Indonesian Journal of Forestry Research
Latest Publications


TOTAL DOCUMENTS

249
(FIVE YEARS 42)

H-INDEX

5
(FIVE YEARS 1)

Published By "Research, Development And Innovation Agency, Ministry Of Environment And Forestry"

2406-8195, 2355-7079

2021 ◽  
Vol 8 (2) ◽  
pp. 127-134
Author(s):  
Trisna Priadi ◽  
Nurul Chotimah ◽  
Agus Ismanto

Pond apple (Annona glabra L.) belongs to the family of Annonaceae. The seed of A. glabra contains bioactive substance that is toxic to some organisms, however the effectiveness to control wood degrading termites has not yet been scientifically reported.  This research analyzes the efficacy of A. glabra seed extract to wood degrading termites. Seed extraction was conducted using n-hexane and ethyl acetate. The paper disc test showed that the extract of A. glabra is toxic to Cryptotermes cynocephalus (dry-wood termites) and Coptotermes curvignathus (subterranean termites). The higher extract concentration (up to 63%) resulted in a higher termite mortality (up to 100%) and lower weight loss of paper sample (less than 1%).  Ethyl acetate extract of A. glabra seeds has a better toxicity effect than n-hexane extract against dry wood termites and subterranean termites.


2021 ◽  
Vol 8 (2) ◽  
pp. 229-239
Author(s):  
Aditya Hani

Malapari (Pongamia pinnata) is a potential plant for biodiesel and has the ability to grow on marginal land. Malapari cultivation has not yet been carried out due to low economic value. Agroforestry crop patterns are expected to provide intermediate results so that people would be interested in planting malapari. Planting on coastal land requires the right technology to produce optimal growth. This study aims to determine the effect of malapari cropping patterns and evaluate biological fertilizer application in the seedling phase after planting in the field. The research uses a split plot design (Split Plot Design) with the main factors that are the pattern of malapari planting and sub-plots that are the type of application of biofertilizer. The results obtained from the study showed that the interaction of cropping pattern treatment and biofertilizer application did not give significant growth to malapari; the combination of the application of organic manure, Trichoderma spp and mycorrhiza bio-fertilizers in the nursery yielded the largest malapari diameter growth after planting in the field at the age of 3 years.


2021 ◽  
Vol 8 (2) ◽  
pp. 173-186
Author(s):  
Christine Wulandari ◽  
Pitojo Budiono ◽  
Dian Iswandaru

A restoration program is needed by West Lampung District, because  80% of the protected forests in this district have been damaged. Bina Wana (BW) Community Forest Group (CFG) has been successful in carrying out restoration program of 465 ha of Bukit Rigis protected forest. It resulted in an 80% increase in its members' income and an increase by 2.58% of the forest cover. To maintain the success of a sustainable restoration program, high commitment from the community is needed. This research has been conducted in June-July 2019 at West Lampung District, Lampung Province, Indonesia. The objective of this research is to analyse the social variables that affect restoration in the protection forest. The dependent variable is income and independent variables consist of respondents’ characteristics as individuals and social characteristics of the community. Based on the multiple regression linear analysis from 75 respondents, it was found that the significant variables for the sustainability of the restoration of Bukit Rigis protected forest are as follow: age, sex, education, status in CFG, distance from home to CF areas, social aids and social capital (networks, norms and trust). Existence of the youth groups namely Himpunan Pemuda Peduli Hutan dan Lingkungan (HPPHL) and Melati Women Forest Farmer Group (WFFG) plays an  important role in implementing the restoration program. Establishment of HPPHL will ensure regeneration in maintaining the sustainability of restoration achievements. The role of WFFG is also important because their households’ income is supported by WFFG and enables the BW CFG members to be more concentrated in maintaining forest sustainability.


2021 ◽  
Vol 8 (2) ◽  
pp. 135-157
Author(s):  
Tatan Sukwika ◽  
Lidya Fransisca

Developing and maintaining forest sustainably is a way to support sustainable development. From the technical point of view, the sustainability of community forest could be articulated not only based on the three aspects i.e. economic (ECO), social culture (SOC), ecology (EGY), but it can also include dimensions of legal & institutional (LIT), and accessibility & technology (ACT). This study aims to determine variables of sustainability dimensions that have a direct positive effect on the sustainability of the community forests (SCF), to identify variables that affect SCF and variables of sustainability dimensions that have  dominant effect on SCF. This study employed 70 samples of forest farmers’ group in Bogor regency. The respondents were purposively selected based on consideration of the criteria for forest farmer groups namely beginner, intermediate, and advanced. The Analysis tools used PLS-SEM. Sustainability dimensions of ECO, EGY, LIT, and ACT have a significant positive direct effect on SCF. The mediational hypothesis testing suggested that there is a partial mediation from ECO and EGY to SCF, which is consistent and have a positive value. Based on the coefficient value of the total-effect, among the five dimensions, ecology value was the biggest and the most robust. The policy implies that the ecological aspects considered the importance and strategy. Therefore, the value and productivity of the community forest structure and composition need to be maintained.


2021 ◽  
Vol 8 (2) ◽  
pp. 159-171
Author(s):  
Teguh Darmawan ◽  
Adik Bahanawan ◽  
Danang S. Adi ◽  
Wahyu Dwianto ◽  
Naresworo Nugroho

Removing the outer part of bamboo for manufacturing flat bamboo lamination has disadvantage on the density of the product. The purpose of this experiment was to investigate the fixation of compressed bamboo from curved cross-section slats. The compression of bamboo slats using densification technique was aimed for uniform density. Furthermore, steam treatments were conducted to fix the deformation. The compressed bamboo slats revealed that the density of the samples at the bottom parts increased from 0.40–0.56 g/cm3 to 0.89–1.05 g/cm3 after pressing with a compression level between 46.98–63.97%, while the samples in the middle parts increased from 0.70–0.83 g/cm3 to 1.02–1.18 g/cm3 with the compression level of 32.92–41.50%. These results were slightly higher than that of the upper parts, which was between 0.91–0.98 g/cm3. The recovery of set decreased and the weight loss increased with  increasing  temperature and steam treatment time. Fixation of compressive deformation could be achieved at 160°C within 60 minutes. The bottom parts of samples experienced a slightly greater weight loss compared to the middle parts, i.e. 8.38% and 7.49%, respectively. The anatomical structure of bamboo tended to deform during densification process. Furthermore, the steam treatments affected  the colour of densified bamboo which became darker. From this experiment, it can be concluded that the manufacture of laminated bamboo from bamboo slats can be uniformed in strength by equalizing the density at the bottom and middle with the upper parts through the densification technique. However, further research should be conducted to know the delamination and shear strength of the bamboo lamination.


2021 ◽  
Vol 8 (2) ◽  
pp. 241-257
Author(s):  
Subhajit Lahiri ◽  
Sudhansu Sekhar Dash

Habitat destruction, over exploitation, monoculture are major reasons for loss of primary forests in Himalaya. Tree population, composition and diversity particularly in the temperate Himalaya play a key role in the maintenance of many ecosystem services and natural biogeochemical cycles. The present study explores composition and regeneration status of tree species in a temperate mixed forest in Kyongnosla Alpine Sanctuary, East Sikkim, India.  Two sites at an elevation range of 2800–3800 m were selected and 20 plots of 20 m × 20 m for trees, 80 plots of 5 m × 5 m for saplings, and 160 plots of 1 m × 1 m for seedlings were sampled to study the regeneration status. A total of 17 tree species belonging to 9 genera and 8 families were recorded of which Rhododendron was the most dominant genus with maximum number of species. All the phytosociological attributes, such as relative density, abundance and important value index were calculated. The average species richness of adult trees and saplings was 13.5± 0.7 and for seedlings it was 12.5 ± 0.07. The mean density of seedlings was 3609.77 ± 494.39 individuals/ ha, for saplings  1540 ± 113.13 individuals/ha and of mature trees  548.75 ± 8.83 individuals/ha. Total basal area cover ranged from 36.61 to 40.35 m2/ha for trees, from 1.54 to 1.71 m2/ha for saplings.  Fair regeneration was observed in 64.72% of total species; good regeneration observed in 17.64% species, 11.76 % species exhibited poor regeneration while 5.88% showed no regeneration.  Density-diameter distribution exhibited decrease in tree densities towards higher DBH classes. The study not only provides reliable information on the ecosystem’s health of the sanctuary but also will help in understanding the complexity of the ecosystem function and an approach to conservation of biota.


2021 ◽  
Vol 8 (2) ◽  
pp. 187-197
Author(s):  
Halil Barış Özel ◽  
Barbaros Yaman ◽  
Tuğrul Varol

Scots pine is geographically the most widespread pine species in the world, and it shows different growth responses to climate and environmental factors in diverse ecological sites. We studied both the stand dynamics and climate-growth relationships of Scots pine in isolated coastal stand (recently found) in the Western Black Sea Region of Turkey. The homogeneity index of this stand has varied between 1.92-3.56. In growth-ring analyses, after cross-dating of individual chronologies, COFECHA and ARSTAN software were used respectively for chronology quality control and standardization (detrend). In this way, a 58-year-long chronology (1959-2016) of Scots pine was constructed. In addition, DENDROCLIM software was used for investigating Scots pine’s radial growth-climate relationships. Mean sensitivity changed from 0.163 to 0.331, with a mean of 0.183. Mean correlation among trees and signal to noise ratio were 0.389 and 7.012 respectively. In terms of the effect of precipitation on the radial growth of Scots pine in this site, the correlation coefficients were 0.43 (p<0.05) for December of the previous year and 0.41 (p<0.05) for July of the current year. For all the other months, precipitation had a non-significant effect. As for the maximum and mean air temperature, the correlation coefficients were 0.36 (p<0.05) and 0.40 (p<0.05) for February, and 0.40 (p<0.05) and 0.42 (p<0.05) for March, respectively. However, on the radial growth, while the maximum temperature in August had a negative effect (r= -0.26; p<0.05), minimum temperatures in February, March and July had a positive effect (r= 0.39, 0.40 and 0.34 respectively; p<0.05). It means while higher rains in July and higher temperatures in the late winter-early spring have caused the wider growth rings, the narrower growth rings have been formed in the years with higher maximum temperatures in August in the isolated coastal site of Scots pine.


2021 ◽  
Vol 8 (2) ◽  
pp. 213-227
Author(s):  
Dani Pamungkas ◽  
Aziz Umroni ◽  
Nurhuda Adi Prasetyo

Screw tree (Helicteres isora) is a shrub species (Fam: Malvaceae) with 1.5–4 m in height and  with multi-main trunks up to 9–12. In Indonesia, kayu ules has been used as a traditional medicine, known as jamu, and has been commercialized. In order to cultivate this species, vegetative propagation is likely promising compared to the generative propagation since seed viability is low and cannot be stored for longterm. Nevertheless, there is a lack of information on which diameter classes, media types and light intensities would give the best result for vegetative propagation. This research aimed to obtain information on which diameter classes and media that were suitable for kayu ules stem cutting propagation and to what degree the light intensity would be best for the growth of the seedlings of kayu ules. Three diameter classes and four media types were employed in a  complete random design under the greenhouse environment.   Three months old good quality vegetatively-propagated seedlings were transplanted under two light intensities (under transparent canopy and shading net). The result showed that  considering the factor of diameter classes and media in kayu ules stem cutting propagation, it had improved the survival of the stem cutting. Diameter class I was best grown in media type 3 with 46.67 ± 12.2 % of survival rate, diameter class II was best grown in media type 2 with 38.67 ± 11.6 % of survival rate, whereas diameter class III was best grown in media type 4 with 52 ± 6.9 % of survival rate. The transplanted seedlings also grew significantly better under transparent canopy with higher light intensity. The distinctive features of screw tree under shading net were wider leaf area, higher specific leaf area and relative water content but it was lower in above ground dry biomass compared to the kayu ules under transparent canopy.


2021 ◽  
Vol 8 (2) ◽  
pp. 199-211
Author(s):  
Tatang Tiryana ◽  
Lailatul Khasanah ◽  
Priyanto Priyanto ◽  
Sri Rahaju ◽  
Muhdin Muhdin

Form factors and volume models are often be used in the estimation of tree volumes. However, a few studies have developed and evaluated the accuracy of form factors and volume models for estimating tree volumes of community forests. This study aimed to formulate form factors and volume models and assess their prediction accuracy for estimating tree bole volumes of mahogany at community forests in Central Java. This study used 120 sample trees with diameters of 6–38 cm to formulate artificial and absolute form factors and to develop tree bole volume models. These form factors coupled with bole height and total height were used in simple volume equations. Regression analyses were used to develop volume models using the diameter and total height as predictors. The simple volume equations and volume models' prediction accuracy was evaluated using a cross-validation dataset and independent dataset (30 sample trees). The artificial form factor (0.68 ± 0.11) of mahogany, which was higher than the absolute form factor (0.46 ± 0.09), provided accurate estimates of tree bole volumes when it was used with the bole height instead of the total height. The volume model that uses diameter and total height produced the most accurate estimates, while the volume model that uses diameter alone provided the most practical yet reliable tool for estimating tree bole volumes of mahogany. The results of this study are useful for improving community forest management.


2021 ◽  
Vol 8 (1) ◽  
pp. 1-12
Author(s):  
Alfonsus H Harianja ◽  
Anisse M. Sinaga ◽  
Ferry A Hawari ◽  
Ridwan Fauzi

Batak Toba community who live in the surrounding forests utilise forest-fruits that grow around their settlement.  This research aims to describe the important value of  the forest fruits using the Local Users Value Index (LUVI) assessment as most of  the fruits have not yet been traded.  The research was conducted in Simardangiang and Sitoluama Villages in North Tapanuli Regency, 2015. Data collection was done by interviewing 65 respondents selected purposively based on gender and age classification. The results showed that there were 29 species of  forest fruits utilised by the community. They were categorised into four utilisation types: fresh fruit, flavouring fruit, processed fruit, and medicines.  In Simardangiang Village, the five most important fruits were kapundung or menteng (Baccaurea racemose) (0.56), hopong (Macaranga lowii) (0.52), sotul, santol or sentul (Sandoricum koetjape) (0.48), harimonting or kemunting (Rhodomyrtus tomentosa) (0.47), and habo or kabau (Archidendron bubalinum) (0.42). Meanwhile, in Sitoluama Village, the five most important fruits were kapundung (Baccaurea racemosa) (0.50), hopong (Macaranga lowii) (0.41), sihim or rotan manau (Calamus manan) (0.32), handis or gamboge (Garcinia xanthochymus) (0.32), and mobe (Artocarpus dadah) (0.19). The numbers in parentheses are the important value based on LUVI. The forest fruits that have domestication potency are kapundung (Baccaurea racemose), hopong (Macaranga Iowii), sihim (Calamus manan), handis (Garcinia xanthochymus), mobe (Artocarpus dadah), harimonting (Rhodomyrtus tomentosa), sotul (Sandorium koetjape) and habo (Archidendron bubalinum).


Sign in / Sign up

Export Citation Format

Share Document