scholarly journals Formulation, characterization and evaluation of nanoparticles based dry powder insufflation containing terbutaline sulphate and itraconazole for the treatment of asthma

2020 ◽  
Vol 11 (1) ◽  
pp. 567-580
Author(s):  
Venugopalaiah Penabaka ◽  
Kumar B ◽  
Prasad N.B.L
Keyword(s):  
Particle Size ◽  
Size Distribution ◽  
Bronchial Asthma ◽  
Spherical Particles ◽  
Dry Powder ◽  
Terbutaline Sulphate ◽  
Release Studies ◽  
Physical Mixing ◽  
Spray Dried

Many factors affect the pulmonary drug delivery and stability of the nanoparticles an acupuncture consisting of bronchial asthma. Present research envisages on the development of dry powder nanoparticles as insufflation a acupuncture consisting of bronchial asthma (allergy due to Aspergillus fumigatus) using physical mixing and spray drying. Different founding are prepared and characterized with suitable excipients like lactose and trehalose. The particle size distribution of nano milled and spray-dried particles of Terbutaline Sulphate and Itraconazole showed unimodal size distribution. The formulations prepared with trehalose as the carrier showed less Dv90, Dv50 and Dv10 values due to the fineness in the particles of trehalose when compared to lactose. The Dv50  and Dv10 values were in the range of mountains of 0.43-0.89 µm and 0.21–0.49 µm for all formulations, which shows the primary particle size in the nanometer scale. Smooth and nearly spherical particles were produced for spray-dried formulations when compared to milled formulations. Zeta potential comes across until be between +17±0.13 to +32±0.12, which explains the particles as moderately stable. MMAD values ranges from 3.19 µm to 4.78 µm for milled nanoparticles and 3.45 µm to 4.21 µm for spray-dried particles. Formulated nanoparticles exhibited good spreading properties, which will allow all the particles to deposition palmy profusion territories consisting of the lung. In-vitro drug release studies explains that spray-dried formulations of Terbutaline sulpahte and Itraconazole using lactose as excipients released the drug upto 98.9% and 99.1% in 180mts.

Optimization and Characterization of Aqueous Micellar Formulations for Ocular Delivery of an Antifungal Drug, Posaconazole

2020 ◽  
Vol 26 (14) ◽  
pp. 1543-1555 ◽  
Author(s):  
Meltem E. Durgun ◽  
Emine Kahraman ◽  
Sevgi Güngör ◽  
Yıldız Özsoy
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Size Distribution ◽  
Encapsulation Efficiency ◽  
Fungal Infections ◽  
In Vitro Release ◽  
Pluronic F127 ◽  
Glycol Succinate ◽  
Vitro Release

Background: Topical therapy is preferred for the management of ocular fungal infections due to its superiorities which include overcoming potential systemic side effects risk of drugs, and targeting of drugs to the site of disease. However, the optimization of effective ocular formulations has always been a major challenge due to restrictions of ocular barriers and physiological conditions. Posaconazole, an antifungal and highly lipophilic agent with broad-spectrum, has been used topically as off-label in the treatment of ocular fungal infections due to its highly lipophilic character. Micellar carriers have the potential to improve the solubility of lipophilic drugs and, overcome ocular barriers. Objective: In the current study, it was aimed optimization of posaconazole loaded micellar formulations to improve aqueous solubility of posaconazole and to characterize the formulations and to investigate the physical stability of these formulations at room temperature (25°C, 60% RH), and accelerated stability (40°C, 75% RH) conditions. Method: Micelles were prepared using a thin-film hydration method. Pre-formulation studies were firstly performed to optimize polymer/surfactant type and to determine their concentration in the formulations. Then, particle size, size distribution, and zeta potential of the micellar formulations were measured by ZetaSizer Nano-ZS. The drug encapsulation efficiency of the micelles was quantified by HPLC. The morphology of the micelles was depicted by AFM. The stability of optimized micelles was evaluated in terms of particle size, size distribution, zeta potential, drug amount and pH for 180 days. In vitro release studies were performed using Franz diffusion cells. Results: Pre-formulation studies indicated that single D-ɑ-tocopheryl polyethylene glycol succinate (TPGS), a combination of it and Pluronic F127/Pluronic F68 are capable of formation of posaconazole loaded micelles at specific concentrations. Optimized micelles with high encapsulation efficiency were less than 20 nm, approximately neutral, stable, and in aspherical shape. Additionally, in vitro release data showed that the release of posaconazole from the micelles was higher than that of suspension. Conclusion: The results revealed that the optimized micellar formulation of posaconazole offers a potential approach for topical ocular administration.

In Vitro Estimation of Photo-Protective Potential of Pomegranate Seed Oil and Development of a Nanoformulation

2019 ◽  
Vol 15 (1) ◽  
pp. 87-102 ◽  
Author(s):  
Surbhi Dhawan ◽  
Sanju Nanda
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Seed Oil ◽  
Topical Delivery ◽  
Inflammatory Activity ◽  
Pomegranate Seed Oil ◽  
Protective Potential ◽  
Release Studies ◽  
Pomegranate Seed

Background: Since ancient times, people have been using natural resources for photoprotection purposes. One such highly recognised natural agent is pomegranate seed oil, considered as wonder oil owing to the presence of several beneficial phytoconstituents. </P><P> Objective: The study aimed to establish the photoprotective potential of pomegranate seed oil through various in vitro and biochemical studies along with the formation of nanoemulsion, an efficient topical delivery system for the oil. </P><P> Method: Photo-protective potential of the oil was estimated by determining in vitro antioxidant and anti-inflammatory activity, total phenolic content, anti elastase, antihyaluronidase and anticollagenase activities of the oil. Ultrasonication method was used to formulate nanoemulsions. The optimisation was done following the central composite design. The characterisation was done by particle size analysis, zeta potential, polydispersity index, pH, viscosity, stability testing and transmission electron microscopy. The optimised nanoemulsion was loaded into a gel base for topical application and further release studies were carried out. </P><P> Results: The IC50 values of anti-elastase, anti-collagenase and anti-hyaluronidase were found to be 309 mg/ml, 4 mg/ml and 95 mg/ml respectively. The results of anti-oxidant and anti-inflammatory activity were also significant, which thereby established the photo-protective potential of the oil. The optimum batch 2 had particle size 83.90 nm, 0.237 PDI and -5.37 mV zeta potential. The morphology was confirmed by TEM. Batch 2 was incorporated into a gel base and release studies showed 74.12 % release within 7 hours. </P><P> Conclusion: Pomegranate seed oil possesses a potential photo-protective ability. Nanoemulsions proved to be a promising carrier for the topical delivery of the oil.

scholarly journals Development of nitazoxanide-loaded colon-targeted formulation for intestinal parasitic infections: centre composite design-based optimization and characterization

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Charu Bharti ◽  
Upendra Nagaich ◽  
Jaya Pandey ◽  
Suman Jain ◽  
Neha Jain
Keyword(s):  
Particle Size ◽  
Desirability Function ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Percentage Yield ◽  
Vitro Release ◽  
Selection Of

Abstract Background The current investigation is focused on the development and characterization of Eudragit S100 coated nitazoxanide-loaded microbeads as colon-targeted system utilizing central composite design (CCD) and desirability function. The study initiated with the selection of a BCS class II drug nitazoxanide and its preformulation screening with excipients, selection of polymer and identification of concentration for CCD, selection of optimized formulation based on desirability function, and in vitro release studies in simulated gastric and colonic media and stability studies. A two-factor, three-level CCD was employed with two independent variables, i.e. X1 (chitosan % w/v) and X2 (sodium tripolyphosphate % w/v), and three dependent variables, i.e. Y1 (particle size in micrometres), Y2 (percentage yield) and Y3 (percent entrapment efficiency), were chosen. Additionally, surface morphology, mucoadhesion and in vitro drug release studies were also conducted. Result Chitosan concentration showing maximum entrapment and optimum particle size was selected to formulate chitosan beads. The polynomial equation and model graphs obtained from the Design-Expert were utilized to examine the effect of independent variables on responses. The effect of formulation composition was found to be significant (p ˂ 0.05). Based on the desirability function, the optimized formulation was found to have 910.14 μm ± 1.03 particle size, 91.84% ± 0.64 percentage yield and 84.75% ± 0.38 entrapment efficiency with a desirability of 0.961. Furthermore, the formulations were characterized for in vitro drug release in simulated colonic media (2% rat caecal content) and have shown a sustained release of ∼ 92% up to 24 h as compared to in vitro release in simulated gastric fluid. Conclusion The possibility of formulation in enhancing percentage yield and entrapment efficiency of nitazoxanide and the utilization of CCD helps to effectively integrate nitazoxanide microbeads into a potential pharmaceutical dosage form for sustained release.

scholarly journals Formulation and characterization of flurbiprofen loaded microsponge based gel for sustained drug delivery

2019 ◽  
Vol 10 (4) ◽  
pp. 2765-2776
Author(s):  
Naresh Kshirasagar ◽  
Goverdhan Puchchakayala ◽  
Balamurgan K
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Diffusion Method ◽  
Skin Delivery ◽  
Sustained Action ◽  
Release Studies ◽  
Ft Ir ◽  
Polymer Ratio

The new investigation in this present work is to develop microsponges constructed novel drug delivery system for sustained action of Flurbiprofen. Quai-emulsion solvent diffusion method was engaged using Ethyl cellulose and Eudragit RS100 with drug: polymer ratio for development of microsponges. For optimization purposes, several factors are considered in the investigation. Several evaluation studies for the formed microsponges were carried out FT-IR, SEM, DSC, X-RD, particle size analysis, morphology, drug loading and In vitro drug release studies were carried out. Finally, it was concluded that there is no drug-polymer interaction as per DSC & FT-IR. Encapsulation efficiency, particle size and drug content showed a higher impact on alteration of drug-polymer ratio. SEM studies showed that morphological microsponges are spherical and porous in nature and with the mean particle size of 38.86 μm. The gel loaded with microsponges, were followed by In vitro and Ex vivo drug release studies by modified Franz diffusion cell. Skin delivery of optimized formulation enhanced the drug residence time and maintained therapeutic concentration for an extended period of time, which is possible to show sustained action of the drug.

Prediction of Packing Density of Milled Powder Based on Packing Simulation and Particle Shape Analysis

2007 ◽  
Vol 534-536 ◽  
pp. 1621-1624
Author(s):  
Yuto Amano ◽  
Takashi Itoh ◽  
Hoshiaki Terao ◽  
Naoyuki Kanetake
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Shape Analysis ◽  
Packing Density ◽  
Particle Shape ◽  
Milled Powder ◽  
Spherical Particles ◽  
Nonspherical Particles ◽  
Property Control

For precise property control of sintered products, it is important to know the powder characteristics, especially the packing density of the powder. In a previous work, we developed a packing simulation program that could make a packed bed of spherical particles having particle size distribution. In order to predict the packing density of the actual powder that consisted of nonspherical particles, we combined the packing simulation with a particle shape analysis. We investigated the influence of the particle size distribution of the powder on the packing density by executing the packing simulation based on particle size distributions of the actual milled chromium powders. In addition, the influence of the particle shape of the actual powder on the packing density was quantitatively analyzed. A prediction of the packing density of the milled powder was attempted with an analytical expression between the particle shape of the powder and the packing simulation. The predicted packing densities were in good agreement with the actual data.

scholarly journals Development of an Innovative, Carrier-Based Dry Powder Inhalation Formulation Containing Spray-Dried Meloxicam Potassium to Improve the In Vitro and In Silico Aerodynamic Properties

Pharmaceutics ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 535 ◽  
Author(s):  
Edit Benke ◽  
Árpád Farkas ◽  
Piroska Szabó-Révész ◽  
Rita Ambrus
Keyword(s):  
In Silico ◽  
Chronic Obstructive ◽  
Dry Powder Inhalation ◽  
Dry Powder ◽  
Aerodynamic Properties ◽  
Drug Concentrations ◽  
Anti Inflammatory ◽  
New Formulation ◽  
Spray Dried

Most of the marketed dry powder inhalation (DPI) products are traditional, carrier-based formulations with low drug concentrations deposited in the lung. However, due to their advantageous properties, their development has become justified. In our present work, we developed an innovative, carrier-based DPI system, which is an interactive physical blend of a surface-modified carrier and a spray-dried drug with suitable shape and size for pulmonary application. Meloxicam potassium, a nonsteroidal anti-inflammatory drug (NSAID), was used as an active ingredient due to its local anti-inflammatory effect and ability to decrease the progression of cystic fibrosis (CF) and chronic obstructive pulmonary disease (COPD). The results of the in vitro and in silico investigations showed high lung deposition in the case of this new formulation, confirming that the interparticle interactions were changed favorably.

scholarly journals Effect of Bread Structure and In Vitro Oral Processing Methods in Bolus Disintegration and Glycemic Index

Nutrients ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 2105 ◽  
Author(s):  
Aleixandre ◽  
Benavent-Gil ◽  
Rosell
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Glycemic Index ◽  
Starch Hydrolysis ◽  
Wheat Bread ◽  
Processing Methods ◽  
Intestinal Phase ◽  
Oral Processing

The growing interest in controlling the glycemic index of starchy-rich food has encouraged research about the role of the physical structure of food. The aim of this research was to understand the impact of the structure and the in vitro oral processing methods on bolus behavior and starch hydrolysis of wheat bread. Two different bread structures (loaf bread and bread roll) were obtained using different shaping methods. Starch hydrolysis during in vitro oro-gastro-intestinal digestion using the INFOGEST protocol was analyzed and oral processing was simulated by applying two different disintegration processes (basic homogenizer, crystal balls). The bread structure, and thus the shaping method during breadmaking, significantly affected the bolus particle size during all digestion stages. The different in vitro oral processing methods affected the bolus particle sizes after the oral phase in both breads, but they affected the particle size distribution after the gastric and intestinal phase only in the case of loaf bread. Aggregates were observed in the gastric phase, which were significantly reduced in the intestinal phase. When simulated oral processing with crystal balls led to bigger particle size distribution, bread rolls presented the highest in vitro starch hydrolysis. The type of in vitro oral processing allowed discrimination of the performance of the structures of the two breads during starch hydrolysis. Overall, crumb structure significantly affected texture properties, but also had a significant impact on particle size during digestion and starch digestibility.

Sign in / Sign up

Export Citation Format

Share Document