scholarly journals Theoretical and Experimental Studies of Uneven Dust Suction from a Multi-Cyclone Settling Tank in a Two-Stage Air Filter

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8396
Author(s):  
Tadeusz Dziubak
Keyword(s):  
Internal Structure ◽  
Separation Efficiency ◽  
Settling Tank ◽  
Experimental Studies ◽  
Experimental Tests ◽  
Air Filter ◽  
Pressure Drops ◽  
Dust Trap ◽  
Air Stream ◽  
Before And After

In this paper, the uneven air stream distribution problem of individual cyclones is studied in the multi-cyclones of intake air filters in special vehicles’ engines. This problem increases in multi-cyclones, in which several dozen cyclones have a common dust trap from which the collected dust is continuously removed by ejection suction. The aim of this study is the recognition of the theoretical and experimental possibility of reducing the streams’ unevenness, which should result in an efficiency increase in multi-cyclone separation. The methods that led to obtaining a relative stream uniformity from the suction of individual cyclones was analyzed. The method for creating equal pressure drops between the suction streams in the channels was used to achieve this goal. For this purpose, the internal structure of the multi-cyclone settler was changed. The multi-cyclone settling tank space was divided by vertical partitions into independent segments. The settling tank segment was then divided with horizontal shelves into suction channels of different heights, which were assigned a specific number of individual cyclones. The suction channels’ height was theoretically selected in terms of the equal resistance to air stream flow through the channels. For this purpose, the multi-cyclone dust settler segment model was developed. The theoretically determined suction channel’s height was verified by performing experimental flow tests in four (A, B, C, D) dust settler variants. Suction streams of satisfactory uniformity from the cyclones of the variant D settling tank were obtained at a level of 5%. In the next stage, experimental tests of the segment cyclones were carried out with dust before and after the division into suction channels of variant D for the settling tank. A significant increase was achieved from 93.73% to 96.08% in the cyclones’ separation efficiency, which were located as far away from the suction stub as possible and led to a reduction in the non-uniformity of cyclone efficiency in the segment. It follows that the multi-cyclone dust settling segment’s internal structure change gave the expected results.

Experimental Studies Concerning the Semipermeable Membrane Separation Efficiency for 134Cs, 137Cs, 57Co, 58Co, 60Co, 54Mn in Liquid Radioactive Waste I. Treatment of secondary waste from POD decontamination procedure

2008 ◽  
Vol 59 (5) ◽  
Author(s):  
Mirela Dulama ◽  
Nicoleta Deneanu ◽  
Cristian Dulama ◽  
Margarit Pavelescu
Keyword(s):  
Membrane Separation ◽  
Separation Efficiency ◽  
Liquid Radioactive Waste ◽  
Experimental Studies ◽  
Experimental Tests ◽  
Suspended Solid ◽  
Process Efficiency ◽  
Active Charcoal ◽  
Precipitation Process ◽  
Pre Treatment

The paper presents the experimental tests concerning the treatment by membrane techniques of radioactive aqueous waste. Solutions, which have been treated by using the bench-scale installation, were radioactive simulated secondary wastes from the decontamination process with modified POD. Generally, an increasing of the retention is observed for most of the contaminants in the reverse osmosis experiments with pre-treatment steps. The main reason for taking a chemical treatment approach was to selectively remove soluble contaminants from the waste. In the optimization part of the precipitation step, several precipitation processes were compared. Based on this comparison, mixed [Fe(CN)6]4-/Al3+/Fe2+ was selected as a precipitation process applicable for precipitation of radionuclides and flocculation of suspended solid. Increased efficiencies for cesium radionuclides removal were obtained in natural zeolite adsorption pre-treatment stages and this was due to the fact that volcanic tuff used has a special affinity for this element. Usually, the addition of powdered active charcoal serves as an advanced purifying method used to remove organic compounds and residual radionuclides; thus by analyzing the experimental data (for POD wastes) one can observe a decreasing of about 50% for cobalt isotopes subsequently to the active charcoal adsorption.. The semipermeable membranes were used, which were prepared by the researchers from the Research Center for Macromolecular Materials and Membranes, Bucharest. The process efficiency was monitored by gamma spectrometry.

Automatic Tread Gaging Machine

1979 ◽  
Vol 7 (1) ◽  
pp. 31-39
Author(s):  
G. S. Ludwig ◽  
F. C. Brenner
Keyword(s):  
Experimental Tests ◽  
Automatic Machine ◽  
Wear Rates ◽  
Handling Device ◽  
Straight Line ◽  
Component Systems ◽  
Before And After ◽  
Good Repeatability ◽  
The Difference ◽  
Straight Lines

Abstract An automatic tread gaging machine has been developed. It consists of three component systems: (1) a laser gaging head, (2) a tire handling device, and (3) a computer that controls the movement of the tire handling machine, processes the data, and computes the least-squares straight line from which a wear rate may be estimated. Experimental tests show that the machine has good repeatability. In comparisons with measurements obtained by a hand gage, the automatic machine gives smaller average groove depths. The difference before and after a period of wear for both methods of measurement are the same. Wear rates estimated from the slopes of straight lines fitted to both sets of data are not significantly different.

scholarly journals Experimental and Numerical Investigation on the Perforation Resistance of Double-Layered Metal Shield under High-Velocity Impact of Armor-Piercing Projectiles

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 626
Author(s):  
Riccardo Scazzosi ◽  
Marco Giglio ◽  
Andrea Manes
Keyword(s):  
High Strength Steel ◽  
Steel Plate ◽  
Experimental Studies ◽  
Practical Interest ◽  
High Strength ◽  
Experimental Tests ◽  
Element Model ◽  
Transportation Systems ◽  
Metal Shield ◽  
Softening Parameter

In the case of protection of transportation systems, the optimization of the shield is of practical interest to reduce the weight of such components and thus increase the payload or reduce the fuel consumption. As far as metal shields are concerned, some investigations based on numerical simulations showed that a multi-layered configuration made of layers of different metals could be a promising solution to reduce the weight of the shield. However, only a few experimental studies on this subject are available. The aim of this study is therefore to discuss whether or not a monolithic shield can be substituted by a double-layered configuration manufactured from two different metals and if such a configuration can guarantee the same perforation resistance at a lower weight. In order to answer this question, the performance of a ballistic shield constituted of a layer of high-strength steel and a layer of an aluminum alloy impacted by an armor piercing projectile was investigated in experimental tests. Furthermore, an axisymmetric finite element model was developed. The effect of the strain rate hardening parameter C and the thermal softening parameter m of the Johnson–Cook constitutive model was investigated. The numerical model was used to understand the perforation process and the energy dissipation mechanism inside the target. It was found that if the high-strength steel plate is used as a front layer, the specific ballistic energy increases by 54% with respect to the monolithic high-strength steel plate. On the other hand, the specific ballistic energy decreases if the aluminum plate is used as the front layer.

scholarly journals Thermal Inertia Characterization of Multilayer Lightweight Walls: Numerical Analysis and Experimental Validation

2021 ◽  
Vol 11 (11) ◽  
pp. 5008
Author(s):  
Juan José del Coz-Díaz ◽  
Felipe Pedro Álvarez-Rabanal ◽  
Mar Alonso-Martínez ◽  
Juan Enrique Martínez-Martínez
Keyword(s):  
Lightweight Concrete ◽  
Thermal Flux ◽  
Experimental Studies ◽  
Thermal Inertia ◽  
Transient State ◽  
Experimental Tests ◽  
Building Design ◽  
Experimental Methodology ◽  
Improve Energy Efficiency ◽  
Concrete Blocks

The thermal inertia properties of construction elements have gained a great deal of importance in building design over the last few years. Many investigations have shown that this is the key factor to improve energy efficiency and obtain optimal comfort conditions in buildings. However, experimental tests are expensive and time consuming and the development of new products requires shorter analysis times. In this sense, the goal of this research is to analyze the thermal behavior of a wall made up of lightweight concrete blocks covered with layers of insulating materials in steady- and transient-state conditions. For this, numerical and experimental studies were done, taking outdoor temperature and relative humidity as a function of time into account. Furthermore, multi-criteria optimization based on the design of the experimental methodology is used to minimize errors in thermal material properties and to understand the main parameters that influence the numerical simulation of thermal inertia. Numerical Finite Element Models (FEM) will take conduction, convection and radiation phenomena in the recesses of lightweight concrete blocks into account, as well as the film conditions established in the UNE-EN ISO 6946 standard. Finally, the numerical ISO-13786 standard and the experimental results are compared in terms of wall thermal transmittance, thermal flux, and temperature evolution, as well as the dynamic thermal inertia parameters, showing a good agreement in some cases, allowing builders, architects, and engineers to develop new construction elements in a short time with the new proposed methodology.

Comparative Study on Compositions of Oil-Water Transition Layer before and after ClO2-Treatment Process

2013 ◽  
Vol 652-654 ◽  
pp. 749-752
Author(s):  
Dan Dan Yuan ◽  
Hong Jun Wu ◽  
Hai Xia Sheng ◽  
Xin Sui ◽  
Bao Hui Wang
Keyword(s):  
Chemical Composition ◽  
Transition Layer ◽  
Solid Phase ◽  
Settling Tank ◽  
Physical Structure ◽  
Solid Particles ◽  
Viscosity Reduction ◽  
Insoluble Residue ◽  
Before And After ◽  
Oil Water

In order to meet the need of separating oil from water in the settling tank of the oilfield, ClO2 treatment for oil-water transition layer in settling tank is introduced. The field test displayed that the technique was achieved by a good performance. For understanding the oxidation and mechanism, compositions of oil-water transition layer were comparatively studied for before/after ClO2-treatment in this paper.The experimental results show that the compositions before and after ClO2-treatment, including physical structure and chemical composition, were varied in the great extension. The physical structure, consisting of water, oil and solid phase, was reduced to less than 5% of water and 0.5% of solid particle and increased to 95% of oil in layer compared with before-treatment, easily leading to clearly separating water from oil. The chemical composition of iron sulfide and acid insoluble substance in solid phase was decreased to more than 90% while the carbonate was reduced more than 70% . After the treatment, the viscosity reduction of the water phase in the layer was reached to 50% after oxidation demulsification with ClO2. The chemistry was discussed based on the principles and experiments. Due to ClO2 destroying (oxidizing) the rigid interface membrane structure which is supported by natural surfactant, polymer and solid particles with interface-active materials, the action accelerates the separating of water and oil and sedimentation of insoluble residue of acid in the layer. By demonstrating the experimental data and discussion, we can effectively control the oxidation performance of chlorine dioxide, which is very meaningful for oilfield on the aspect of stable production of petroleum.

The effects of aquatic therapy on mobility of individuals with neurological diseases: a systematic review

2014 ◽  
Vol 29 (8) ◽  
pp. 741-751 ◽  
Author(s):  
Andresa R Marinho-Buzelli ◽  
Alison M Bonnyman ◽  
Mary C Verrier
Keyword(s):  
Randomized Controlled Trials ◽  
Gait Speed ◽  
Neurological Diseases ◽  
Dynamic Balance ◽  
Experimental Studies ◽  
Controlled Trials ◽  
Aquatic Therapy ◽  
Randomized Controlled ◽  
Randomized Studies ◽  
Before And After

Objective:To summarize evidence on the effects of aquatic therapy on mobility in individuals with neurological diseases.Data sources:MEDLINE, EMBASE, PsycInfo, CENTRAL, CINAHL, SPORTDiscus, PEDro, PsycBITE and OT Seeker were searched from inception to 15 September 2014. Hand-searching of reference lists was performed in the selected studies.Review methods:The search included randomized controlled trials and quasi-experimental studies that investigated the use of aquatic therapy and its effect on mobility of adults with neurological diseases. One reviewer screened titles and abstracts of retrieved studies from the search strategy. Two reviewers independently examined the full texts and conducted the study selection, data extraction and quality assessment. A narrative synthesis of data was applied to summarize information from included studies. The Downs and Black Scale was used to assess methodological quality.Results:A total of 116 articles were obtained for full text eligibility. Twenty studies met the specified inclusion criteria: four Randomized Controlled Trials (RCTs), four non-randomized studies and 12 before-and-after tests. Two RCTs (30 patients with stroke in the aquatic therapy groups), three non-randomized studies and three before-and-after studies showed “fair” evidence that aquatic therapy increases dynamic balance in participants with some neurological disorders. One RCT (seven patients with stroke in the aquatic therapy group) and two before-and-after tests (20 patients with multiple sclerosis) demonstrated “fair” evidence on improvement of gait speed after aquatic therapy.Conclusion:Our synthesis showed “fair” evidence supporting the use of aquatic therapy to improve dynamic balance and gait speed in adults with certain neurological conditions.

scholarly journals Tribological Behavior of Laser Textured Hot Stamping Dies

2016 ◽  
Vol 2016 ◽  
pp. 1-15 ◽  
Author(s):  
Andre Shihomatsu ◽  
Sergio Tonini Button ◽  
Iris Bento da Silva
Keyword(s):  
Surface Topography ◽  
High Pressures ◽  
Hot Stamping ◽  
High Strength Steels ◽  
High Strength ◽  
Experimental Tests ◽  
Textured Surface ◽  
Laser Texturing ◽  
Stamping Dies ◽  
Before And After

Hot stamping of high strength steels has been continuously developed in the automotive industry to improve mechanical properties and surface quality of stamped components. One of the main challenges faced by researchers and technicians is to improve stamping dies lifetime by reducing the wear caused by high pressures and temperatures present during the process. This paper analyzes the laser texturing of hot stamping dies and discusses how different surfaces textures influence the lubrication and wear mechanisms. To this purpose, experimental tests and numerical simulation were carried out to define the die region to be texturized and to characterize the textured surface topography before and after hot stamping tests with a 3D surface profilometer and scanning electron microscopy. Results showed that laser texturing influences the lubrication at the interface die-hot sheet and improves die lifetime. In this work, the best texture presented dimples with the highest diameter, depth, and spacing, with the surface topography and dimples morphology practically preserved after the hot stamping tests.

Application of Thermo-Frictional and Chemical-Thermal Methods Treatments for Surface Strengthening of Materials

2021 ◽  
Vol 1038 ◽  
pp. 93-99
Author(s):  
Alexander Levterov ◽  
Julia Nechitailo ◽  
Tatyana Plugina ◽  
Oleg Volkov
Keyword(s):  
Cross Sections ◽  
Experimental Studies ◽  
Metallographic Analysis ◽  
Thermal Treatments ◽  
Strengthening Effect ◽  
Thermal Methods ◽  
Surface Strengthening ◽  
Before And After ◽  
The Cross

In the article, the issues of using the methods of thermo-frictional and chemical-thermal treatments for surface strengthening of steel tools were disclosed. 65G steel and U8A steel were considered. A flat graver and a cylindrical root roller were considered to be tools in need of hardening. The nature of the jewellery work using such a tool has been described. Hardening techniques, experimental studies and macro photographs of the samples were presented in this article. A detailed metallographic analysis and measurement of the microhardness of the cross-sections of the prototypes after their strengthening using various methods was carried out. The metallographic nature of the reinforcement with the formation of surface "white layers" was shown. Comparison of the properties of the samples before and after strengthening was carried out. Conclusions about the strengthening effect of the thermo-frictional and chemical-thermal methods of strengthening were made.

scholarly journals Does Social Exclusion Alter Sensory and Pain Thresholds in Children and Adolescents with Functional Abdominal Pain? – Results from a Preliminary Study

Pain Medicine ◽  
2018 ◽  
Vol 20 (8) ◽  
pp. 1472-1478
Author(s):  
Marco Daniel Gulewitsch ◽  
Aiste Jusyte ◽  
Katja Weimer ◽  
Michael Schönenberg
Keyword(s):  
Abdominal Pain ◽  
Social Exclusion ◽  
Experimental Studies ◽  
Control Group ◽  
Childhood And Adolescence ◽  
Sensory Threshold ◽  
Functional Abdominal Pain ◽  
Pain Thresholds ◽  
Before And After ◽  
Underlying Mechanisms

Abstract Objective Functional abdominal pain (AP) is a prevalent issue in childhood and adolescence. The contribution of psychosocial factors in the development and maintenance of this health problem is rather unclear, and experimental studies about underlying mechanisms are lacking. This study investigates whether experimentally induced social exclusion decreases sensory and pain thresholds in children suffering from AP. Subjects Twenty children/adolescents with AP and 22 healthy controls. Methods Children/adolescents participated in the Cyberball paradigm, which affects an experience of social exclusion. Thermal sensory and pain thresholds were measured before and after Cyberball. Results Children/adolescents with AP showed a divergent reaction regarding their sensory threshold after social exclusion: The control group exhibited a tendency toward a decreased sensory threshold whereas the AP group remained stable. Concerning the pain threshold, no effect of social exclusion could be identified. The increase of both thresholds (“numbing”) after Cyberball was positively correlated with symptoms of mental health issues. Conclusions This is the first study to investigate changes in sensory and pain thresholds following painful social interactions in a sample of children/adolescents with a chronic pain condition. Results suggest that AP and control children differ in their reaction of sensory thresholds, which might indicate an altered processing of social exclusion. Replication and further methodological improvements are needed.

Sign in / Sign up

Export Citation Format

Share Document