scholarly journals Study on the Residual Stress Relieving Mechanism of C/C Composite-Nb Brazed Joint by Employing a Structurally Optimized Graphene Reinforced Cu Foam Interlayer

2021 ◽  
Vol 8 ◽  
Author(s):  
Hongliang Li ◽  
Zeyu Wang ◽  
Hassaan Ahmad Butt ◽  
Maocheng Ye ◽  
Hao Chen ◽  
...  
Keyword(s):  
Residual Stress ◽  
Experimental Studies ◽  
Homogeneous Distribution ◽  
Interfacial Structures ◽  
Foam Composite ◽  
Stress Relieving ◽  
Brazed Joints ◽  
Brazed Joint ◽  
The Impact ◽  
Cu Foam

Cu foam has previously been investigated and verified to be an excellent interlayer candidate for relieving high residual stress within C/C composite-Nb brazed joints. However, the optimized geometric structure of Cu foam for brazing has never been properly investigated since it was always employed as a reactant for acquiring homogeneous distribution of the interfacial structures in the brazed joints. In this work, graphene reinforced Cu foam composite (G-Cuf) interlayers were used for brazing C/C composite and Nb. Through the protection effect of graphene on the Cu foam substrate, the impact of porosity and thickness of a structurally intact Cu foam on the joint structure and properties were investigated by finite elemental analysis as well as through experimental studies. By introducing a G-Cuf interlayer with an optimized porosity of 90% and thickness of 0.15 mm, the shear strength of the C/C composite-Nb brazed joint reached 45 MPa, which is 3.5 times higher than that of the joint brazed directly without an interlayer. The strain energy of the brazed joint assisted by G-Cuf interlayer reduced from as high as 10.98 × 10–6 J to 6.90 × 10–6 J, suggesting that the residual stress was effectively mitigated.

scholarly journals Effect of Centrifugal Shot Peening on the Surface Properties of Laser-Cut C45 Steel Parts

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3635 ◽  
Author(s):  
Agnieszka Skoczylas ◽  
Kazimierz Zaleski
Keyword(s):  
Residual Stress ◽  
Surface Layer ◽  
Shot Peening ◽  
Experimental Studies ◽  
Combustion Products ◽  
Stress Distributions ◽  
Machining Center ◽  
Fold Reduction ◽  
Stress Layer ◽  
The Impact

This article presents the results of experimental studies of the impact of centrifugal shot peening parameters on the roughness, microstructure, and microhardness of the surface layer of laser-cut C45 steel parts. Residual stress distributions and the presence of iron oxides on the surface of these elements were also examined. Centrifugal shot peening tests were performed on an FV-580a vertical machining center while using a specially designed peening head. The parameters that were varied during centrifugal shot peening included tangential speed of the tool vg and feed rate vf. The use of centrifugal shot peening for finish machining of laser-cut C45 steel parts allowed for obtaining a four-fold reduction in the surface roughness parameters Ra and Rz. As a result of shot peening, the geometrical structure of the surface of the steel parts was modified and it acquired new beneficial features, such as large values of the rounding radii of the micropeaks and high material ratios (Rmrmax = 92%). At the same time, the surface layer was hardened (microhardness increased by 16%) and a compressive residual stress layer was produced on the surface of the workpieces. Additionally, as the shot impacted the processed surface, combustion products were “blasted” or “sheared” off it. Shot peening using the proposed technique can be successfully performed while using CNC machines.

Residual stresses in the aluminium alloy 2014A subject to PAG quenching and vibratory stress relief

2021 ◽  
pp. 030932472110053
Author(s):  
Jeremy S Robinson ◽  
M Sayeed Hossain ◽  
Christopher E Truman
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Aluminium Alloy ◽  
Cold Water ◽  
Stress Relief ◽  
Industry Standard ◽  
Heat Treated ◽  
Stress Relieving ◽  
Polyalkylene Glycol ◽  
The Impact

Generic hollow pump bodies made from aluminium alloy 2014A forgings have been solution heat treated and quenched into either cold water or polyalkylene glycol (PAG) solutions. An industry standard PAG type synthetic quenchant was evaluated, and the influence of two concentrations of the PAG solution on residual stress in the pump bodies was characterised, using neutron and X-ray diffraction. These residual stresses were then compared to those resulting after a pump in the as quenched condition was subject to a widely known but controversial commercial vibratory stress relieving procedure. The use of neutron diffraction allowed the through thickness residual stresses to be evaluated in the pumps. Results demonstrate that PAG quenching is highly effective at significantly reducing residual stress when compared to cold water quenching, but the impact is non uniform and cannot be simply quantified. In this investigation, we prove the effect of vibratory stress relief is negligible, and much less than that achieved by PAG quenching.

Воздействиеультразвуковогополянадинамическуювязкостьводы

2019 ◽  
pp. 27-29
Author(s):  
P. Vikulin ◽  
K. Khlopov ◽  
M. Cherkashin
Keyword(s):  
Dynamic Viscosity ◽  
Experimental Studies ◽  
Ultrasonic Field ◽  
Maximum Effect ◽  
Ultrasonic Frequency ◽  
Ultrasonic Vibrations ◽  
Wastewater Disposal ◽  
Laboratory Setup ◽  
Sonic Treatment ◽  
The Impact

Enhancing water purification processes is provided by various methods including physical ones, in particular, exposure to ultrasonic vibrations. The change in the dynamic viscosity of water affects the rate of deposition of particles in the aquatic environment which can be used in natural and wastewater treatment. At the Department Water Supply and Wastewater Disposal of the National Research Moscow State University of Civil Engineering experimental studies were conducted under laboratory conditions to study the effect of ultrasound on the change in the dynamic viscosity of water. A laboratory setup has been designed consisting of an ultrasonic frequency generator of the relative intensity, a transducer (concentrator) that transmits ultrasonic vibrations to the source water, and sonic treatment tanks. Experimental studies on the impact of the ultrasonic field in the cavitation mode on the dynamic viscosity of the aqueous medium were carried out the exposure time was obtained to achieve the maximum effect.Интенсификация процессов очистки воды осуществляется с помощью различных методов, в том числе и физических, в частности воздействием ультразвуковых колебаний. Изменение динамической вязкости воды влияет на скорость осаждения частиц в водной среде, что может быть использовано в процессах очистки природных и сточных вод. На кафедре Водоснабжение и водоотведение Национального исследовательского Московского государственного строительного университета в лабораторных условиях проведены экспериментальные исследования по изучению влияния ультразвука на изменение динамической вязкости воды. Разработана схема лабораторной установки, состоящая из генератора ультразвуковых частот с соответствующей интенсивностью, преобразователя (концентратора), передающего ультразвуковые колебания в исходную воду, и емкости для озвучивания. Выполнены экспериментальные исследования по влиянию ультразвукового поля в режиме кавитации на динамическую вязкость водной среды, получено время экспозиции для достижения максимального эффекта.

Family Influences on Youth Offending

2018 ◽  
pp. 377-403
Author(s):  
Abigail A. Fagan ◽  
Kristen M. Benedini
Keyword(s):  
Life Course ◽  
Family Environment ◽  
Parenting Practices ◽  
Experimental Studies ◽  
The United States ◽  
Parental Violence ◽  
Youth Delinquency ◽  
The Impact ◽  
Children’S Exposure

This chapter reviews the degree to which empirical evidence demonstrates that families influence youth delinquency. Because they are most likely to be emphasized in life-course theories, this chapter focuses on parenting practices such as parental warmth and involvement, supervision and discipline of children, and child maltreatment. It also summarizes literature examining the role of children's exposure to parental violence, family criminality, and young (teenage) parents in affecting delinquency. Because life-course theories are ideally tested using longitudinal data, which allow examination of, in this case, the impact of parenting practices on children's subsequent behaviors, this chapter focuses on evidence generated from prospective studies conducted in the United States and other countries. It also discusses findings from experimental studies designed to reduce youth substance use and delinquency by improving the family environment.

scholarly journals Anthropomorphic Strategies Promote Wildlife Conservation through Empathy: The Moderation Role of the Public Epidemic Situation

2021 ◽  
Vol 18 (7) ◽  
pp. 3565
Author(s):  
Dan Yue ◽  
Zepeng Tong ◽  
Jianchi Tian ◽  
Yang Li ◽  
Linxiu Zhang ◽  
...  
Keyword(s):  
College Students ◽  
Behavioral Intention ◽  
Wildlife Conservation ◽  
Negative Emotion ◽  
Public Awareness ◽  
Negative Emotions ◽  
Experimental Studies ◽  
Wildlife Trade ◽  
Illegal Wildlife Trade ◽  
The Impact

The global illegal wildlife trade directly threatens biodiversity and leads to disease outbreaks and epidemics. In order to avoid the loss of endangered species and ensure public health security, it is necessary to intervene in illegal wildlife trade and promote public awareness of the need for wildlife conservation. Anthropomorphism is a basic and common psychological process in humans that plays a crucial role in determining how a person interacts with other non-human agents. Previous research indicates that anthropomorphizing nature entities through metaphors could increase individual behavioral intention of wildlife conservation. However, relatively little is known about the mechanism by which anthropomorphism influences behavioral intention and whether social context affects the effect of anthropomorphism. This research investigated the impact of negative emotions associated with a pandemic situation on the effectiveness of anthropomorphic strategies for wildlife conservation across two experimental studies. Experiment 1 recruited 245 college students online and asked them to read a combination of texts and pictures as anthropomorphic materials. The results indicated that anthropomorphic materials could increase participants’ empathy and decrease their wildlife product consumption intention. Experiment 2 recruited 140 college students online and they were required to read the same materials as experiment 1 after watching a video related to epidemics. The results showed that the effect of wildlife anthropomorphization vanished if participants’ negative emotion was aroused by the video. The present research provides experimental evidence that anthropomorphic strategies would be useful for boosting public support for wildlife conservation. However, policymakers and conservation organizations must be careful about the negative effects of the pandemic context, as the negative emotions produced by it seems to weaken the effectiveness of anthropomorphic strategies.

scholarly journals Image Statistics Preserving Encrypt-then-Compress Scheme Dedicated for JPEG Compression Standard

Entropy ◽  
2021 ◽  
Vol 23 (4) ◽  
pp. 421
Author(s):  
Dariusz Puchala ◽  
Kamil Stokfiszewski ◽  
Mykhaylo Yatsymirskyy
Keyword(s):  
Statistical Analysis ◽  
Image Encryption ◽  
Experimental Studies ◽  
Quality Measures ◽  
Input Image ◽  
Jpeg Compression ◽  
Image Statistics ◽  
Compression Stage ◽  
Wide Range ◽  
The Impact

In this paper, the authors analyze in more details an image encryption scheme, proposed by the authors in their earlier work, which preserves input image statistics and can be used in connection with the JPEG compression standard. The image encryption process takes advantage of fast linear transforms parametrized with private keys and is carried out prior to the compression stage in a way that does not alter those statistical characteristics of the input image that are crucial from the point of view of the subsequent compression. This feature makes the encryption process transparent to the compression stage and enables the JPEG algorithm to maintain its full compression capabilities even though it operates on the encrypted image data. The main advantage of the considered approach is the fact that the JPEG algorithm can be used without any modifications as a part of the encrypt-then-compress image processing framework. The paper includes a detailed mathematical model of the examined scheme allowing for theoretical analysis of the impact of the image encryption step on the effectiveness of the compression process. The combinatorial and statistical analysis of the encryption process is also included and it allows to evaluate its cryptographic strength. In addition, the paper considers several practical use-case scenarios with different characteristics of the compression and encryption stages. The final part of the paper contains the additional results of the experimental studies regarding general effectiveness of the presented scheme. The results show that for a wide range of compression ratios the considered scheme performs comparably to the JPEG algorithm alone, that is, without the encryption stage, in terms of the quality measures of reconstructed images. Moreover, the results of statistical analysis as well as those obtained with generally approved quality measures of image cryptographic systems, prove high strength and efficiency of the scheme’s encryption stage.

scholarly journals Ethanol/Gasoline Blends as Alternative Fuel in Last Generation Spark-Ignition Engines: A Review on CO and HC Engine Out Emissions

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4034
Author(s):  
Paolo Iodice ◽  
Massimo Cardone
Keyword(s):  
Physicochemical Properties ◽  
Alternative Fuels ◽  
Experimental Studies ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
The Impact

Among the alternative fuels existing for spark-ignition engines, ethanol is considered worldwide as an important renewable fuel when mixed with pure gasoline because of its favorable physicochemical properties. An in-depth and updated investigation on the issue of CO and HC engine out emissions related to use of ethanol/gasoline fuels in spark-ignition engines is therefore necessary. Starting from our experimental studies on engine out emissions of a last generation spark-ignition engine fueled with ethanol/gasoline fuels, the aim of this new investigation is to offer a complete literature review on the present state of ethanol combustion in last generation spark-ignition engines under real working conditions to clarify the possible change in CO and HC emissions. In the first section of this paper, a comparison between physicochemical properties of ethanol and gasoline is examined to assess the practicability of using ethanol as an alternative fuel for spark-ignition engines and to investigate the effect on engine out emissions and combustion efficiency. In the next section, this article focuses on the impact of ethanol/gasoline fuels on CO and HC formation. Many studies related to combustion characteristics and exhaust emissions in spark-ignition engines fueled with ethanol/gasoline fuels are thus discussed in detail. Most of these experimental investigations conclude that the addition of ethanol with gasoline fuel mixtures can really decrease the CO and HC exhaust emissions of last generation spark-ignition engines in several operating conditions.

scholarly journals Numerical Investigation on the Ultimate Strength of Box Beams with Impact Damage

2020 ◽  
Author(s):  
Wei Xu ◽  
C. Guedes Soares
Keyword(s):  
Residual Stress ◽  
Ultimate Strength ◽  
Impact Damage ◽  
Ship Hulls ◽  
Four Point Bending ◽  
Impact Location ◽  
Box Beam ◽  
Box Beams ◽  
Fracture Damage ◽  
The Impact

AbstractThe objective of this paper is to study the residual ultimate strength of box beams with impact-induced damage, as a model of what may occur in ship hulls. The bottom and side plates of ship hulls can suffer denting or fracture damage due to grounding, collision and other contacts during the ship’s service life and these impact-induced damages could result in considerable strength degradation. Box beams are firstly subjected to impact loading and then four-point bending loading is imposed on the damaged structures to assess the residual strength using ANSYS/LS_DYNA. The ultimate moment and collapse modes are discussed considering the effect of impact location. The impact-induced deformation is introduced in the four-point bending simulation, and the impact-induced stress is included or not to determine the effect of residual stress and distortion after impact. It is shown that impact location has significant influence on the residual ultimate bending moment of the damaged box beam providing that the impact energy is kept constant. The collapse modes also change when the impactor strikes on different locations. Damaged hard corner and inclined neutral axes might explain the reduction of ultimate strength and diverse collapse modes. The residual stress in the box beam after impact may increase or decrease the ultimate strength depending on impact location.

scholarly journals Between Level Up and Game Over: A Systematic Literature Review of Gamification in Education

2021 ◽  
Vol 13 (4) ◽  
pp. 2247 ◽  
Author(s):  
Ana Manzano-León ◽  
Pablo Camacho-Lazarraga ◽  
Miguel A. Guerrero ◽  
Laura Guerrero-Puerta ◽  
José M. Aguilar-Parra ◽  
...  
Keyword(s):  
Systematic Review ◽  
Academic Performance ◽  
Game Design ◽  
Learning Strategy ◽  
Experimental Studies ◽  
Quasi Experimental ◽  
Current Lines ◽  
Meta Analyses ◽  
Game Elements ◽  
The Impact

Educational gamification consists of the use of game elements and game design techniques in the educational context. The objective of this study is to examine the existing evidence on the impact of educational gamification on student motivation and academic performance in the last five years in order to analyze its distribution over time, educational level, variables, and most used game elements, and know the advantages of its implementation in the classroom. For this, a systematic review is proposed through the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) methodology in three multidisciplinary databases, through an exhaustive search with inclusion and exclusion criteria on quantitative experimental studies that explore gamification in educational centers, which provide information about the most current lines of research. Fourteen studies were included in this review. These used experimental or quasi-experimental designs. Most of them report gamification as a valid learning strategy. The results support the conclusion that educational gamification has a potential impact on the academic performance, commitment, and motivation of students. Therefore, this study implies the need to expand research on the needs and challenges of students when learning with gamified techniques.

scholarly journals Experimental studies on the possibility of using a pulsed laser for spot welding of thin metallic foils

2020 ◽  
Vol 10 (1) ◽  
pp. 674-680
Author(s):  
Piotr Sęk
Keyword(s):  
Experimental Studies ◽  
Pulsed Laser ◽  
Welding Process ◽  
Pulse Mode ◽  
Weld Strength ◽  
Spot Welds ◽  
Butt Welding ◽  
Strength Tests ◽  
Metallic Foils ◽  
The Impact

AbstractThe purpose of the experiment was to study the influence of the laser beam in pulse mode on metallic foils in order to obtain a spot weld. The welding process was carried out using the overlap weld method, using spot welds in various quantities. The Nd - YAG BLS 720 pulsed laser was used to conduct the experiment. The impact of the number of spot welds on the value of force needed to break the sample was examined. A number of measurements were carried out to determine the best process parameters. Butt welding and overlap welding were also performed using a continuous weld consisting of spot welds. Weld strength tests were performed to select the most appropriate parameters for the process under consideration.

Sign in / Sign up

Export Citation Format

Share Document