scholarly journals Molybdenum Carbide and Sulfide Nanoparticles as Selective Hydrotreating Catalysts for FCC Slurry Oil to Remove Olefins and Sulfur

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2721
Author(s):  
He Liu ◽  
Zhipeng Qiu ◽  
Huihui Pan ◽  
Aijun Guo ◽  
Shouhui Jiao ◽  
...  
Keyword(s):  
Molybdenum Carbide ◽  
Structural Parameters ◽  
Ammonium Molybdate ◽  
Spot Test ◽  
Needle Coke ◽  
The Real ◽  
Hydrotreating Catalysts ◽  
The Stability ◽  
Bromine Number

As the two types of major impurities in FCC slurry oil (SLO), olefins and sulfur seriously deteriorate the preparation and quality of mesophase pitch or needle coke. The development of a hydrotreatment for SLO to remove olefins and sulfur selectively becomes imperative. This work presents the potentiality of dispersed Mo2C and MoS2 nanoparticles as selective hydrotreating catalysts of SLO. Mo2C was synthesized by the carbonization of citric acid, ammonium molybdate and KCl mixtures while MoS2 was prepared from the decomposition of precursors. These catalysts were characterized by XRD, HRTEM, XPS, BJH, BET, and applied to the hydrotreating of an SLO surrogate with defined components and real SLO. The conversion of olefins, dibenzothiophene and anthracene in the surrogate was detected by GC-MS. Elemental analysis, bromine number, diene value, 1H-NMR and spot test were used to characterize the changes of the real SLO. The results show that hydrotreating the SLO surrogate with a very small amount of Mo-based nanoparticles could selectively remove olefins and sulfur without the overhydrogenation of polyaromatics. Mo2C exhibited much better activity than MoS2, with 95% of olefins and dibenzothiophene in the surrogate removed while only 15% anthracene was hydrogenated. The stability of the real SLO was significantly improved. Its structural parameters changed subtly, proving the aromatic macromolecules had been preserved.

scholarly journals Design and Experimental Research on Soil Covering Device with Linkage and Differential Adjustment of Potato Planter

Agriculture ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 665
Author(s):  
Zhiqi Zheng ◽  
Zuoli Fu ◽  
Chenyang Wang ◽  
Yuxiang Huang ◽  
Jinpu He
Keyword(s):  
Structural Parameters ◽  
Stability Coefficient ◽  
Uniformity Coefficient ◽  
Main Research ◽  
Quality Potato ◽  
Sloping Field ◽  
Potato Planter ◽  
The Difference ◽  
The Stability

When the potato planter works on sloping field, it will cause problems such as poor film mulching quality due to the difference in volume of soil covering both sides of the discs and the inconvenient adjustment of the soil covering disc. The soil covering device with linkage and differential adjustment was designed to improve the mulching quality. The main research content includes explaining the structure and principle of the soil covering device and analyzing the structural parameters of the adjustment mechanism. The field experiment was completed to verify the performance of soil covering device, which takes the stability coefficient and uniformity coefficient of the volume of covering soil as factors. The result shows the following: (1) The volume of covering soil changes exponentially with the angle of the disc through data fitting, which can standardize the angle of covering disc; and (2) when the angle of disc is 30° and 60°, respectively, the uniformity coefficient of volume of covering soil is lower than 1.4, which has premium soil covering quality. When the angles of the discs on both sides differ greatly, the stability coefficient of volume of covering soil is 0.41, which can meet the requirements of the mulching quality of potato planter. This research provides the technical support for high-quality potato planting.

Criteria for evaluation of the coordinate measurements quality of parts geometric parameters at pilot-experimental production

2019 ◽  
pp. 3-8
Author(s):  
N.Yu. Bobrovskaya ◽  
M.F. Danilov
Keyword(s):  
Quality Indicators ◽  
Quality Management System ◽  
Technical Specification ◽  
Experimental Production ◽  
Technological Heredity ◽  
Coordinate Measurements ◽  
Reasonable Choice ◽  
The Stability ◽  
Geometric Elements

The criteria of the coordinate measurements quality at pilot-experimental production based on contemporary methods of quality management system and traditional methods of the measurements quality in Metrology are considered. As an additional criterion for quality of measurements, their duration is proposed. Analyzing the problem of assessing the quality of measurements, the authors pay particular attention to the role of technological heredity in the analysis of the sources of uncertainty of coordinate measurements, including not only the process of manufacturing the part, but all stages of the development of design and technological documentation. Along with such criteria as the degree of confidence in the results of measurements; the accuracy, convergence, reproducibility and speed of the results must take into account the correctness of technical specification, and such characteristics of the shape of the geometric elements to be controlled, such as flatness, roundness, cylindrical. It is noted that one of the main methods to reduce the uncertainty of coordinate measurements is to reduce the uncertainty in the initial data and measurement conditions, as well as to increase the stability of the tasks due to the reasonable choice of the basic geometric elements (measuring bases) of the part. A prerequisite for obtaining reliable quality indicators is a quantitative assessment of the conditions and organization of the measurement process. To plan and normalize the time of measurements, the authors propose to use analytical formulas, on the basis of which it is possible to perform quantitative analysis and optimization of quality indicators, including the speed of measurements.

Concept Of Increasing The Level Of Projects Of Work Production

2020 ◽  
pp. 59-63
Keyword(s):  
Practical Experience ◽  
Production Plan ◽  
The Real ◽  
Master Plans ◽  
General Contractor ◽  
Work Production ◽  
Construction Organization ◽  
Production Plans

The author analyzes the reasons that objectively reduce the importance and quality of the organizational and technological solutions of work production plans and the content of their main documents. Based on a generalization of practical experience, one of the real ways of increasing the level of work production plans is proposed as a result of the development of "The Unified Rules for Work Production on the Site" as part of the construction organization project, in the form of fundamental requirements, followed by the inclusion of this document in the work production plan as an input document. The structure and content of the Unified Rules are described with the disclosure of the main documents - calendar plans of work, construction master plans, technological schemes of works. The first section of the document contains requirements for the content of tasks for the development of the project of work execution, the order of its approval, and requirements for the quality of solutions. The second section presents principal solutions, methods of work execution and their technological schemes. The organizational and technological solutions adopted in the proposed document are specified and detailed by the General Contractor Construction Organization with due regard for the resource capabilities and the actual conditions of construction or reconstruction.

PEMBENAHAN TERHADAP LEMBAGA PEMASYARAKATAN DAPAT MENIADAKAN OPSI HUKUMAN MATI BAGI NARAPIDANA DI INDONESIA (THE IMPROVEMENT OF QUALITY OF PENITENTIARY CAN ELIMINATE THE DEATH PENALTY OPTIONS OF CONVICTED CRIMINALS IN INDONESIA)

2020 ◽  
Vol 10 (2) ◽  
pp. 175
Author(s):  
Nomensen Freddy Siahaan
Keyword(s):  
Death Penalty ◽  
Deterrent Effect ◽  
Criminal Cases ◽  
Psychological Burden ◽  
The Real ◽  
The Public ◽  
Good Citizen ◽  
The People ◽  
Long Time

After a long time was not heard to the public area, lately death penalty toward the criminal cases that classified as extraordinary crime are appear. The author discovers electronic article about the execution of the death penalty which is the prosecutor prepares to execute death penalty toward the drugs dealer. The president of Republic of Indonesia stated that it is necessary to give a deterrent effect to the convicted  criminal and keep the morality of Indonesian teenagers. According to my opinion, the author argues that it will be better and wiser if we discuss about renovating all of the Penitentiary in Indonesia than debating whether death penalty could be done in Indonesia or not, because it will be displeasure many parties, death penalty infringed the human rights of the convicted criminals and cause psychological burden to them, families, the executor of the death penalty, and other parties. Because if we have to improve the quality of the Penitentiary, if the function of Penitentiary for fostering moralily has been optimal or properly enough to the convicted criminals, Indonesia will be no longer need the death penalty option as sanction to the convicted crimanals including for the extraordinary crime (especially for drugs trafficking in our country). Penitentiary is one of the public services which aims for fostering the people that initially have bad habits (commited to the crime), so that they will have the awareness to change their bad attitude into the be better ones, will not harm others, and positively contributed to the society. Already Penitentiary’s conditions should be designed in such a way and as good as possible, so that the inmates feels like at their own home (like having a second home after his own home), and feel humaner to spend their days in the Penitentiary. The author believes that if the Penitentiary has been improved and optimized its function well, then the real purpose of Penitentiary will definitely achieved. As stated in Law Number 12 Year 1995 regarding to Penitentiary Article 2 which states "sanction system are organized in order to fostering the convicted criminals in order to be the real man, aware of their fault, improve themselves, and not to repeat the criminal act so that they can be friendly received by the community, can actively participated in the development of our country, and can socialize themselves as good citizen."Article 3 on this regulation also intensifies the function of Penitentiary "the function of Penitentiary is to prepare convicted criminals to be able to properly integrated to the society, so they can be accepted again as members of the public who are free and responsible ones." 

EXPLORING HEALTHCARE ARCHITECTURE THROUGH THE MEDIUM OF FILM: Motives and Techniques

2014 ◽  
Vol 8 (1) ◽  
pp. 29
Author(s):  
Stephen Verderber
Keyword(s):  
Real World ◽  
The Real ◽  
Healthcare Settings ◽  
Interdisciplinary Field ◽  
Body Of Knowledge ◽  
Behavior Setting ◽  
Physical Environments ◽  
Scant Attention ◽  
History Of

The interdisciplinary field of person-environment relations has, from its origins, addressed the transactional relationship between human behavior and the built environment. This body of knowledge has been based upon qualitative and quantitative assessment of phenomena in the “real world.” This knowledge base has been instrumental in advancing the quality of real, physical environments globally at various scales of inquiry and with myriad user/client constituencies. By contrast, scant attention has been devoted to using simulation as a means to examine and represent person-environment transactions and how what is learned can be applied. The present discussion posits that press-competency theory, with related aspects drawn from functionalist-evolutionary theory, can together function to help us learn of how the medium of film can yield further insights to person-environment (P-E) transactions in the real world. Sampling, combined with extemporary behavior setting analysis, provide the basis for this analysis of healthcare settings as expressed throughout the history of cinema. This method can be of significant aid in examining P-E transactions across diverse historical periods, building types and places, healthcare and otherwise, otherwise logistically, geographically, or temporally unattainable in real time and space.

Statistical Management of Food Production Processes

2020 ◽  
pp. 30-35
Author(s):  
N.A. Jurk ◽  
Keyword(s):  
Production Process ◽  
Control Chart ◽  
Food Production ◽  
Time Interval ◽  
Bakery Products ◽  
Shewhart Control ◽  
Manufactured Products ◽  
Mnemonic Technique ◽  
The Stability

The article presents scientific research in the field of statistical controllability of the food production process using the example of bakery products for a certain time interval using statistical methods of quality management. During quality control of finished products, defects in bakery products were identified, while the initial data were recorded in the developed form of a checklist for registering defects. It has been established that the most common defect is packaging leakage. For the subsequent statistical assessment of the stability of the production process and further analysis of the causes of the identified defect, a Shewhart control chart (p-card by an alternative feature) was used, which allows you to control the quality of manufactured products by the number of defects detected. Analyzing the control chart, it was concluded that studied process is conditionally stable, and the emerging defects are random. At the last stage of the research, the Ishikawa causal diagram was used, developed using the 6M mnemonic technique, in order to identify the most significant causes that affect the occurrence of the considered defect in bakery products. A more detailed study will allow the enterprise to produce food products that meet the established requirements.

Improving of quality of gate assembly contact surfaces of high-pressure fi ttings by diamond burnishing

2020 ◽  
pp. 99-104
Author(s):  
S.A. Zaydes ◽  
A.N. Mashukov ◽  
T.Ya. Druzhinina
Keyword(s):  
Surface Roughness ◽  
High Pressure ◽  
Main Part ◽  
Conical Surface ◽  
The Real ◽  
Metal Seal ◽  
Diamond Burnishing ◽  
Air Tightness ◽  
Contact Surfaces

The contact belt of the gate assembly is the main part of high pressure fittings. The serviceability of the fittings assembly as whole depends on the air-tightness and quality of the mating surfaces. The technology of diamond burnishing allows to increase the interface of the nodes by red ucing the surface roughness of the metal-to-metal seal. The real experience for improving of the fittings contact belt due to the use of diamond burnishing of the nozzles seats and the conical surface of the rods.

The real concept of substitution in Ayurveda literature and adulteration the misleading concept of modern era

2018 ◽  
Vol 3 (3) ◽  
Author(s):  
Ashashri Shinde ◽  
Pankaj Gupta ◽  
Sudipt Rath
Keyword(s):  
Medicinal Plant ◽  
Plant Material ◽  
Genetic Parameters ◽  
Herbal Drugs ◽  
Material Identification ◽  
The Real ◽  
Physical Chemical ◽  
Unfair Trade ◽  
Modern Era

A quality drug is central to the success of any therapeutic plan. The quality of drug is determined right from the collection to delivery to the patients. The commonest problem involving the medicinal plant stating materials is intentional or unintentional substitution and adulteration owing to multiple reasons like unavailability, higher costs, unfair trade etc. This trend was also present in the olden days, as evident from the concept of substitute drugs (Pratinidhi Dravya) as available in Yogratanakara, Bhavaprakasha and Bhaishajyaratnawali. Therefore, Charka and later Acharyas also have dealt with authentication and standardization of herbal drugs and formulations in detail by using four Pramanas (tools of knowledge) Ch.Vi.8/87. Nowadays the concept of substitution is entirely converted into intentional and unintentional malpractices of adulteration. The established authenticity parameters for plant material identification and standardization like organoleptic, physical, chemical and genetic parameters are relatively inaccessible for routine use. Not withstanding the accuracy and usefulness of these lab parameters and delay in the development of easy to perform parameters for reasonable drug authentication. These adulteration malpractices spoils the market of herbal industries. In this article we discuss about concept of substitution in ancient Ayurveda and at present intentional and unintentional adulteration practices.

Empresas familiares en zonas marginales. Estrategias de subsistencia y financiación pública en la localidad de ciudad bolívar de Bogotá

2017 ◽  
Vol 7 (12) ◽  
pp. 3
Author(s):  
Jenny Paola Cervera Quintero
Keyword(s):  
Quality Of Life ◽  
Resource Allocation ◽  
Family Business ◽  
City Government ◽  
The Real ◽  
Calidad De Vida ◽  
Institutional Action ◽  
The City

Esta investigación muestra las características y estrategias socioeconómicas identificadas en un grupo de famiempresas de confección en Ciudad Bolívar, localidad de Bogotá, con las cuales logran la permanencia de sus negocios y así la reproducción de la vida y la subsistencia de sus familias. Este primer elemento se contrasta con las políticas de consecución de ingresos desarrolladas por los gobiernos distritales en el período 2000-2013, con el fin de encontrar los elementos comunes y el real aporte con el que las políticas sociales y económicas del Distrito benefician la economía popular de la ciudad, teniendo como referencia el grupo de famiempresas con el que se trabajó. Después de obtener un paralelo entre las políticas socioeconómicas del Distrito y las necesidades reales de las famiempresas, se desarrolla un ejercicio práctico aplicando la metodología de Vester como base para la formulación de recomendaciones dirigidas hacia los gobiernos distritales, en las que se manifiestan las prioridades que esta población objetivo espera de la acción institucional para mejorar el desempeño de sus famiempresas y, por ende, el de su consecución de ingresos para mejor su calidad de vida y la de sus familias.ABSTRACTThis research examines the socio-economic characteristics and strategies pertaining to a group of family business in the apparel sector in Ciudad Bolivar (Bogota), which ensures some stability in the business itself and in their families´ livelihood. This first element is contrasted with the policies of resource allocation pursued by Bogota local administrations in the period 2000-2013, in order to identify the real governmental contributions to thelocal economy. Next, a practical exercise is conducted by applying the methodology of Vester as a basis for the formulation of recommendations addressed to the city government; those recommendations depict the priorities that the targeted population expects from the institutional action to improve the performance of their business and to enhance their income to better their quality of life and that of their families. Fecha de recepción: 23 agosto 2016Fecha de aprobación: 15 noviembre de 2016Fecha de publicación: 6 de enero de 2017

Sign in / Sign up

Export Citation Format

Share Document