Characterization and Bioactivity of Hydroxyapatite-ZrO2 Composites with Commercial Inert Glass (CIG) Addition

2014 ◽  
Vol 631 ◽  
pp. 166-172
Author(s):  
B. Bulut ◽  
N. Demirkol ◽  
Ziya Engin Erkmen ◽  
E.S. Kayali
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Calcium Phosphate ◽  
Dental Implant ◽  
Compression Strength ◽  
Vickers Microhardness ◽  
Physical And Mechanical Properties ◽  
Apatite Formation ◽  
Main Component

Hydroxyapatite is a kind of calcium phosphate that has generated great interest as an advanced orthopedic and dental implant candidate. Although HA has excellent biocompatibility, it’s poor mechanical properties limit its use as an implant material. Therefore HA is preferred as a main component in composite materials. The aim of this study is to determine the characterization and bioactivity of HA-ZrO2composites with the addition of 5 and 10 wt% commercial inert glass (CIG). The highest density and Vickers microhardness were obtained in HA-ZrO2-5 wt% CIG composite sintered at 1300 °C. The highest compression strength was measured in HA-ZrO2-5 wt% CIG composite sintered at 1200 °C. Thein vitrobioactivity tests were performed on the composites having the highest physical and mechanical properties. The apatite formation was observed on all samples subjected to bioactivity tests. As a result, the optimum mechanical properties and bioactivity were obtained on HA-ZrO2- 5 wt% CIG composite sintered at 1200 °C.

Comparison of Mechanical Properties of Sheep Hydroxyapatite (SHA) and Commercial Synthetic Hydroxyapatite (CSHA)-MgO Composites

2011 ◽  
Vol 493-494 ◽  
pp. 588-593 ◽  
Author(s):  
N. Demirkol ◽  
Onur Meydanoglu ◽  
Hasan Gökçe ◽  
F.N. Oktar ◽  
E.S. Kayali
Keyword(s):  
Mechanical Properties ◽  
Compression Strength ◽  
Vickers Microhardness ◽  
Sintering Temperature ◽  
Physical And Mechanical Properties ◽  
X Ray Diffraction ◽  
Time Saving ◽  
X Ray ◽  
Density Values ◽  
Synthetic Hydroxyapatite

In this study, microstructures and mechanical properties of sheep hydroxyapatite (SHA) and commercial synthetic hydroxyapatite (CSHA)-MgO composites were investigated. The production of hydroxyapatite (HA) from natural sources is preferred due to economical and time saving reasons. The goal of development of SHA and CSHA based MgO composites is to improve mechanical properties of HA. SHA and CSHA composites were prepared with the addition of different amounts of MgO and sintered at the temperature range of 1000-1300 °C. The physical and mechanical properties were determined by measuring density, compression strength and Vickers microhardness (HV). Structural characterization was carried out with X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies. In all composites, mean density values and mechanical properties increased with increasing sintering temperature. The increase of MgO content in SHA-MgO composites showed better mechanical properties in contrast to CSHA-MgO composites. Although the highest hardness and compression strength values were obtained at the SHA-10wt% MgO composite sintered at 1300°C, higher hardness and compression strength values were achieved with 5 wt% MgO addition at the CSHA-MgO composites when compared to SHA-MgO composites sintered between 1000-1200°C.

scholarly journals Physical and Mechanical Properties of Natural Leaf Fiber-Reinforced Epoxy Polyester Composites

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1369
Author(s):  
Sanjeev Kumar ◽  
Lalta Prasad ◽  
Vinay Kumar Patel ◽  
Virendra Kumar ◽  
Anil Kumar ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Synthetic Fibre ◽  
Low Cost ◽  
Fibre Length ◽  
Physical And Mechanical Properties ◽  
Natural Fibres ◽  
Risk Environment ◽  
Insulation Property ◽  
Natural Leaf

In recent times, demand for light weight and high strength materials fabricated from natural fibres has increased tremendously. The use of natural fibres has rapidly increased due to their high availability, low density, and renewable capability over synthetic fibre. Natural leaf fibres are easy to extract from the plant (retting process is easy), which offers high stiffness, less energy consumption, less health risk, environment friendly, and better insulation property than the synthetic fibre-based composite. Natural leaf fibre composites have low machining wear with low cost and excellent performance in engineering applications, and hence established as superior reinforcing materials compared to other plant fibres. In this review, the physical and mechanical properties of different natural leaf fibre-based composites are addressed. The influences of fibre loading and fibre length on mechanical properties are discussed for different matrices-based composite materials. The surface modifications of natural fibre also play a crucial role in improving physical and mechanical properties regarding composite materials due to improved fibre/matrix adhesion. Additionally, the present review also deals with the effect of silane-treated leaf fibre-reinforced thermoset composite, which play an important role in enhancing the mechanical and physical properties of the composites.

scholarly journals Effect of Structural Differences on the Mechanical Properties of 3D Integrated Woven Spacer Sandwich Composites

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4284
Author(s):  
Lvtao Zhu ◽  
Mahfuz Bin Rahman ◽  
Zhenxing Wang
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Three Dimensional ◽  
Sheet Thickness ◽  
Physical And Mechanical Properties ◽  
Sandwich Composites ◽  
Computed Tomography Images ◽  
And Performance ◽  
Industrial Textiles ◽  
Load Conditions

Three-dimensional integrated woven spacer sandwich composites have been widely used as industrial textiles for many applications due to their superior physical and mechanical properties. In this research, 3D integrated woven spacer sandwich composites of five different specifications were produced, and the mechanical properties and performance were investigated under different load conditions. XR-CT (X-ray computed tomography) images were employed to visualize the microstructural details and analyze the fracture morphologies of fractured specimens under different load conditions. In addition, the effects of warp and weft direction, face sheet thickness, and core pile height on the mechanical properties and performance of the composite materials were analyzed. This investigation can provide significant guidance to help determine the structure of composite materials and design new products according to the required mechanical properties.

Study of Bio-Mineralization of BCP with Compensation of Calcium and Phosphate Ions

2009 ◽  
Vol 610-613 ◽  
pp. 1391-1394
Author(s):  
Hua De Zheng ◽  
Ying Jun Wang ◽  
Qiang Ma ◽  
Cheng Yun Ning ◽  
Xiao Feng Chen
Keyword(s):  
Free Energy ◽  
Calcium Phosphate ◽  
Calcium Ions ◽  
Biphasic Calcium Phosphate ◽  
Porous Ceramic ◽  
Apatite Layer ◽  
Apatite Formation ◽  
Phosphate Ions

In the present study, an Intelligent Multi-parameter Simulated Evaluation in vitro （IMSE system） was used to study the deposition properties of apatite formation on the surface of biphasic calcium phosphate porous ceramic (BCP) from static and dynamic r-SBF. Results showed that apatite formed on the surface of BCP from static and dynamic r-SBF differed between each other. In static r-SBF, ions were transferred by diffusion, which could not compensate the consuming of calcium ions, and mist apatite layer was formed on the surface of samples. But in the dynamic r-SBF, simulated fluid was adjusted precisely and flowed forcedly, the concentrations of ions were homogeneous; with the compensation of ions, calcium and phosphate were supersaturated, and the free energy of apatite formation was negative, bone-like apatite sheets were formed on the surface of samples.

The Fabricated Collagen-Based Nano-Hydroxyapatite/β-Tricalcium Phosphate Scaffolds

2012 ◽  
Vol 506 ◽  
pp. 57-60 ◽  
Author(s):  
M. Ebrahimi ◽  
Naruporn Monmaturapoj ◽  
S. Suttapreyasri ◽  
P. Pripatnanont
Keyword(s):  
Mechanical Properties ◽  
Solid State ◽  
Calcium Phosphate ◽  
Biphasic Calcium Phosphate ◽  
Single Phase ◽  
Physical And Mechanical Properties ◽  
Total Porosity ◽  
Xrd Pattern ◽  
Collagen Coating ◽  
Dimensional Shrinkage

The biphasic calcium phosphate (BCP) concept was introduced to overcome disadvantages of single phase biomaterials. In this study, we prepared BCP from nanoHA and β-TCP that were synthesized via a solid state reaction. Three different ratios of pure BCP and collagen-based BCP scaffolds (%HA/%β-TCP; 30/70, 40/60 and 50/50) were produced using a polymeric sponge method. Physical and mechanical properties of all materials and scaffolds were investigated. XRD pattern proved the purity of each HA, β-TCP and BCP. SEM showed overall distribution of macropores (80-200 µm) with appropriate interconnected porosities. Total porosity of pure BCP (93% ± 2) was found to be higher than collagen-based BCP (85%± 3). It was observed that dimensional shrinkage of larger scaffold (39% ± 4) is lower than smaller one (42% ± 5) and scaffolds with higher HA (50%) ratio experienced greater shrinkage than those with higher β-TCP (70%) ratio (45% ±3 and 36% ±1 respectively). Mechanical properties of both groups tend to be very low and collagen coating had no influence on mechanical behavior. Further studies may improve the physical properties of these composite BCP.

Effect of Wood Filler Concentration on Physical and Mechanical Properties of PLA-Based Composites

2021 ◽  
Vol 887 ◽  
pp. 110-115
Author(s):  
G.A. Sabirova ◽  
R.R. Safin ◽  
N.R. Galyavetdinov
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Composite Materials ◽  
Impact Strength ◽  
Wood Flour ◽  
Experimental Studies ◽  
Physical And Mechanical Properties ◽  
Filler Concentration ◽  
High Concentration

This paper presents the findings of experimental studies of the physical and mechanical properties of wood-filled composites based on polylactide (PLA) and vegetable filler in the form of wood flour (WF) thermally modified at 200-240 °C. It also reveals the dependence of the tensile strength, impact strength, bending elastic modulus, and density of composites on the amount of wood filler and the temperature of its thermal pre-modification. We established that an increase in the concentration of the introduced filler and the degree of its heat treatment results in a decrease of the tensile strength, impact strength and density of composite materials, while with a lower binder content, thermal modification at 200 °C has a positive effect on bending elastic modulus. We also found that 40 % content of a wood filler heated to 200 °C is sufficient to maintain relatively high physical and mechanical properties of composite materials. With a higher content of a wood filler, the cost can be reduced but the quality of products made of this material may significantly deteriorate. However, depending on the application and the life cycle of this product, it is possible to develop a formulation that includes a high concentration of filler.

Study of the Effect of PP and LDPE Thermoplastic Binder Addition on the Mechanical Properties and Physical Properties of Particulate Composites for Building Material Application

2019 ◽  
Vol 964 ◽  
pp. 115-123
Author(s):  
Sigit Tri Wicaksono ◽  
Hosta Ardhyananta ◽  
Amaliya Rasyida ◽  
Feisha Fadila Rifki
Keyword(s):  
Mechanical Properties ◽  
Compression Strength ◽  
Building Materials ◽  
Construction Material ◽  
Construction Materials ◽  
Physical And Mechanical Properties ◽  
Waste Recycling ◽  
Plastic Waste ◽  
Particulate Composites ◽  
Water Absorbability

Plastic waste is majority an organic material that cannot easily decomposed by bacteria, so it needs to be recycled. One of the utilization of plastic waste recycling is become a mixture in the manufacture of building materials such as concrete, paving block, tiles, roof. This experiment purpose to find out the effect of addition of variation of LDPE and PP thermoplastic binder to physical and mechanical properties of LDPE/PP/Sand composite for construction material application. In this experiment are using many tests, such are SEM, FTIR, compression strength, density, water absorbability, and hardness. the result after the test are the best composition of composite PP/LDPE/sand is 70/0/30 because its have compression strength 14,2 MPa, while density value was 1.30 g/cm3, for the water absorbability is 0.073%, and for the highest hardness is 62.3 hardness of shore D. From the results obtained, composite material can be classified into construction materials for mortar application S type with average compression strength is 12.4 MPa.

scholarly journals Poly(Glycerol Succinate) as an Eco-Friendly Component of PLLA and PLCL Fibres towards Medical Applications

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1731
Author(s):  
Dorota Kolbuk ◽  
Oliwia Jeznach ◽  
Michał Wrzecionek ◽  
Agnieszka Gadomska-Gajadhur
Keyword(s):  
Mechanical Properties ◽  
In Vitro Study ◽  
Medical Applications ◽  
Crystal Formation ◽  
Scanning Calorimetry ◽  
Chain Mobility ◽  
X Ray Scattering ◽  
Crystallisation Behaviour ◽  
Main Component

This study was conducted as a first step in obtaining eco-friendly fibres for medical applications using a synthesised oligomer poly(glycerol succinate) (PGSu) as an additive for synthetic poly(L-lactic acid) (PLLA) and poly (L-lactide-co-caprolactone) (PLCL). The effects of the oligomer on the structure formation, morphology, crystallisation behaviour, and mechanical properties of electrospun bicomponent fibres were investigated. Nonwovens were investigated by means of scanning electron microscopy (SEM), wide angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and mechanical testing. The molecular structure of PLLA fibres is influenced by the presence of PGSu mainly acting as an enhancer of molecular orientation. In the case of semicrystalline PLCL, chain mobility was enhanced by the presence of PGSu molecules, and the crystallinity of bicomponent fibres increased in relation to that of pure PLCL. The mechanical properties of bicomponent fibres were influenced by the level of PGSu present and the extent of crystal formation of the main component. An in vitro study conducted using L929 cells confirmed the biocompatible character of all bicomponent fibres.

Sign in / Sign up

Export Citation Format

Share Document