THE IMPLEMENTATION OF DIFFERENT SPEED CONTROL METHODS FOR THREE PHASE INDUCTION MOTOR USING MATLAB SIMULATION

The use of mechanical energy in daily life including industries and transport applications are increasing rapidly. Induction motor has special advantages because of less cost, reliable, robust and less maintenance when compared to other motors. It also has special features which satisfies all the requirements. On the whole 3-phase IM (Induction motor) plays major role in several applications (i.e. industrial, mechanical). The meticulous behavior of induction motor modeling and speed control can aid for controlling of machine application where flawless results can be obtained. The major faults in the IM effect the air gap flux, where the mathematical modeling can helpful to estimating the errors obtain while designing the motor. The paper represents the bit by bit implementation of 3-phase induction motor modeling and speed control using MATLAB simulation.

Download Full-text

Matlab Simulation Model Design of Fuzzy Controller based V/F Speed Control of Three Phase Induction Motor

International Journal of Engineering Research and ◽

10.17577/ijertv6is010012 ◽

2016 ◽

Vol V6 (01) ◽

Author(s):

Sharda Dinkar Chande ◽

Pranoti Khanke ◽

Keyword(s):

Simulation Model ◽

Induction Motor ◽

Fuzzy Controller ◽

Speed Control ◽

Model Design ◽

Matlab Simulation ◽

Three Phase

Download Full-text

IMPROVED INDIRECT FIELD-ORIENTED CONTROL OF INDUCTION MOTOR DRIVE BASED PSO ALGORITHM

Jurnal Teknologi ◽

10.11113/jt.v78.8888 ◽

2016 ◽

Vol 78 (6-2) ◽

Author(s):

Jamal Abd Ali ◽

M A Hannan ◽

Azah Mohamed

Keyword(s):

Induction Motor ◽

Speed Control ◽

Pso Algorithm ◽

Pi Controller ◽

Field Oriented Control ◽

Variable Speed ◽

Three Phase ◽

Indirect Field Oriented Control ◽

Speed Response ◽

Variable Speed Control

Optimization techniques are increasingly used in research to improve the control of three-phase induction motor (TIM). Indirect field-oriented control (IFOC) scheme is employed to improve the efficiency and enhance the performance of variable speed control of TIM drives. The space vector pulse width modulation (SVPWM) technique is used for switching signals in a three-phase bridge inverter to minimize harmonics in the output signals of the inverter. In this paper, a novel scheme based on particle swarm optimization (PSO) algorithm is proposed to improve the variable speed control of IFOC in TIM. The PSO algorithm is used to search the best values of parameters of proportional-integral (PI) controller (proportional gain (kp) and integral gain (ki)) for each speed controller and voltage controller to improve the speed response for TIM. An optimal PI controller-based objective function is also used to tune and minimize the mean square error (MSE). Results of all tests verified the robustness of the PSO-PI controller for speed response in terms of damping capability, fast settling time, steady state error, and transient responses under different conditions of mechanical load and speed.

Download Full-text

Automatic Speed Control of a Three Phase Induction Motor by Variable Frequency Drive

Intelligent Electrical Systems: A Step towards Smarter Earth ◽

10.1201/9780429355998-30 ◽

2021 ◽

pp. 277-286

Author(s):

Sayantan Chanda ◽

Chayan Bandopadhyay ◽

Maitreyee Banerjee ◽

Shalini Mondol ◽

Ankur Bhattacharjee

Keyword(s):

Induction Motor ◽

Speed Control ◽

Variable Frequency ◽

Variable Frequency Drive ◽

Three Phase

Download Full-text

Experimental Study of Various Parameters during Speed Control of Three-phase Induction Motor Using GPIC and LabVIEW

Annals of Emerging Technologies in Computing ◽

10.33166/10.33166/aetic.2021.01.005 ◽

2021 ◽

Vol 5 (1) ◽

pp. 51-62

Author(s):

Adnan Ahmed ◽

Abdul Majeed Shaikh ◽

Muhammad Fawad Shaikh ◽

Shoaib Ahmed Shaikh ◽

Jahangir Badar Soomro

Keyword(s):

Induction Motor ◽

Induction Motors ◽

Induction Machine ◽

Speed Control ◽

Industrial Applications ◽

General Purpose ◽

Three Phase ◽

Field Programmable ◽

Input Source ◽

Open Control

Induction motors are widely used from home to industrial applications. Speed of induction motor plays important role, so to control the speed of induction motor various techniques are adopted and one of these techniques is V/F control, which is adopted in this paper. This technique helps to control the speed in open control system in RPM. Moreover, Control is designed in LabVIEW, it is quite helpful to develop the circuit graphically and code is automatically written in the background to run on Field Programmable Gate Array (FPGA). The aim of this research is to study the impacts on diverse parameters during speed control of three phase induction machine with manipulation of GPIC. Solar technology is used as input source to drive the General-Purpose Inverter Controller (GPIC). Apart of this, impacts of modulation index and carrier frequency influencing the active, reactive and apparent power, temperature and power quality and current overshoot is analysed. MATLAB/Simulink and LabVIEW tools are used for simulation and results along with GPIC, Induction motor and solar panel as hardware.

Download Full-text