scholarly journals The Alps-Apennines Interference Zone: A Perspective from the Maritime and Wester Ligurian Alps

Geosciences ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 185
Author(s):  
Fabrizio Piana ◽  
Luca Barale ◽  
Carlo Bertok ◽  
Anna d’Atri ◽  
Andrea Irace ◽  
...  
Keyword(s):  
Shear Zones ◽  
Western Alps ◽  
Structural Systems ◽  
Early Oligocene ◽  
Ligurian Alps ◽  
Tectonic Transport ◽  
The Alps ◽  
Southwestern Alps ◽  
Transfer Zone ◽  
Scale Shear

In SW Piemonte the Western Alps arc ends off in a narrow, E-W trending zone, where some geological domains of the Alps converged. Based on a critical review of available data, integrated with new field data, it is concluded that the southern termination of Western Alps recorded the Oligocene-Miocene activity of a regional transfer zone (southwestern Alps Transfer, SWAT) already postulated in the literature, which should have allowed, since early Oligocene, the westward indentation of Adria, while the regional shortening of SW Alps and tectonic transport toward the SSW (Dauphinois foreland) was continuing. This transfer zone corresponds to a system of deformation units and km-scale shear zones (Gardetta-Viozene Zone, GVZ). The GVZ/SWAT developed externally to the Penninic Front (PF), here corresponding to the Internal Briançonnais Front (IBF), which separates the Internal Briançonnais domain, affected by major tectono-metamorphic transformations, from the External Briançonnais, subjected only to anchizonal metamorphic conditions. The postcollisional evolution of the SW Alps axial belt units was recorded by the Oligocene to Miocene inner syn-orogenic basin (Tertiary Piemonte Basin, TPB), which rests also on the Ligurian units stacked within the adjoining Apennines belt in southern Piemonte. The TPB successions were controlled by transpressive faults propagating (to E and NE) from the previously formed Alpine belt, as well as by the Apennine thrusts that were progressively stacking the Ligurian units, resting on the subducting Adriatic continental margin, with the TPB units themselves. This allows correlation between Alps and Apennines kinematics, in terms of age of the main geologic events, interference between the main structural systems and tectonic control exerted by both tectonic belts on the same syn-orogenic basin.

Striking differences in lithospheric structure between the north- and south-western Alps: insights from receiver functions along the Cifalps profiles and a new Vs model

2021 ◽  
Author(s):  
Anne Paul ◽  
Ahmed Nouibat ◽  
Liang Zhao ◽  
Stefano Solarino ◽  
Stéphane Schwartz ◽  
...  
Keyword(s):  
Receiver Function ◽  
Negative Polarity ◽  
Western Alps ◽  
Lithospheric Structure ◽  
Seismic Stations ◽  
Continental Subduction ◽  
The North ◽  
Ligurian Alps ◽  
The Alps ◽  
Converted Waves

<p>The CIFALPS receiver-function (RF) profile in the southwestern Alps provided the first seismological evidence of continental subduction in the Alps, with the detection of waves converted on the European Moho at 75-80 km depth beneath the western edge of the Po basin (Zhao et al., 2015). To complement the CIFALPS profile and enhance our knowledge of the lithospheric structure of the Western Alps, we installed CIFALPS2, a temporary network of 55 broadband seismic stations that operated for ~14 months (2018-2019) across the North-Western Alps (Zhao et al., 2018). The CIFALPS2 line runs from the Eastern Massif Central to the Ligurian coast, across the Mont-Blanc and Gran Paradiso massifs and the Ligurian Alps. Seismic stations were installed along a quasi-linear profile with a spacing of 7-10 km.</p><p>We will show 2 receiver-function CCP (common-conversion point) depth-migrated sections along the CIFALPS2 profile, the first one across the Alps, and the second one across the Ligurian Alps and the Po basin. The time-to-depth migration of RF data is based on the new 3-D Vs model of the Greater Alpine region derived by Nouibat et al. (2021) using transdimensional ambient noise tomography on a large dataset including the AlpArray seismic network. Depth sections across the Vs model are also useful for interpreting the RF CCP sections as they have striking similarities.</p><p>The images of the lithospheric structure of the NW Alps along CIFALPS2 are surprisingly different from those of the SW Alps along CIFALPS. The deepest P-to-S converted phases on the European Moho are detected at 60-65 km depth beneath the Ivrea-Verbano zone, that is 15 km less than on CIFALPS. The negative polarity converted phase interpreted as the base of the Ivrea body mantle flake on the CIFALPS section is still visible on CIFALPS2, but with a lower amplitude. The RF section confirms the existence of a jump of the European Moho of ~10 km amplitude in less than 10 km distance, which is located within a few km from the western boundary of the Mont Blanc external crystalline massif. All these observations are confirmed by the Vs model that also displays a less deep continental subduction than on CIFALPS, weaker S-wave velocities in the Ivrea body wedge, and the jump of the European Moho.</p><p>The Moho beneath the Ligurian Alps is detected at 25-30 km depth both on the RF and on the Vs depth sections. Moving northwards, this Ligurian Moho is separated from the Adriatic Moho by a puzzling S-dipping set of P-to-S converted waves with negative polarity. The crust of the Ligurian Alps is characterized by a set of north-dipping negative-polarity converted waves at 10 to 20 km depth beneath the Valosio massif, which is a small internal crystalline massif of (U)HP metamorphic rocks located north of Voltri. The similarity of this set of negative-polarity conversions to the one observed beneath the Dora Maira massif on the CIFALPS profile suggests that it may be a relic of the Alpine structure overprinted by the opening of the Ligurian sea.</p>

Styles and regimes of orogenic thickening in the Peloritani Mountains (Sicily, Italy): new constraints on the tectono-metamorphic evolution of the Apennine belt

2008 ◽  
Vol 145 (4) ◽  
pp. 552-569 ◽  
Author(s):  
GIANLUCA VIGNAROLI ◽  
FEDERICO ROSSETTI ◽  
THOMAS THEYE ◽  
CLAUDIO FACCENNA
Keyword(s):  
Shear Bands ◽  
Shear Zones ◽  
Geothermal Gradient ◽  
Brittle Deformation ◽  
Metamorphic Evolution ◽  
Constituent Element ◽  
Shear Sense ◽  
Tectonic Transport ◽  
History Of ◽  
Scale Shear

AbstractThe Peloritani Mountains constitute the Sicilian portion of the Calabria–Peloritani Arc (Italy), a tectono-metamorphic edifice recording the history of the subduction–exhumation cycle during Tertiary convergence between the African and European plates. Here, we describe the kinematic and the petrological characteristics of the major shear zones bounding the lowermost continental-derived metamorphic units cropping out in the eastern portion of the Peloritani Mountains. Both meso- and micro-scale shear sense criteria indicate a top-to-the-SSE tectonic transport, during a general evolution from ductile to brittle deformation conditions. Quantitative thermobarometry on texturally equilibrated phengite–chlorite pairs crystallized along the shear bands indicates pressure of 6–8 kbar at temperatures of 360–440 °C for the structurally highest units and 3–4 kbar at 380–440 °C for the lowest ones. This documents an overall inverse-type nappe arrangement within the tectonic edifice and a transition from an Alpine- (13–18 °C km−1) to a Barrovian-type (28–36 °C km−1) geothermal gradient during the progress of the Alpine orogenic metamorphism in the Peloritani Mountains. The integration of these results allows the Peloritani Mountains to be considered as a constituent element of the Apennine orogenic domain formed during the progressive space–time transition from oceanic to continental subduction at the active convergent margin.

Genetic Differentiation among Populations of Cicerbita alpina (L.) Wallroth (Asteraceae) in the Western Alps

2007 ◽  
Vol 62 (9-10) ◽  
pp. 747-756 ◽  
Author(s):  
Thomas Michl ◽  
Stefan Huck ◽  
Peter Haase ◽  
Burkhard Büdel
Keyword(s):  
Western Alps ◽  
Molecular Evidence ◽  
Suitable Model ◽  
Black Forest ◽  
Long Distance ◽  
Group A ◽  
The Alps ◽  
Group B ◽  
Southwestern Alps ◽  
Cicerbita Alpina

In this study we analyzed the genetic population structure of the hygrophilous tall-herb Cicerbita alpina in the western Alps because this group of mountain plants is underrepresented in the biogeographical literature. AFLP (amplified fragment length polymorphism) fingerprints of 40 samples were analyzed from four populations situated in a transect from the southwestern Alps to the eastern part of the western Alps and one population from the Black Forest outside the Alps. Two genetic groups can be distinguished. The first group (A) comprises the populations from the northern and eastern parts of the western Alps, and the second group (B) comprises the populations from the southwestern Alps and the Black Forest. Group A originates most likely from at least one refugium in the southern piedmont regions of the Alps. This result provides molecular evidence for a humid climate at the southern margin of the Alps during the Würm glaciation. Group B originates presumably from western or northern direction and we discuss two possible scenarios for the colonization of the Alps, i. e. (1) long-distance dispersal from southwestern refugia and (2) colonization from nearby refugia in the western and/or northern Alpine forelands. The study demonstrates that the target species harbours considerable genetic diversity, even on a regional scale, and therefore is a suitable model for phylogeographic research.

Synconvergent and coherent (ultra)high-pressure crustal rock exhumation

2021 ◽  
Author(s):  
Lorenzo G. Candioti ◽  
Joshua D. Vaughan-Hammon ◽  
Thibault Duretz ◽  
Stefan M. Schmalholz
Keyword(s):  
Numerical Models ◽  
A Priori ◽  
Western Alps ◽  
Ultrahigh Pressure ◽  
Plate Motion ◽  
Crustal Rock ◽  
Plate Boundaries ◽  
Crustal Rocks ◽  
Natural Data ◽  
The Alps

<p>Ultrahigh-pressure (UHP) continental crustal rocks were first discovered in the Western Alps in 1984 and have since then been observed at many convergent plate boundaries worldwide. Unveiling the processes leading to the formation and exhumation of (U)HP metamorphic crustal rocks is key to understand the geodynamic evolution of orogens such as the Alps.</p><p> </p><p>Previous numerical studies investigating (U)HP rock exhumation in the Alps predicted deep (>80 km) subduction of crustal rocks and rapid buoyancy-driven exhumation of mainly incoherent (U)HP units, involving significant tectonic mixing forming so-called mélanges. Furthermore, these predictions often rely on excessive erosion or periods of divergent plate motion as important exhumation mechanism. Inconsistent with field observations and natural data, application of these models to the Western Alps was recently criticised.</p><p> </p><p>Here, we present models with continuous plate convergence, which exhibit local tectonic-driven upper plate extension enabling compressive- and buoyancy-driven exhumation of coherent (U)HP units along the subduction interface, involving feasible erosion.</p><p> </p><p>The two-dimensional petrological-thermo-mechanical numerical models presented here predict both subduction initiation and serpentinite channel formation without any a priori prescription of these two features. The (U)HP units are exhumed coherently, without significant internal deformation. Modelled pressure and temperature trajectories and exhumation velocities of selected crustal units agree with estimates for the Western Alps. The presented models support previous hypotheses of synconvergent exhumation, but do not rely on excessive erosion or divergent plate motion. Thus, our predictions provide new insights into processes leading to the exhumation of coherent (U)HP crustal units consistent with observations and natural data from the Western Alps.</p>

Review of the Incurvaria vetulella species-group in the Alps (Lepidoptera: Incurvariidae)

1993 ◽  
Vol 24 (1) ◽  
pp. 109-120 ◽  
Author(s):  
Peter Huemer
Keyword(s):  
Eastern Alps ◽  
Species Group ◽  
Female Genitalia ◽  
Male And Female ◽  
The Alps ◽  
Southwestern Alps

AbstractHuemer, P.: Review of the Incurvaria vetulella species-group in the Alps (Lepidoptera: Incurvariidae). Ent. scand. 24: 109-120. Copenhagen, Denmark. April 1993. ISSN 0013-8711. The Incurvaria vetulella species-group in the Alps is defined and reviewed. The following species are recognized: vetulella (Zetterstedt, 1839) (eastern Alps), triglavensis Hauder, 1912 stat. n. (southeastern Alps) and ploessli sp. n. (southwestern Alps). All species are described and/or redefined and adults, male and female genitalia are illustrated. Furthermore, Scandinavian specimens of vetulella and circulella (Zetterstedt, 1839) are illustrated for comparison. The considerable external variation between various alpine populations of vetulella is discussed and regarded as infraspecific. A lectotype of triglavensis is designated.

Miocene to Messinian deformation and hydrothermal activity in a pre-Alpine basement massif of the French western Alps: new U-Th-Pb and argon ages from the Lauzière massif

2010 ◽  
Vol 181 (3) ◽  
pp. 227-241 ◽  
Author(s):  
Dominique Gasquet ◽  
Jean-Michel Bertrand ◽  
Jean-Louis Paquette ◽  
Jérémie Lehmann ◽  
Gueorgui Ratzov ◽  
...  
Keyword(s):  
Late Miocene ◽  
Shear Zones ◽  
Hydrothermal Activity ◽  
Western Alps ◽  
Strike Slip ◽  
Quartz Veins ◽  
The North ◽  
Slip Regime ◽  
Tectonically Active ◽  
Dextral Strike Slip

Abstract U-Pb and Th-Pb dating of monazite from hydrothermal quartz veins (“Alpine veins”) from the Lauzière massif (North Belledonne) together with Ar/Ar ages of adularias from the same veins constrain the age of the last tectono-metamorphic events that affected the External Crystalline Massifs (ECM). Ages obtained are surprisingly young. The study of the structural context of the veins combined with our chronological data, allow us to propose a tectonic scenario of the northern ECM for the 15-5 Ma period, which was poorly documented so far. The quartz veins are of two types: (i) the oldest are poorly mineralized (chlorite and epidote), flat-lying veins. The quartz fibres (= extension direction) are near vertical and seem to be associated with a subvertical dissolution schistosity superimposed upon an early Alpine deformation underlined by “mini-biotite”. They bear a sub-horizontal stretching lineation; (ii) the youngest veins are very rich in various minerals (anatase, rutile, phénacite, meneghinite, beryl, synchysite, ….). They are almost vertical. Their “en echelon” geometry as well as the horizontal attitude of their quartz fibres show a dextral strike-slip regime. Two groups of Th-Pb ages have been obtained: 11 to 10 Ma and 7 to 5 Ma. They were obtained from the most recent veins (vertical veins) sampled in different areas of the massif. The ca. 10 Ma ages are related to veins in the Lauzière granite and its metamorphic country-rocks at about 2 km from the eastern contact of the massif, while the ages of ca. 5 Ma correspond to veins occurring in mylonites along this contact. Adularias provided Ar/Ar ages at ca. 7 Ma. By contrast, a monazite from a vein of the Pelvoux massif (Plan du Lac) yielded a Th-Pb age of 17.6 Ma but in a different structural setting. Except fission track ages, there are very little ages of this range published in the recent literature on the Alps. The latter concern always gold mineralized veins (NE Mont Blanc and SW Lepontine dome). The last compressive tectonic regime dated between 15 and 12 Ma is coeval with (i) the late “Roselend thrust” event, which is recorded in the Mont Blanc by shear-zones with vertical lineation, (ii) the last movements in the basal mylonites of the Swiss Nappes, (iii) the horizontal Alpine veins from the Mont Blanc and Belledonne massifs (with vertical quartz fibres), which are similar to the early veins of the Lauzière. On the contrary, the vertical veins of the Lauzière, dated between 11 and 5 Ma, correspond to a dextral strike slip regime. This suggests that most of the strike-slip tectonics along the ECM took place during two stages (ca. 10 Ma and ca. 7-5 Ma) and not only at 18 Ma as had been proposed previously. Our ages are consistent with the late Miocene-Pliocene overlap of the Digne thrust to the South and to part of the normal movement along the Simplon fault to the North. Thus, all the external crystalline massifs were tectonically active during the late Miocene. This suggests that tectonic events in the external alpine belt may have contributed to some extent to the geodynamical causes of the Messinian crisis.

The arc of the Western Alps : understanding its kinematics and formation mechanisms based on new structural and paleomagnetic datas, and thermo-mechanical modelling.

2021 ◽  
Author(s):  
Quentin Brunsmann ◽  
Claudio Rosenberg ◽  
Nicolas Bellahsen ◽  
Laetitia Le Pourhiet
Keyword(s):  
Western Alps ◽  
Strike Slip ◽  
Rheological Parameters ◽  
The South ◽  
Adriatic Plate ◽  
The North ◽  
Field Evidence ◽  
Internal Zone ◽  
The Alps ◽  
East West

<p>The Alps have an overall East-West orientation, which changes radically in their western termination, where they rotate southward into a N-S strike, and then eastward into an E-W strike, forming the arc of the Western Alps. This arc is commonly inferred to have formed during collision, due to indentation of the Adriatic plate into the European continental margin. Several models attempted to provide a kinematic explanation for the formation of this arched, lateral end of the Alps. Indeed, the radial nature of the transport directions observed along the arc of the Western Alps cannot be explained by a classic convergence model.<br>For more than 50 years the formation of this arc was been associated to westward-directed indentation of Adria, accommodated along East-West oriented strike-slip faults, a sinistral one in the South of the arc and a dextral one in the North. The dextral one correspond to the Insubric Fault. The sinistral strike-slip zone, inferred to be localized along the «Stura corridor» (Piedmont, Italy) would correspond to a displacement of 100 to 150 km according to palaeogeographical, and geometric analyses. However, field evidence is scarce and barely documented in the literature.<br>Vertical axis rotations of the Adriatic indenter also inferred to be syn-collisional could have influenced the acquisition of the morphology of the arc. Paleomagnetic analyses carried out in the Internal Zone and in the Po plain suggest a southward increading amount of counter-clockwise rotation of the Adriatic plate and the Internal Zone, varying from 20°-25° in the North to nearly 120° in the South.<br>Dextral shear zones possibly accommodating this rotation in some conceptual models is observed in several places below the Penninic Front and affect the Argentera massif to the south. However, the measured displacement quantities do not appear to be equivalent to those induced by such rotations.<br>The present study aims to constrain the kinematic evolution of the arc of the Western Alps through a multidisciplinary approach. The first aspect of this project is the structural analysis of the area (Stura corridor) inferred to accommodate large sinistral displacements allowing for the westward indentation of the Adriatic indenter. We discuss the general lack of field evidence supporting sinistral strike-slip movements, in contrast to large-scale compilation of structures suggesting the possible occurrence of such displacement. The second part consists of a palaeomagnetic study, in which new data are integred with a compilation of already existing data. This compilation shows that several parts of the arc in the External Zone did not suffer any Cenozoic rotations, hence suggesting that a proto-arc already axisted at the onset collision, as suggested by independent evidence of some paleogeographic reconstruction. Finally, 2D and 3D thermo-mechanical modeling in using the pTatin3D code is used to test which structural (geometrical), and rheological parameters affected the first-order morphology of the Western Alpin arc and its kinematics. The synthesis of these different approaches allows us to propose a new model explaining the kinematics and the mechanisms of formation of the Western Alps arc.</p>

scholarly journals Crystallographic and Seismic Anisotropies of Calcite at Different Depths: A Study Using Quantitative Texture Analysis by Neutron Diffraction

Minerals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 26 ◽  
Author(s):  
Michele Zucali ◽  
Daniel Chateigner ◽  
and Bachir Ouladdiaf
Keyword(s):  
Neutron Diffraction ◽  
Texture Analysis ◽  
Shear Zone ◽  
Shear Zones ◽  
Orientation Distribution ◽  
Western Alps ◽  
S Wave ◽  
Wide Variability ◽  
Fold Belts ◽  
Different Depths

Eight samples of limestones and marbles were studied by neutron diffraction to collect quantitative texture (i.e., crystallographic preferred orientations or CPO) of calcite deforming at different depths in the crust. We studied the different Texture patterns developed in shear zones at different depth and their influence on seismic anisotropies. Samples were collected in the French and Italian Alps, Apennines, and Paleozoic Sardinian basement. They are characterized by isotropic to highly anisotropic (e.g., mylonite shear zone) fabrics. Mylonite limestones occur as shear zone horizons within the Cenozoic Southern Domain in Alpine thrust-and-fold belts (Italy), the Briançonnais domain of the Western Alps (Italy-France border), the Sardinian Paleozoic back-thrusts, or in the Austroalpine intermediate units. The analyzed marbles were collected in the Carrara Marble, in the Austroalpine Units in the Central (Mortirolo) and Western Alps (Valpelline). The temperature and depth of development of fabrics vary from <100 ∘ C, to 800 ∘ C and depth from <10 km to about 30 km, corresponding from upper to lower crust conditions. Quantitative Texture Analysis shows different types of patterns for calcite: random to strongly textured. Textured types may be further separated in orthorhombic and monoclinic (Types A and B), based on the angle defined with the mesoscopic fabrics. Seismic anisotropies were calculated by homogenizing the single-crystal elastic tensor, using the Orientation Distribution Function calculated by Quantitative Texture Analysis. The resulting P- and S-wave anisotropies show a wide variability due to the textural types, temperature and pressure conditions, and dip of the shear planes.

Sign in / Sign up

Export Citation Format

Share Document