Reporting characteristics of systematic review abstracts published in the proceedings of the SBPqO meeting

Aim: This study aimed to assess the reporting characteristics of systematic review abstracts published in the proceedings of the Sociedade Brasileira de Pesquisa Odontológica (SBPqO) meeting. Methods: We selected abstracts published in the SBPqO meeting proceedings of 2019 and 2020, mentioning that a systematic review was conducted in the title, objective or methods sections. One researcher performed the screening and the data extraction after a pilot test training. The following data were extracted: affiliation of the primary author, dental specialization, the term “systematic review” mentioned in the title, reporting of the objective, reporting of eligibility criteria, reporting of information sources, reporting of the number of included studies and if a meta-analysis was performed. A descriptive analysis of the data was performed with data summarized as frequencies. Results: We included 235 abstracts. A total of 20 studies were from the Universidade de Uberlândia (8.5%), and the main specialization was Restorative and Esthetic Dentistry, with 47 studies (20%). Most of the studies mentioned the term “systematic review” in the title (n=219; 93.2%) and reported the objective (n=231; 98.3%). A great majority of studies did not report the eligibility criteria (n=97; 41.3%) or it was classified as unclear (n=96; 40.8%). The great majority of studies only reported the databases searched (n=103; 43.8%) or databases and date of search (n=74; 31.5%). Most of the studies reported the number of included studies (n=204; 86.8%). Conclusion: Based on this study, the reporting characteristics of systematic review abstracts published in the proceedings of the SBPqO meeting are satisfactory. However, there is room for improvement.

Dual-cured adhesive system improves adhesive properties of dentin cavities restored with a bulk-fill resin composite

Aim: To evaluate the impact of a dual-cured adhesive system on the in situ degree of conversion (DC), bond strength (BS) and failure mode (FM) of adhesive interfaces in dentin cavities restored with a bulk-fill resin composite. Methods: 4-mm-deep dentin cavities with a 3.1 C-factor were created in 68 bovine incisors (n = 17 per group). The lightcured (Scotchbond™ Universal) or the dual-cured (Adper™ Scotchbond™ Multi-purpose Plus) adhesive system was applied to the cavities, which were then restored with a bulkfill resin composite (Filtek™ Bulk Fill). In situ DC analysis was performed by means of micro Raman spectroscopy at the top and bottom interfaces. Push-out BS was measured in a universal testing machine after 24-h or 6-month water storage. FM was determined with a stereomicroscope. Data of in situ DC and BS were analyzed by two-way analysis of variance (ANOVA) and Tukey test (p<0.05), while the FM was analyzed descriptively. Results: The groups that received the dual-cured adhesive system showed statistically higher in situ DC and BS than those that received the light-cured adhesive system. Cohesive failure mode was the most frequent in all conditions. Conclusion: In situ DC and BS were influenced by the curing strategies of the adhesive systems with better performance of the dual-cured material.

Validity and reliability of palatal rugae morphometric assessment with 3D laser scanned models

Aim: To assess the reliability and validity of morphometric features on 3D digital models produced by scanning maxillary dental casts of Malaysian Malay subjects. Methods: Dental casts of 20 subjects were scanned using a 3D laser scanner (Next Engine Inc., Santa Monica, California, USA). The palatal rugae morphometric features were assessed on the resulting 3D models using 3-Matic Research 9.0 software (Materialise NV, Heverlee, Belgium). The assessments were repeated by the first and second authors to assess the intra- and interexaminer reliability, respectively. Rugae morphometric features were also evaluated on the conventional plaster models to assess the validity of the 3D method. Results: Kappa values of the validity ranged from 0.807 to 0.922 for rugae shape, size category and direction. The intraclass correlation coefficient (ICC) for rugae number validity was 0.979. For intra-examiner reliability, kappa values ranged from 0.716-1.000 for rugae shape, size category and direction. The ICC for rugae number intra-examiner reliability was 0.949. Kappa values of interexaminer reliability for rugae shape, size category and direction were 0.723-885, while the ICC of rugae number was 0.896. Conclusion: Palatal rugae analyses on 3D digital models scanned by the 3D Next Engine laser scanner using 3-Matic Research 9.0 software are valid and reliable.

Clinical performance of resin composite restorations placed by dental students

Aim: A retrospective, cross-sectional study was carried out to evaluate the performance of resin composite restorations placed by undergraduate dental students with 1 to 15 years of placement based on dental records. Methods: Four calibrated operators evaluated 498 restorations (anterior and posterior) of 120 patients according to Ryge’s validated criteria (USPHS). Results: The criteria that showed the smallest changes between the types of failures were color matching, marginal discoloration and surface texture. Regarding the longevity, the surface texture showed an increase in the frequency of failures from the second time interval (3.1 to 6 years). Higher prevalence of failure was found in class II and III restorations, with secondary caries being the main reason. No significant differences were found for anatomic form, marginal adaptation, and color matching. Class V restorations showed a higher fracture rate with total displacement of the restoration, with no increase in the frequency of fracture over time. Conclusion: High rate of restoration failure was observed, possibly due to the lack of experience and skills of the students. This outcome highlight the need for continuous revision and improvements of teaching practice regarding the development of clinical competences and skills by dental students.

Evaluation of an open access generic 3D software for Orthodontic diagnosis and treatment planning

Aim: To evaluate the accuracy and the validity of orthodontic diagnostic measurements, as well as virtual tooth transformations using a generic open access 3D software compared to OrthoAnalyzer (3Shape) software; which was previously tested and proven for accuracy. Methods: 40 maxillary and mandibular single arch study models were duplicated and scanned using 3Shape laser scanner. The files were imported into the generic and OrthoAnalyzer software programs; where linear measurements were taken twice to investigate the accuracy of the program. To test the accuracy of the program format, they were printed, rescanned and imported into OrthAnalyzer. Finally, to investigate the accuracy of editing capabilities, linear and angular transformation procedures were performed, superimposed and printed to be rescanned and imported to OrthoAnalyzer for comparison. Results: There was no statistically significant difference between the two groups using the two software programs regarding the accuracy of the linear measurements (p>0.05). There was no statistically significant difference between the different formats among all the measurements, (p>0.05). The editing capabilities also showed no statistically significant difference (p>0.05). Conclusion: The generic 3D software (Meshmixer) was valid and accurate in cast measurements and linear and angular editing procedures. It can be used for orthodontic diagnosis and treatment planning without added costs.

Effect of intracanal diode laser irradiation on fracture resistance of roots restored with CAD/CAM posts

Aim: To evaluate the fracture resistance of roots restored with CAD/CAM-fabricated posts, receiving or not intracanal laser treatment, compared with glass fiber posts under mechanical cycling. Methods: Twenty-seven endodontically treated, single-rooted teeth were divided into 3 groups: group 1 (control), prefabricated glass fiber posts relined with resin composite; group 2, CAD/CAM-fabricated intraradicular posts using Resin Nano Ceramic (RNC) blocks; and group 3, CAD/CAM-fabricated intraradicular posts using RNC blocks in canals irradiated with a 940-nm diode laser (100 mJ, 300-um optic fiber, coronal-apical and apical-coronal helical movements, speed of 2 mm/second, 4 times each canal). After cementation of the coping, cyclic loading was applied at an angle of 135° to the long axis of the root, with a pulse load of 130 N, frequency of 2.2 Hz, and 150,000 pulses on the crown at a point located 2 mm below the incisal edge on the lingual aspect of the specimen. Every 50,000 cycles, the specimens were evaluated for root fracture occurring below or above the simulated bone crest. Results were analyzed by one-way ANOVA followed by Tukey’s test (p<0.05). Results: Group 1 was the least resistant, while groups 2 and 3 were the most resistant. Group 1 differed significantly from groups 2 and 3 (p<0.01), but there was no difference between groups 2 and 3 (p<0.01). Conclusion: Treatment of the intracanal surface with diode laser had no influence on fracture resistance of roots restored with CAD/CAM-fabricated posts, but a longer cycling time is required to evaluate the real benefits of diode laser irradiation.

Color and translucency stability of CAD/CAM restorative materials

Aim: This study assessed the color and translucency stability of a polymer infiltrated ceramic network (PICN) and compared it with a resin composite (RC) and a feldspathic ceramic (FEL). Methods: Disc-shaped samples of a PICN (Vita Enamic), a feldspathic ceramic (Vitablocks Mark II), and a resin composite (Brava block) were prepared from CAD/CAM blocks. PICN and RC surfaces were finished with a sequence of polishing discs and diamond paste. FEL samples received a glaze layer. The samples were subjected to 30-min immersions in red wine twice a day for 30 days. CIEL*a*b* coordinates were assessed with a spectrophotometer at baseline and after 15 and 30 days of immersion. Color alteration (ΔE00) and translucency parameter (TP00) were calculated with CIEDE2000. Average roughness was measured before the staining procedures. Color difference and translucency data were analyzed with repeated-measures ANOVA and Tukey’s tests. Roughness was analyzed with the Kruskal-Wallis test. Results: Roughness was similar among the experimental groups. All materials had their color alteration significantly increased from 15 to 30 days of staining. PICN reached an intermediate ΔE00 between FEL and RC at 15 days. PICN revealed a color alteration as high as the composite after 30 days. No statistical difference was observed regarding translucency. Conclusion: PICN was not as color stable as the feldspathic ceramic at the end of the study. Its color alteration was comparable to the resin composite when exposed to red wine. However, the translucency of the tested materials was stable throughout the 30-day staining.

Short-term effect of adhesive system on clinical performance of bulk fill composite

Aim: Although bulk fill composites have been widely used as restorative material, there is no consensus regarding the best clinical protocol in terms of composite technique and adhesive system. Therefore, this clinical trial evaluated the clinical performance of bulk fill composites for class I restorations under different protocols. Methods: A randomized clinical trial including 155 class I restorations was conducted using different adhesive systems: conventional technique (phosphoric acid + conventional three-step adhesive system) (Group 1, 2 and 3); or self-etching adhesive system (Groups 4, 5 and 6). Control groups 1 and 4 were restored with conventional composite; groups 2 and 5 with low viscosity bulk fill and conventional composite as occlusal coverage; groups 3 and 6 with high viscosity bulk fill. The FDI criteria was used for clinical evaluation at baseline and after 6 months. Results: All groups showed good clinical performance. At baseline, the adhesive system did not affect postoperative hypersensitivity. After 6 months, group 5 showed a significant reduction in color and translucency; group 6 a reduction in terms of anatomical form and for postoperative sensitivity and an improvement in patient satisfaction (p<0.05). Considering the same restorative technique, the use of the self-etching adhesive system showed a significant decrease in color and translucency (p<0.05). Conclusion: All groups showed favorable clinical performance, and promising results were found for the conventional adhesive system and high viscosity bulk fill protocol.

Response of dental pulp capped with calcium-silicate based material, calcium hydroxide and adhesive resin in rabbit teeth

Direct pulp capping induces a local inflammatory process. Several biomaterials have been used for this procedure. The aim of this study was to compare the dentinal bridge thickness using three different pulp capping biomaterials with the conventional technique (high speed diamond bur) or Er-Yag laser, 1 month after pulp effraction. Materials and Methods: Forty two Class V cavities were prepared on the buccal surface of 4 maxillary incisors and 2 mandibular incisors of New Zealand rabbits. Specimens were divided into 6 treatment groups. Teeth were treated with: In Group 1: Er-Yag laser and Biodentine® (Septodont), in Group 2: Er: Yag laser and calcium hydroxide (Dycal® Dentsply), in Group 3: Er: Yag laser and adhesive system (Prime& Bond® NT Dentsply), in Group 4: high speed diamond bur and Biodentine® (Septodont), in Group 5: high speed diamond bur and calcium hydroxide (Dycal® Dentsply), and in Group 6: high speed diamond bur and adhesive system (Prime& Bond® NT Dentsply). The preparation was done with copious irrigation. The animals were sacrificed at 30 days and the teeth were extracted and prepared for histological analysis. Results: In the group of « laser Er-Yag », iatrogenic pulpal wounds treated with Biodentine® were covered with a thick hard tissue barrier after 1 month. The difference was not significant with the groups of Dycal® used with Er: Yag laser and high speed diamond bur. Prime& Bond® NT Dentsply specimens showed a thin dentinal bridge layer. Conclusion: At 1 month, Er-Yag laser proved to be useful with Biodentine® for direct pulp capping procedures.

Attitudes of dental students towards paediatric dental behaviour guidance

Aim: To compare the pre-clinical and clinical students` perceptions about the non-pharmacological behaviour management techniques in paediatric dentistry and to investigate the influence of the dental curriculum on the students` knowledge regarding this issue. Methods: A total of 283 students from the IV-and X-semester completed a questionnaire, consisted of 12 statements, describing the nonpharmacological behaviour management techniques for the treatment of paediatric dental patients. The acceptability rate was evaluated with a Likert scale ranging from 1 to 5. Results: The students from all courses demonstrated high acceptance for Reinforcement and Desensitization techniques and low for the Negative reinforcement and Physical restraint. The comparison between the perceptions of the pre-clinical and clinical students demonstrated a statistically significant increase in the acceptance of the physical restraint, along with Nonverbal communication, Modelling and Parental presence/absence (p<0.05). Conclusion: The results provide information about the students’ knowledge and skills in behaviour management techniques together with some insights about how the educational process can modify the students` perceptions and views in dealing with paediatric dental patients.