scholarly journals Supporting Facility Management Processes through End-Users’ Integration and Coordinated BIM-GIS Technologies

2018 ◽  
Vol 7 (5) ◽  
pp. 191 ◽  
Author(s):  
Claudio Mirarchi ◽  
Alberto Pavan ◽  
Francesco De Marco ◽  
Xiangyu Wang ◽  
Yongze Song
2020 ◽  
Vol 25 ◽  
pp. 233-253
Author(s):  
Silvia Mastrolembo Ventura ◽  
Fadi Castronovo ◽  
Angelo L.C. Ciribini

Research and applications related to Virtual Reality (VR) in the Architecture, Engineering, Construction and Facility Management (AEC/FM) industry are steadily increasing, being considered as one of the current trends in digital innovation. A convergence is currently on-going between Building Information Modelling (BIM), VR implementation and the soft landings principles, which highlight the need for a smooth transition from design to operation through the early involvement of clients and end-users. In particular, immersive virtual environments could allow stakeholders to experience the full-scale representation of a virtual facility prototype in an intuitive and engaging manner through immersion and sense of presence, promoting feedback collection during usability-focused design review meetings. On the other hand, despite the renewed interest in immersive VR, both technological and procedural challenges to its effective implementation still exist. The latter are within the scope of this study, which aims to address them in a systematic way as a comprehensive guideline for clients and design teams. This study describes the development of a VR-aided usability-focused design review session protocol for implementing immersive VR when clients and end-users are involved in design review meetings. It is the result of an inductive approach associated with qualitative research methods for data collection and data analysis. A case study has been selected as a main research method for facing the first step into the research problem. A further iteration of data collection and analysis was adopted to guarantee the validity of the research, including talks with experts and literature comparison. Finally, the session protocol has been developed in the form of a process map representing all the necessary phases and activities to consider for the effective adoption of immersive VR to evaluate design intents with clients and end-users. As a comprehensive summary, the session protocol fills a gap in the research on the adoption of virtual reality in the AEC industry, which was lacking a prescriptive and structured process to drive the effective use of this technology in collaborative meetings and decision-making processes.


2021 ◽  
Vol 18 ◽  
pp. 360-366
Author(s):  
Lukáš Pavlík ◽  
Ekaterina Chytilová ◽  
Jarmila Zimmermannová

Many healthcare organizations are exposed to various cyber threats. The increase in the frequency of these cyber threats can also be observed during the Covid-19 pandemic. The security of information systems in hospitals and their management is also not part of the management of facilities in these organizations. The paper presents the possibilities of securing facility management processes in healthcare organizations from a security point of view. There is an analysis of security aspects of a particular medical facility and its information system with emphasis on the application of regular facility management. Analysis and evaluation of tools for ensuring the security of the hospital information network is also applied. The contribution of the paper is the identification and expression of the correlation between cyber threats and the following modules of the information system in the medical facility. Another part of the proven research compares safety mechanisms and their possible failure in a selected hospital. The main research results, which are based on the evaluation of safety aspects in these organizations, can be further used as a platform for the effectiveness of processes in healthcare and thus increase synergies between safety levels and ensure facility management processes


2019 ◽  
Vol 110 ◽  
pp. 02123 ◽  
Author(s):  
Dmitriy Proskurin ◽  
Yuliya Vorobeva

The classification of regional electronic information resources is given. The main type of interaction between the subjects and objects of regional management is defined - interaction through electronic information resources. The main factors hindering the digital transformation of the Voronezh region are highlighted. The models of digital transition for different regions are given. Formed proposals for the digital transformation of the Voronezh region. The necessity of creating a single digital platform - an information-analytical model of the region, through which studies of the interdisciplinary nature of factors directly or indirectly affecting the socio-economic development of the territory can be carried out. A key mechanism in the work of the platform is proposed - a dynamic feedback loop applied at any level of regional management from an urban facility to a single community or individual consumer.


Author(s):  
Nabilatul Fanny ◽  
Anindiya Soviani

Patient safety is a system that makes patient care safer, including risk assessment, identificationand management of patient risks, incident reporting and analysis, the ability to learn from incidents andtheir follow-up, and implementation of solutions to minimize risks and prevent injury caused by errors.the result of carrying out an action or not taking the action that should be taken The importance of riskmanagement in the hospital is to minimize the number of unwanted events. Based on a preliminary studyof five medical record processing at the Dr Soediran Mangun Sumarso Wonogiri Regional Hospital, thebigger risk is filing, in the medical record unit there is no standard risk management operationalprocedure and there is no report related to risk management. This type of research is descriptive with across sectional approach. The subjects are the Facility Management and Safety coordinator, head ofmedical records, and head of filing. The object of the filing room and the risk management process. Theresearch instruments were observation guidelines and interview guidelines. Data analysis was carriedout by univariate. The results show that risk management at Dr Soediran Mangun Soemarso WonogiriHospital has been carried out. Safety Facility Management is a working group to plan risk managementin each unit. The medical record unit of Dr Soediran Mangun Soemarso Wonogiri Hospital implementsrisk management with an appropriate sequence of risk management processes starting fromcommunication consultation, scope of context criteria, risk assessment, risk treatment, monitoring andreview. In the filing section of the Dr Soediran Mangun Soemarso Wonogiri Regional Hospital, there isone important stage that is overlooked in the risk management process, namely the scope, context, andcriteria stages. The conclusion of this study is that the Facility and Safety Management section hasimplemented a risk management process in the medical record unit but has not been maximallyimplemented in the filing section.


Author(s):  
Sudha Krishnamurthy ◽  
Omer Anson ◽  
Lior Sapir ◽  
Chanan Glezer ◽  
Mauro Rois ◽  
...  

Facilities ◽  
2007 ◽  
Vol 25 (13/14) ◽  
pp. 493-506 ◽  
Author(s):  
Vishal Sharma ◽  
Jochen Abel ◽  
Mohamed Al‐Hussein ◽  
Kunibert Lennerts ◽  
Uwe Pfründer

Facilities ◽  
2018 ◽  
Vol 36 (13/14) ◽  
pp. 676-695 ◽  
Author(s):  
J. J. McArthur ◽  
Brandon Bortoluzzi

Purpose This paper aims to respond to the high cost of facility management-enabled building information model (FM-BIM) creation and maintenance, a significant and under-researched barrier to adoption for existing buildings. The resultant approach focuses on only value-adding content (“Lean”) developed flexibly and iteratively in collaboration with end-users (“Agile”). Design/methodology/approach Five case studies were developed for university and hospital buildings in collaboration with end-users, guided by the process presented. These informed the refinement of a robust and flexible approach to increase BIM functionality with minimal geometry, focusing instead on the development of specific parameters to map semantic information necessary for each desired FM use. Findings The resulting BIM provided a breadth of model functionality with minimal modeling effort: 15 hours average implementation time per supported FM use. This low level of effort was achieved by limiting geometry to where it is necessary for the FM use implementation. Instead, the model incorporated the majority of geometry by reference and focused on semantic and topological parameters to house FM information. Research limitations/implications This study provides the basis for a new ontology structure focused on defining the rules for hosting asset management data (host entity, parameter type and characteristics) to reduce the reliance on complex geometric model development. Practical implications By prioritizing highly beneficial applications, early investment is minimized, providing quick returns at low risk, demonstrating the value of FM-BIM to end-users. Originality/value The Lean-Agile approach addresses the known research gap of low-effort, flexible approaches to FM-BIM model creation and maintenance and its effectiveness is analyzed through five case studies.


Facilities ◽  
2019 ◽  
Vol 37 (9/10) ◽  
pp. 550-570 ◽  
Author(s):  
Marit Støre-Valen ◽  
Martine Buser

Purpose The development of sustainable facilities management (FM) practices requires active and integrated engagement of the FM organization. Building on a three-year research project (2015-2018) within Nordic Built that aims to strengthen FM competencies in the Scandinavian countries, this paper aims to list and document the challenges and barriers of implementing sustainability as identified by the Scandinavian FM practitioners who took part in this research. Design/methodology/approach The paper builds on the understanding gained from using an interpretive sociological approach and uses qualitative mixed methods to collect data from four workshops, group sessions and expert group discussions with a mix of representatives including owners, property managers, facilities managers, consultants, teachers and academics. Four case studies were completed of refurbishment projects implementing sustainable solutions; these encompassed in-depth interviews with the stakeholders, site visits, observations of meetings and gathering project documentation. The data were complemented by a systematic literature review on a selection of topics focusing on articles referring directly to FM, the sustainability of FM, ends-user and stakeholder involvement, energy performance and sustainability. The challenges and barriers identified in practice were compared to those found in the literature. Findings The concept of sustainability, and its different dimensions and implications, seems to be well understood now by the practitioners who participated in this study, who claimed they were able to provide the required solutions. What seems to be lacking, though, is the possibility of convincing the end-users, who are expected to operate and maintain the facilities, to act according to the standards that these solutions require. It appears to be easier to focus on the technical aspects than on the end-users’ behaviors. The practitioners reported a shortage of social competencies and tools to deal with the situation, and despite an increasing awareness of smart technology, they lacked solutions to engage the end-users in optimizing the facilities. Besides, not all FM companies were well equipped to face the challenges imposed by the sustainable agenda; the small and medium enterprises in particular seemed to be struggling to implement the different dimensions of sustainability. Research limitations/implications The limitation of this research rests in the chosen research approach as it focuses on the FM practitioners. The contribution of the end-users’ perspective is not strongly represented or systematically explored, but is identified as a new topic that needs to be investigated further to provide further insight. This study focuses on refurbishment and/or retrofit of existing buildings and the operation of facilities. The authors do not embrace the design phase or the construction phase of new buildings. Practical implications The paper underlines the need for frameworks and concrete tools to help FM practitioners to integrate the social and cultural aspects of sustainability. It identifies end-users, both in housing and in offices, as creating a bottleneck to the implementation of sustainable FM. To gain insight into this bottleneck, the authors suggest implementing a sociologically inspired method using an integrative approach. Highlighting such issues will mean that future research will be able to define further solutions for managing and maintaining existing and future built assets and fulfilling sustainability requirements by engaging end-users. This study also emphasizes the need to introduce these topics as part of the curriculum for FM education. Originality/value This paper provides an update on the level of the development of sustainable FM in the three Scandinavian countries. This is highly relevant for Scandinavian practitioners, but the authors consider this relevant for international practitioners, researchers, academics and teachers and developers as well. Practitioners and researchers are invited to join in these efforts to explore how to find practical frameworks, tools, policies and instruments and new services that will improve sustainable FM practices.


Sign in / Sign up

Export Citation Format

Share Document