Electrical Conductivity Enhancement of Epoxy by Hybrid Carbon Nanotubes and Self-made Silver Nanoparticles

2019 ◽  
Vol 20 (7) ◽  
pp. 1480-1485 ◽  
Author(s):  
Xiao Min Zhang ◽  
Xiao Li Yang ◽  
Kun Yan Wang
2012 ◽  
Vol 96 ◽  
pp. 71-75 ◽  
Author(s):  
Da Zhao ◽  
Tao Liu ◽  
Jin Gyu Park ◽  
Mei Zhang ◽  
Jen-Ming Chen ◽  
...  

2015 ◽  
Vol 3 (39) ◽  
pp. 10256-10266 ◽  
Author(s):  
Ivan Puchades ◽  
Colleen C. Lawlor ◽  
Christopher M. Schauerman ◽  
Andrew R. Bucossi ◽  
Jamie E. Rossi ◽  
...  

Electronic-type-separated SWCNTs thin-films were used to demonstrate that the strength of the redox potential of dopants influences their electrical conductivity enhancement.


2021 ◽  
Author(s):  
Aigbodion Victor Sunday ◽  
Solomon Chijioke Madu ◽  
Uche Chinweoke Ogbuefi ◽  
C.U Nwoji

Abstract An attempt was made in this work to decorated carbon nanotubes(CNTs) in a polymer matrix using biosynthesized silver nanoparticles (GAgNPs) using Cashew leaves as a reduction agent. The new hybrid epoxy-CNTs+ GAgNPs composites were produced by modified solution-stir-cast method. The microstructure, thermal properties, strength, and electrical conductivity of the produced composites were determined. The electrical conductivity of the epoxy polymer has been enhanced from 5.6x10-13S/cm to 4.80x10-3S/cm for epoxy-0.5%CNTs and 9.1x10-3S/cm epoxy-0.5%CNTs-0.5%GAgNPs. GAgNPs was effective used to improve the strength of conducting epoxy-CNTs for electronic devices. The addition of CNTs and GAgNPs to epoxy increases the glass transition temperature. It was established that GAgNPs can be promising materials to enhanced thermal conductivity, strength, electrical conductivity of epoxy-CNTs and recover the potential reduction for electronic devices application.


NANO ◽  
2009 ◽  
Vol 04 (04) ◽  
pp. 217-223 ◽  
Author(s):  
ALI BAHARI ◽  
H. HEKMATARA ◽  
R. SEPAHVAND ◽  
MOHSEN ADELI

A simple method has been developed for decorating multi wall carbon nanotubes (MWCNTs) with palladium and silver nanoparticles. In this method, MWCNT was opened and functionalized using nitric and sulfuric acid mixture. Then citric acid was polymerized in the presence of functionalized MWCNT and MWCNT-graft-poly (citric acid) (MWCNT-g-PCA) was obtained. The mixing of MWCNT-g-PCA with metal salts, such as palladium chloride and silver nitrate, leads to encapsulation of metal nanoparticles in the polymeric shell ( MWCNT/Pd, AgNPs ). The structure of MWCNT/Pd and AgNPs were characterized by usual spectroscopy and microscopy methods. The influence of nanoparticles on the electrical conductivity of MWCNT was also investigated.


Author(s):  
Abdullah Abdulhameed ◽  
Nur Zuraihan Abd Wahab ◽  
Mohd Nazim Mohtar ◽  
Mohd Nizar Hamidon ◽  
Suhaidi Shafie ◽  
...  

2019 ◽  
Author(s):  
Patricia Scheurle ◽  
Andre Mähringer ◽  
Andreas Jakowetz ◽  
Pouya Hosseini ◽  
Alexander Richter ◽  
...  

Recently, a small group of metal-organic frameworks (MOFs) has been discovered featuring substantial charge transport properties and electrical conductivity, hence promising to broaden the scope of potential MOF applications in fields such as batteries, fuel cells and supercapacitors. In combination with light emission, electroactive MOFs are intriguing candidates for chemical sensing and optoelectronic applications. Here, we incorporated anthracene-based building blocks into the MOF-74 topology with five different divalent metal ions, that is, Zn2+, Mg2+, Ni2+, Co2+ and Mn2+, resulting in a series of highly crystalline MOFs, coined ANMOF-74(M). This series of MOFs features substantial photoluminescence, with ANMOF-74(Zn) emitting across the whole visible spectrum. The materials moreover combine this photoluminescence with high surface areas and electrical conductivity. Compared to the original MOF-74 materials constructed from 2,5-dihydroxy terephthalic acid and the same metal ions Zn2+, Mg2+, Ni2+, Co2+ and Mn2+, we observed a conductivity enhancement of up to six orders of magnitude. Our results point towards the importance of building block design and the careful choice of the embedded MOF topology for obtaining materials with desired properties such as photoluminescence and electrical conductivity.


Sign in / Sign up

Export Citation Format

Share Document