The investigation of seepage model for columnar jointed rock masses during cyclic loading and unloading of confining pressure

2020 ◽  
Vol 13 (14) ◽  
Author(s):  
Zhiming Chao ◽  
Guotao Ma ◽  
Meng Wang
Keyword(s):  
Cyclic Loading ◽  
Confining Pressure ◽  
Jointed Rock ◽  
Rock Masses ◽  
Jointed Rock Masses ◽  
Cyclic Loading And Unloading ◽  
Loading And Unloading ◽  
Seepage Model

scholarly journals Permeability of the Hydrated Shale under Cyclic Loading and Unloading Conditions

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Liu Xianshan ◽  
Li Man ◽  
Xu Ming ◽  
Kang Zhiyong
Keyword(s):  
Cyclic Loading ◽  
Confining Pressure ◽  
Loading Conditions ◽  
Permeability Evolution ◽  
Loading Process ◽  
Cyclic Loading And Unloading ◽  
Initial Loading ◽  
Cyclic Processes ◽  
Loading And Unloading ◽  
Shale Permeability

The hydrated shales under cyclic loading and unloading conditions are common for the shale reservoir development; corresponding mechanical properties and permeability evolution are very significant and should be deeply researched. Firstly, the experiments of the hydrated shales under the above conditions are discussed, showing that the peak strength is lower and corresponding permeability is higher for more days of hydrating treatment. Secondly, the damage theory is proposed to analyze the shale permeability evolution due to hydromechanical damage and get permeability variation under initial loading and unloading conditions, observing that the permeability in the loading process decreases with increasing confining pressure and increases in the unloading process with decreasing confining pressure; however, the former changes much greater than the latter considering the same confining pressure, indicating that the irreversible damage for the hydrated shales in this cyclic condition has resulted in obvious difference of the permeability. Furthermore, the curves between the permeability and confining pressure based on the experimental data are fitted as negative exponential functions under initial loading conditions and power functions under more cyclic loading conditions, showing that more loading process will change the permeability evolution model. However, the permeability while unloading changes smoothly and can be fitted as a power function with the confining pressure. And in addition, the loss ratio and recovery ratio of the permeability have been deeply researched under five cyclic loading and unloading conditions, thoroughly explaining the permeability decreasing variation with more cyclic processes. Finally, the sensitive coefficients of the permeability have been investigated to observe the largest coefficients under initial cyclic conditions and less and less with more cyclic processes, especially the coefficients while loading which are more sensitive to lower confining pressure and smaller while unloading, which is in accordance with the shale permeability loss and recovery variation, revealing the permeability evolution of the hydrated shale under complex extracted environment.

scholarly journals Experimental Study on Mechanical Properties of Deep Buried Granite under Different Confining Pressures

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Jun Zhao ◽  
Tan Zhang
Keyword(s):  
Cyclic Loading ◽  
Confining Pressure ◽  
Surrounding Rock ◽  
Underground Engineering ◽  
Failure Characteristics ◽  
Deformation And Failure ◽  
Cyclic Loading And Unloading ◽  
Confining Pressures ◽  
Crack Damage Stress ◽  
Loading And Unloading

Brittle failure of hard rock poses a serious threat to the stability of surrounding rock in deep underground engineering. In order to study the deformation and failure characteristics of deep buried granite under high confining pressure cyclic loading and unloading, MTS815 electro-hydraulic servo rock test system was used to conduct cyclic loading and unloading tests under confining pressures of 15 MPa, 35 MPa, 45 MPa, and 55 MPa, and the corresponding stress-strain curves and deformation failure characteristic curves were obtained. The experimental results show the follows: (1) under the same confining pressure, the peak strength, crack initiation stress, crack damage stress, and Poisson’s ratio of the specimens under cyclic loading and unloading are larger than those under conventional triaxial loading and unloading, and the unloading elastic modulus is smaller than that, under conventional triaxial compression; (2) the results show that, under different confining pressures, the granite samples show obvious brittle failure characteristics, the elastic modulus and crack initiation stress increase first and then decrease with the confining pressure, the peak strength and crack damage stress of the samples increase linearly with the confining pressure, and Poisson’s ratio increases first and then remains unchanged with the confining pressure; (3) under the two kinds of stress conditions, the macroscopic failure of the samples is mainly shear failure. The deformation and failure law of granite samples revealed in this study has significant reference value for the selection of rock mass mechanical model of surrounding rock stability of underground engineering, the formulation of surrounding rock support countermeasures, and the evolution law of mechanical parameters with damage variables.

Adjustable buttons for ACL graft cortical fixation partially fail with cyclic loading and unloading

2018 ◽  
Vol 27 (8) ◽  
pp. 2530-2536 ◽  
Author(s):  
J. Glasbrenner ◽  
C. Domnick ◽  
M. J. Raschke ◽  
T. Willinghöfer ◽  
C. Kittl ◽  
...  
Keyword(s):  
Cyclic Loading ◽  
Acl Graft ◽  
Cyclic Loading And Unloading ◽  
Loading And Unloading
Sign in / Sign up

Export Citation Format

Share Document