Tubular Assembly Formation Induced by Leucine Alignment along the Hydrophobic Helix of Amphiphilic Polypeptides

The introduction of α-helical structure with a specific helix–helix interaction into an amphipathic molecule enables the determination of the molecular packing in the assembly and the morphological control of peptide assemblies. We previously reported that the amphiphilic polypeptide SL12 with a polysarcosine (PSar) hydrophilic chain and hydrophobic α-helix (l-Leu-Aib)6 involving the LxxxLxxxL sequence, which induces homo-dimerization due to the concave–convex interaction, formed a nanotube with a uniform 80 nm diameter. In this study, we investigated the importance of the LxxxLxxxL sequence for tube formation by comparing amphiphilic polypeptide SL4A4L4 with hydrophobic α-helix (l-Leu-Aib)2-(l-Ala-Aib)2-(l-Leu-Aib)2 and SL12. SL4A4L4 formed spherical vesicles and micelles. The effect of the LxxxLxxxL sequence elongation on tube formation was demonstrated by studying assemblies of PSar-b-(l-Ala-Aib)-(l-Leu-Aib)6-(l-Ala-Aib) (SA2L12A2) and PSar-b-(l-Leu-Aib)8 (SL16). SA2L12A2 formed nanotubes with a uniform 123 nm diameter, while SL16 assembled into vesicles. These results showed that LxxxLxxxL is a necessary and sufficient sequence for the self-assembly of nanotubes. Furthermore, we fabricated a double-layer nanotube by combining two kinds of nanotubes with 80 and 120 nm diameters—SL12 and SA2L12A2. When SA2L12A2 self-assembled in SL12 nanotube dispersion, SA2L12A2 initially formed a rolled sheet, the sheet then wrapped the SL12 nanotube, and a double-layer nanotube was obtained.

Influence of Carbon Nanotubes Concentration on Mechanical and Electrical Properties of Poly(styrene-co-acrylonitrile) Composite Yarns Electrospun

In this work, the influence of carbon nanotubes (CNTs) content on the mechanical and electrical properties of four series of polymeric matrix were made and their cytotoxicity on cells was evaluated to consider their use as a possible artificial muscle. For that, polymer composite yarns were electrospun using polymeric solutions at 10 wt.%. of poly(styrene-co-acrylonitrile) P(S:AN) and P(S:AN-acrylic acid) P(S:AN-AA) at several monomeric concentrations, namely 0:100, 20:80, 40:60, 50:50 (wt.%:wt.%), and 1 wt.% of AA. Carbon nanotubes (CNTs) were added to the polymeric solutions at two concentrations, 0.5 and 1.0 wt.%. PMCs yarns were collected using a blade collector. Mechanical and electrical properties of polymeric yarns indicated a dependence of CNTs content into yarns. Three areas could be found in fibers: CNTs bundles zones, distributed and aligned CNTs zones, and polymer-only zones. PMCs yarns with 0.5 wt.% CNTs concentration were found with a homogenous nanotube dispersion and axial alignment in polymeric yarn, ensuring load transfer on the polymeric matrix to CNTs, increasing the elastic modulus up to 27 MPa, and a maximum electrical current of 1.8 mA due to a good polymer–nanotube interaction.

Novel Solid Silicon Oxycarbide Unmodified Carbon Nanotube Composite Coating: Structure, Topography and Mechanical Properties

A silicon oxycarbide-carbon nanotube coating on steel was synthesized using a novel approach utilizing unmodified carbon nanotubes (CNT), silane surfactant and large monomer-based silsesquioxane sol. This enabled the creation of very stable carbon nanotube dispersion, which in turn resulted in homogenous layers obtained in a simple dip-coating process. The samples were annealed in 800 °C in argon to obtain a uniform glassy silicon oxycarbide-based composite from a silsesquioxane precursor. The layers’ morphology and nanomechanical properties were investigated using a number of methods, including infrared spectroscopy (IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), nanoindentation, Accelerated Property Mapping (XPM) and Quantitative Nanomechanical Mapping – an Atomic Force Microscopy method (QNM-AFM).

A Comparative Study on the Role of Polyvinylpyrrolidone Molecular Weight on the Functionalization of Various Carbon Nanotubes and Their Composites

Polyvinylidene fluoride (PVDF) nanocomposites filled with polyvinylpyrrolidone (PVP) wrapped carbon nanotubes were prepared via a solution casting technique. The effect of the molecular weight (polymer chain length) of the PVP on the ability to wrap different nanotube structures and its impact towards nanotube dispersibility in the polymer matrix was explored. The study was conducted with PVP of four different molecular weights and nanotubes of three different structures. The composites that exhibit an effective nanotube dispersion lead to a nanotube network that facilitates improved thermal, electrical, and mechanical properties. It was observed that nanotubes of different structures exhibit stable dispersions in the polymer matrix though PVP functionalization of different molecular weights, but the key is achieving an effective nanotube dispersion at low PVP concentrations. This is observed in MWNT and AP-SWNT based composites with PVP of low molecular weight, leading to a thermal conductivity enhancement of 147% and 53%, respectively, while for P3-SWNT based composites, PVP of high molecular weight yields an enhancement of 25% in thermal conductivity compared to the non-functionalized CNT-PVDF composite.