scholarly journals Reconstruction of the Daily MODIS Land Surface Temperature Product Using the Two-Step Improved Similar Pixels Method

2021 ◽  
Vol 13 (9) ◽  
pp. 1671
Author(s):  
Junlei Tan ◽  
Tao Che ◽  
Jian Wang ◽  
Ji Liang ◽  
Yang Zhang ◽  
...  
Keyword(s):  
Land Cover ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Water Cycle ◽  
Ancillary Data ◽  
Land Cover Types ◽  
Modis Land Surface Temperature ◽  
Yearly Average

The MODIS land surface temperature (LST) product is one of the most widely used data sources to study the climate and energy-water cycle at a global scale. However, the large number of invalid values caused by cloud cover limits the wide application of the MODIS LST. In this study, a two-step improved similar pixels (TISP) method was proposed for cloudy sky LST reconstruction. The TISP method was validated using a temperature-based method over various land cover types. The ground measurements were collected at fifteen stations from 2013 to 2018 during the Heihe Watershed Allied Telemetry Experimental Research (HiWATER) field campaign in China. The estimated theoretical clear-sky temperature indicates that clouds cool the land surface during the daytime and warm it at nighttime. For bare land, the surface temperature shows a clear seasonal trend and very similar across stations, with a cooling amplitude of 4.14 K in the daytime and a warming amplitude of 3.99 K at nighttime, as a yearly average. The validation result showed that the reconstructed LST is highly consistent with in situ measurements and comparable with MODIS LST validation accuracy, with a mean bias of 0.15 K at night (−0.43 K in the day), mean RMSE of 2.91 K at night (4.41 K in the day), and mean R2 of 0.93 at night (0.90 in the day). The developed method maximizes the potential of obtaining quality MODIS LST retrievals, ancillary data, and in situ observations, and the results show high accuracy for most land cover types.

scholarly journals Cooling Effect of Different Land Cover Types: A Case Study in Xi’an and Xianyang, China

2021 ◽  
Vol 13 (3) ◽  
pp. 1099
Author(s):  
Yuhe Ma ◽  
Mudan Zhao ◽  
Jianbo Li ◽  
Jian Wang ◽  
Lifa Hu
Keyword(s):  
Land Cover ◽  
Surface Temperature ◽  
Urban Heat Island ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Cooling Effect ◽  
Heat Island ◽  
Land Cover Types ◽  
Island Effect ◽  
Urban Heat

One of the climate problems caused by rapid urbanization is the urban heat island effect, which directly threatens the human survival environment. In general, some land cover types, such as vegetation and water, are generally considered to alleviate the urban heat island effect, because these landscapes can significantly reduce the temperature of the surrounding environment, known as the cold island effect. However, this phenomenon varies over different geographical locations, climates, and other environmental factors. Therefore, how to reasonably configure these land cover types with the cooling effect from the perspective of urban planning is a great challenge, and it is necessary to find the regularity of this effect by designing experiments in more cities. In this study, land cover (LC) classification and land surface temperature (LST) of Xi’an, Xianyang and its surrounding areas were obtained by Landsat-8 images. The land types with cooling effect were identified and their ideal configuration was discussed through grid analysis, distance analysis, landscape index analysis and correlation analysis. The results showed that an obvious cooling effect occurred in both woodland and water at different spatial scales. The cooling distance of woodland is 330 m, much more than that of water (180 m), but the land surface temperature around water decreased more than that around the woodland within the cooling distance. In the specific urban planning cases, woodland can be designed with a complex shape, high tree planting density and large planting areas while water bodies with large patch areas to cool the densely built-up areas. The results of this study have utility for researchers, urban planners and urban designers seeking how to efficiently and reasonably rearrange landscapes with cooling effect and in urban land design, which is of great significance to improve urban heat island problem.

Plot-scale retrieval of land surface temperature and emissivity estimation

2021 ◽  
Author(s):  
Gitanjali Thakur ◽  
Stan Schymanski ◽  
Kaniska Mallick ◽  
Ivonne Trebs
Keyword(s):  
Land Cover ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Satellite Data ◽  
Land Surface ◽  
Longwave Radiation ◽  
Landscape Scale ◽  
The Earth ◽  
Downwelling Longwave Radiation

<p>The surface energy balance (SEB) is defined as the balance between incoming energy from the sun and outgoing energy from the Earth’s surface. All components of the SEB depend on land surface temperature (LST). Therefore, LST is an important state variable that controls the energy and water exchange between the Earth’s surface and the atmosphere. LST can be estimated radiometrically, based on the infrared radiance emanating from the surface. At the landscape scale, LST is derived from thermal radiation measured using  satellites.  At the plot scale, eddy covariance flux towers commonly record downwelling and upwelling longwave radiation, which can be inverted to retrieve LST  using the grey body equation :<br>             R<sub>lup</sub> = εσ T<sub>s</sub><sup>4</sup> + (1 − ε) R<sub> ldw         </sub>(1)<br>where R<sub>lup</sub> is the upwelling longwave radiation, R<sub>ldw</sub> is the downwelling longwave radiation, ε is the surface emissivity, <em>T<sub>s</sub>  </em>is the surface temperature and σ  is the Stefan-Boltzmann constant. The first term is the temperature-dependent part, while the second represents reflected longwave radiation. Since in the past downwelling longwave radiation was not measured routinely using flux towers, it is an established practice to only use upwelling longwave radiation for the retrieval of plot-scale LST, essentially neglecting the reflected part and shortening Eq. 1 to:<br>               R<sub>lup</sub> = εσ T<sub>s</sub><sup>4 </sup>                       (2)<br>Despite  widespread availability of downwelling longwave radiation measurements, it is still common to use the short equation (Eq. 2) for in-situ LST retrieval. This prompts the question if ignoring the downwelling longwave radiation introduces a bias in LST estimations from tower measurements. Another associated question is how to obtain the correct ε needed for in-situ LST retrievals using tower-based measurements.<br>The current work addresses these two important science questions using observed fluxes at eddy covariance towers for different land cover types. Additionally, uncertainty in retrieved LST and emissivity due to uncertainty in input fluxes was quantified using SOBOL-based uncertainty analysis (SALib). Using landscape-scale emissivity obtained from satellite data (MODIS), we found that the LST  obtained using the complete equation (Eq. 1) is 0.5 to 1.5 K lower than the short equation (Eq. 2). Also, plot-scale emissivity was estimated using observed sensible heat flux and surface-air temperature differences. Plot-scale emissivity obtained using the complete equation was generally between 0.8 to 0.98 while the short equation gave values between 0.9 to 0.98, for all land cover types. Despite additional input data for the complete equation, the uncertainty in plot-scale LST was not greater than if the short equation was used. Landscape-scale daytime LST obtained from satellite data (MODIS TERRA) were strongly correlated with our plot-scale estimates, but on average higher by 0.5 to 9 K, regardless of the equation used. However, for most sites, the correspondence between MODIS TERRA LST and retrieved plot-scale LST estimates increased significantly if plot-scale emissivity was used instead of the landscape-scale emissivity obtained from satellite data.</p>

scholarly journals Validation of Collection 6 MODIS land surface temperature product using in situ measurements

2019 ◽  
Vol 225 ◽  
pp. 16-29 ◽  
Author(s):  
Si-Bo Duan ◽  
Zhao-Liang Li ◽  
Hua Li ◽  
Frank-M. Göttsche ◽  
Hua Wu ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
In Situ Measurements ◽  
Modis Land Surface Temperature

scholarly journals Land Surface Temperature Retrieval from LANDSAT-8 Thermal Infrared Sensor Data and Validation with Infrared Thermometer Camera

2018 ◽  
Vol 7 (4.20) ◽  
pp. 608 ◽  
Author(s):  
Muhammad Mejbel Salih ◽  
Oday Zakariya Jasim ◽  
Khalid I. Hassoon ◽  
Aysar Jameel Abdalkadhum
Keyword(s):  
Land Cover ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Thermal Infrared ◽  
Landsat 8 ◽  
Infrared Sensor ◽  
Infrared Thermometer ◽  
Ground Truth Data ◽  
Land Cover Types

This paper illustrates a proposed method for the retrieval of land surface temperature (LST) from the two thermal bands of the LANDSAT-8 data. LANDSAT-8, the latest satellite from Landsat series, launched on 11 February 2013, using LANDSAT-8 Operational Line Imager and Thermal Infrared Sensor (OLI & TIRS) satellite data. LANDSAT-8 medium spatial resolution multispectral imagery presents particular interest in extracting land cover, because of the fine spectral resolution, the radiometric quantization of 12 bits. In this search a trial has been made to estimate LST over Al-Hashimiya district, south of Babylon province, middle of Iraq. Two dates images acquired on 2nd &18th of March 2018 to retrieve LST and compare them with ground truth data from infrared thermometer camera (all the measurements contacted with target by using type-k thermocouple) at the same time of images capture. The results showed that the rivers had a higher LST which is different to the other land cover types, of less than 3.47 C ◦, and the LST different for vegetation and residential area were less than 0.4 C ◦ with correlation coefficient of the two bands 10 and 11 Rbnad10= 0.70, Rband11 = 0.89 respectively, for the imaged acquired on the 2nd of march 2018 and Rband10= 0.70 and Rband11 = 0.72 on the 18th of march 2018. These results confirm that the proposed approach is effective for the retrieval of LST from the LANDSAT-8 Thermal bands, and the IR thermometer camera data which is an effective way to validate and improve the performance of LST retrieval. Generally the results show that the closer measurement taken from the scene center time, a better quality to classify the land cover. The purpose of this study is to assess the use of LANDSAT-8 data to specify temperature differences in land cover and compare the relationship between land surface temperature and land cover types.   

scholarly journals Evaluation of Collection-6 MODIS Land Surface Temperature Product Using Multi-Year Ground Measurements in an Arid Area of Northwest China

2018 ◽  
Vol 10 (11) ◽  
pp. 1852 ◽  
Author(s):  
Lei Lu ◽  
Tingjun Zhang ◽  
Tiejun Wang ◽  
Xiaoming Zhou
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Northwest China ◽  
Bare Soil ◽  
Vegetation Monitoring ◽  
Modis Land Surface Temperature ◽  
Global Circulation Models ◽  
In Situ Data

Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature (LST) products are widely used in ecology, hydrology, vegetation monitoring, and global circulation models. Compared to the collection-5 (C5) LST products, the newly released collection-6 (C6) LST products have been refined over bare soil pixels. This study aims to evaluate the C6 MODIS 1-km LST product using multi-year in situ data covering barren surfaces. Evaluation using all in situ data shows that the MODIS C6 LSTs are underestimated with a root-mean-square error (RMSE) of 2.59 K for the site in the Gobi area, 3.05 K for the site in the sand desert area, and 2.86 K for the site in the desert steppe area at daytime. For nighttime LSTs, the RMSEs are 2.01 K, 2.88 K, and 1.80 K for the three sites, respectively. Both biases and RMSEs also show strong seasonal signals. Compared to the error of C5 1-km LSTs, the RMSE of C6 1-km LST product is smaller, especially for daytime LSTs, with a value of 2.24 K compared to 3.51 K. The large errors in the sand desert region are presumably due to the lack of global representativeness of the magnitude of emissivity adjustment and misclassification for the barren surface causing error in emissivities. It indicates that the accuracy of the MODIS C6 LST product might be further improved through emissivity adjustment with globally representative magnitude and accurate land cover classification. From this study, the MODIS C6 1-km LST product is recommended for applications.

Evaluation of MODIS land surface temperature with in-situ snow surface temperature from CREST-SAFE

2017 ◽  
Vol 38 (16) ◽  
pp. 4722-4740 ◽  
Author(s):  
Carlos L. Pérez-Díaz ◽  
Tarendra Lakhankar ◽  
Peter Romanov ◽  
Jonathan Muñoz ◽  
Reza Khanbilvardi ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Snow Surface ◽  
Modis Land Surface Temperature ◽  
Snow Surface Temperature

scholarly journals THE LAND SURFACE TEMPERATURE IMPACT TO LAND COVER TYPES

2016 ◽  
Vol XLI-B3 ◽  
pp. 871-876 ◽  
Author(s):  
I. Ibrahim ◽  
A. Abu Samah ◽  
R. Fauzi ◽  
N. M. Noor
Keyword(s):  
Land Cover ◽  
Surface Temperature ◽  
Temperature Variation ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Water Bodies ◽  
Land Cover Types ◽  
Tukey Test ◽  
Bare Land ◽  
Post Hoc

Land cover type is an important signature that is usually used to understand the interaction between the ground surfaces with the local temperature. Various land cover types such as high density built up areas, vegetation, bare land and water bodies are areas where heat signature are measured using remote sensing image. The aim of this study is to analyse the impact of land surface temperature on land cover types. The objectives are 1) to analyse the mean temperature for each land cover types and 2) to analyse the relationship of temperature variation within land cover types: built up area, green area, forest, water bodies and bare land. The method used in this research was supervised classification for land cover map and mono window algorithm for land surface temperature (LST) extraction. The statistical analysis of post hoc Tukey test was used on an image captured on five available images. A pixel-based change detection was applied to the temperature and land cover images. The result of post hoc Tukey test for the images showed that these land cover types: built up-green, built up-forest, built up-water bodies have caused significant difference in the temperature variation. However, built up-bare land did not show significant impact at p<0.05. These findings show that green areas appears to have a lower temperature difference, which is between 2° to 3° Celsius compared to urban areas. The findings also show that the average temperature and the built up percentage has a moderate correlation with R<sup>2</sup> = 0.53. The environmental implications of these interactions can provide some insights for future land use planning in the region.

scholarly journals Eight-Day Daytime Land Surface Temperature Pattern over Peninsular Malaysia

2019 ◽  
Vol 8 (4) ◽  
pp. 11949-11955
Keyword(s):  
Land Cover ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Peninsular Malaysia ◽  
Series Data ◽  
Temperature Pattern ◽  
Land Cover Types ◽  
North East ◽  
South West Monsoon

The monitoring of land surface temperature (LST) can assist scientists to better understand the possible effect of climate change on land cover types and in conducting appropriate analysis. The earth's annual temperature has moved up and down a few degrees Celsius, including Malaysia, over the past few million years. The location of Malaysia near the equator line and experiences tropical monsoon season were important to take into consideration to the LST changes. In this paper, the eight-day LST time series data for 14-year period (Jan 2003 – Dec 2016) was downloaded from Moderate Resolution Imaging Spectroradiometer (MODIS) website with two types of satellites which are Terra and Aqua. This study focused on two gridded areas in Peninsular Malaysia; the first one which is exposed to North East monsoon, namely super region 21 and another one to South West monsoon, which is super region 26. These two areas are selected due to they being the largest land area covered within the grid relative to other grids. The objective of this study is to compare the eight- day daytime LST pattern between two monsoons with different land cover types for both satellites. Analysis such as cubic spline function with the annual periodic boundary condition and weighted least square (WLS) regression were performed to extract annual seasonal trend for the areas covered. The results of LST showed most of the gridded areas experience similar seasonal pattern for each year but different pattern were discovered when both monsoons were considered. Moreover, the LST trends also changed according to the land cover types over the study period

scholarly journals ANALYZING THE EFFECTS OF LAND COVER CHANGE ON SURFACE TEMPERATURE IN MOUNT MAKILING FOREST RESERVE (MMFR) AND ITS NEIGHBORING MUNICIPALITIES USING LANDSAT DATA

2019 ◽  
Vol XLII-4/W19 ◽  
pp. 165-172
Author(s):  
V. K. M. Del Mundo ◽  
C. L. Tiburan Jr.
Keyword(s):  
Land Cover ◽  
Surface Temperature ◽  
Land Cover Change ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Urban Centers ◽  
Forest Reserve ◽  
Land Cover Types ◽  
Rapid Economic Growth ◽  
Supervised Image Classification

Abstract. Land Surface Temperature (LST) is said to be affected by frequent changes in the land cover. Over the years, the immediate environs of Mount Makiling Forest Reserve (MMFR) have experienced such kind of change due to rapid economic growth of the area that also led to the expansion of urban centers. The study utilized Landsat imageries to determine the possible effects of land cover change on surface temperature using the integration of remote sensing and GIS technologies. Initially, the multispectral bands were radiometrically corrected using Dark Object Subtraction (DOS) while the thermal bands were corrected using Land Surface Emissivity (LSE). After these corrections were applied, the images were classified using supervised image classification technique where seven land cover types have been identified. The classified images were then validated using 200 reference data and this revealed an overall accuracy of 87.5% and 86.0% for the May 2003 and July 2015 images, respectively. Results showed that changes in land cover resulted to a significant change in Land Surface Temperature (LST). The LST in 2003 (16.49°C – 40.44°C) was found higher than that of 2015 which was observed between 13.35°C and 33.83°C only. The reason behind this is the increase in green spaces from 2003 to 2015. Among the major land cover types, forest lands exhibited the lowest mean surface temperature for both years having 27.27°C in 2003 and 21.35°C in 2015 while built-up areas had the highest surface temperature having 32.60°C in 2003 and 26.00°C in 2015.

Sign in / Sign up

Export Citation Format

Share Document