scholarly journals Interpolation framework to speed up near-surface wind simulations for data-driven wildfire applications

2018 ◽  
Vol 27 (4) ◽  
pp. 257 ◽  
Author(s):  
O. Rios ◽  
W. Jahn ◽  
E. Pastor ◽  
M. M. Valero ◽  
E. Planas
Keyword(s):  
High Resolution ◽  
Surface Wind ◽  
Computation Time ◽  
Data Driven ◽  
Wind Fields ◽  
Near Surface ◽  
Finite Set ◽  
Multiple Resolutions ◽  
Feasible Alternative ◽  
Wildfire Spread

Local wind fields that account for topographic interaction are a key element for any wildfire spread simulator. Currently available tools to generate near-surface winds with acceptable accuracy do not meet the tight time constraints required for data-driven applications. This article presents the specific problem of data-driven wildfire spread simulation (with a strategy based on using observed data to improve results), for which wind diagnostic models must be run iteratively during an optimisation loop. An interpolation framework is proposed as a feasible alternative to keep a positive lead time while minimising the loss of accuracy. The proposed methodology was compared with the WindNinja solver in eight different topographic scenarios with multiple resolutions and reference – pre-run– wind map sets. Results showed a major reduction in computation time (~100 times once the reference fields are available) with average deviations of 3% in wind speed and 3° in direction. This indicates that high-resolution wind fields can be interpolated from a finite set of base maps previously computed. Finally, wildfire spread simulations using original and interpolated maps were compared showing minimal deviations in the fire shape evolution. This methodology may have an important effect on data assimilation frameworks and probabilistic risk assessment where high-resolution wind fields must be computed for multiple weather scenarios.

Projected changes in pyroconvective conditions in the Iberian Peninsula at the end of the 21st century

2021 ◽  
Author(s):  
Martín Senande-Rivera ◽  
Gonzalo Miguez-Macho
Keyword(s):  
Iberian Peninsula ◽  
21St Century ◽  
Surface Wind ◽  
Atmospheric Stability ◽  
Weather Conditions ◽  
Fire Season ◽  
Fire Plume ◽  
Near Surface ◽  
Wildfire Spread ◽  
Projected Changes

<p>Extreme wildfire events associated with strong pyroconvection have gained the attention of the scientific community and the society in recent years. Strong convection in the fire plume can influence fire behaviour, as downdrafts can cause abrupt variations in surface wind direction and speed that can result in bursts of unexpected fire propagation. Climate change is expected to increase the length of the fire season and the extreme wildfire potential, so the risk of pyroconvection occurence might be also altered. Here, we analyse atmospheric stability and near-surface fire weather conditions in the Iberian Peninsula at the end of the 21st century to assess the projected changes in pyroconvective risk during favourable weather conditions for wildfire spread.  </p>

scholarly journals Fennec dust forecast intercomparison over the Sahara in June 2011

2016 ◽  
Vol 16 (11) ◽  
pp. 6977-6995 ◽  
Author(s):  
Jean-Pierre Chaboureau ◽  
Cyrille Flamant ◽  
Thibaut Dauhut ◽  
Cécile Kocha ◽  
Jean-Philippe Lafore ◽  
...  
Keyword(s):  
High Resolution ◽  
Surface Wind ◽  
Dust Emission ◽  
Airborne Lidar ◽  
Data Sets ◽  
Density Currents ◽  
Data Set ◽  
Near Surface ◽  
Western Sahara ◽  
Deep Well

Abstract. In the framework of the Fennec international programme, a field campaign was conducted in June 2011 over the western Sahara. It led to the first observational data set ever obtained that documents the dynamics, thermodynamics and composition of the Saharan atmospheric boundary layer (SABL) under the influence of the heat low. In support to the aircraft operation, four dust forecasts were run daily at low and high resolutions with convection-parameterizing and convection-permitting models, respectively. The unique airborne and ground-based data sets allowed the first ever intercomparison of dust forecasts over the western Sahara. At monthly scale, large aerosol optical depths (AODs) were forecast over the Sahara, a feature observed by satellite retrievals but with different magnitudes. The AOD intensity was correctly predicted by the high-resolution models, while it was underestimated by the low-resolution models. This was partly because of the generation of strong near-surface wind associated with thunderstorm-related density currents that could only be reproduced by models representing convection explicitly. Such models yield emissions mainly in the afternoon that dominate the total emission over the western fringes of the Adrar des Iforas and the Aïr Mountains in the high-resolution forecasts. Over the western Sahara, where the harmattan contributes up to 80 % of dust emission, all the models were successful in forecasting the deep well-mixed SABL. Some of them, however, missed the large near-surface dust concentration generated by density currents and low-level winds. This feature, observed repeatedly by the airborne lidar, was partly forecast by one high-resolution model only.

scholarly journals High-resolution numerical modeling of mesoscale island wakes and sensitivity to static topographic relief data

2015 ◽  
Vol 8 (8) ◽  
pp. 2645-2653 ◽  
Author(s):  
C. G. Nunalee ◽  
Á. Horváth ◽  
S. Basu
Keyword(s):  
High Resolution ◽  
Vortex Shedding ◽  
Weather Prediction ◽  
Surface Wind ◽  
Wrf Model ◽  
Data Sets ◽  
Data Set ◽  
Near Surface ◽  
Nwp Model ◽  
Height Data

Abstract. Recent decades have witnessed a drastic increase in the fidelity of numerical weather prediction (NWP) modeling. Currently, both research-grade and operational NWP models regularly perform simulations with horizontal grid spacings as fine as 1 km. This migration towards higher resolution potentially improves NWP model solutions by increasing the resolvability of mesoscale processes and reducing dependency on empirical physics parameterizations. However, at the same time, the accuracy of high-resolution simulations, particularly in the atmospheric boundary layer (ABL), is also sensitive to orographic forcing which can have significant variability on the same spatial scale as, or smaller than, NWP model grids. Despite this sensitivity, many high-resolution atmospheric simulations do not consider uncertainty with respect to selection of static terrain height data set. In this paper, we use the Weather Research and Forecasting (WRF) model to simulate realistic cases of lower tropospheric flow over and downstream of mountainous islands using the default global 30 s United States Geographic Survey terrain height data set (GTOPO30), the Shuttle Radar Topography Mission (SRTM), and the Global Multi-resolution Terrain Elevation Data set (GMTED2010) terrain height data sets. While the differences between the SRTM-based and GMTED2010-based simulations are extremely small, the GTOPO30-based simulations differ significantly. Our results demonstrate cases where the differences between the source terrain data sets are significant enough to produce entirely different orographic wake mechanics, such as vortex shedding vs. no vortex shedding. These results are also compared to MODIS visible satellite imagery and ASCAT near-surface wind retrievals. Collectively, these results highlight the importance of utilizing accurate static orographic boundary conditions when running high-resolution mesoscale models.

scholarly journals Comparison of regional and global reanalysis near-surface winds with station observations over Germany

2015 ◽  
Vol 12 (1) ◽  
pp. 187-198 ◽  
Author(s):  
A. K. Kaiser-Weiss ◽  
F. Kaspar ◽  
V. Heene ◽  
M. Borsche ◽  
D. G. H. Tan ◽  
...  
Keyword(s):  
Information Source ◽  
Surface Wind ◽  
Wind Fields ◽  
Near Surface ◽  
Wind Speeds ◽  
Energy Applications ◽  
The North ◽  
Independent Observations ◽  
Spatio Temporal ◽  
The North Atlantic Oscillation

Abstract. Reanalysis near-surface wind fields from multiple reanalyses are potentially an important information source for wind energy applications. Inter-comparing reanalyses via employing independent observations can help to guide users to useful spatio-temporal scales. Here we compare the statistical properties of wind speeds observed at 210 traditional meteorological stations over Germany with the reanalyses' near-surface fields, confining the analysis to the recent years (2007 to 2010). In this period, the station time series in Germany can be expected to be mostly homogeneous. We compare with a regional reanalysis (COSMO-REA6) and two global reanalyses, ERA-Interim and ERA-20C. We show that for the majority of the stations, the Weibull parameters of the daily mean wind speed frequency distribution match remarkably well with the ones derived from the reanalysis fields. High correlations (larger than 0.9) can be found between stations and reanalysis monthly mean wind speeds all over Germany. Generally, the correlation between the higher resolved COSMO-REA6 wind fields and station observations is highest, for both assimilated and non-assimilated (i.e., independent) observations. As expected from the lower spatial resolution and reduced amount of data assimilated into ERA-20C, the correlation of monthly means decreases somewhat relative to the other reanalyses (in our investigated period of 2007 to 2010). Still, the inter-annual variability connected to the North Atlantic Oscillation (NAO) found in the reanalysis surface wind anomalies is in accordance with the anomalies recorded by the stations. We discuss some typical examples where differences are found, e.g., where the mean wind distributions differ (probably related to either height or model topography differences) and where the correlations break down (because of unresolved local topography) which applies to a minority of stations. We also identified stations with homogeneity problems in the reported station values, demonstrating how reanalyses can be applied to support quality control for the observed station data. Finally, as a demonstration of concept, we discuss how comparing feedback files of the different reanalyses can guide users to useful scales of variability.

scholarly journals An Assessment of NASA’s GMAO MERRA-2 Reanalysis Surface Winds

2019 ◽  
Vol 32 (23) ◽  
pp. 8261-8281 ◽  
Author(s):  
D. Carvalho
Keyword(s):  
Surface Wind ◽  
The Other ◽  
Surface Winds ◽  
Wind Fields ◽  
Near Surface ◽  
Wind Speeds ◽  
Wide Range ◽  
Ocean Surface Winds ◽  
The Tropics ◽  
Global Surface

Abstract The quality of MERRA-2 surface wind fields was assessed by comparing them with 10 years of measurements from a wide range of surface wind observing platforms. This assessment includes a comparison of MERRA-2 global surface wind fields with the ones from its predecessor, MERRA, to assess if GMAO’s latest reanalyses improved the representation of the global surface winds. At the same time, surface wind fields from other modern reanalyses—NCEP-CFSR, ERA-Interim, and JRA-55—were also included in the comparisons to evaluate MERRA-2 global surface wind fields in the context of its contemporary reanalyses. Results show that MERRA-2, CFSR, ERA-Interim, and JRA-55 show similar error metrics while MERRA consistently shows the highest errors. Thus, when compared with wind observations, the accuracy of MERRA-2 surface wind fields represents a clear improvement over its predecessor MERRA and is in line with the other contemporary reanalyses in terms of the representation of global near-surface wind fields. All reanalyses showed a tendency to underestimate ocean surface winds (particularly in the tropics) and, oppositely, to overestimate inland surface winds (except JRA-55, which showed a global tendency to underestimate the wind speeds); to represent the wind direction rotated clockwise in the Northern Hemisphere (positive bias) and anticlockwise in the Southern Hemisphere (negative bias), with the exception of JRA-55; and to show higher errors near the poles and in the ITCZ, particularly in the equatorial western coasts of Central America and Africa. However, MERRA-2 showed substantially lower wind errors in the poles when compared with the other reanalyses.

What is the added value of using downscaled CMIP5 data for  the study of climate extremes under  climate change?

2021 ◽  
Author(s):  
Dimitri Defrance ◽  
Thomas Noël ◽  
Harilaos Loukos
Keyword(s):  
Climate Change ◽  
High Resolution ◽  
General Circulation ◽  
Heat Waves ◽  
Surface Wind ◽  
Added Value ◽  
Cumulative Distribution ◽  
Climate Projections ◽  
Geophysical Research ◽  
Near Surface

<p>In the beginning of this century, impacts studies due to climate change were carried out directly with the outputs of the general circulation models of the Atmosphere and the Ocean (AOGCM). However, these models had very low resolutions in the order of several degrees and the climate of some areas, such as monsoon regions, was poorly reproduced. These two disadvantages make it difficult to study the evolution of extremes. Recently, more impact studies are using outputs from multiple AOGCM models that are downscaled and unbiased. The ISIMIP consortium (https://www.isimip.org/) participates in the dissemination of this practice by proposing several AOGCM models with a resolution of 0.5° X 0.5°.</p><p>In our study, a high-resolution climate projections dataset is obtained by statistically downscaling climate projections from the CMIP5 experiment using the ERA5 reanalysis from the Copernicus Climate Change Service. This global dataset has a spatial resolution of 0.25°x 0.25°, comprises 21 climate models and includes 5 surface daily variables at monthly resolution: air temperature (mean, minimum, and maximum), precipitation, and mean near-surface wind speed  (Noël et al. accepted). This dataset is obtained by using the quantile – quantile method Cumulative Distribution Function transform (CDFt) (Vrac et al. 2012, 2016,, developed over  10 years to bias correct or downscale climate model output, and ERA5 land data as a reference . T</p><p>We propose in this communication to present the climate variability by the end of the century in terms of extreme climate indicators such as heat waves or heavy rainfall at the local/grid point level (e.g. city level). Particular attention will be paid to the magnitude of the changes as well as the associated uncertainty.</p><p> </p><p>References</p><p>Vrac, M., Drobinski, P., Merlo, A., Herrmann, M., Lavaysse, C., Li, L., & Somot, S. (2012). Dynamical and statistical downscaling of the French Mediterranean climate: uncertainty assessment.Nat. Hazards Earth Syst. Sci., 12, 2769–2784.</p><p>Vrac, M., Noël, T., & Vautard, R. (2016). Bias correction of precipitation through Singularity Stochastic Removal: Because occurrences matter. Journal of Geophysical Research: Atmospheres, 121(10), 5237-5258.</p><p>Noël, T., Loukos, H., Defrance, D., Vrac, M., & Levavasseur, G. (2020). High-resolution downscaled CMIP5 projections dataset of essential surface climate variables over the globe coherent with ERA5 reanalyses for climate change impact assessments. Data in Brief (accepted, https://doi.org/10.31223/X53W3F)</p>

Evaluation of the Surface Wind Field over Land in WRF Simulations of Hurricane Wilma (2005). Part I: Model Initialization and Simulation Validation

2021 ◽  
Author(s):  
David S. Nolan ◽  
Brian D. McNoldy ◽  
Jimmy Yunge
Keyword(s):  
Wind Field ◽  
Urban Areas ◽  
Initial Conditions ◽  
Surface Wind ◽  
South Florida ◽  
Wind Fields ◽  
Near Surface ◽  
Hurricane Wilma ◽  
Wind Analysis ◽  
Forecasting System

AbstractWhile global and regional dynamical models are used to predict the tracks and intensities of hurricanes over the ocean, these models are not currently used to predict the wind field and other impacts over land. This two-part study performs detailed evaluations of the near-surface, over-land wind fields produced in simulations of Hurricane Wilma (2005) as it traveled across South Florida. This first part describes the production of two high-resolution simulations using the Weather Research and Forecasting Model (WRF), using different boundary layer parameterizations available in WRF: the Mellor-Yamada-Janjić (MYJ) scheme and the Yonsei University (YSU) scheme. Initial conditions from the Global Forecasting System (GFS) are manipulated with a vortex bogussing technique to modify the initial intensity, size, and location of the cyclone. It is found possible through trial and error to successfully produce simulations using both the YSU and MYJ schemes that closely reproduce the track, intensity, and size of Wilma at landfall. For both schemes the storm size and structure also show good agreement with the wind fields diagnosed by H*WIND and the Tropical Cyclone Surface Wind Analysis (TCSWA). Both over water and over land, the YSU scheme has stronger winds over larger areas than MYJ, but the surface winds are more reduced in areas of greater surface roughness, particularly in urban areas. Both schemes produced very similar inflow angles over land and water. The over-land wind fields are examined in more detail in the second part of this study.

scholarly journals High-resolution observations of the near-surface wind field over an isolated mountain and in a steep river canyon

2015 ◽  
Vol 15 (7) ◽  
pp. 3785-3801 ◽  
Author(s):  
B. W. Butler ◽  
N. S. Wagenbrenner ◽  
J. M. Forthofer ◽  
B. K. Lamb ◽  
K. S. Shannon ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
Surface Wind ◽  
Wind Data ◽  
Wind Flow ◽  
Surface Winds ◽  
Mean Flow ◽  
Near Surface ◽  
Wind Speeds ◽  
Synoptic Forcing

Abstract. A number of numerical wind flow models have been developed for simulating wind flow at relatively fine spatial resolutions (e.g., ~ 100 m); however, there are very limited observational data available for evaluating these high-resolution models. This study presents high-resolution surface wind data sets collected from an isolated mountain and a steep river canyon. The wind data are presented in terms of four flow regimes: upslope, afternoon, downslope, and a synoptically driven regime. There were notable differences in the data collected from the two terrain types. For example, wind speeds on the isolated mountain increased with distance upslope during upslope flow, but generally decreased with distance upslope at the river canyon site during upslope flow. In a downslope flow, wind speed did not have a consistent trend with position on the isolated mountain, but generally increased with distance upslope at the river canyon site. The highest measured speeds occurred during the passage of frontal systems on the isolated mountain. Mountaintop winds were often twice as high as wind speeds measured on the surrounding plain. The highest speeds measured in the river canyon occurred during late morning hours and were from easterly down-canyon flows, presumably associated with surface pressure gradients induced by formation of a regional thermal trough to the west and high pressure to the east. Under periods of weak synoptic forcing, surface winds tended to be decoupled from large-scale flows, and under periods of strong synoptic forcing, variability in surface winds was sufficiently large due to terrain-induced mechanical effects (speed-up over ridges and decreased speeds on leeward sides of terrain obstacles) that a large-scale mean flow would not be representative of surface winds at most locations on or within the terrain feature. These findings suggest that traditional operational weather model (i.e., with numerical grid resolutions of around 4 km or larger) wind predictions are not likely to be good predictors of local near-surface winds on sub-grid scales in complex terrain. Measurement data can be found at http://www.firemodels.org/index.php/windninja-introduction/windninja-publications.

scholarly journals Fennec dust forecast intercomparison over the Sahara in June 2011

2016 ◽  
Author(s):  
J.-P. Chaboureau ◽  
C. Flamant ◽  
T. Dauhut ◽  
C. Kocha ◽  
J.-P. Lafore ◽  
...  
Keyword(s):  
High Resolution ◽  
Surface Wind ◽  
Dust Emission ◽  
Airborne Lidar ◽  
Data Sets ◽  
Density Currents ◽  
Data Set ◽  
Near Surface ◽  
Western Sahara ◽  
Deep Well

Abstract. In the framework of the Fennec international programme, a field campaign was conducted in June 2011 over the western Sahara. It led to the first observational data set ever obtained that documents the dynamics, thermodynamics and composition of the Saharan atmospheric boundary layer (SABL) under the influence of the heat low. In support to the aircraft operation, four dust forecasts were run daily at low and high resolutions with convection-parameterizing and convection- permitting models, respectively. The unique airborne and ground-based data sets allowed the first ever intercomparison of dust forecasts over the western Sahara. At monthly scale, large Aerosol Optical Depths (AODs) were forecast over the Sahara, a feature observed by some satellite retrievals but mislocated by others over the Sahel. The AOD intensity was correctly predicted by the highresolution models while being underestimated by the low-resolution models. This was partly because of the generation of strong near-surface wind associated with thunderstorm-related density currents that could only be reproduced by models representing convection explicitly. Such models yield to emissions mainly in the afternoon that dominate the total emission over the western fringes of the Adrar des Iforas and Aïr Mountains in the high-resolution forecasts. Over the western Sahara, where the harmattan contributes up to 80 % of dust emission, all the models were successful in forecasting the deep well-mixed SABL. Some of them, however, missed the large near-surface dust extinction generated by density currents and low-level winds. This feature, observed repeatedly by the airborne lidar, was partly forecast by one high-resolution model only.

Sign in / Sign up

Export Citation Format

Share Document