scholarly journals Analytical Displacement Model of Wind Turbine Towers under Loading Conditions

2021 ◽  
Vol 3 (5) ◽  
pp. 90-100
Author(s):  
Akash Raikwar ◽  
Siraj Ahmed ◽  
Vilas Warudkar
2016 ◽  
Vol 158 ◽  
pp. 122-138 ◽  
Author(s):  
M. Feyzollahzadeh ◽  
M.J. Mahmoodi ◽  
S.M. Yadavar-Nikravesh ◽  
J. Jamali

2011 ◽  
Vol 38 (3) ◽  
pp. 293-304 ◽  
Author(s):  
Elena Nuta ◽  
Constantin Christopoulos ◽  
Jeffrey A. Packer

The seismic response of tubular steel wind turbine towers is of significant concern as they are increasingly being installed in seismic areas and design codes do not clearly address this aspect of design. The seismic hazard is hence assessed for the Canadian seismic environment using implicit finite element analysis and incremental dynamic analysis of a 1.65 MW wind turbine tower. Its behaviour under seismic excitation is evaluated, damage states are defined, and a framework is developed for determining the probability of damage of the tower at varying seismic hazard levels. Results of the implementation of this framework in two Canadian locations are presented herein, where the risk was found to be low for the seismic hazard level prescribed for buildings. However, the design of wind turbine towers is subject to change, and the design spectrum is highly uncertain. Thus, a methodology is outlined to thoroughly investigate the probability of reaching predetermined damage states under any seismic loading conditions for future considerations.


2014 ◽  
Author(s):  
Chih-Hung Chiang ◽  
Chih-Peng Yu ◽  
Keng-Tsang Hsu ◽  
Chia-Chi Cheng ◽  
Ying-Tzu Ke ◽  
...  

2020 ◽  
Vol 11 (7-2020) ◽  
pp. 66-72
Author(s):  
Liubov A. Belova ◽  

The earth-termination system for towers of ground-based wind turbines in addition to protective and functional grounding provides lightning protection grounding, which is especially important since the wind turbine is susceptible to lightning strikes. If insufficient protective measures are taken, the risk of damage to a wind turbine due to a lightning strike increases. Therefore, a well-thought-out built-in grounding system for wind turbine towers is needed, which would function as necessary and guarantee long-term mechanical strength and corrosion resistance. The configuration of grounding systems for wind turbines is discussed in IEC 61400-24, which deals with the topic of lightning protection for wind turbines, including detailed information on the choice of lightning protection measures and surge protection. It is advisable to create a lightning protection concept at the initial stage of planning a wind turbine in order to avoid later costly repairs and retrofitting.


Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5102
Author(s):  
Yu Hu ◽  
Jian Yang ◽  
Charalampos Baniotopoulos

Offshore wind energy is a rapidly maturing renewable energy technology that is poised to play an important role in future energy systems. The respective advances refer among others to the monopile foundation that is frequently used to support wind turbines in the marine environment. In the present research paper, the structural response of tall wind energy converters with various stiffening schemes is studied during the erection phase as the latter are manufactured in modules that are assembled in situ. Rings, vertical stiffeners, T-shaped stiffeners and orthogonal stiffeners are considered efficient stiffening schemes to strengthen the tower structures. The loading bearing capacity of offshore monopile wind turbine towers with the four types of stiffeners were modeled numerically by means of finite elements. Applying a nonlinear buckling analysis, the ultimate bearing capacity of wind turbine towers with four standard stiffening schemes were compared in order to obtain the optimum stiffening option.


2020 ◽  
Vol 1618 ◽  
pp. 022001
Author(s):  
M. Capaldo ◽  
J. B. Orsatelli ◽  
J. Curt ◽  
E. Julan

Sign in / Sign up

Export Citation Format

Share Document