The voltage-mode first order universal filter using single voltage differencing differential input buffered amplifier with electronic controllability

In this research contribution, the electronically tunable first-order universal filter employing a single voltage differencing differential input buffered amplifier (VD-DIBA) (constructed from two commercially available integrated circuit (IC): the operational transconductance amplifier, IC number LT1228, and the differential voltage input buffer, IC number AD830), one capacitor and two resistors. The features of the designed first order universal filter are as follows. Three voltage-mode first-order functions, low-pass (LP), all-pass (AP) and high-pass (HP) responses are given. The natural frequency (𝜔0) of the presented configuration can be electronically adjusted by setting the DC bias current. Moreover, the voltage gain of the LP and HP filters can be controllable. The phase responses of an AP configuration can be varied from 00 to −1800 and 1800 to 00. The power supply voltages were set at ±5 𝑉. Verification of the theoretically described performances of the introduced electronically tunable universal filter was proved by the PSpice simulation and experiment.

Comparative Analysis of CNTFET Models through the Design of a Differential Amplifier

In this paper we compare simulation results on a differential pair circuit using a CNTFET model, already proposed by us, with the result obtained using Stanford model. We study the case of differential pair with differential input and single ended output as core of a 50 GHz amplifier for mm waves band. We consider the case of a CNTFET having a single CNT tube with indices (19,0) and 25 nm long. For this circuit we present result for its main parameters: gain, input impedance, output impedance, noise and distortion. Since the Stanford model includes fixed capacitance, for comparison we applied the same capacitance on our model. Since this capacitances dominate the high frequency cut, results are not much different, except for the lack of noise modelling in the Stanford model.

Inductance Simulators and Their Application to the 4th Order Elliptic Lowpass Ladder Filter Using CMOS VD-DIBAs

This paper presents inductance simulators using the voltage differencing differential input buffered amplifier (VD-DIBA) as an active building block. Three types of inductance simulators, including floating lossless inductance, series inductance-resistance, and parallel inductance-resistance simulators, are proposed, in addition to their application to the 4th order elliptic lowpass ladder filter. The simple design procedures of these inductance simulators using a circuit block diagram are also given. The proposed inductance simulators employ two VD-DIBAs and two passive elements. The complementary metal oxide semiconductor (CMOS) VD-DIBA used in this design utilizes the multiple-input metal oxide semiconductor (MOS) transistor technique in order to achieve a compact and simple structure with a minimum count of transistors. Thanks to this technique, the VD-DIBA offers high performances compared to the other CMOS structures presented in the literature. The CMOS VD-DIBAs and their applications are designed and simulated in the Cadence environment using a 0.18 µm CMOS process from Taiwan semiconductor manufacturing company (TSMC). Using a supply voltage of ±0.9 V, the linear operation of VD-DIBA is obtained over a differential input range of −0.5 V to 0.5 V. The lowpass (LP) ladder filter realized with the proposed inductance simulators shows a dynamic range (DR) of 80 dB for a total harmonic distortion (THD) of 2% at 1 kHz and a 1.8 V peak-to-peak output. In addition, the experimental results of the floating inductance simulators and their applications are obtained by using VD-DIBA constructed from the available commercial components LM13700 and AD830. The simulation results are in agreement with the experimental ones, confirming the advantages of the inductance simulators and their application.

Front-End Amplifiers for Tuning Forks in Quartz Enhanced PhotoAcoustic Spectroscopy

A study of the front-end electronics for quartz tuning forks (QTFs) employed as optoacoustic transducers in quartz-enhanced photoacoustic spectroscopy (QEPAS) sensing is reported. Voltage amplifier-based electronics is proposed as an alternative to the transimpedance amplifier commonly employed in QEPAS experiments. The possibility to use differential input/output configurations with respect to a single-ended configuration has also been investigated. Four different architectures have been realized and tested: a single-ended transimpedance amplifier, a differential output transimpedance amplifier, a differential input voltage amplifier and a fully differential voltage amplifier. All of these amplifiers were implemented in a QEPAS sensor operating in the mid-IR spectral range. Water vapor in ambient air has been selected as the target gas species for the amplifiers testing and validation. The signal-to-noise ratio (SNR) measured for the different configurations has been used to compare the performances of the proposed architectures. We demonstrated that the fully differential voltage amplifier allows for a nearly doubled SNR with respect to the typically used single-ended transimpedance amplifier.