scholarly journals Role of Tropomyosin in Formin-mediated Contractile Ring Assembly in Fission Yeast

2009 ◽  
Vol 20 (8) ◽  
pp. 2160-2173 ◽  
Author(s):  
Colleen T. Skau ◽  
Erin M. Neidt ◽  
David R. Kovar
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Actin Assembly ◽  
Animal Cells ◽  
Contractile Ring ◽  
Direct Role ◽  
Ring Assembly

Like animal cells, fission yeast divides by assembling actin filaments into a contractile ring. In addition to formin Cdc12p and profilin, the single tropomyosin isoform SpTm is required for contractile ring assembly. Cdc12p nucleates actin filaments and remains processively associated with the elongating barbed end while driving the addition of profilin-actin. SpTm is thought to stabilize mature filaments, but it is not known how SpTm localizes to the contractile ring and whether SpTm plays a direct role in Cdc12p-mediated actin polymerization. Using “bulk” and single actin filament assays, we discovered that Cdc12p can recruit SpTm to actin filaments and that SpTm has diverse effects on Cdc12p-mediated actin assembly. On its own, SpTm inhibits actin filament elongation and depolymerization. However, Cdc12p completely overcomes the combined inhibition of actin nucleation and barbed end elongation by profilin and SpTm. Furthermore, SpTm increases the length of Cdc12p-nucleated actin filaments by enhancing the elongation rate twofold and by allowing them to anneal end to end. In contrast, SpTm ultimately turns off Cdc12p-mediated elongation by “trapping” Cdc12p within annealed filaments or by dissociating Cdc12p from the barbed end. Therefore, SpTm makes multiple contributions to contractile ring assembly during and after actin polymerization.

scholarly journals Actin turnover maintains actin filament homeostasis during cytokinetic ring contraction

2017 ◽  
Vol 216 (9) ◽  
pp. 2657-2667 ◽  
Author(s):  
Ting Gang Chew ◽  
Junqi Huang ◽  
Saravanan Palani ◽  
Ruth Sommese ◽  
Anton Kamnev ◽  
...  
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Myosin Ii ◽  
Contractile Ring ◽  
Ring Contraction ◽  
Actin Turnover ◽  
Exogenous Addition ◽  
Turn Over

Cytokinesis in many eukaryotes involves a tension-generating actomyosin-based contractile ring. Many components of actomyosin rings turn over during contraction, although the significance of this turnover has remained enigmatic. Here, using Schizosaccharomyces japonicus, we investigate the role of turnover of actin and myosin II in its contraction. Actomyosin ring components self-organize into ∼1-µm-spaced clusters instead of undergoing full-ring contraction in the absence of continuous actin polymerization. This effect is reversed when actin filaments are stabilized. We tested the idea that the function of turnover is to ensure actin filament homeostasis in a synthetic system, in which we abolished turnover by fixing rings in cell ghosts with formaldehyde. We found that these rings contracted fully upon exogenous addition of a vertebrate myosin. We conclude that actin turnover is required to maintain actin filament homeostasis during ring contraction and that the requirement for turnover can be bypassed if homeostasis is achieved artificially.

scholarly journals Nonmedially assembled F-actin cables incorporate into the actomyosin ring in fission yeast

2012 ◽  
Vol 199 (5) ◽  
pp. 831-847 ◽  
Author(s):  
Junqi Huang ◽  
Yinyi Huang ◽  
Haochen Yu ◽  
Dhivya Subramanian ◽  
Anup Padmanabhan ◽  
...  
Keyword(s):  
De Novo ◽  
Actin Dynamics ◽  
Actin Assembly ◽  
Animal Cells ◽  
Myosin V ◽  
Contractile Ring ◽  
Division Site ◽  
Ring Assembly ◽  
Actin Cables

In many eukaryotes, cytokinesis requires the assembly and constriction of an actomyosin-based contractile ring. Despite the central role of this ring in cytokinesis, the mechanism of F-actin assembly and accumulation in the ring is not fully understood. In this paper, we investigate the mechanism of F-actin assembly during cytokinesis in Schizosaccharomyces pombe using lifeact as a probe to monitor actin dynamics. Previous work has shown that F-actin in the actomyosin ring is assembled de novo at the division site. Surprisingly, we find that a significant fraction of F-actin in the ring was recruited from formin-Cdc12p nucleated long actin cables that were generated at multiple nonmedial locations and incorporated into the ring by a combination of myosin II and myosin V activities. Our results, together with findings in animal cells, suggest that de novo F-actin assembly at the division site and directed transport of F-actin cables assembled elsewhere can contribute to ring assembly.

scholarly journals The formins Cdc12 and For3 cooperate during contractile ring assembly in cytokinesis

2013 ◽  
Vol 203 (1) ◽  
pp. 101-114 ◽  
Author(s):  
Valerie C. Coffman ◽  
Jennifer A. Sees ◽  
David R. Kovar ◽  
Jian-Qiu Wu
Keyword(s):  
Fluorescence Microscopy ◽  
Fission Yeast ◽  
Actin Filaments ◽  
De Novo ◽  
Ring Formation ◽  
Actin Assembly ◽  
Contractile Ring ◽  
Synthetic Lethal ◽  
Division Site ◽  
Ring Assembly

Both de novo–assembled actin filaments at the division site and existing filaments recruited by directional cortical transport contribute to contractile ring formation during cytokinesis. However, it is unknown which source is more important. Here, we show that fission yeast formin For3 is responsible for node condensation into clumps in the absence of formin Cdc12. For3 localization at the division site depended on the F-BAR protein Cdc15, and for3 deletion was synthetic lethal with mutations that cause defects in contractile ring formation. For3 became essential in cells expressing N-terminal truncations of Cdc12, which were more active in actin assembly but depended on actin filaments for localization to the division site. In tetrad fluorescence microscopy, double mutants of for3 deletion and cdc12 truncations were severely defective in contractile ring assembly and constriction, although cortical transport of actin filaments was normal. Together, these data indicate that different formins cooperate in cytokinesis and that de novo actin assembly at the division site is predominant for contractile ring formation.

scholarly journals Assembly and architecture of precursor nodes during fission yeast cytokinesis

2011 ◽  
Vol 192 (6) ◽  
pp. 1005-1021 ◽  
Author(s):  
Damien Laporte ◽  
Valerie C. Coffman ◽  
I-Ju Lee ◽  
Jian-Qiu Wu
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Stable Node ◽  
Animal Cells ◽  
Contractile Ring ◽  
Cell Interior ◽  
Ring Assembly ◽  
Positional Marker

The contractile ring is essential for cytokinesis in most fungal and animal cells. In fission yeast, cytokinesis nodes are precursors of the contractile ring and mark the future cleavage site. However, their assembly and architecture have not been well described. We found that nodes are assembled stoichiometrically in a hierarchical order with two modules linked by the positional marker anillin Mid1. Mid1 first recruits Cdc4 and IQGAP Rng2 to form module I. Rng2 subsequently recruits the myosin-II subunits Myo2 and Rlc1. Mid1 then independently recruits the F-BAR protein Cdc15 to form module II. Mid1, Rng2, Cdc4, and Cdc15 are stable node components that accumulate close to the plasma membrane. Both modules recruit the formin Cdc12 to nucleate actin filaments. Myo2 heads point into the cell interior, where they efficiently capture actin filaments to condense nodes into the contractile ring. Collectively, our work characterizing the assembly and architecture of precursor nodes defines important steps and molecular players for contractile ring assembly.

scholarly journals The F-actin bundler α-actinin Ain1 is tailored for ring assembly and constriction during cytokinesis in fission yeast

2016 ◽  
Vol 27 (11) ◽  
pp. 1821-1833 ◽  
Author(s):  
Yujie Li ◽  
Jenna R. Christensen ◽  
Kaitlin E. Homa ◽  
Glen M. Hocky ◽  
Alice Fok ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Biochemical Properties ◽  
Ring Formation ◽  
Cross Linking ◽  
Contractile Ring ◽  
Mixed Polarity ◽  
Dividing Cells

The actomyosin contractile ring is a network of cross-linked actin filaments that facilitates cytokinesis in dividing cells. Contractile ring formation has been well characterized in Schizosaccharomyces pombe, in which the cross-linking protein α-actinin SpAin1 bundles the actin filament network. However, the specific biochemical properties of SpAin1 and whether they are tailored for cytokinesis are not known. Therefore we purified SpAin1 and quantified its ability to dynamically bind and bundle actin filaments in vitro using a combination of bulk sedimentation assays and direct visualization by two-color total internal reflection fluorescence microscopy. We found that, while SpAin1 bundles actin filaments of mixed polarity like other α-actinins, SpAin1 has lower bundling activity and is more dynamic than human α-actinin HsACTN4. To determine whether dynamic bundling is important for cytokinesis in fission yeast, we created the less dynamic bundling mutant SpAin1(R216E). We found that dynamic bundling is critical for cytokinesis, as cells expressing SpAin1(R216E) display disorganized ring material and delays in both ring formation and constriction. Furthermore, computer simulations of initial actin filament elongation and alignment revealed that an intermediate level of cross-linking best facilitates filament alignment. Together our results demonstrate that dynamic bundling by SpAin1 is important for proper contractile ring formation and constriction.

scholarly journals The Multiple Roles of Cyk1p in the Assembly and Function of the Actomyosin Ring in Budding Yeast

1999 ◽  
Vol 10 (2) ◽  
pp. 283-296 ◽  
Author(s):  
Katie B. Shannon ◽  
Rong Li
Keyword(s):  
Actin Filaments ◽  
Fluorescent Protein ◽  
Budding Yeast ◽  
Dependent Manner ◽  
Size Change ◽  
Direct Role ◽  
Dynamic Component ◽  
Amino Terminal ◽  
Ring Assembly

The budding yeast IQGAP-like protein Cyk1p/Iqg1p localizes to the mother-bud junction during anaphase and has been shown to be required for the completion of cytokinesis. In this study, video microscopy analysis of cells expressing green fluorescent protein-tagged Cyk1p/Iqg1p demonstrates that Cyk1p/Iqg1p is a dynamic component of the contractile ring during cytokinesis. Furthermore, in the absence of Cyk1p/Iqg1p, myosin II fails to undergo the contraction-like size change at the end of mitosis. To understand the mechanistic role of Cyk1p/Iqg1p in actomyosin ring assembly and dynamics, we have investigated the role of the structural domains that Cyk1p/Iqg1p shares with IQGAPs. An amino terminal portion containing the calponin homology domain binds to actin filaments and is required for the assembly of actin filaments to the ring. This result supports the hypothesis that Cyk1p/Iqg1p plays a direct role in F-actin recruitment. Deletion of the domain harboring the eight IQ motifs abolishes the localization of Cyk1p/Iqg1p to the bud neck, suggesting that Cyk1p/Iqg1p may be localized through interactions with a calmodulin-like protein. Interestingly, deletion of the COOH-terminal GTPase-activating protein-related domain does not affect Cyk1p/Iqg1p localization or actin recruitment to the ring but prevents actomyosin ring contraction. In vitro binding experiments show that Cyk1p/Iqg1p binds to calmodulin, Cmd1p, in a calcium-dependent manner, and to Tem1p, a small GTP-binding protein previously found to be required for the completion of anaphase. These results demonstrate the critical function of Cyk1p/Iqg1p in regulating various steps of actomyosin ring assembly and cytokinesis.

scholarly journals Tropomyosin and Myosin-II Cellular Levels Promote Actomyosin Ring Assembly in Fission Yeast

2010 ◽  
Vol 21 (6) ◽  
pp. 989-1000 ◽  
Author(s):  
Benjamin C. Stark ◽  
Thomas E. Sladewski ◽  
Luther W. Pollard ◽  
Matthew Lord
Keyword(s):  
Motor Activity ◽  
Atpase Activity ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Bound State ◽  
Contractile Ring ◽  
Ring Assembly

Myosin-II (Myo2p) and tropomyosin are essential for contractile ring formation and cytokinesis in fission yeast. Here we used a combination of in vivo and in vitro approaches to understand how these proteins function at contractile rings. We find that ring assembly is delayed in Myo2p motor and tropomyosin mutants, but occurs prematurely in cells engineered to express two copies of myo2. Thus, the timing of ring assembly responds to changes in Myo2p cellular levels and motor activity, and the emergence of tropomyosin-bound actin filaments. Doubling Myo2p levels suppresses defects in ring assembly associated with a tropomyosin mutant, suggesting a role for tropomyosin in maximizing Myo2p function. Correspondingly, tropomyosin increases Myo2p actin affinity and ATPase activity and promotes Myo2p-driven actin filament gliding in motility assays. Tropomyosin achieves this by favoring the strong actin-bound state of Myo2p. This mode of regulation reflects a role for tropomyosin in specifying and stabilizing actomyosin interactions, which facilitates contractile ring assembly in the fission yeast system.

scholarly journals The fission yeast cytokinesis formin Cdc12p is a barbed end actin filament capping protein gated by profilin

2003 ◽  
Vol 161 (5) ◽  
pp. 875-887 ◽  
Author(s):  
David R. Kovar ◽  
Jeffrey R. Kuhn ◽  
Andrea L. Tichy ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Maximum Yield ◽  
Restrictive Temperature ◽  
Permissive Temperature ◽  
Contractile Ring ◽  
Capping Protein ◽  
Ring Assembly ◽  
End Capping ◽  
Actin Cables

Cytokinesis in most eukaryotes requires the assembly and contraction of a ring of actin filaments and myosin II. The fission yeast Schizosaccharomyces pombe requires the formin Cdc12p and profilin (Cdc3p) early in the assembly of the contractile ring. The proline-rich formin homology (FH) 1 domain binds profilin, and the FH2 domain binds actin. Expression of a construct consisting of the Cdc12 FH1 and FH2 domains complements a conditional mutant of Cdc12 at the restrictive temperature, but arrests cells at the permissive temperature. Cells overexpressing Cdc12(FH1FH2)p stop growing with excessive actin cables but no contractile rings. Like capping protein, purified Cdc12(FH1FH2)p caps the barbed end of actin filaments, preventing subunit addition and dissociation, inhibits end to end annealing of filaments, and nucleates filaments that grow exclusively from their pointed ends. The maximum yield is one filament pointed end per six formin polypeptides. Profilins that bind both actin and poly-l-proline inhibit nucleation by Cdc12(FH1FH2)p, but polymerization of monomeric actin is faster, because the filaments grow from their barbed ends at the same rate as uncapped filaments. On the other hand, Cdc12(FH1FH2)p blocks annealing even in the presence of profilin. Thus, formins are profilin-gated barbed end capping proteins with the ability to initiate actin filaments from actin monomers bound to profilin. These properties explain why contractile ring assembly requires both formin and profilin and why viability depends on the ability of profilin to bind both actin and poly-l-proline.

scholarly journals Profilin-mediated Competition between Capping Protein and Formin Cdc12p during Cytokinesis in Fission Yeast

2005 ◽  
Vol 16 (5) ◽  
pp. 2313-2324 ◽  
Author(s):  
David R. Kovar ◽  
Jian-Qiu Wu ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Cell Separation ◽  
The Other ◽  
Temperature Sensitive ◽  
Contractile Ring ◽  
Capping Protein ◽  
Division Site ◽  
Ring Constriction

Fission yeast capping protein SpCP is a heterodimer of two subunits (Acp1p and Acp2p) that binds actin filament barbed ends. Neither acp1 nor acp2 is required for viability, but cells lacking either or both subunits have cytokinesis defects under stressful conditions, including elevated temperature, osmotic stress, or in combination with numerous mild mutations in genes important for cytokinesis. Defects arise as the contractile ring constricts and disassembles, resulting in delays in cell separation. Genetic and biochemical interactions show that the cytokinesis formin Cdc12p competes with capping protein for actin filament barbed ends in cells. Deletion of acp2 partly suppresses cytokinesis defects in temperature-sensitive cdc12-112 cells and mild overexpression of capping protein kills cdc12-112 cells. Biochemically, profilin has opposite effects on filaments capped with Cdc12p and capping protein. Profilin depolymerizes actin filaments capped by capping protein but allows filaments capped by Cdc12p to grow at their barbed ends. Once associated with a barbed end, either Cdc12p or capping protein prevents the other from influencing polymerization at that end. Given that capping protein arrives at the division site 20 min later than Cdc12p, capping protein may slowly replace Cdc12p on filament barbed ends in preparation for filament disassembly during ring constriction.

scholarly journals Roles of Formin Nodes and Myosin Motor Activity in Mid1p-dependent Contractile-Ring Assembly during Fission Yeast Cytokinesis

2009 ◽  
Vol 20 (24) ◽  
pp. 5195-5210 ◽  
Author(s):  
Valerie C. Coffman ◽  
Aaron H. Nile ◽  
I-Ju Lee ◽  
Huayang Liu ◽  
Jian-Qiu Wu
Keyword(s):  
Motor Activity ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Broad Band ◽  
Strong Support ◽  
Cable Model ◽  
Contractile Ring ◽  
Myosin Motor ◽  
Ring Assembly ◽  
Myosin Motors

Two prevailing models have emerged to explain the mechanism of contractile-ring assembly during cytokinesis in the fission yeast Schizosaccharomyces pombe: the spot/leading cable model and the search, capture, pull, and release (SCPR) model. We tested some of the basic assumptions of the two models. Monte Carlo simulations of the SCPR model require that the formin Cdc12p is present in >30 nodes from which actin filaments are nucleated and captured by myosin-II in neighboring nodes. The force produced by myosin motors pulls the nodes together to form a compact contractile ring. Live microscopy of cells expressing Cdc12p fluorescent fusion proteins shows for the first time that Cdc12p localizes to a broad band of 30–50 dynamic nodes, where actin filaments are nucleated in random directions. The proposed progenitor spot, essential for the spot/leading cable model, usually disappears without nucleating actin filaments. α-Actinin ain1 deletion cells form a normal contractile ring through nodes in the absence of the spot. Myosin motor activity is required to condense the nodes into a contractile ring, based on slower or absent node condensation in myo2-E1 and UCS rng3-65 mutants. Taken together, these data provide strong support for the SCPR model of contractile-ring formation in cytokinesis.

Sign in / Sign up

Export Citation Format

Share Document