Phase equilibrium and characterization of ionic clathrate hydrates formed with tetra- n -butylammonium bromide and nitrogen gas

2016 ◽  
Vol 413 ◽  
pp. 249-253 ◽  
Author(s):  
Sanehiro Muromachi ◽  
Hidenori Hashimoto ◽  
Tatsuo Maekawa ◽  
Satoshi Takeya ◽  
Yoshitaka Yamamoto
2015 ◽  
Vol 93 (8) ◽  
pp. 850-857 ◽  
Author(s):  
Kyuchul Shin ◽  
Igor L. Moudrakovski ◽  
Konstantin A. Udachin ◽  
Christopher I. Ratcliffe ◽  
John A. Ripmeester

Ionic hydrates are known to form numerous clathrate structures in which either the cations or anions sit in cages and the counterions are incorporated into the water framework. Due to the inclusion of the ionic species, such ionic clathrate hydrates not only show many peculiar features such as metal ion encagement and superoxide ion generation, but also exhibit notable physicochemical properties such as outstanding ionic conductivity and thermal stability. Thus, the ionic clathrate hydrates are considered for their potential applicability in various fields, including those that involve solid electrolytes, gas sensors, and energy storage. In this study, we report the design, synthesis, and characterization of the first ionic clathrate hydrate of the hexagonal structure-H (Str.H) crystal type. Diethyl-dimethyl-ammonium hydroxide hydrate was synthesized with CH4 and Xe as help gases, and the crystal structure was identified by powder X-ray diffraction analysis. Further confirmation of the formation of Str.H was obtained from Raman spectroscopy and 13C, 129Xe, and 2H solid-state NMR spectroscopy. From 13C NMR and ab initio calculations, it was shown that the quaternary ion occupies the large cage of Str.H with a conformation different from that in solution, due to constraints imposed by the dimensions of the cage. The H deficiency introduced by substitution of OH– for a water molecule appears, from 129Xe NMR, to be disordered over the framework, and, from 2H NMR, to substantially increase the rate of reorientational mobility of the D atoms in the framework, over that observed for a Str.I hydrate and for ice. The Str.H hydrates are commonly more stable than other structures, thus the present findings on the ionic Str.H clathrate hydrate may offer a new approach for improving the stability of ionic clathrate hydrates for their practical application.


2010 ◽  
Vol 114 (36) ◽  
pp. 11838-11846 ◽  
Author(s):  
T. Rodionova ◽  
V. Komarov ◽  
G. Villevald ◽  
L. Aladko ◽  
T. Karpova ◽  
...  

2018 ◽  
Vol 96 (2) ◽  
pp. 217-225 ◽  
Author(s):  
Mina Mozafari ◽  
Lalangi Chandrasena ◽  
Iain McKenzie ◽  
Kerim Samedov ◽  
Paul W. Percival

Gas hydrates have long been of interest to the petrochemical industry, but there has been growing interest in potential applications for carbon dioxide sequestration and hydrogen storage. This has prompted many fundamental studies of structure and host–guest interactions, but there has been relatively little investigation of chemical reactions of the guest molecules. In previous work, we have shown that it is possible to use muon spin spectroscopy to characterize H atom like muonium and muoniated free radicals formed in clathrate hydrates. Muonium (Mu) forms in clathrate hydrates of cyclopentane and tetrahydrofuran, whereas furan and its dihydro derivatives form radicals. The current work extends studies to clathrates hydrates of other five-membered heterocycles: thiophene, pyrrole, and isoxazole. All form structure II hydrates. In addition to the clathrates, pure liquid samples of the heterocycles were studied to aid in the assignment of radical signals and for comparison with the enclathrated radicals. Similar to furan, two distinct radicals are formed when Mu reacts with thiophene and pyrrole. However, only one muoniated radical was detected from isoxazole. Muon, proton, and nitrogen hyperfine constants were determined and compared with values predicted by DFT calculations to aid the structure assignments. The results show that Mu adds preferentially to the carbon adjacent to the heteroatom in thiophene and pyrrole and to the carbon adjacent to oxygen in isoxazole. The same radicals are formed in clathrates, but the spectra have broader signals, suggesting slower tumbling. Furthermore, additional signals in the avoided level-crossing spectra indicate anisotropy consistent with restricted motion of the radicals in the clathrate cages.


Diversity ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 422
Author(s):  
Ryosuke Nakai ◽  
Takeshi Naganuma ◽  
Nozomi Tazato ◽  
Tadao Kunihiro ◽  
Sho Morohoshi ◽  
...  

We previously showed that novel filterable bacteria remain in “sterile” (<0.2 μm filtered) terrestrial environmental samples from Japan, China, and Arctic Norway. Here, we characterized the novel filterable strain IZ6T, a representative strain of a widely distributed lineage. Phylogenetic analysis showed that this strain was affiliated with the Rhizobiales (now proposed as Hyphomicrobiales) of Alphaproteobacteria, but distinct from any other type strains. Strain IZ6T shared the following chemotaxonomic features with the closest (but distantly) related type strain, Flaviflagellibacter deserti SYSU D60017T: ubiquinone-10 as the major quinone; phosphatidylethanolamine, phosphatidylcholine, and phosphatidylglycerol as major polar lipids; and slightly high G+C content of 62.2 mol%. However, the cellular fatty acid composition differed between them, and the unsaturated fatty acid (C18:1ω7c/C18:1ω6c) was predominantly found in our strain. Moreover, unlike methyrotrophs and nitrogen-fixers of the neighboring genera of Hyphomicrobiales (Rhizobiales), strain IZ6T cannot utilize a one-carbon compound (e.g., methanol) and fix atmospheric nitrogen gas. These findings were consistent with the genome-inferred physiological potential. Based on the phylogenetic, physiological, and chemotaxonomic traits, we propose that strain IZ6T represents a novel genus and species with the name Terrihabitans soli gen. nov., sp. nov. (=NBRC 106741T = NCIMB 15058T). The findings will provide deeper insight into the eco-physiology of filterable microorganisms.


2019 ◽  
Vol 966 ◽  
pp. 444-450 ◽  
Author(s):  
Fandi Angga Prasetya ◽  
Ufafa Anggarini ◽  
Yudha Zakaria ◽  
Rosa Dwi Sasqia Putri

Supercapacitor require electrode which has high surface area so that it able to store large amounts of charge. In this study, electrode was synthesized from carbon of Borassus Flabellifer L fiber which was carried out through activation and carbonization processes. Raw material was calcined at 400°C for 4 hours followed by activation with NaOH 1 M. The carbonization was then conducted in Nitrogen gas flowing by temperature variations; 650°C, 750°C, and 850°C with a constant heating rate of 20 °C/min. Based on XRD data, it was shown that the material has formed Reduced graphene Oxide (RGO) which has main peaks at (2θ) 240 and 440 with higher purity in higher temperature. SEM results clarified more pores formation at higher temperature which is mesoporous. Cyclic Voltammetry (CV) test was done to determine the capacitance value. By RGO forming with high porosity, it is suitable for supercapacitor electrode application and CV test has examined that heating of Borassus Flabelifer L fiber at 850°C with 5 mV/s scan rate has the highest specific capacitance by 8.25 F/gram with Energy density is 4.125 watt/gram.


2020 ◽  
Vol 403 ◽  
pp. 103-109
Author(s):  
Jana Ptačinová ◽  
Juraj Ďurica ◽  
Matej Pašák ◽  
Martin Kusy ◽  
Peter Jurči

Microstructural characterization of ledeburitic tool steel Vanadis 6 after sub-zero treatment and tempering has been examined. The samples were heat treated using following schedules: heating to the austenitizing temperature (TA = 1050 °C) in a vacuum furnace, hold at the final temperature for 30 min. and nitrogen gas quenching (5 bar). The sub-zero treatments consisted of immediate (after quenching) immersion of the material into the liquid helium (-269 °C), hold at the soaking temperature and removal the samples to be heated to a room temperature. Double tempering has been performed at the temperatures from the range 170 – 530 °C, whereas each tempering cycle was realized with a hold of 2 h. Typical heat treated microstructure of ledeburitic steels consists, besides of the martensitic matrix with certain amount of retained austenite, of several types of carbides – eutectic, secondary and small globular carbides. In sub-zero treated steel the amount of retained austenite is significantly reduced. The population density of small globular carbides increase as a result of sub-zero treating. Tempering of the material resulted in decrease in population density of small globular carbides with increasing the tempering temperature. The hardness of sub-zero treated material is higher than that of conventionally quenched one. Also, this tendency is preserved when the steel is low-temperature tempered. On the other hand, the hardness of conventionally quenched steel becomes higher than that of SZT one when tempered at the temperature of secondary hardening.


Sign in / Sign up

Export Citation Format

Share Document