Preparation and Properties of Li2Zn3Ti4O12-Based Ceramics with a Sintering Aid in the Li2O–B2O3–SiO2 System for LTCC Technology

2021 ◽  
Vol 57 (9) ◽  
pp. 929-936
Author(s):  
D. I. Vershinin ◽  
I. N. Khusainov ◽  
N. A. Makarov
Keyword(s):  
Author(s):  
W. W. Davison ◽  
R. C. Buchanan

Yttria stabilized zirconia (YSZ) has become a significant technological material due to its high ionic conductivity, chemical inertness, and good mechanical properties. Temperatures on the order of 1700°C are required, however, to densify YSZ to the degree necessary for good electrical and mechanical properties. A technique for lowering the densification temperature is the addition of small amounts of material which facilitate the formation of a liquid phase at comparatively low temperatures. In this study, sintered microstructures obtained from the use of Al2O3 as a sintering aid were examined with scanning, transmission, and scanning transmission microscopy (SEM, TEM, and STEM).


2008 ◽  
Vol 591-593 ◽  
pp. 436-440
Author(s):  
João Marcos K. Assis ◽  
Francisco Piorino Neto ◽  
Francisco Cristóvão Lourenço de Melo ◽  
Maria do Carmo de Andrade Nono

A comparative study between alumina added niobia ceramics and two alumina zirconia composites from nanostructured TZP (7% and 14% weight) was made. On this composites the zirconia were yttria stabilized and the alumina were submicron structured. As sintering aid a mixture of magnesia, niobia and talc were used on all samples. The sintering was performed at 1450 oC during 60 minutes. The characteristic grain size and shape of an alumina and zirconia powders, aggregates and agglomerates were characterized. The sintering ceramics were evaluated through hardness, fracture toughness and 4 point bending test. Weibull statistic was applied on the flexural results. Although the fracture toughness result from ZTA were lower, and seems to be affected by the liquid fase, the hardness and Weibull modulus were higher than alumina niobia. The grains size and the homogeneity of its distributions on the microstructure of this ceramics was correlated to these higher values. The results from these alumina zirconia composites showed a potential to apply as a ballistic armor material.


Author(s):  
Yuanye Huang ◽  
Rotraut Merkle ◽  
Joachim Maier

The effects of 0.125-0.2 wt% NiO added as sintering aid for highly refractory Ba(Zr,Ce,Y)O3-δ proton conducting ceramics are investigated. The complex nature of the solid state reactive sintering method shows...


2006 ◽  
Vol 309-311 ◽  
pp. 329-332
Author(s):  
S.H. Ahn ◽  
Yong Nam Kim ◽  
Hyun Gyu Shin ◽  
Hee Soo Lee ◽  
Jong Hee Hwang ◽  
...  

Preparation of bioactive glasses was attempted utilizing waste bovine as raw resource. Bioactive and biodegradable batch compositions in the Na2O-CaO-SiO2 system were included with calcined bovine, whose phase was high-purity oxy-hydroxyapatite. Bovine inclusion as large as 40 mass% was shown to present highly bioactive glasses; bovine in the bioactive and biodegradable compositions presented glasses with controlled bioactivity and biodegradability, respectively. These indicate not only a plenty biological resource of bio-interactive materials, but also an alternative strategy for bioactive glasses with multi-functional applications.


2005 ◽  
Vol 292 (1) ◽  
pp. 152-159 ◽  
Author(s):  
Paweł Maksimowski ◽  
Wincenty Skupiński
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document