scholarly journals A Loose-Coupled Fusion of Inertial and UWB Assisted by a Decision-Making Algorithm for Localization of Emergency Responders

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1463 ◽  
Author(s):  
André G. Ferreira ◽  
Duarte Fernandes ◽  
André P. Catarino ◽  
Ana M. Rocha ◽  
João L. Monteiro
Keyword(s):  
Decision Making ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Time Of Arrival ◽  
Robust Solution ◽  
Localization Accuracy ◽  
Positioning Systems ◽  
Emergency Responders ◽  
Pedestrian Dead Reckoning ◽  
Non Line Of Sight

Combining different technologies is gaining significant popularity among researchers and industry for the development of indoor positioning systems (IPSs). These hybrid IPSs emerge as a robust solution for indoor localization as the drawbacks of each technology can be mitigated or even eliminated by using complementary technologies. However, fusing position estimates from different technologies is still very challenging and, therefore, a hot research topic. In this work, we pose fusing the ultrawideband (UWB) position estimates with the estimates provided by a pedestrian dead reckoning (PDR) by using a Kalman filter. To improve the IPS accuracy, a decision-making algorithm was developed that aims to assess the usability of UWB measurements based on the identification of non-line-of-sight (NLOS) conditions. Three different data fusion algorithms are tested, based on three different time-of-arrival positioning algorithms, and experimental results show a localization accuracy of below 1.5 m for a 99th percentile.

scholarly journals Real-Time Indoor Positioning Approach Using iBeacons and Smartphone Sensors

2020 ◽  
Vol 10 (6) ◽  
pp. 2003 ◽  
Author(s):  
Liu Liu ◽  
Bofeng Li ◽  
Ling Yang ◽  
Tianxia Liu
Keyword(s):  
Real Time ◽  
Low Cost ◽  
Dead Reckoning ◽  
Indoor Positioning ◽  
Reasonable Accuracy ◽  
Positioning Accuracy ◽  
Localization Accuracy ◽  
Positioning Systems ◽  
Smartphone Sensors ◽  
Pedestrian Dead Reckoning

For localization in daily life, low-cost indoor positioning systems should provide real-time locations with a reasonable accuracy. Considering the flexibility of deployment and low price of iBeacon technique, we develop a real-time fusion workflow to improve localization accuracy of smartphone. First, we propose an iBeacon-based method by integrating a trilateration algorithm with a specific fingerprinting method to resist RSS fluctuations, and obtain accurate locations as the baseline result. Second, as turns are pivotal for positioning, we segment pedestrian trajectories according to turns. Then, we apply a Kalman filter (KF) to heading measurements in each segment, which improves the locations derived by pedestrian dead reckoning (PDR). Finally, we devise another KF to fuse the iBeacon-based approach with the PDR to overcome orientation noises. We implemented this fusion workflow in an Android smartphone and conducted real-time experiments in a building floor. Two different routes with sharp turns were selected. The positioning accuracy of the iBeacon-based method is RMSE 2.75 m. When the smartphone is held steadily, the fusion positioning tests result in RMSE of 2.39 and 2.22 m for the two routes. In addition, the other tests with orientation noises can still result in RMSE of 3.48 and 3.66 m. These results demonstrate our fusion workflow can improve the accuracy of iBeacon positioning and alleviate the influence of PDR drifting.

scholarly journals iPAC: Integrate Pedestrian Dead Reckoning and Computer Vision for Indoor Localization and Tracking

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 183514-183523 ◽  
Author(s):  
Danyang Li ◽  
Yumeng Lu ◽  
Jingao Xu ◽  
Qiang Ma ◽  
Zhuo Liu
Keyword(s):  
Computer Vision ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Localization And Tracking ◽  
Pedestrian Dead Reckoning

scholarly journals Grid-Based Bayesian Filtering Methods for Pedestrian Dead Reckoning Indoor Positioning Using Smartphones

Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5343
Author(s):  
Miroslav Opiela ◽  
František Galčík
Keyword(s):  
Dead Reckoning ◽  
Step Length ◽  
Indoor Positioning ◽  
Shopping Mall ◽  
Bayesian Filtering ◽  
Current Position ◽  
Positioning Systems ◽  
Time Calculation ◽  
Pedestrian Dead Reckoning ◽  
Grid Based

Indoor positioning systems for smartphones are often based on Pedestrian Dead Reckoning, which computes the current position from the previously estimated location. Noisy sensor measurements, inaccurate step length estimations, faulty direction detections, and a demand on the real-time calculation introduce the error which is suppressed using a map model and a Bayesian filtering. The main focus of this paper is on grid-based implementations of Bayes filters as an alternative to commonly used Kalman and particle filters. Our previous work regarding grid-based filters is elaborated and enriched with convolution mask calculations. More advanced implementations, the centroid grid filter, and the advanced point-mass filter are introduced. These implementations are analyzed and compared using different configurations on the same raw sensor recordings. The evaluation is performed on three sets of experiments: a custom simple path in faculty building in Slovakia, and on datasets from IPIN competitions from a shopping mall in France, 2018 and a research institute in Italy, 2019. Evaluation results suggests that proposed methods are qualified alternatives to the particle filter. Advantages, drawbacks and proper configurations of these filters are discussed in this paper.

PDR-Aided Algorithm with WiFi Fingerprint Matching for Indoor Localization

2014 ◽  
Vol 701-702 ◽  
pp. 989-993
Author(s):  
Wen Bin Yu ◽  
Peng Li ◽  
Zhi Chen ◽  
Chang Li
Keyword(s):  
Social Network ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Location Based Services ◽  
Fingerprint Matching ◽  
Network Applications ◽  
Wireless Signal ◽  
Signal Fluctuation ◽  
Pedestrian Dead Reckoning ◽  
Wifi Fingerprint

Recently, indoor localization is essential to enable location-based services for many mobile and social network applications. Due to fluctuation of the wireless signal, the accuracy of a simple WiFi fingerprint-based localization is not high. In this paper, we first exploit Pedestrian Dead Reckoning (PDR) technology to overcome the problem of the wireless signal fluctuation, then propose a PDR-aided algorithm with WiFi fingerprint matching for indoor localization, which using the PDR technology aided indoor localization. Experiments show that our algorithm has better accuracy than other indoor localization methods.

scholarly journals INDOOR LOCALIZATION USING ACCELEROMETER AND GYROSCOPE SMARTPHONE BASED

2021 ◽  
Vol 2 (2) ◽  
pp. 119-126
Author(s):  
Anggreini Intan Permata Sari ◽  
Arkham Zahri Rakhman
Keyword(s):  
Error Rate ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Initial Position ◽  
Sensor System ◽  
System Testing ◽  
Accelerometer Sensor ◽  
Campus Environment ◽  
Gyroscope Sensor ◽  
Pedestrian Dead Reckoning

Indoor localization is one of the more accurate technologies to be used to determine indoors or buildings. Pedestrian Dead Reckoning (PDR) is a method of determining the user's position by adding a method that occurs to a known initial position. The displacement that occurs is estimated with the help of an accelerometer sensor attached to the user as a step detector and to determine the direction towards the user using a gyroscope sensor. System testing is carried out in the Institut Teknologi Sumatera’s campus environment on the 2nd floor of Building C and D. The results from the detection of steps get an error rate of 1.13% using a threshold of 0.8.

scholarly journals Smartphone-Based Pedestrian Dead Reckoning for 3D Indoor Positioning

Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8180
Author(s):  
Jijun Geng ◽  
Linyuan Xia ◽  
Jingchao Xia ◽  
Qianxia Li ◽  
Hongyu Zhu ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Step Length ◽  
Indoor Positioning ◽  
Actual Measurement ◽  
Location Service ◽  
Cubature Kalman Filter ◽  
Robust Adaptive ◽  
Pedestrian Dead Reckoning

Indoor localization based on pedestrian dead reckoning (PDR) is drawing more and more attention of researchers in location-based services (LBS). The demand for indoor localization has grown rapidly using a smartphone. This paper proposes a 3D indoor positioning method based on the micro-electro-mechanical systems (MEMS) sensors of the smartphone. A quaternion-based robust adaptive cubature Kalman filter (RACKF) algorithm is proposed to estimate the heading of pedestrians based on magnetic, angular rate, and gravity (MARG) sensors. Then, the pedestrian behavior patterns are distinguished by detecting the changes of pitch angle, total accelerometer and barometer values of the smartphone in the duration of effective step frequency. According to the geometric information of the building stairs, the step length of pedestrians and the height difference of each step can be obtained when pedestrians go up and downstairs. Combined with the differential barometric altimetry method, the optimal height can be computed by the robust adaptive Kalman filter (RAKF) algorithm. Moreover, the heading and step length of each step are optimized by the Kalman filter to reduce positioning error. In addition, based on the indoor map vector information, this paper proposes a heading calculation strategy of the 16-wind rose map to improve the pedestrian positioning accuracy and reduce the accumulation error. Pedestrian plane coordinates can be solved based on the Pedestrian Dead-Reckoning (PDR). Finally, combining pedestrian plane coordinates and height, the three-dimensional positioning coordinates of indoor pedestrians are obtained. The proposed algorithm is verified by actual measurement examples. The experimental verification was carried out in a multi-story indoor environment. The results show that the Root Mean Squared Error (RMSE) of location errors is 1.04–1.65 m by using the proposed algorithm for three participants. Furthermore, the RMSE of height estimation errors is 0.17–0.27 m for three participants, which meets the demand of personal intelligent user terminal for location service. Moreover, the height parameter enables users to perceive the floor information.

scholarly journals Tightly Coupling Fusion of UWB Ranging and IMU Pedestrian Dead Reckoning for Indoor Localization

IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Rashid Ali ◽  
Ran Liu ◽  
Anand Nayyar ◽  
Basit Qureshi ◽  
Zhiqiang Cao
Keyword(s):  
Indoor Localization ◽  
Dead Reckoning ◽  
Pedestrian Dead Reckoning

scholarly journals Dynamic Adjustment of Weighted GCC-PHAT for Position Estimation in an Ultrasonic Local Positioning System

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7051
Author(s):  
José Manuel Villadangos ◽  
Jesús Ureña ◽  
Juan Jesús García-Domínguez ◽  
Ana Jiménez-Martín ◽  
Álvaro Hernández ◽  
...  
Keyword(s):  
Indoor Localization ◽  
Weighting Factor ◽  
Position Estimation ◽  
Correlation Technique ◽  
Time Of Arrival ◽  
Dynamic Adjustment ◽  
Positioning Systems ◽  
Positioning Errors ◽  
Local Positioning System ◽  
Cross Correlation Technique

Ultrasonic local positioning systems (ULPS) have been brought to the attention of researchers as one of the possibilities that can be used for indoor localization. Acoustic systems combine a suitable trade-off between precision, ease of development, and cost. This work proposes a method for measuring the time of arrival of encoded emissions from a set of ultrasonic beacons, which are used to implement an accurate ULPS. This method uses the generalized cross-correlation technique with PHAT filter and weighting factor β (GCC-PHAT-β). To improve the performance of the GCC-PHAT-β in encoded emission detection, the employment is proposed of mixed-medium multiple-access techniques, based on code division and time division multiplexing of beacon emissions (CDMA and TDMA respectively), and to dynamically adjust the PHAT filter weighting factor. The receiver position is obtained by hyperbolic multilateration from the time differences of arrival (TDoA) between a reference beacon and the rest, thus avoiding the need for receiver synchronization. The results show how the dynamic adaptation of the weighting factor significantly reduces positioning errors from 20 cm to 2 cm in 80% of measurements. The simulated and real experiments prove that the proposed algorithms improve the performance of the ULPS in situations with lower signal-to-noise ratios (SNR) than 0 dB and in environments where the multipath effect makes it difficult to correctly detect the encoded ultrasonic emissions.

Sign in / Sign up

Export Citation Format

Share Document