The Potential Role of Hamstring Extensibility on Sagittal Pelvic Tilt, Sagittal Spinal Curves and Recurrent Low Back Pain in Team Sports Players: A Gender Perspective Analysis

It is assumed that mechanical restriction of hamstring tightness disrupts sagittal spine–pelvis–leg alignment and alters the lumbar–pelvic rhythm predisposing to low back pain (LBP) in athletes; however, this association is not clear. A prospective cross-sectional cohort study was conducted to determine the influence of hamstring extensibility (HE) on sagittal pelvic tilt, sagittal spinal curves, and LBP in 94 soccer and basketball players (61 man and 33 woman) with (n = 36) and without recurrent LBP (n = 58). Descriptive analysis displayed significant gender differences for HE, sagittal pelvic tilt, and lumbar curve. Differences were found between the low-HE and high-HE groups in lumbosacral angle in for the maximum trunk forward flexion (LH-MTFP). Low-HE was associated with LH-MTFP, lumbar curve and LBP in male players (p ≤ 0.023). In female players, LH-MTFP and lumbar curve were associated with low-HE (p ≤ 0.020). Low-HE predicted LH-MTFP (p = 0.000; OR = 65.6950) and LBP (p = 0.028; OR = 13.915) in male players. The decision tree analysis showed that 50.8% of the players were classified with restricted LH-MTFP, 77.4% with low-HE among male players. The 100% of male players with recurrent LBP had low-HE. The 65% of female players with low-HE had restricted LH-MTFP. Measurement of HE, lumbar curve, and LH-MTFP are important in making training decisions for to reduce the incidence of recurrent LBP in soccer and basketball players.

Effects of real-time feedback during decline walking on kinematic and kinetic gait parameters in a healthy population: study protocol for a randomized trial — up and down

Background The control of the dynamic functional leg alignment (dFLA) and biomechanical load are important joint-related aspects regarding the development of osteoarthritis (OA). Research on level walking with feedback on load-related parameters has provided innovative treatment possibilities. With regard to walking on sloped surfaces, fundamental biomechanical knowledge exists. However, comprehensive data on the agreement of kinematics and kinetics of self-paced ramp versus sloped treadmill walking is lacking. Further, deeper insights into the control of the dFLA during decline walking and the usefulness of real-time feedback are missing. Methods/design Thirty healthy participants aged between 18 and 35 years will be included. They will complete a three-dimensional gait analysis walking self-paced up and down on a 5-m ramp with a 10° inclination. Subsequently, speed-matched to ramp-up walking and self-paced 10° incline split-belt treadmill walking will be assessed. Afterwards, the participants will be observed under four different conditions of 10° declined walking on the same treadmill (a) self-paced walking, (b) self-paced walking with an internal focus of attention, (c) self-paced walking with real-time feedback, and (d) condition c speed-matched walking. The primary outcome parameter will be the frontal knee range of motion (fKROM). Secondary outcomes include the ground reaction force loading rate, spatial-temporal parameters, as well as sagittal, frontal and transversal kinematics, and kinetics for the lower extremities. Discussion The findings aim at improving the understanding of the effects of real-time feedback on the control of the dFLA and lower limb loading. Following clinical practicable methods for effective feedback devices can be developed and evaluated. Additionally, the first dataset comparing kinematic and kinetic parameters for decline and incline ramp walking versus walking on an instrumented treadmill will be available for appropriate intervention planning. Trial registration ClinicalTrials.govNCT04763850. Prospectively registered on 21 February 2021.

Comparison of Postoperative Coronal Leg Alignment in Customized Individually Made and Conventional Total Knee Arthroplasty

Neutral coronal leg alignment is known to be important for postoperative outcome in total knee arthroplasty (TKA). Customized individually made implants (CIM) instrumented with patient-specific cutting guides are an innovation aiming to increase the precision and reliability of implant positioning and reconstruction of leg alignment. We aimed to compare reconstruction of the hip–knee–ankle angle (HKA) of the novel CIM system iTotal™ CR G2 (ConforMIS Inc.) to a matched cohort of the off-the-shelf (OTS) knee replacement system Vanguard™ CR (Zimmer Biomet). Retrospective analysis of postoperative coronal full-leg weight-bearing radiographs of 562 TKA (283 CIM TKA, 279 OTS TKA) was conducted. Via a medical planning software, HKA and rotation of the leg were measured in postoperative radiographs. HKA was then adjusted for rotational error, and 180° ± 3° varus/valgus was defined as the target zone HKA. Corrected postoperative HKA in the CIM group was 179.0° ± 2.8° and 179.2° ± 3.1° in the OTS group (p = 0.34). The rate of outliers, outside of the ±3° target zone, was equal in both groups (32.9%). Our analysis showed that TKA using patient-specific cutting guides and implants and OTS TKA implanted with conventional instrumentation resulted in equally satisfying restoration of the coronal leg alignment with less scattering in the CIM group.

Towards planning of osteotomy around the knee with quantitative inclusion of the adduction moment: a biomechanical approach

Purpose Despite practised for decades, the planning of osteotomy around the knee, commonly using the Mikulicz-Line, is only empirically based, clinical outcome inconsistent and the target angle still controversial. A better target than the angle of frontal-plane static leg alignment might be the external frontal-plane lever arm (EFL) of the knee adduction moment. Hypothetically assessable from frontal-plane-radiograph skeleton dimensions, it might depend on the leg-alignment angle, the hip-centre-to-hip-centre distance, the femur- and tibia-length. Methods The target EFL to achieve a medial compartment force ratio of 50% during level-walking was identified by relating in-vivo-measurement data of knee-internal loads from nine subjects with instrumented prostheses to the same subjects’ EFLs computed from frontal-plane skeleton dimensions. Adduction moments derived from these calculated EFLs were compared to the subjects’ adduction moments measured during gait analysis. Results Highly significant relationships (0.88 ≤ R2 ≤ 0.90) were found for both the peak adduction moment measured during gait analysis and the medial compartment force ratio measured in vivo to EFL calculated from frontal-plane skeleton dimensions. Both correlations exceed the respective correlations with the leg alignment angle, EFL even predicts the adduction moment’s first peak. The guideline EFL for planning osteotomy was identified to 0.349 times the epicondyle distance, hence deducing formulas for individualized target angles and Mikulicz-Line positions based on full-leg radiograph skeleton dimensions. Applied to realistic skeleton geometries, widespread results explain the inconsistency regarding correction recommendations, whereas results for average geometries exactly meet the most-consented “Fujisawa-Point”. Conclusion Osteotomy outcome might be improved by planning re-alignment based on the provided formulas exploiting full-leg-radiograph skeleton dimensions.

Kinematic Analysis of the Coupling Between Calcaneal Eversion and Ankle Dorsiflexion in a Contemporary Dancer’s Demi-Plié

BACKGROUND: Dancing requires a high range of motion in the foot as well as a good shock-absorbing system formed by the foot and ankle joints. Although there is a broad consensus in dance that excessive calcaneal eversion can cause injury and should be avoided, calcaneal eversion is discussed controversially in the dance literature. An increased research focus on the biomechanics of dance, particularly research pertaining to the foot and ankle joints, might help to resolve this controversy. OBJECTIVES: The study’s main purpose was to generate hitherto lacking kinematic data of calcaneal eversion in a dancer’s demi-plié. METHODS: Thirty-two contemporary dancers performed three trials in two different conditions: demi-plié in parallel and in turned-out positions. The motion capture system FASTRAK was used to measure calcaneal eversion and foot and lower leg alignment during demi-plié. RESULTS: Maximal calcaneal eversion in turned-out demi-pliés was 3.36°±4° and total range of motion (i.e., maximal minus minimal angle) of calcaneal eversion was 3.73°±1.42°, where the large standard deviations indicate substantial variability across participants. Calcaneal eversion was significantly different between turned-out (3.36°±4°) and parallel (1.17°±4.06°) demi-pliés, as was the alignment of the lower leg and foot, where the lower leg tracked more medially relative to the foot during turned-out pliés. Crucially, both the magnitude of calcaneal eversion and its temporal coupling with ankle dorsiflexion were highly variable across participants. CONCLUSIONS: Average calcaneal eversion is a poor indicator of the role calcaneal eversion plays in the demi-plié of contemporary dancers. Rather, the temporal coupling between calcaneal eversion and ankle dorsiflexion needs to be considered.

Is Standing Coronal Long-Leg Alignment View Effective in Predicting the Extent of Medial Soft Tissue Release in Varus Deformity during Total Knee Arthroplasty?

The aim of this study was to assess the predictive value of the femoral intermechanical-anatomical angle (IMA), mechanical lateral distal femoral angle (mLDFA), medial proximal tibia angle (MPTA), femorotibial or varus angle (VA), and joint line convergence angle (CA) in predicting the stage of the medial collateral ligament (MCL) during total knee arthroplasty (TKA) of varus knee. We evaluated 229 patients with osteoarthritic varus knee who underwent primary TKA, prospectively. They were categorized in three groups based on the extent of medial soft tissue release that performed during TKA Group 1, osteophytes removal and release of the deep MCL and posteromedial capsule (stage 1); Group 2, the release of the semimembranosus (stage 2); and Group 3, release of the superficial MCL (stage 3) and/or the pes anserinus (stage 4). We evaluated the preoperative standing coronal hip-knee-ankle alignment view to assessing the possible correlations between the knee angles and extent of soft tissue release. A significant difference was observed between the three groups in terms of preoperative VA, CA, and MPTA by using the Kruskal–Wallis test. The extent of medial release increased with increasing VA and CA as well as decreasing MPTA in preoperative long-leg standing radiographs. Finally, a patient with a preoperative VA larger than 19, CA larger than 6, or MPTA smaller than 81 would need a stage 3 or 4 of MCL release. The overall results showed that the VA and MPTA could be useful in predicting the extent of medial soft tissue release during TKA of varus knee.

Determination of Leg Alignment in Hip Osteoarthritis Patients with the EOS® System and the Effect on External Joint Moments during Gait

The present study considered the entire leg alignment and links static parameters to the external joint moments during gait in patients with hip osteoarthritis. Eighteen patients with unilateral hip osteoarthritis were measured using the EOS® system. Clinical leg alignment and femoral parameters were extracted from the 3D reconstruction of the EOS images. A 3D gait analysis was performed and external knee and hip adduction moments were computed and compared to 18 healthy controls in the same age group. The knee adduction moments of the involved leg were strongly correlated to the femoral offset and the varus/valgus alignment. These parameters alone explained over 50% of the variance in the knee adduction moments. Adding the pelvic drop of the contralateral side increased the model of femoral offset and varus/valgus alignment and explained 78% of the knee adduction moment during the first half of the stance phase. The hip adduction moments were best associated with the hip kinematics and not the leg alignment.

CAOS Augmented Mechanical Instrumentation Provides Versatility and Improved Accuracy During Total Knee Arthroplasty

This study assessed the impact of adding computer-assisted orthopedic surgery (CAOS) augmentation to conventional mechanical instrumentation with regard to the enablement of both mechanical and natural alignment surgical philosophies and accuracy of postoperative alignment for total knee arthroplasty (TKA). Fifty CAOS augmented TKA cases were compared to 101 conventional cases. Data on surgical time, length of stay, and postoperative weight-bearing long leg alignment were collected. The results reported no significant impact on surgical time with incorporation of CAOS augmentation into the conventional surgical workflow, as well as a shorter length of stay and substantial decrease in alignment outliers compared to the conventional TKA cases. The study revealed the advantages of CAOS augmentation in providing a non-disruptive tool to enhance surgical accuracy and offer versatility in accommodating different surgical philosophies during TKA.