The Determination of Spatial Homogeneity in Multiphase Mixtures

1990 ◽  
Vol 48 (1) ◽  
pp. 424-425
Author(s):  
Zülal Misirli ◽  
Burhanettin S. Altan ◽  
Hüseyin Yörücü
Keyword(s):  
Standard Deviation ◽  
Finite Size ◽  
Second Phase ◽  
Spatial Homogeneity ◽  
Ratio Size ◽  
Second Phase Particles ◽  
Relative Standard ◽  
Image Area ◽  
Automated Technique

The modifications of the properties of composite materials by controlling the ratio, size, shape, orientation and spatial distribution of the second phase particles is a well known phenomena. Although there are technique available for the quantifying of most of these parameters, there is no established technique for the determination of the spatial homogeneity; yet this property is also highly influental on the behavior of the material. The aim of this paper is to introduce a fully automated technique to determine the spatial homogeneity of second phase particles.The technique presented in this paper was based on the technique reported by Eisenkolb and Lange and Hirlinger. In this technique the image area was divided by a grid having equal size squares (Fig.1). In a homogeneous mixture the proportion of the second phase would be the same in each square. However, because of the finite size and the agglomeration of particles, the proportion of the second phase varies. This variation is best represented by Relative Standard Deviation, Srel, which is defined as the standard deviation divided by the average. As finer grid sizes are used Srel would naturally increase. It was assumed that for a random dispersion Srel increases linearly as the size of the grid squares becomes smaller. In this study it was shown mathematically that this increase becomes faster when agglomerations are present.

Polishing process effect on the image of dispersed precipitates

1984 ◽  
Vol 42 ◽  
pp. 534-535
Author(s):  
C.T. Hu ◽  
C.W. Allen
Keyword(s):  
Matrix Material ◽  
Specimen Preparation ◽  
Second Phase ◽  
Precipitate Particle ◽  
Polishing Process ◽  
Second Phase Particles ◽  
The Matrix ◽  
Surface Profiles ◽  
Thinning Process

One important problem in determination of precipitate particle size is the effect of preferential thinning during TEM specimen preparation. Figure 1a schematically represents the original polydispersed Ni3Al precipitates in the Ni rich matrix. The three possible type surface profiles of TEM specimens, which result after electrolytic thinning process are illustrated in Figure 1b. c. & d. These various surface profiles could be produced by using different polishing electrolytes and conditions (i.e. temperature and electric current). The matrix-preferential-etching process causes the matrix material to be attacked much more rapidly than the second phase particles. Figure 1b indicated the result. The nonpreferential and precipitate-preferential-etching results are shown in Figures 1c and 1d respectively.

An Automated Procedure for the Determination of Ammonia in Tobacco

1972 ◽  
Vol 6 (4) ◽  
Author(s):  
P.F. Collins ◽  
W.W. Lawrence ◽  
J.F. Williams
Keyword(s):  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Distillation Method ◽  
Relative Standard ◽  
Tobacco Sample ◽  
Automated Determination

AbstractA procedure for the automated determination of ammonia in tobacco has been developed. Ammonia is extracted from the ground tobacco sample with water and is determined with a Technicon Auto Analyser system which employs separation of the ammonia through volatilization followed by colourimetry using the phenate-hypochlorite reaction. The procedure has been applied to a variety of tobaccos containing from 0.02 to 0.5 % ammonia with an overall relative standard deviation of 2 %. The accuracy of the procedure as judged by recovery tests and by comparison to a manual distillation method is considered adequate

scholarly journals Indirect and Direct Determination of the Casein Content of Milk by Kjeldahl Nitrogen Analysis: Collaborative Study

1998 ◽  
Vol 81 (4) ◽  
pp. 763-774 ◽  
Author(s):  
Joanna M Lynch ◽  
David M Barbano ◽  
J Richard Fleming
Keyword(s):  
Standard Deviation ◽  
Nitrogen Content ◽  
Relative Standard Deviation ◽  
Collaborative Study ◽  
Direct Determination ◽  
Raw Milk ◽  
Method Performance ◽  
Relative Standard ◽  
Milk Casein

Abstract The classic method for determination of milk casein is based on precipitation of casein at pH 4.6. Precipitated milk casein is removed by filtration and the nitrogen content of either the precipitate (direct casein method) or filtrate (noncasein nitrogen; NCN) is determined by Kjeldahl analysis. For the indirect casein method, milk total nitrogen (TN; Method 991.20) is also determined and casein is calculated as TN minus NCN. Ten laboratories tested 9 pairs of blind duplicate raw milk materials with a casein range of 2.42- 3.05℅ by both the direct and indirect casein methods. Statistical performance expressed in protein equivalents (nitrogen ⨯ 6.38) with invalid and outlier data removed was as follows: NCN method (wt%), mean = 0.762, sr = 0.010, SR = 0.016, repeatability relative standard deviation (RSDr) = 1.287℅, reproducibility relative standard deviation (RSDR) = 2.146%; indirect casein method (wt℅), mean = 2.585, repeatability = 0.015, reproducibility = 0.022, RSDr = 0.560℅, RSDR = 0.841; direct casein method (wt℅), mean = 2.575, sr = 0.015, sR = 0.025, RSDr = 0.597℅, RSDR = 0.988℅. Method performance was acceptable and comparable to similar Kjeldahl methods for determining nitrogen content of milk (Methods 991.20, 991.21,991.22, 991.23). The direct casein, indirect casein, and noncasein nitrogen methods have been adopted by AOAC INTERNATIONAL.

Determination of Nitrate in Water by HPLC

2013 ◽  
Vol 448-453 ◽  
pp. 406-408
Author(s):  
Jing Liu ◽  
Xiao Na Ji ◽  
Qing Kai Ren ◽  
Sheng Shu Ai ◽  
Li Jun Wan ◽  
...  
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Recovery Rate ◽  
High Performance ◽  
Separation Efficiency ◽  
Fast Analysis ◽  
Relative Standard

We established a method fordetermination of nitrate in water by High Performance Liquid Chromatography(HPLC). The sample was analysed by HPLC-ADA and was quantitated by externalstandard method after being simply processed. This methd has the advantages ofhigh separation efficiency and fast analysis. The experiment result showed thatthe linearly dependent coefficient was0.994, the recovery rate was between 98.7%～105.7%,the relative standard deviation（RSD）wasless than 2.1 %, and the lowest detectable limit is 0.01ng (S/N=1.6).

scholarly journals Determination of Sodium Cromoglycate by a New Kinetic Spectrophotometric Method in Biological Samples

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Mohsen Keyvanfard ◽  
Khadijeh Alizad ◽  
Razieh Shakeri
Keyword(s):  
Standard Deviation ◽  
Sodium Cromoglycate ◽  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Biological Samples ◽  
Limit Of Detection ◽  
Micellar Medium ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A new kinetic spectrophotometric method is described for the determination of ultratrace amounts of sodium cromoglycate (SCG). The method based on catalytic action of SCG on the oxidation of amaranth with periodate in acidic and micellar medium. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the amaranth at 518 nm, for the first 4 min from initiation of the reaction. Calibration curve was linear in the range of 4.0−36.0 ng mL−1SCG. The limit of detection is 2.7 ng mL−1SCG. The relative standard deviation (RSD) for ten replicate analyses of 12, 20, and 28 ng mL−1SCG was 0.40%, 0.32%, and 0.53%, respectively. The proposed method was used for the determination of SCG in biological samples.

scholarly journals Determination of 1,3-Dichloropropanol in Soy Sauce and Related Products by Headspace Gas Chromatography with Mass Spectrometric Detection: Interlaboratory Study

2005 ◽  
Vol 88 (5) ◽  
pp. 1404-1412 ◽  
Author(s):  
Sarah Hasnip ◽  
Colin Crews ◽  
Nicholas Potter ◽  
Paul Brereton ◽  
Henri Diserens ◽  
...  
Keyword(s):  
Gas Chromatography ◽  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Internal Standard ◽  
Mass Spectrometric ◽  
Soy Sauce ◽  
Headspace Gas Chromatography ◽  
Relative Standard ◽  
Headspace Gas

Abstract An interlaboratory study was performed to evaluate the effectiveness of a headspace gas chromatography (GC) method for the determination of 1,3-dichloro-propan-2-ol (1,3-DCP) in soy sauce and related products at levels above 5 ng/g. The test portion is mixed with an internal standard (d5-1,3-DCP) and ammonium sulfate in a sealed headspace vial. After achieving equilibrium, the headspace is sampled either by gas-tight syringe or solid-phase microextraction (SPME) and analyzed by GC with mass spectrometric detection. 1,3-DCP is detected in the selected-ion mode (monitoring m/z 79 and 81 for 1,3-DCP and m/z 82 for the deuterated internal standard) and quantified by measurement against standards. Test materials comprising soy, dark soy, mushroom soy, and teriyaki sauces, both spiked and naturally contaminated, were sent to 9 laboratories in Europe, Japan, and the United States; of these, 5 used SPME and 4 used syringe headspace analysis. Test portions were spiked at 5.0, 10.0, 20.0, 100.0, and 500.0 ng/g. The average recovery for spiked blank samples was 108% (ranging from 96–130%). Based on results for spiked samples (blind pairs at 5, 10, 20, 100, and 500 ng/g) as well as a naturally contaminated sample (split-level pair at 27 and 29 ng/g), the relative standard deviation for repeatability (RSDr) ranged from 2.9–23.2%. The relative standard deviation for reproducibility (RSDR) ranged from 20.9–35.3%, and HorRat values of between 1.0 and 1.6 were obtained.

scholarly journals Spectrophotometric flow injection procedure to indirect determination of paracetamol in pharmaceutical formulations using o-tolidine as reagent

2018 ◽  
Vol 33 (2) ◽  
pp. 47
Author(s):  
Orlando Fatibello-Filho ◽  
Heberth Juliano Vieira
Keyword(s):  
Standard Deviation ◽  
Detection Limit ◽  
Flow Injection ◽  
Pharmaceutical Formulations ◽  
Injection Method ◽  
Indirect Determination ◽  
Analytical Curve ◽  
Relative Standard ◽  
Injection Procedure

A spectrophotometric flow injection method for the determination of paracetamol in pharmaceutical formulations is proposed. The procedure was based on the oxidation of paracetamol by sodium hypochloride and the determination of the excess of this oxidant using o-tolidine dichloride as chromogenic reagent at 430 nm. The analytical curve was linear in the paracetamol concentration range from 8.50 x 10-6 to 2.51 x 10-4 mol L-1 with a detection limit of 5.0 x 10-6 mol L-1. The relative standard deviation was smaller than 1.2% for 1.20 x 10-4 mol L-1 paracetamol solution (n = 10). The results obtained for paracetamol in pharmaceutical formulations using the proposed flow injection method and those obtained using a USP Pharmacopoeia method are in agreement at the 95% confidence level.

scholarly journals A kinetic method for the determination of phenol

2002 ◽  
Vol 67 (10) ◽  
pp. 661-667 ◽  
Author(s):  
Snezana Mitic ◽  
Valentina Zivanovic
Keyword(s):  
Standard Deviation ◽  
River Water ◽  
Reaction Rate ◽  
Kinetic Method ◽  
Potassium Periodate ◽  
Experimental Conditions ◽  
Inhibiting Effect ◽  
Relative Standard ◽  
Kinetic Expression

Akinetic method for the determination of phenol is proposed. The method is based on the inhibiting effect of phenol on the Mn(II) catalysis of the oxidation of malachite green with potassium periodate. The reaction rate was followed spectrophotometrically at 615 nm. Kinetic expression for the reaction in the presence and absence of phenol are postulated. The optimal experimental conditions for the determination of phenol were established and phenol was determined in concentrations from 30.0 to 188.0 ng/cm3 with a relative standard deviation of 5.5%. The lower detecton limit is 7.8 ng/cm3. The effects of certain foreign ions upon the reaction rate were determined for the assessment of the selectivity of the method. The method was applied for the determination of phenol in tap and river water.

scholarly journals Development and validation of spectrophotometric method for phenylephrine hydrochloride estimation in nasal drops formulations

2008 ◽  
Vol 27 (2) ◽  
pp. 149 ◽  
Author(s):  
Ivana Savić ◽  
Goran Nikolić ◽  
Vladimir Banković
Keyword(s):  
Standard Deviation ◽  
Sodium Hydroxide ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Development And Validation

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

Sign in / Sign up

Export Citation Format

Share Document