extreme Load Growth for Smart Cities

Electronics ◽  
2021 ◽  
Vol 10 (20) ◽  
pp. 2542
Author(s):  
Mian Rizwan ◽  
Muhammad Waseem ◽  
Rehan Liaqat ◽  
Intisar Ali Sajjad ◽  
Udaya Dampage ◽  
...  
Keyword(s):  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Smart Cities ◽  
Electrical Energy ◽  
Distribution Networks ◽  
Economic Benefits ◽  
Voltage Profile ◽  
Extreme Load ◽  
System Nodes

Renewable energy-based distributed generators (DGs) are gaining more penetration in modern grids to meet the growing demand for electrical energy. The anticipated techno-economic benefits of these eco-friendly resources require their judicious and properly sized allocation in distribution networks (DNs). The preeminent objective of this research is to determine the sizing and optimal placing of DGs in the condensed DN of a smart city. The placing and sizing problem is modeled as an optimization problem to reduce the distribution loss without violating the technical constraints. The formulated model is solved for a radial distribution system with a non-uniformly distributed load utilizing the selective particle swarm optimization (SPSO) algorithm. The intended technique decreases the power loss and perfects the voltage profile at the system’s nodes. MATLAB is used for the simulation, and the obtained results are also validated by the Electrical Transient Analysis Program (ETAP). Results show that placing optimally sized DGs at optimal system nodes offers a considerable decline in power loss with an improved voltage profile at the network’s nodes. Distribution system operators can utilize the proposed technique to realize the reliable operation of overloaded urban networks.

scholarly journals Optimal Reconfiguration of Distribution Network in Presence of D-STATCOM and Photovoltaic Array using a Metaheuristic Algorithm

2020 ◽  
Vol 4 (5) ◽  
Author(s):  
Kola Sampangi Sambaiah ◽  
T. Jayabarathi
Keyword(s):  
Optimization Algorithm ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Flower Pollination Algorithm ◽  
Network Reconfiguration ◽  
Voltage Profile ◽  
Photovoltaic Array ◽  
Optimal Network ◽  
Grasshopper Optimization Algorithm

In this paper, grasshopper optimization algorithm (GOA) a novel meta-heuristic optimization algorithm is used to solve the network reconfiguration problem in presence of distribution static compensator (D-STATCOM) and photovoltaic (PV) arrays in a distribution system. Here, D-STATCOM acts as distribution flexible ac transmission (D-FACT) device and PV arrays as decentralized or distributed generation (DG). The main purpose of the present research includes power loss minimization and voltage profile (VP) enhancement in radial distribution systems under different loading conditions. The proposed GOA is based on swarming behavior of grasshoppers in nature. The proposed GOA is validated using the standard 33, 69 and 118 – bus test systems. The simulation results proved that the optimal network reconfiguration in presence of D-STATCOM units and PV arrays leads to significant reduction in power loss and enhancement in VP. The results obtained by the proposed GOA are compared with base value and found that the optimal network reconfiguration in presence of D-STATCOM and PV arrays is more beneficial than individual objective optimization. Also, the proposed GOA is more accurate, efficient and reliable in finding optimal solution when compared to existing modified flower pollination algorithm (MFPA), firework algorithm (FWA), fuzzy-based ant colony optimization (ACO) and genetic algorithm (GA).

scholarly journals A new meta-heuristic pathfinder algorithm for solving optimal allocation of solar photovoltaic system in multi-lateral distribution system for improving resilience

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Varaprasad Janamala
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Optimal Allocation ◽  
Photovoltaic System ◽  
Solar Photovoltaic ◽  
Voltage Profile ◽  
Pv System ◽  
Solar Photovoltaic System ◽  
The Impact

AbstractA new meta-heuristic Pathfinder Algorithm (PFA) is adopted in this paper for optimal allocation and simultaneous integration of a solar photovoltaic system among multi-laterals, called interline-photovoltaic (I-PV) system. At first, the performance of PFA is evaluated by solving the optimal allocation of distribution generation problem in IEEE 33- and 69-bus systems for loss minimization. The obtained results show that the performance of proposed PFA is superior to PSO, TLBO, CSA, and GOA and other approaches cited in literature. The comparison of different performance measures of 50 independent trail runs predominantly shows the effectiveness of PFA and its efficiency for global optima. Subsequently, PFA is implemented for determining the optimal I-PV configuration considering the resilience without compromising the various operational and radiality constraints. Different case studies are simulated and the impact of the I-PV system is analyzed in terms of voltage profile and voltage stability. The proposed optimal I-PV configuration resulted in loss reduction of 77.87% and 98.33% in IEEE 33- and 69-bus systems, respectively. Further, the reduced average voltage deviation index and increased voltage stability index result in an improved voltage profile and enhanced voltage stability margin in radial distribution systems and its suitability for practical applications.

Sign in / Sign up

Export Citation Format

Share Document