Enigmatic clusters of sandstone boulders on plateaus of the Stołowe Mountains (Sudetes, south-west Poland) – their geoheritage and geotouristic value

Among sites of geomorphological interest in the tableland of the Stołowe Mountains, consisting of clastic sedimentary rocks of Late Cretaceous age, are enigmatic occurrences and clusters of sandstone boulders within plateau levels that are underlain by mudstones and marls. These boulders are allochthonous, having been derived from the quartz sandstone beds that support the upper plateau level and stratigraphically are in excess of 50 m above the altitudinal position of the boulders. Topographic conditions preclude long-distance transport from the escarpment slopes; boulders are hypothesised to be the last remnants of completely degraded outliers (mesas) of the upper plateau. Their present-day altitudinal position is explained by passive ‘settling’ following disintegration of caprock and denudation of the underlying weaker rocks. Two localities are here presented in detail, Łężyckie Skałki and Pustelnik, along with adjacent boulder trains in the valleys incised into the plateau. It is argued that both localities have considerable geoheritage value and both play the role of geosites, although on-site facilities are so far limited. However, the complex history of boulders sets a series of challenges for successful geo-interpretation.

Effects of Magnitude of Leading Stimulus on Prepulse Inhibition of Auditory Evoked Cerebral Responses: An Exploratory Study

An abrupt change in a sound feature (test stimulus) elicits a specific cerebral response, which is attenuated by a weaker sound feature change (prepulse) preceding the test stimulus. As an exploratory study, we investigated whether and how the magnitude of the change of the prepulse affects the degree of prepulse inhibition (PPI). Sound stimuli were 650 ms trains of clicks at 100 Hz. The test stimulus was an abrupt sound pressure increase (by 10 dB) in the click train. Three consecutive clicks, weaker (−5 dB, −10 dB, −30 dB, or gap) than the baseline, at 30, 40, and 50 ms before the test stimulus, were used as prepulses. Magnetic responses to the ten types of stimuli (test stimulus alone, control, four types of tests with prepulses, and four types of prepulses alone) were recorded in 10 healthy subjects. The change-related N1m component, peaking at approximately 130 ms, and its PPI were investigated. The degree of PPI caused by the −5 dB prepulse was significantly weaker than that caused by other prepulses. The degree of PPI caused by further decreases in prepulse magnitude showed a plateau level between the −10 dB and gap prepulses. The results suggest that there is a physiologically significant range of sensory changes for PPI, which plays a role in the change detection for survival.

1H-NMR Profiling Shows as Specific Constituents Strongly Affect the International EVOO Blends Characteristics: The Case of the Italian Oil

Considering the growing number of extra virgin olive oil (EVOO) producers in the world, knowing the influence of olive oils with different geographical origins on the characteristics of the final blend becomes an interesting goal. The present work is focused on commercial organic EVOO blends obtained by mixing multiple oils from different geographical origins. These blends have been studied by 1H-NMR spectroscopy supported by multivariate statistical analysis. Specific characteristics of commercial organic EVOO blends originated by mixing oils from Italy, Tunisia, Portugal, Spain, and Greece were found to be associated with the increasing content of the Italian component. A linear progression of the metabolic profile defined characteristics for the analysed samples—up to a plateau level—was found in relation to the content of the main constituent of the Italian oil, the monocultivar Coratina. The Italian constituent percentage appears to be correlated with the fatty acids (oleic) and the polyphenols (tyrosol, hydroxytyrosol, and derivatives) content as major and minor components respectively. These results, which highlight important economic aspects, also show the utility of 1H-NMR associated with chemometric analysis as a powerful tool in this field. Mixing oils of different national origins, to obtain blends with specific characteristics, could be profitably controlled by this methodology.

Source Parameters of Moderate-To-Large Chinese Earthquakes From the Time Evolution of P-Wave Peak Displacement on Strong Motion Recordings

In this work we propose and apply a straightforward methodology for the automatic characterization of the extended earthquake source, based on the progressive measurement of the P-wave displacement amplitude at the available stations deployed around the source. Specifically, we averaged the P-wave peak displacement measurements among all the available stations and corrected the observed amplitude for distance attenuation effect to build the logarithm of amplitude vs. time function, named LPDT curve. The curves have an exponential growth shape, with an initial increase and a final plateau level. By analyzing and modelling the LPDT curves, the information about earthquake rupture process and earthquake magnitude can be obtained. We applied this method to the Chinese strong motion data from 2007 to 2015 with Ms ranging between 4 and 8. We used a refined model to reproduce the shape of the curves and different source models based on magnitude to infer the source-related parameters for the study dataset. Our study shows that the plateau level of LPDT curves has a clear scaling with magnitude, with no saturation effect for large events. By assuming a rupture velocity of 0.9 Vs, we found a consistent self-similar, constant stress drop scaling law for earthquakes in China with stress drop mainly distributed at a lower level (0.2 MPa) and a higher level (3.7 MPa). The derived relation between the magnitude and rupture length may be feasible for real-time applications of Earthquake Early Warning systems.

Is adipose tissue suitable for detection of (synthetic) cannabinoids? A comparative study analyzing antemortem and postmortem specimens following pulmonary administration of JWH-210, RCS-4, as well as ∆9-tetrahydrocannabinol to pigs

Examining fatal poisonings, chronic exposure may be reflected by the concentration in tissues known for long-term storage of drugs. Δ9-tetrahydrocannabinol (THC) persists in adipose tissue (AT), but sparse data on synthetic cannabinoids (SC) are available. Thus, a controlled pig study evaluating antemortem (AM) disposition and postmortem (PM) concentration changes of the SC 4-ethylnaphthalene-1-yl-(1-pentylindole-3-yl)methanone (JWH-210) and 2-(4-methoxyphenyl)-1-(1-pentyl-indole-3-yl)methanone (RCS-4) as well as THC in AT was performed. The drugs were administered pulmonarily (200 µg/kg body weight) to twelve pigs. Subcutaneous (s.c.) AT specimens were collected after 15 and 30 min and then hourly up to 8 h. At the end, pigs were sacrificed and s.c., perirenal, and dorsal AT specimens were collected. The carcasses were stored at room temperature (RT; n = 6) or 4 °C (n = 6) and specimens were collected after 24, 48, and 72 h. After homogenization in acetonitrile and standard addition, LC–MS/MS was performed. Maximum concentrations were reached 0.5–2 h after administration amounting to 21 ± 13 ng/g (JWH-210), 24 ± 13 ng/g (RCS-4), and 22 ± 20 ng/g (THC) and stayed at a plateau level. Regarding the metabolites, very low concentrations of N-hydroxypentyl-RCS-4 (HO-RCS-4) were detected from 0.5 to 8 h. PM concentrations of parent compounds did not change significantly (p > 0.05) over time under both storage conditions. Concentrations of HO-RCS-4 significantly (p < 0.05) increased in perirenal AT during storage at RT. These results suggest a rapid distribution and persistence in s.c. AT. Furthermore, AT might be resistant to PM redistribution of parent compounds. However, significant PM increases of metabolite concentrations might be considered in perirenal AT.

Comparative study of the circumferential and volumetric analysis between conventional casting and three-dimensional scanning methods for transtibial socket: A preliminary study

Transtibial prosthetic sockets can be fabricated either by the conventional way, which involve using plaster of Paris bandages for casting. This will include modifications through hand, scanning and digital imaging of software. The aim of this study is to determine the circumferential profiles and conduct a volumetric analysis of a conventional socket that has fabrication using biosculptor technology. In doing this, a male transtibial amputee, age 28 years old with stable health condition was studied, where circumferential measurements were taken at intervals of 1 cm from the distal end of the residual limb to the medial tibial plateau level. Furthermore, the interior volume of both sockets and residuum were determined directly using water displacement method. A comparative value for the calculation of volume was also carried out using engineering mathematical equations. From these measurements, a total surface bearing transtibial sockets was fabricated to compare the changes of circumferential values of both sockets. The finding shows a percentage of the difference between the volume of the residual limb and conventional sockets to be 6.09%, whereas the biosculptor fabrication socket was 7.84% using the water displacement method. A comparison of circumferential profiles and volumetric analysis findings on the contrary showed that socket fabricated using the biosculptor technology is interchangeable with the conventional socket with more advantages, where biosculptor technology produces cheaper sockets and faster process with digital function in the procedure, unlike the conventional manual technique.

Onion-like glycodendrimersomes from sequence-defined Janus glycodendrimers and influence of architecture on reactivity to a lectin

A library of eight amphiphilic Janus glycodendrimers (GDs) with d-mannose (Man) headgroups, a known routing signal for lectin-mediated transport processes, was constructed via an iterative modular methodology. Sequence-defined variations of the Janus GD modulate the surface density and sequence of Man after self-assembly into multilamellar glycodendrimersomes (GDSs). The spatial mode of Man presentation is decisive for formation of either unilamellar or onion-like GDS vesicles. Man presentation and Janus GD concentration determine GDS size and number of bilayers. Beyond vesicle architecture, Man topological display affects kinetics and plateau level of GDS aggregation by a tetravalent model lectin: the leguminous agglutinin Con A, which is structurally related to endogenous cargo transporters. The agglutination process was rapid, efficient, and readily reversible for onion-like GDSs, demonstrating their value as versatile tools to explore the nature of physiologically relevant glycan/lectin pairing.

Multiple Modes of Amplification of Synaptic Inhibition to Motoneurons by Persistent Inward Currents

The ability of inhibitory synaptic inputs to dampen the excitability of motoneurons is augmented when persistent inward currents (PICs) are activated. This amplification could be due to an increase in the driving potential of inhibitory synapses or the deactivation of the channels underlying PICs. Our goal was to determine which mechanism leads to the amplification of inhibitory inputs by PICs. To reach this goal, we measured inhibitory postsynaptic currents (IPSCs) in decerebrate cats during somatic voltage-clamp steps. These IPSCs were generated by tonic activation of Renshaw cells. The IPSCs exhibited a rapid rise and a slower decay to a plateau level. Activation of PICs always led to an increase in the peak of the IPSC, but the amount of decay after the peak of the IPSC was inversely related to the size of the IPSC. These results were replicated in simulations based on compartmental models of motoneurons incorporating distributions of Renshaw cell synapses based on anatomical observations, and L-type calcium channels distributed as 100-μm-long hot spots centered 100 to 400 μm away from the soma. For smaller IPSCs, amplification by PICs was due to an increase in the driving force of the inhibitory synaptic current. For larger IPSCs, amplification was caused by deactivation of the channels underlying PICs leading to a lesser decay of the IPSCs. As a result of this change in the time course of the IPSC, deactivation of the channels underlying PICs leads to a greater amplification of the total inhibitory synaptic current.

Preparatory Gain Modulation of Visuomotor Transmission for Smooth Pursuit Eye Movements in Monkeys

It has been reported that the visuomotor processing underlying the initiation of smooth pursuit eye movement is modulated in relation to the recent experience of eye movements: the initial pursuit eye velocity is larger after experiencing repeated pursuits than saccades. To assess which parameters of the previously executed pursuits play an essential role in modulating the gain of visuomotor transmission, we recorded the ocular responses of monkeys to a brief perturbing motion of the tracking target injected before the start of the eye movements. First, we compared the perturbation responses among the blocks in which the duration of executing pursuit was varied. We found that the response amplitude increased with the increase of the pursuit duration and it reached a plateau level at 100–200 ms of the duration. Second, a comparison of the perturbation responses in the blocks in which target velocity was different showed a gradual increase of the response as a function of the required pursuit velocity. Third, when the animals repeatedly performed pursuits, the response amplitude gradually increased with increasing interval between the appearance of the target and the onset of perturbation. On the other hand, such an increase was not observed when the animals repeatedly performed saccades. These results suggest that before initiating eye movements, the pursuit system modulates the gain of visuomotor transmission so as to be closely related to the properties of the repeatedly experienced eye movements and this gain modulation is triggered by the target’s appearance.