scholarly journals ANALISIS POSTUR KERJA PADA BAGIAN GUDANG MUAT GREY DI PT SURYA PUTRA MULIA

2022 ◽  
Vol 5 (2) ◽  
Author(s):  
Ambang Rizki Aji Nugrahanto ◽  
Maria Puspita Sari
Keyword(s):  
High Risk ◽  
Assessment Method ◽  
Physical Activities ◽  
Risk Level ◽  
Entire Body ◽  
Moderate Risk ◽  
Loading Process ◽  
Work Posture ◽  
Rapid Entire Body Assessment ◽  
A Company

PT Surya Putra Mulia is a company that produces gray (greige) using the knitting process. This research is focused on the warehouse section on the loading process finished goods. In the warehouse section there are some excessive physical activities due to activities are carried out manually. Measurement of work posture is needed to determine whether the work posture carried out by the operator is good and ergonomic. Assessment of work posture is carried out using the Rapid Entire Body Assessment (REBA) method. Based on an assessment using the REBA (Rapid Entire Body Assessment) method, it shows that the withdrawal of finished goods includes a moderate level of risk, which means that improvements are needed. The activity of loading finished goods onto trucks (figure 3) includes a moderate risk level which means that repairs are needed, while in Figure 4 it is a high risk level which means that immediate corrective action is needed. For the preparation of finished goods on trucks, it is a moderate risk level, which means that repairs are needed. So that in the process of withdrawing finished goods, proposals are given to reduce the burden being transported. Then add a tool in the process of loading finished goods to the truck in the form of a hand stacker.

scholarly journals Configuration Laptop Usage During Online Class: Effects on Posture and Discomfort Using the REBA Method

2021 ◽  
Vol 4 (2) ◽  
pp. 58-68
Author(s):  
Dian Palupi Restuputri ◽  
Rozza Badiiliana I ◽  
Fatimah Zahra Y ◽  
Nanindya Aisyah P ◽  
Fita Amalia ◽  
...  
Keyword(s):  
The Body ◽  
Risk Level ◽  
Entire Body ◽  
Body Parts ◽  
Online Class ◽  
Work Posture ◽  
Global Pandemic ◽  
Online Classrooms ◽  
Musculoskeletal Problems ◽  
Rapid Entire Body Assessment

COVID-19 has become a global pandemic, and one of the government's actions in the education sector to prevent transmission through online class activities or online classrooms has been adopted. During the pandemic, it was discovered that using computers with improper or non-ergonomic body postures during online classes might cause muscular fatigue and raise the incidence of musculoskeletal problems. Using the Rapid Entire Body Assessment (REBA) method, this study seeks to detect musculoskeletal complaints and assess the posture of UMM students when using a laptop. Because online learning lasts more than 2 hours, posture that is not in accordance with the comfort of using a laptop can lead a person to exhaust more rapidly in front of a laptop for a relatively long period, especially in the upper neck, back, and waist, which stand for 80% of the body parts. This is supported by the study of respondents using a questionnaire distribution technique that provided a REBA score of 7 and a moderate risk level, indicating that remedial action is required. After a recommended improvement with a low risk level for MSDs, a REBA score of 3 was established. Suggestions that can be considered are that it is necessary to improve sitting work posture, it is recommended to work on a table and sit in a reclining chair so that the proposed work posture improvement can be carried out.

Evaluasi Risiko Ergonomi dengan Analisis Postur Tubuh untuk Mengurangi Keluhan Musculoskeletal Disorders pada Pekerja

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Cindy Laurinda
Keyword(s):  
Main Product ◽  
Industrial Sector ◽  
Entire Body ◽  
Processing Industry ◽  
Posture Analysis ◽  
Work Posture ◽  
Body Map ◽  
Rapid Entire Body Assessment ◽  
A Company

The economy is an important thing in a country, without an economy, a country can't run. The economy of a country is certainly supported by an industrial sector, one of which is the metal and iron processing industry. Workers in the company will certainly have regulations that will regulate the workforce when doing work at the company. PT. Smart Teknik Utama Bandung is a company engaged in the processing of metal, iron, and others that produces various products derived from iron and plates. The main product of this company is Roding China. The company has a problem, namely the work posture of the employees on the production floor. Wrong work posture results in MSDs complaints among workers which reduce the quality of workers. The purpose of this research is to analyze the work posture used by the workforce is already ergonomic or not. Work posture analysis used the Nordic Body Map method, Ovako Work Posture Analysis, and Rapid Entire Body Assessment. The analysis was carried out on 12 employees from 7 workstations. With the analysis carried out, it is known that all employees have MSDs complaints which are caused by incorrect and unergonomic work postures, then suggestions are given to improve work posture to reduce MSDs complaints experienced by employees.

scholarly journals Analisis Postur Pekerja Pengelasan Di CV. XYZ dengan Metode Rapid Entire Body Assessment (REBA)

2020 ◽  
Vol 3 (2) ◽  
pp. 110
Author(s):  
Muhamad Bob Anthony
Keyword(s):  
Musculoskeletal Disorders ◽  
Risk Level ◽  
Entire Body ◽  
Work Process ◽  
Work Posture ◽  
Calculation Results ◽  
Level 3 ◽  
High Level ◽  
Rapid Entire Body Assessment ◽  
Work Table

CV. XYZ is one of the welding workshops that serves the manufacture of iron products with 4 (four) welding workers. Welding work carries risks for experiencing Musculoskeletal Disorders (MSDs) for the welding worker. This can be caused by work posture factors that often bend and squat when doing welding. Based on the calculation results, REBA score results obtained with action level 3 (three) which states that the welding work in the CV. XYZ is at a high level of risk so immediate corrective action is needed by CV. XYZ Proposed improvement of the worker's posture when welding work is a redesign of the work station or the addition of work aids based on ergonomic principles such as the procurement of a work table for the welding work process so as to reduce the risk of workers' posture to a low risk level. Keyword : Musculoskeletal Disorders, REBA, Welding, Work PostureCV. XYZ  merupakan salah satu bengkel pengelasan yang melayani pembuatan produk besi dengan 4 (empat) orang pekerja pengelasan. Pekerjaan pengelasan memiliki risiko untuk mengalami Musculoskeletal Disorders (MSDs) bagi pekerja pengelasan tersebut. Hal ini dapat disebabkan oleh faktor postur kerja yang sering membungkuk dan jongkok saat melakukan pengelasan. Berdasarkan hasil perhitungan, didapatkan hasil skor REBA dengan action level 3 (tiga) yang menyatakan bahwa pekerjaan pengelasan di CV. XYZ berada pada level risiko tinggi sehingga diperlukan tindakan perbaikan secepatnya oleh CV. XYZ. Usulan perbaikan postur tubuh pekerja saat pekerjaan pengelasan adalah perancangan ulang stasiun kerja atau penambahan alat bantu kerja berdasarkan prinsip-prinsip ergonomi seperti pengadaan meja kerja untuk proses pekerjaan pengelasan sehingga dapat mengurangi risiko postur tubuh pekerja menjadi level risiko rendah. Kata Kunci: Musculoskeletal Disorders, Pengelasan, Postur Kerja, REBA 

scholarly journals ANALISIS POTENSI RISIKO POSTUR KERJA PEMBATIK PADA UMKM MURIA BATIK KUDUS

2021 ◽  
Vol 6 (2) ◽  
pp. 90
Author(s):  
Mia Ajeng Alifiana ◽  
Akh. Sokhibi ◽  
Dina Lusianti
Keyword(s):  
Muscle Fatigue ◽  
Potential Risk ◽  
Musculoskeletal Disorder ◽  
Assessment Method ◽  
The Body ◽  
Entire Body ◽  
Risk Criteria ◽  
Work Posture ◽  
High Level ◽  
Rapid Entire Body Assessment

One of the non-object cultural heritages owned by the Indonesian people is batik. Batik is a typical Indonesian cloth spread throughout the archipelago. The process of making batik is mostly still traditional, starting from the process of making patterns on the mori cloth to the process of preparing the cloth, giving patterns, nglowong / canting, isen-isen, nembok, first coloring / medel, ngerok, mbironi stage, second coloring / greeting , nglorod and washing batik. In this batik-making process, the batik workers work continuously with a detailed type of work and the work posture of the batik is on a chair that is not designed with the dimensions of the body of the batik maker. This is if the work posture is not improved, it creates a potential risk of muscle fatigue or musculoskeletal disorder. The method used in this research is quantative. The data taken in this study is the data on the size of the batik work posture when sitting on a chair. Then the data is analyzed using the REBA (Rapid Entire Body Assessment) method using ergofellow software to determine the risk of work posture. The result of this research is the potential risk of the work position of Muria Batik Kudus UMKM batik makers with the REBA method resulting in a score of 9 (Nine), which means that they have risk criteria at a high level. The potential risk that is at a high level should immediately improve the work posture of the batik which is supported by changes in work facilities. Batik makers who have the potential for high levels of risk can result in muscle fatigue in certain parts of the body and decreased levels of productivity.

scholarly journals Analisis Risiko Kerja Pada Mesin Pirn Winder dan Two For One Pada Industri Tekstil untuk Mengurangi Risiko Kerja Repetitif

2019 ◽  
Vol 8 (2) ◽  
pp. 99-112
Author(s):  
Christie Sofyan ◽  
Elty Sarvia ◽  
Winda Halim
Keyword(s):  
Working Conditions ◽  
Textile Industry ◽  
Exposure Level ◽  
Entire Body ◽  
Body Parts ◽  
Work Posture ◽  
High Workload ◽  
Rapid Entire Body Assessment ◽  
Method Of Assessment ◽  
A Company

PT. X is a company engaged in the textile industry in Bandung. In one of the departments it owns, namely the weaving department, there are a number of machines to roll the yarn into sheets of cloth. Among these machines, there are 2 engines, namely Pirn Winder (PW) and Two For One (TFO) machines, which have almost the same function, which is rolling thread. In both machines, problems were found, namely operators working with a high workload, especially from repetition factors and poor work postures, so operators often complained of pain in their body parts. This is evident from the results of the preliminary research using the QEC method that the operator on the machine has an exposure level of more than 60% so that changes in the existing working conditions are needed. Using the method of Assessment Repetitive Task (ART) and REBA (Rapid Entire Body Assessment carried out measurement of repetitive working conditions that occur and also carried out measurements of the actual work posture. Then, the design of a tool in the form of a machine to reduce repetitions that occur must be done by the operator and improve operator work posture while working.The results were simulated using software and found out that the risk of repetition, posture has been reduced and there is a time savings of 67%.

scholarly journals FAKTOR RISIKO ERGONOMI DENGAN TERJADINYA KELUHAN MUSCULOSKELETAL DISORDERS PADA PEKERJA OVERHAUL

2018 ◽  
Vol 7 (1) ◽  
pp. 42
Author(s):  
Iin Viradiani
Keyword(s):  
Musculoskeletal Disorders ◽  
Total Population ◽  
Assessment Method ◽  
Entire Body ◽  
Descriptive Research ◽  
Strong Relation ◽  
Body Map ◽  
Cross Tabulation ◽  
Rapid Entire Body Assessment ◽  
A Company

PT PJB UPHT is a company that runs a service in maintaining a unit of power station. The job description includes overhaul that is done manually by its workers. This work that is done manually has a risk of suffering musculoskeletal. The aim of this study is to examine the relation between the risk of ergonomic’s factor with musculoskeletal disorders on overhaul workers in mechanical turbine department. This study is an observational descriptive research. The tool used to measure musculoskeletal disorders was Nordic Body Map (NBM) checklist sheet. In order to measure the work postures of workers, REBA (Rapid Entire Body Assessment) method was employed. Meanwhile, questionnaires were used to know types of work. The total population of this research was 17 workers in mechanical turbine. The data was analyzed using cross tabulation to see the relation strength. The result of this study shows that all overhaul workers in mechanical turbine suffer from musculoskeletal. It can be concluded that the risk of ergonomic’s factor in this case is type of work have strong relation to the suffering of musculoskeletal on workers.Keywords: mechanical turbine workers, musculoskeletal disorders, the risk of ergonomic’s factor

scholarly journals New Challenges Regarding the Intervention of Musculoskeletal Risk in Truck Service Garages

2021 ◽  
Vol 14 (1) ◽  
pp. 181
Author(s):  
Coral Oliver Hernández ◽  
Shimeng Li ◽  
María José Aguado Benedí ◽  
Inmaculada Mateo Rodríguez
Keyword(s):  
Musculoskeletal Disorders ◽  
Initial Assessment ◽  
Risk Level ◽  
Control Group ◽  
Entire Body ◽  
Course Of Action ◽  
Postural Load ◽  
Rapid Entire Body Assessment ◽  
Experimental Group ◽  
Postural Training

Background: The automotive industry is heavily affected by sick leaves caused by the handling of loads and using postures that produce musculoskeletal disorders. Research is needed to analyse their causes and find possible solutions to eliminate or mitigate these risks. Objective: Our objective was to analyse the level of musculoskeletal risk in the different work tasks performed by truck and bus mechanics. Our intention is also to analyse whether postural training and feedback can help reduce risk. Methods: The rapid entire body assessment (REBA) was used to assess the postures performed by 35 mechanics from eight branches throughout Spain. The participants were subsequently divided randomly into two groups (experimental group and control group). The experimental group (EG) was given training and feedback on their postures and the control group (CG) was not offered any type of intervention. A few months after the initial assessment, their postural load in the usual tasks was re-evaluated. Results: An overall average REBA Score: 10.49 ± 1.33. The main risk was found in the trunk and arms with sustained above-the-head postures. EG’s second results are significantly improved compared to the first (p = 0.026 *). Conclusions: These jobs have a high-risk level of musculoskeletal disorders. The course of action presented with postural training and feedback has shown satisfactory results. Nevertheless, given the size of the sample, further research will be needed to delve deeper into this possibility as a future line of intervention.

scholarly journals The Risk Analysis of Musculoskeletal Disorders in Pottery Making Workers in Kasongan, Bantul

2020 ◽  
Vol 9 (2) ◽  
pp. 605-611
Author(s):  
Caesar Zainur Barik ◽  
Liena Sofiana
Keyword(s):  
Sampling Techniques ◽  
Entire Body ◽  
Assessment Data ◽  
Cross Sectional ◽  
Work Activities ◽  
Work Posture ◽  
Musculoskeletal Problems ◽  
Body Map ◽  
Cross Sectional Design ◽  
Rapid Entire Body Assessment

Musculoskeletal problems are problematic in Indonesia because manual work activities such as lifting, transporting, pulling and pushing are still being done. Pottery-making workers in the Kasongan are still doing those moves traditionally such as lifting, transporting, pulling and pushing manually. The purpose of this study was to analyze the risk of MSDs in the pottery making workers in Kasongan. This research was cross sectional design. The sample amounted to 78 workers selected using accidental sampling techniques. The instruments used Nordic Body Map questionnaire and Rapid Entire Body Assessment. Data analysis was using the chi fisher test. The results showed that the variables associated were age (sig= 0.000) and variables that had no relationship were gender (sig= 0.341) and work posture (sig= 0.352). The risk factor associated with complaints of MSDs is age, so to reduce the risk of the occurrence of MSDs, they can do physical activity or stretch muscles.

scholarly journals Investigation into the Musculoskeletal Disorders Prevalence and Postural Assessment among Barbers in Sari-2016

2018 ◽  
Author(s):  
Siavash Etemadinezhad ◽  
Fateme Ranjbar ◽  
Jamshid Yazdani Charati
Keyword(s):  
Musculoskeletal Disorders ◽  
Work Experience ◽  
Assessment Method ◽  
Entire Body ◽  
Chi Square ◽  
Work Related ◽  
Body Regions ◽  
Working Postures ◽  
The Mean ◽  
Rapid Entire Body Assessment

Background and purpose: Work-related musculoskeletal disorders usually entangle back spines, neck and upper limbs. Working as a barber paves the ground for probable high prevalence of musculoskeletal disorders. This study was designed to evaluate the working postures of sari male barbers by Rapid Entire Body Assessment method and determining the prevalence of musculoskeletal disorders using NORDIC questionnaire.Methods: In the present research, 108 Sari barbers working conditions were evaluated using Rapid Entire Body Assessment (REBA) tool, and the data on the prevalence of musculoskeletal disorders was collected using Nordic questionnaire. Microsoft Excel and SPSS were then applied to analyze the data. Quantitative variables were analyzed using the descriptive statistical methods including mean and standard deviation. Chi-square test and ordinal regression have also been applied to analyze the relationship between different variables and musculoskeletal disorders' prevalence.Results: The mean age the participants was 33.11±8.2 and the mean of work experience was 12±3.7 years. According to the results of the Nordic questionnaire, during 12 past months, 78% of the studied subjects have discovered pain and discomfort at least in one of their 9 body regions. Complaints of musculoskeletal pains in the wrist were also most prevalent (72.1%), followed by the neck (49%) and elbow pains (46.2%). Through REBA Method, the highest frequency of corrective measures was at level 2 (73.9%).Conclusion: The results of the present study indicated that the evaluated subjects working postures required correction. Also, it was found essential to train barbers in what way to identify the biomechanical and ergonomic risk factors and correct working postures.

Sign in / Sign up

Export Citation Format

Share Document