Interrelationship Between the One-Step and Increment Methods of Determining Diffusivity

1981 ◽  
Vol 45 (5) ◽  
pp. 998-998
Author(s):  
Lyle Prunty
Keyword(s):  
One Step ◽  
The One

A Study on the Rearrangement of Dialkyl 1-Aryl-1-hydroxymethylphosphonates to Benzyl Phosphates

2020 ◽  
Vol 24 (4) ◽  
pp. 465-471 ◽  
Author(s):  
Zita Rádai ◽  
Réka Szabó ◽  
Áron Szigetvári ◽  
Nóra Zsuzsa Kiss ◽  
Zoltán Mucsi ◽  
...  
Keyword(s):  
Quantum Chemical ◽  
Room Temperature ◽  
Phase Transfer ◽  
One Pot ◽  
Substrate Dependence ◽  
Triethylbenzylammonium Chloride ◽  
One Step ◽  
The Pudovik Reaction ◽  
The One ◽  
Solid Liquid

The phospha-Brook rearrangement of dialkyl 1-aryl-1-hydroxymethylphosphonates (HPs) to the corresponding benzyl phosphates (BPs) has been elaborated under solid-liquid phase transfer catalytic conditions. The best procedure involved the use of triethylbenzylammonium chloride as the catalyst and Cs2CO3 as the base in acetonitrile as the solvent at room temperature. The substrate dependence of the rearrangement has been studied, and the mechanism of the transformation under discussion was explored by quantum chemical calculations. The key intermediate is an oxaphosphirane. The one-pot version starting with the Pudovik reaction has also been developed. The conditions of this tandem transformation were the same, as those for the one-step HP→BP conversion.

scholarly journals One-Year Clinical Evaluation of the Bonding Effectiveness of a One-Step, Self-Etch Adhesive in Noncarious Cervical Lesion Therapy

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Babacar Faye ◽  
Mouhamed Sarr ◽  
Khaly Bane ◽  
Adjaratou Wakha Aidara ◽  
Seydina Ousmane Niang ◽  
...  
Keyword(s):  
Clinical Performance ◽  
Retention Rate ◽  
Recall Rate ◽  
Acid Etching ◽  
Significant Difference ◽  
Usphs Criteria ◽  
One Step ◽  
One Year ◽  
The One ◽  
Self Etch

This study evaluated the one-year clinical performance of a one-step, self-etch adhesive (Optibond All-in-One, Kerr, CA, USA) combined with a composite (Herculite XRV Ultra, Kerr Hawe, CA, USA) to restore NCCLs with or without prior acid etching. Restorations performed by the same practitioner were evaluated at baseline and after 3, 6, and 12 months using modified USPHS criteria. At 6 months, the recall rate was 100%. The retention rate was 84.2% for restorations with prior acid etching, but statistically significant differences were observed between baseline and 6 months. Without acid etching, the retention rate was 77%, and no statistically significant difference was noted between 3 and 6 months. Marginal integrity (93.7% with and 87.7% without acid etching) and discoloration (95.3% with and 92.9% without acid etching) were scored as Alpha or Bravo, with better results after acid etching. After one year, the recall rate was 58.06%. Loss of pulp vitality, postoperative sensitivity, or secondary caries were not observed. After one year retention rate was of 90.6% and 76.9% with and without acid conditioning. Optibond All-in-One performs at a satisfactory clinical performance level for restoration of NCCLs after 12 months especially after acid etching.

scholarly journals Building up cyclodextrins from scratch – templated enzymatic synthesis of cyclodextrins directly from maltose

2021 ◽  
Author(s):  
Dennis Larsen ◽  
Sophie R. Beeren
Keyword(s):  
Enzymatic Synthesis ◽  
Combinatorial Libraries ◽  
One Step ◽  
The One ◽  
Kinetic Trapping

Template-induced kinetic trapping of specific cyclodextrins in enzyme-mediated dynamic combinatorial libraries of linear and cyclic α-glucans enables the one-step synthesis of cyclodextrins from maltose in water.

scholarly journals Efficient Cryopreservation of Populus tremula by In Vitro-Grown Axillary Buds and Genetic Stability of Recovered Plants

Plants ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 77
Author(s):  
Elena O. Vidyagina ◽  
Nikolay N. Kharchenko ◽  
Konstantin A. Shestibratov
Keyword(s):  
Survival Rate ◽  
Axillary Buds ◽  
Long Term Storage ◽  
Average Survival ◽  
Transgenic Lines ◽  
Ssr Loci ◽  
One Step ◽  
The One

Axillary buds of in vitro microshoots were successfully frozen at –196 °C by the one-step freezing method using the protective vitrification solution 2 (PVS2). Microshoots were taken from 11 transgenic lines and three wild type lines. Influence of different explant pretreatments were analyzed from the point of their influence towards recovery after cryopreservation. It was found out that the use of axillary buds as explants after removal of the apical one increases recovery on average by 8%. The cultivation on growth medium of higher density insignificantly raises the regenerants survival rate. Pretreatment of the osmotic fluid (OF) shows the greatest influence on the survival rate. It leads to the increase in survival rate by 20%. The cryopreservation technology providing regenerants average survival rate of 83% was developed. It was based on the experimental results obtained with explant pretreatment. Incubation time in liquid nitrogen did not affect the explants survival rate after thawing. After six months cryostorage of samples their genetic variability was analyzed. Six variable simple sequence repeat (SSR) loci were used to analyze genotype variability after the freezing-thawing procedure. The microsatellite analysis showed the genetic status identity of plants after cryopreservation and of the original genotypes. The presence of the recombinant gene in the transgenic lines after cryostorage were confirmed so as the interclonal variation in the growth rate under greenhouse conditions. The developed technique is recommended for long-term storage of various breeding and genetically modified lines of aspen plants, as it provides a high percentage of explants survival with no changes in genotype.

scholarly journals Understanding mathematics of Grover’s algorithm

2021 ◽  
Vol 20 (5) ◽  
Author(s):  
Paweł J. Szabłowski
Keyword(s):  
Phase Change ◽  
Unitary Operator ◽  
Mathematical Structure ◽  
Complex Numbers ◽  
Unitary Operators ◽  
Grover’S Algorithm ◽  
Great Probability ◽  
Grover's Algorithm ◽  
One Step ◽  
The One

AbstractWe analyze the mathematical structure of the classical Grover’s algorithm and put it within the framework of linear algebra over the complex numbers. We also generalize it in the sense, that we are seeking not the one ‘chosen’ element (sometimes called a ‘solution’) of the dataset, but a set of m such ‘chosen’ elements (out of $$n>m)$$ n > m ) . Besides, we do not assume that the so-called initial superposition is uniform. We assume also that we have at our disposal an oracle that ‘marks,’ by a suitable phase change $$\varphi $$ φ , all these ‘chosen’ elements. In the first part of the paper, we construct a unique unitary operator that selects all ‘chosen’ elements in one step. The constructed operator is uniquely defined by the numbers $$\varphi $$ φ and $$\alpha $$ α which is a certain function of the coefficients of the initial superposition. Moreover, it is in the form of a composition of two so-called reflections. The result is purely theoretical since the phase change required to reach this heavily depends on $$\alpha $$ α . In the second part, we construct unitary operators having a form of composition of two or more reflections (generalizing the constructed operator) given the set of orthogonal versors. We find properties of these operations, in particular, their compositions. Further, by considering a fixed, ‘convenient’ phase change $$\varphi ,$$ φ , and by sequentially applying the so-constructed operator, we find the number of steps to find these ‘chosen’ elements with great probability. We apply this knowledge to study the generalizations of Grover’s algorithm ($$m=1,\phi =\pi $$ m = 1 , ϕ = π ), which are of the form, the found previously, unitary operators.

KSeCN as an Efficient Cyanide Source for the One-Step Synthesis of Imino-1-oxoisoindolines via Copper-Promoted C−H Activation

2021 ◽  
pp. 153062
Author(s):  
Yue Zhang ◽  
Xinpeng Liu ◽  
Yanan Wang ◽  
Yinan Zhang ◽  
Junwei Wang ◽  
...  
Keyword(s):  
One Step ◽  
The One

scholarly journals The Photodetectors Based on Lateral Monolayer MoS2/WS2 Heterojunctions

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Caihong Li ◽  
Juntong Zhu ◽  
Wen Du ◽  
Yixuan Huang ◽  
Hao Xu ◽  
...  
Keyword(s):  
Communication Systems ◽  
Transition Metal Dichalcogenides ◽  
Chemical Vapor ◽  
Large Area ◽  
Optical Signals ◽  
Metal Dichalcogenides ◽  
One Step ◽  
The One ◽  
Charge Carrier Trapping ◽  
Sharp Interfaces

AbstractMonolayer transition metal dichalcogenides (TMDs) show promising potential for next-generation optoelectronics due to excellent light capturing and photodetection capabilities. Photodetectors, as important components of sensing, imaging and communication systems, are able to perceive and convert optical signals to electrical signals. Herein, the large-area and high-quality lateral monolayer MoS2/WS2 heterojunctions were synthesized via the one-step liquid-phase chemical vapor deposition approach. Systematic characterization measurements have verified good uniformity and sharp interfaces of the channel materials. As a result, the photodetectors enhanced by the photogating effect can deliver competitive performance, including responsivity of ~ 567.6 A/W and detectivity of ~ 7.17 × 1011 Jones. In addition, the 1/f noise obtained from the current power spectrum is not conductive to the development of photodetectors, which is considered as originating from charge carrier trapping/detrapping. Therefore, this work may contribute to efficient optoelectronic devices based on lateral monolayer TMD heterostructures.

FAST SPRINGBACK SIMULATION OF BENDING FORMING BASED ON ONE-STEP INVERSE ANALYSIS

2008 ◽  
Vol 22 (31n32) ◽  
pp. 6057-6063
Author(s):  
YI-DONG BAO ◽  
WEN-LIANG CHEN ◽  
HONG WU
Keyword(s):  
Sheet Metal Forming ◽  
Metal Forming ◽  
Inverse Analysis ◽  
Simulation Method ◽  
Spring Back ◽  
Deformation Path ◽  
Bending Process ◽  
One Step ◽  
Implicit Solver ◽  
The One

A simplified one-step inverse analysis of sheet metal forming is a suitable tool to simulate the bending forming since the deformation path of bending forming is an approximately proportion one. A fast spring-back simulation method based on one-step analysis is proposed. First, the one-step inverse analysis is applied to obtain the stress distribution at the final stage of bending. Then, the unloading to get a spring back is simulated by LS-DYNA implicit solver. These processes are applied to the unconstrained cylindrical bending and the truck member rail. The spring-back and member rail widths at the several key sections are compared with experimental ones. It is well demonstrated that the proposed method is an effective way to predict the spring-back by unloading after bending process.

Global Reaction Model to Describe the Kinetics of Catalytic Pyrolysis of Coffee Grounds Waste

2017 ◽  
Vol 899 ◽  
pp. 173-178 ◽  
Author(s):  
Ronydes Batista Jr. ◽  
Bruna Sene Alves Araújo ◽  
Pedro Ivo Brandão e Melo Franco ◽  
Beatriz Cristina Silvério ◽  
Sandra Cristina Danta ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Large Scale ◽  
Catalytic Pyrolysis ◽  
Petroleum Products ◽  
Reaction Model ◽  
Heating Rates ◽  
Coffee Grounds ◽  
One Step ◽  
Global Reaction ◽  
The One

In view of the constant search for new sources of renewable energy, the particulate agro-industrial waste reuse emerges as an advantageous alternative. However, despite the advantages of using the biomass as an energy source, there is still strong resistance as the large-scale replacement of petroleum products due to the lack of scientifically proven efficient conversion technologies. In this context, the pyrolysis is presented as one of the most widely used thermal decomposition processes. The knowledge of aspects of chemical kinetics, thermodynamics these will, heat and mass transfer, are so important, since influence the quality of the product. This paper presents a kinetic study of slow pyrolysis of coffee grounds waste from dynamic thermogravimetric experiments (TG), using different powder catalysts. The primary thermal decomposition was described by the one-step reaction model, which considers a single global reaction. The kinetic parameters were estimated using nonlinear regression and the differential evolution method. The coffee ground waste was dried at 105°C for 24 hours. The sample in nature was analyzed at different heating rates, being 10, 15, 20, 30 and 50 K/min. In the catalytic pyrolysis, about 5% (w/w) of catalyst were added to the sample, at a heating rate of 30 K/min. The results show that the one-step model does not accurately represent the data of weight loss (TG) and its derivative (DTG), but can do an estimative of the activation energy reaction, and can show the differences caused by the catalysts. Although no one can say anything about the products formed with the addition of the catalyst, it would be necessary to micro-pyrolysis analysis, we can say the influence of the catalyst in the samples, based on the data obtained in thermogravimetric tests.

Sign in / Sign up

Export Citation Format

Share Document