scholarly journals High Entropy Alloy Coatings and Technology

Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 372
Author(s):  
Ashutosh Sharma
Keyword(s):  
Great Increase ◽  
Research Community ◽  
Review Article ◽  
High Entropy Alloy ◽  
High Entropy Alloys ◽  
Coating Materials ◽  
Surface Protection ◽  
High Entropy ◽  
Materials Research ◽  
Thermally Sprayed

Recently, the materials research community has seen a great increase in the development of multicomponent alloys, known as high entropy alloys (HEAs) with extraordinary properties and applications. In surface protection and engineering, diverse applications of HEAs are also being counted to benefit from their attractive performances in various environments. Thermally sprayed HEA coatings have outperformed conventional coating materials and have accelerated further advancement in this field. Therefore, this review article overviews the initial developments and outcomes in the field of HEA coatings. The authors have also categorized these HEA coatings in metallic, ceramic, and composite HEA coatings and discussed various developments in each of the categories in detail. Various fabrication strategies, properties, and important applications of these HEAs are highlighted. Further, various issues and future possibilities in this area for coatings development are recommended.

scholarly journals Wear Behavior and Tribological Evolution of High Entropy Alloys

2019 ◽  
Vol 8 (2S11) ◽  
pp. 3143-3146
Keyword(s):  
Wear Behavior ◽  
Research Work ◽  
Review Article ◽  
High Entropy Alloy ◽  
Chemical Compositions ◽  
High Entropy Alloys ◽  
Multicomponent Alloys ◽  
High Entropy ◽  
Mechanical And Tribological Properties ◽  
Structural Applications

High entropy alloy are equiatomic and nonequiatomic complex concentrated/ multicomponent alloys which are recognized due to their distinctive mechanical and triboligical properties. A unique combination of excellent mechanical and tribological properties of high entropy alloys makes them promising candidate for variety of industrial and structural applications. The wear resistance needs to be examined for these complex concentrated alloys as only few numbers of reports and investigation are available in the field of new advanced HEAs materials. In the current research work, we identified the crucial achievements and breakthrough in the wear and tribological investigations of high entropy alloy and HEA based composites in recent years. This review article investigates the tribological behaviors of multicomponent alloys /high entropy alloys and HEA based composites which play an important role and draw a considerable attention in the present era. In view of recent developments on tribological and wear related mechanisms of HEAs for different type of industrial and structural applications, microstructure, chemical compositions, and mechanical properties are explained and reviewed in this review article.

scholarly journals Effect of Copper Addition on the AlCoCrFeNi High Entropy Alloys Properties via the Electroless Plating and Powder Metallurgy Technique

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 540
Author(s):  
Mohamed Ali Hassan ◽  
Hossam M. Yehia ◽  
Ahmed S. A. Mohamed ◽  
Ahmed Essa El-Nikhaily ◽  
Omayma A. Elkady
Keyword(s):  
Compressive Strength ◽  
Powder Metallurgy ◽  
Atomic Radius ◽  
The Other ◽  
High Entropy Alloy ◽  
Coating Process ◽  
High Entropy Alloys ◽  
Powder Metallurgy Technique ◽  
Copper Metal ◽  
High Entropy

To improve the AlCoCrFeNi high entropy alloys’ (HEAs’) toughness, it was coated with different amounts of Cu then fabricated by the powder metallurgy technique. Mechanical alloying of equiatomic AlCoCrFeNi HEAs for 25 h preceded the coating process. The established powder samples were sintered at different temperatures in a vacuum furnace. The HEAs samples sintered at 950˚C exhibit the highest relative density. The AlCoCrFeNi HEAs model sample was not successfully produced by the applied method due to the low melting point of aluminum. The Al element’s problem disappeared due to encapsulating it with a copper layer during the coating process. Because the atomic radius of the copper metal (0.1278 nm) is less than the atomic radius of the aluminum metal (0.1431 nm) and nearly equal to the rest of the other elements (Co, Cr, Fe, and Ni), the crystal size powder and fabricated samples decreased by increasing the content of the Cu wt%. On the other hand, the lattice strain increased. The microstructure revealed that the complete diffusion between the different elements to form high entropy alloy material was not achieved. A dramatic decrease in the produced samples’ hardness was observed where it decreased from 403 HV at 5 wt% Cu to 191 HV at 20 wt% Cu. On the contrary, the compressive strength increased from 400.034 MPa at 5 wt% Cu to 599.527 MPa at 15 wt% Cu with a 49.86% increment. This increment in the compressive strength may be due to precipitating the copper metal on the particles’ surface in the nano-size, reducing the dislocations’ motion, increasing the stiffness of produced materials. The formability and toughness of the fabricated materials improved by increasing the copper’s content. The thermal expansion has increased gradually by increasing the Cu wt%.

A review on phase prediction in high entropy alloys

2021 ◽  
pp. 095440622110089
Author(s):  
Vinay Kumar Soni ◽  
S Sanyal ◽  
K Raja Rao ◽  
Sudip K Sinha
Keyword(s):  
Solid Solution ◽  
Phase Formation ◽  
Single Phase ◽  
High Entropy Alloy ◽  
High Entropy Alloys ◽  
Modeling Tools ◽  
High Entropy ◽  
Recent Developments ◽  
Phase Prediction ◽  
The Stability

The formation of single phase solid solution in High Entropy Alloys (HEAs) is essential for the properties of the alloys therefore, numerous approach were proposed by many researchers to predict the stability of single phase solid solution in High Entropy Alloy. The present review examines some of the recent developments while using computational intelligence techniques such as parametric approach, CALPHAD, Machine Learning etc. for prediction of various phase formation in multicomponent high entropy alloys. A detail study of this data-driven approaches pertaining to the understanding of structural and phase formation behaviour of a new class of compositionally complex alloys is done in the present investigation. The advantages and drawbacks of the various computational are also discussed. Finally, this review aims at understanding several computational modeling tools complying the thermodynamic criteria for phase formation of novel HEAs which could possibly deliver superior mechanical properties keeping an aim at advanced engineering applications.

scholarly journals Enhanced Wear Behaviour of Spark Plasma Sintered AlCoCrFeNiTi High-Entropy Alloy Composites

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2225 ◽  
Author(s):  
Martin Löbel ◽  
Thomas Lindner ◽  
Thomas Lampke
Keyword(s):  
Wear Resistance ◽  
High Hardness ◽  
Solid Lubricants ◽  
Wear Behaviour ◽  
High Entropy Alloy ◽  
Surface Protection ◽  
High Entropy ◽  
Production Route ◽  
The Coefficient Of Friction ◽  
Spark Plasma

High hardness and good wear resistance have been revealed for the high-entropy alloy (HEA) system AlCoCrFeNiTi, confirming the potential for surface protection applications. Detailed studies to investigate the microstructure and phase formation have been carried out using different production routes. Powder metallurgical technologies allow for much higher flexibility in the customisation of materials compared to casting processes. Particularly, spark plasma sintering (SPS) enables the fast processing of the feedstock, the suppression of grain coarsening and the production of samples with a low porosity. Furthermore, solid lubricants can be incorporated for the improvement of wear resistance and the reduction of the coefficient of friction (COF). This study focuses on the production of AlCoCrFeNiTi composites comprising solid lubricants. Bulk materials with a MoS2 content of up to 15 wt % were produced. The wear resistance and COF were investigated in detail under sliding wear conditions in ball-on-disk tests at room temperature and elevated temperature. At least 10 wt % of MoS2 was required to improve the wear behaviour in both test conditions. Furthermore, the effects of the production route and the content of solid lubricant on microstructure formation and phase composition were investigated. Two major body-centred cubic (bcc) phases were detected in accordance with the feedstock. The formation of additional phases indicated the decomposition of MoS2.

Compression stress strengthening modelling of a ultrafine-grained equiatomic SPS CoCrFeNiNb high-entropy alloy

2020 ◽  
pp. 095440622094324
Author(s):  
Marcello Cabibbo ◽  
Filip Průša ◽  
Alexandra Šenková ◽  
Andrea Školáková ◽  
Vojtěch Kučera ◽  
...  
Keyword(s):  
Powder Metallurgy ◽  
Mechanical Alloying ◽  
Oxide Phase ◽  
High Entropy Alloy ◽  
Induction Melting ◽  
High Entropy Alloys ◽  
High Entropy ◽  
Plasma Sintering ◽  
Transmission Electron ◽  
Spark Plasma

High-entropy alloys are known to show exceptionally high mechanical properties, both compression and tensile strength, and unique physical properties, such as their phase stability. These quite unusual properties are primarily due to the microstructure generated by mechanical alloying processes, such as conventional induction arc melting, powder metallurgy, or mechanical alloying. In the present study, an equiatomic CoCrFeNiNb high-entropy alloy was prepared by a sequence of conventional induction melting, powder metallurgy, and compaction via spark plasma sintering. The high-entropy alloys showed uniform sub-micrometer grain microstructure consisted by a mixture of an fcc solid solution strengthened by a hcp Laves phase and a third intergranular oxide phase. The as-cast high-entropy alloys showed an ultimate compression strength (UCS) of ∼1400 MPa, which after sintering and compaction at 1273 K increased up to ∼2400 MPa. Extensive transmission electron microscopy quantitative analyses were carried out to model the UCS. A quite good agreement between the microstructure-strengthening model and the experimental UCS was found.

scholarly journals Cutting Edge of High-Entropy Alloy Superconductors from the Perspective of Materials Research

Metals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1078
Author(s):  
Jiro Kitagawa ◽  
Shusuke Hamamoto ◽  
Naoki Ishizu
Keyword(s):  
Material Design ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
Simple Material ◽  
Σ Phase ◽  
High Entropy ◽  
Cscl Type ◽  
Materials Research ◽  
Face Centered ◽  
New Phenomena

High-entropy alloys (HEAs) are a new class of materials which are being energetically studied around the world. HEAs are characterized by a multicomponent alloy in which five or more elements randomly occupy a crystallographic site. The conventional HEA concept has developed into simple crystal structures such as face-centered-cubic (fcc), body-centered-cubic (bcc) and hexagonal-closed packing (hcp) structures. The highly atomic-disordered state produces many superior mechanical or thermal properties. Superconductivity has been one of the topics of focus in the field of HEAs since the discovery of the bcc HEA superconductor in 2014. A characteristic of superconductivity is robustness against atomic disorder or extremely high pressure. The materials research on HEA superconductors has just begun, and there are open possibilities for unexpectedly finding new phenomena. The present review updates the research status of HEA superconductors. We survey bcc and hcp HEA superconductors and discuss the simple material design. The concept of HEA is extended to materials possessing multiple crystallographic sites; thus, we also introduce multisite HEA superconductors with the CsCl-type, α-Mn-type, A15, NaCl-type, σ-phase and layered structures and discuss the materials research on multisite HEA superconductors. Finally, we present the new perspectives of eutectic HEA superconductors and gum metal HEA superconductors.

Microstructural Evolution in MgAlLiZnCaY and MgAlLiZnCaCu Multicomponent High Entropy Alloys

2018 ◽  
Vol 928 ◽  
pp. 183-187 ◽  
Author(s):  
Khin Sandar Tun ◽  
Manoj Gupta
Keyword(s):  
Microstructural Evolution ◽  
Microstructural Development ◽  
High Entropy Alloy ◽  
High Entropy Alloys ◽  
Light Weight ◽  
Aluminum Casting ◽  
High Entropy ◽  
Characterization Studies ◽  
Melt Deposition ◽  
Constituent Elements

In this research study, two light weight multi-component high entropy alloys (HEAs) consisting of six constituent elements were synthesized. The high entropy alloy having a chemical composition of Mg35Al33Li15Zn7Ca5Y5(atomic pct.) had a density of 2.25 g/cm3, while the high entropy alloy having a composition of Mg35Al33Li15Zn7Ca5Cu5(atomic pct.) had a density of 2.27 g/cm3. The strategy of non-equiatomic composition, high entropy of mixing coupled with low density was applied in designing the alloy systems. Disintegrated melt deposition (DMD) technique was used to synthesize the materials and characterization studies were performed on as-cast materials. The present study emphasizes on examining and understanding the microstructural development in the two light weight high entropy alloys. The formation and presence of phases and microstructural evolution were studied by interchanging yttrium and copper. Microstructural observations revealed presence of multiple phases in the developed alloys and the simplification of the microstructure when copper is used instead of yttrium. Microhardness results revealed a significant increase in hardness of of both the HEAs (3.8 – 4.2 times) when compared to AZ31 commercial magnesium alloy.Keywords: High Entropy Alloy, Magnesium, Aluminum, Casting, Microstructure

scholarly journals Prediction of Strength and Ductility in Partially Recrystallized CoCrFeNiTi0.2 High-Entropy Alloy

Entropy ◽  
2019 ◽  
Vol 21 (4) ◽  
pp. 389 ◽  
Author(s):  
Hanwen Zhang ◽  
Peizhi Liu ◽  
Jinxiong Hou ◽  
Junwei Qiao ◽  
Yucheng Wu
Keyword(s):  
Tensile Strength ◽  
Single Phase ◽  
Volume Fraction ◽  
Tensile Elongation ◽  
High Entropy Alloy ◽  
High Entropy Alloys ◽  
Number Density ◽  
High Entropy ◽  
Average Size ◽  
Strength And Ductility

The mechanical behavior of a partially recrystallized fcc-CoCrFeNiTi0.2 high entropy alloys (HEA) is investigated. Temporal evolutions of the morphology, size, and volume fraction of the nanoscaled L12-(Ni,Co)3Ti precipitates at 800 °C with various aging time were quantitatively evaluated. The ultimate tensile strength can be greatly improved to ~1200 MPa, accompanied with a tensile elongation of ~20% after precipitation. The temporal exponents for the average size and number density of precipitates reasonably conform the predictions by the PV model. A composite model was proposed to describe the plastic strain of the current HEA. As a consequence, the tensile strength and tensile elongation are well predicted, which is in accord with the experimental results. The present experiment provides a theoretical reference for the strengthening of partially recrystallized single-phase HEAs in the future.

scholarly journals Effect of Mo Addition on The Microstructure and Mechanical Properties of CoCuFeNi High Entropy Alloy

Metals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1017
Author(s):  
Yang Shao ◽  
Huan Ma ◽  
Yibing Wang
Keyword(s):  
Mechanical Properties ◽  
Solution Structure ◽  
Tensile Tests ◽  
Atomic Ratio ◽  
Vacuum Arc ◽  
High Entropy Alloy ◽  
High Entropy Alloys ◽  
High Entropy ◽  
Microstructure And Mechanical Properties ◽  
Mo Content

In order to reveal the effect of Mo addition on the microstructure and mechanical properties, (CoCuFeNi)100-xMox (x = 0, 10, 15, 19, and 25, x values in atomic ratio) high entropy alloys were prepared by vacuum arc-melting. The results showed that with Mo addition, the μ phase formed and serious separation occurred in the high entropy alloys. The content of μ phase increased with the increase in Mo content. The microstructure of the alloys changed from an initial single-phase face-center-cubic (FCC) solid solution structure (x = 0) to a hypoeutectic microstructure (x = 15), then to a full eutectic microstructure (x = 19), and finally to a hypereutectic microstructure (x = 25). Coherent interface between μ phase and FCC phase was observed. The (CoCuFeNi)81Mo19 alloy with fully eutectic microstructures exhibited the highest yield strength of 557 MPa and fracture strength of 767 MPa in tensile tests at room temperature. The fracture surface revealed that the formation of great amounts of the μ phase resulted in the loss of ductility of (CoCuFeNi)100-xMox alloys.

Sign in / Sign up

Export Citation Format

Share Document