Optimal Design Parameters of Exhaust Valve Spring in IC Engines Using Metaheuristic Algorithms

2021 ◽  
Author(s):  
A. Arabi ◽  
H. Osman
Keyword(s):  
Optimal Design ◽  
Metaheuristic Algorithms ◽  
Exhaust Valve ◽  
Design Parameters ◽  
Valve Spring ◽  
Ic Engines

Justification of design parameters of the fractional reaping conveyor and its devices for removal of beveled stems from under the wheels of the vehicle

2019 ◽  
Vol 1 (3) ◽  
pp. 1-10
Author(s):  
Mikhail M. Konstantinov ◽  
Ivan N. Glushkov ◽  
Sergey S. Pashinin ◽  
Igor I. Ognev ◽  
Tatyana V. Bedych
Keyword(s):  
Optimal Design ◽  
Technological Process ◽  
Design Parameters ◽  
Theoretical Studies ◽  
Optimal Parameters ◽  
Belt Conveyor ◽  
Grain Crops ◽  
Mode Of Operation ◽  
Optimal Values ◽  
Main Component

In this paper we consider the structural and technological process of the combine used in the process of separate harvesting of grain crops, as well as a number of its parameters. Among the main units of the combine, we allocate a conveyor and devices for removing beveled stems from under the wheels of the vehicle. The principle of operation of the conveyor at different phases of the Reaper and especially the removal of cut stems from under the wheels of the vehicle during operation of the Reaper. The results of theoretical studies on the establishment of the optimal design of the parameters of the belt conveyor are presented, the ranges of their optimal values are considered and determined. Studies on the establishment of optimal parameters of the screw divider in the Reaper, which is the main component of the device for removal of beveled stems, are presented. Taking into account the optimal design and mode of operation of the screw divider, the correct work is provided to remove the cut stems from under the wheels of the harvester.

scholarly journals Optimal Design Parameters for a Phased Array Based Ultrasonic Polar Scan

2021 ◽  
pp. 1-1
Author(s):  
Jannes Daemen ◽  
Arvid Martens ◽  
Mathias Kersemans ◽  
Erik Verboven ◽  
Steven Delrue ◽  
...  
Keyword(s):  
Optimal Design ◽  
Phased Array ◽  
Design Parameters ◽  
Ultrasonic Polar Scan

scholarly journals A Two-Round Optimization Design Method for Aerostatic Spindles Considering the Fluid–Structure Interaction Effect

2021 ◽  
Vol 11 (7) ◽  
pp. 3017
Author(s):  
Qiang Gao ◽  
Siyu Gao ◽  
Lihua Lu ◽  
Min Zhu ◽  
Feihu Zhang
Keyword(s):  
Optimal Design ◽  
Optimization Design ◽  
Design Method ◽  
Fluid Structure Interaction ◽  
Design Procedure ◽  
Design Parameters ◽  
Geometrical Parameters ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Aerostatic Spindle

The fluid–structure interaction (FSI) effect has a significant impact on the static and dynamic performance of aerostatic spindles, which should be fully considered when developing a new product. To enhance the overall performance of aerostatic spindles, a two-round optimization design method for aerostatic spindles considering the FSI effect is proposed in this article. An aerostatic spindle is optimized to elaborate the design procedure of the proposed method. In the first-round design, the geometrical parameters of the aerostatic bearing were optimized to improve its stiffness. Then, the key structural dimension of the aerostatic spindle is optimized in the second-round design to improve the natural frequency of the spindle. Finally, optimal design parameters are acquired and experimentally verified. This research guides the optimal design of aerostatic spindles considering the FSI effect.

Momentum exchange impact damper design methodology for object-wall-collision problems

2017 ◽  
Vol 24 (14) ◽  
pp. 3206-3218
Author(s):  
Yohei Kushida ◽  
Hiroaki Umehara ◽  
Susumu Hara ◽  
Keisuke Yamada
Keyword(s):  
Optimal Design ◽  
Design Methodology ◽  
Design Parameters ◽  
Momentum Exchange ◽  
Impact Damper ◽  
One Dimensional ◽  
Practical Design ◽  
Wall Collision ◽  
Damper Design ◽  
And Control

Momentum exchange impact dampers (MEIDs) were proposed to control the shock responses of mechanical structures. They were applied to reduce floor shock vibrations and control lunar/planetary exploration spacecraft landings. MEIDs are required to control an object’s velocity and displacement, especially for applications involving spacecraft landing. Previous studies verified numerous MEID performances through various types of simulations and experiments. However, previous studies discussing the optimal design methodology for MEIDs are limited. This study explicitly derived the optimal design parameters of MEIDs, which control the controlled object’s displacement and velocity to zero in one-dimensional motion. In addition, the study derived sub-optimal design parameters to control the controlled object’s velocity within a reasonable approximation to derive a practical design methodology for MEIDs. The derived sub-optimal design methodology could also be applied to MEIDs in two-dimensional motion. Furthermore, simulations conducted in the study verified the performances of MEIDs with optimal/sub-optimal design parameters.

Development of High-Speed Response Electromagnetic Linear Actuator Using for Pneumatic Control Valve

2014 ◽  
Vol 532 ◽  
pp. 41-45 ◽  
Author(s):  
Myung Jin Chung
Keyword(s):  
Optimal Design ◽  
Dynamic Characteristics ◽  
High Speed ◽  
Design Method ◽  
Control Valve ◽  
Design Parameters ◽  
Linear Actuator ◽  
Analytic Model ◽  
Electromagnetic Linear Actuator ◽  
Quadratic Programming Method

Analytic model of electromagnetic linear actuator in the function of electric and geometric parameters is proposed and the effects of the design parameters on the dynamic characteristics are analyzed. To improve the dynamic characteristics, optimal design is conducted by applying sequential quadratic programming method to the analytic model. This optimal design method aims to minimize the response time and maximize force efficiency. By this procedure, electromagnetic linear actuator having high-speed characteristics is developed.

Shape-design optimization of hull structures considering thermal deformation

2013 ◽  
Vol 228 (13) ◽  
pp. 2266-2277
Author(s):  
Myung-Jin Choi ◽  
Min-Geun Kim ◽  
Seonho Cho
Keyword(s):  
Optimal Design ◽  
Design Optimization ◽  
Thermal Deformation ◽  
Parametric Design ◽  
Optimization Method ◽  
Optimization Process ◽  
Design Parameters ◽  
Shape Design ◽  
Shape Design Optimization ◽  
Modified Method

We developed a shape-design optimization method for the thermo-elastoplasticity problems that are applicable to the welding or thermal deformation of hull structures. The point is to determine the shape-design parameters such that the deformed shape after welding fits very well to a desired design. The geometric parameters of curved surfaces are selected as the design parameters. The shell finite elements, forward finite difference sensitivity, modified method of feasible direction algorithm and a programming language ANSYS Parametric Design Language in the established code ANSYS are employed in the shape optimization. The objective function is the weighted summation of differences between the deformed and the target geometries. The proposed method is effective even though new design variables are added to the design space during the optimization process since the multiple steps of design optimization are used during the whole optimization process. To obtain the better optimal design, the weights are determined for the next design optimization, based on the previous optimal results. Numerical examples demonstrate that the localized severe deviations from the target design are effectively prevented in the optimal design.

scholarly journals Application of the Fuel-Optimal Energy Management in Design Study of a Parallel Hybrid Electric Vehicle

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Afshin Pedram Pourhashemi ◽  
S. M. Mehdi Ansarey Movahed ◽  
Masoud Shariat Panahi
Keyword(s):  
Optimal Design ◽  
Energy Management ◽  
Management Strategy ◽  
Hybrid Electric Vehicle ◽  
Performance Metrics ◽  
Design Parameters ◽  
Programming Approach ◽  
Energy Management Strategy ◽  
Dynamic Programming Approach ◽  
Dynamic Measures

In spite of occasional criticism they have attracted, hybrid vehicles (HVs) have been warmly welcomed by industry and academia alike. The key advantages of an HV, including fuel economy and environment friendliness, however, depend greatly on its energy management strategy and the way its design parameters are “tuned.” The optimal design and sizing of the HV remain a challenge for the engineering community, due to the variety of criteria and especially dynamic measures related to nature of its working conditions. This paper proposes an optimal design scheme that begins with presenting an energy management strategy based on minimum fuel consumption in finite driving cycle horizon. The strategy utilizes a dynamic programming approach and is consistent with charge sustenance. The sensitivity of the vehicle’s performance metrics to multiple design parameters is then studied using a design of experiments (DOE) methodology. The proposed scheme provides the designer with a reliable tool for investigating various design scenarios and achieving the optimal one.

Configuration Robustness Analysis of the Optimal Design of Cable-Driven Manipulators

2016 ◽  
Vol 8 (6) ◽  
Author(s):  
Joshua T. Bryson ◽  
Xin Jin ◽  
Sunil K. Agrawal
Keyword(s):  
Optimal Design ◽  
Stochastic Optimization ◽  
High Dimension ◽  
Degrees Of Freedom ◽  
Robustness Analysis ◽  
Optimal Solution ◽  
Design Parameters ◽  
Robot Leg ◽  
Robot Performance

Designing an effective cable architecture for a cable-driven robot becomes challenging as the number of cables and degrees of freedom of the robot increase. A methodology has been previously developed to identify the optimal design of a cable-driven robot for a given task using stochastic optimization. This approach is effective in providing an optimal solution for robots with high-dimension design spaces, but does not provide insights into the robustness of the optimal solution to errors in the configuration parameters that arise in the implementation of a design. In this work, a methodology is developed to analyze the robustness of the performance of an optimal design to changes in the configuration parameters. This robustness analysis can be used to inform the implementation of the optimal design into a robot while taking into account the precision and tolerances of the implementation. An optimized cable-driven robot leg is used as a motivating example to illustrate the application of the configuration robustness analysis. Following the methodology, the effect on robot performance due to design variations is analyzed, and a modified design is developed which minimizes the potential performance degradations due to implementation errors in the design parameters. A robot leg is constructed and is used to validate the robustness analysis by demonstrating the predicted effects of variations in the design parameters on the performance of the robot.

Simultaneous Optimal Design of the Lyapunov-Based Semi-Active Control and the Semi-Active Vibration Control Device: Inverse Lyapunov Approach

2010 ◽  
Author(s):  
Kazuhiko Hiramoto ◽  
Taichi Matsuoka ◽  
Akira Fukukita ◽  
Katsuaki Sunakoda
Keyword(s):  
Optimal Design ◽  
Lyapunov Function ◽  
Vibration Control ◽  
Active Control ◽  
Control Device ◽  
Ball Screw ◽  
Design Parameters ◽  
Resistance Force ◽  
Control Law ◽  
Lyapunov Approach

We address a simultaneous optimal design problem of a semi-active control law and design parameters in a vibration control device for civil structures. The Vibration Control Device (VCD) that is being developed by authors is used as the semi-active control device in the present paper. The VCD is composed of a mechanism of a ball screw with a flywheel for the inertial resistance force and an electric motor with an electric circuit for the damping resistance force. A new bang-bang type semi-active control law referred to as Inverse Lyapunov Approach is proposed as the semi-active control law. In the Inverse Lyapunov Approach the Lyapunov function is searched so that performance measures in structural vibration control are optimized in the premise of the bang-bang type semi-active control based on the Lyapunov function. The design parameters to determine the Lyapunov function and the design parameters of the VCD are optimized for the good performance of the semi-active control system. The Genetic Algorithm is employed for the optimal design.

Kinetostatic backflip strategy for self-recovery of quadruped robots with the selected rotation axis

Robotica ◽  
2021 ◽  
pp. 1-19
Author(s):  
Shengjie Wang ◽  
Kun Wang ◽  
Chunsong Zhang ◽  
Jian S Dai
Keyword(s):  
Optimal Design ◽  
Energy Analysis ◽  
Rotation Axis ◽  
Low Cost ◽  
Minimum Energy ◽  
Design Parameters ◽  
Quadruped Robots ◽  
Design Idea ◽  
The Relationship

Abstract A kinetostatic approach applied to the design of a backflip strategy for quadruped robots is proposed in this paper. Inspired by legged animals and taking the advantage of the leg workspace, this strategy provides an optimal design idea for the low-cost quadruped robots to achieve self-recovery after overturning. Through kinetostatic and energy analysis, a four-stepped backflip strategy based on the selected rotation axis with minimum energy is proposed, with a process of selection, lifting, rotating, and protection. The kinematic factors that affect the backflip are investigated, along with the relationship between the design parameters of the leg and trunk being analyzed. At the end of this paper, the strategy is validated by a simulation and experiments with a prototype called DRbot, demonstrating that the strategy endows the robot a strong self-recovery ability in various terrains.

Sign in / Sign up

Export Citation Format

Share Document