scholarly journals Electrically Conductive, Transparent Polymeric Nanocomposites Modified by 2D Ti3C2Tx (MXene)

Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1272 ◽  
Author(s):  
Aisha Tanvir ◽  
Patrik Sobolčiak ◽  
Anton Popelka ◽  
Miroslav Mrlik ◽  
Zdenko Spitalsky ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Flexible Electronics ◽  
Uv Spectroscopy ◽  
Composite Films ◽  
Mechanical Analysis ◽  
Nanocomposite Films ◽  
Max Phase ◽  
Polymeric Nanocomposites ◽  
Electrically Conductive

The electrically conductive, transparent, and flexible self-standing thin nanocomposite films based on copolyamide matrix (coPA:Vestamelt X1010) modified with 2D Ti3C2Tx (MXene) nanosheets were prepared by casting and their electrical, mechanical and optical properties and then, were investigated. The percolation threshold of the MXene filler within the coPA matrix was found to be 0.05 vol. %, and the highest determined electrical conductivity was 1.4 × 10−2 S·cm−1 for the composite filled with 5 wt. % (1.8 vol. %) of MXene. The electrical conductivity of the as-prepared MXene was 9.1 S·cm–1, and the electrical conductivity of the MAX phase (the precursor for MXene preparation) was 172 S·cm–1. The transparency of the prepared composite films exceeded 75%, even for samples containing 5 wt. % of MXene, as confirmed by UV spectroscopy. The dynamic mechanical analysis confirmed the improved mechanical properties, such as the storage modulus, which improved with the increasing MXene content. Moreover, all the composite films were very flexible and did not break under repeated twisting. The combination of the relatively high electrical conductivity of the composites filled with low filler content, an appropriate transparency, and good mechanical properties make these materials promising for applications in flexible electronics.

Polypyrrole/PU hybrid hydrogels: electrically conductive and fast self-healing for the potential application in body-monitor sensor

2021 ◽  
Author(s):  
Zhanyu Jia ◽  
Guangyao Li ◽  
Juan Wang ◽  
shouhua Su ◽  
Jie Wen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Potential Application ◽  
Self Healing ◽  
Electrically Conductive ◽  
Sensor Application ◽  
Hybrid Hydrogels ◽  
Health Monitor

Conductivity, self-healing and moderate mechanical properties are necessary for multifunctional hydrogels which have great potential in health-monitor sensor application. However, the combination of electrical conductivity, self-healing and good mechanical properties...

scholarly journals Effect of SWCNT-Tuball Paper on the Lightning Strike Protection of CFRPs and Their Selected Mechanical Properties

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3140
Author(s):  
Kamil Dydek ◽  
Anna Boczkowska ◽  
Rafał Kozera ◽  
Paweł Durałek ◽  
Łukasz Sarniak ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Copper Foil ◽  
Impact Resistance ◽  
Mechanical Analysis ◽  
Lightning Strike ◽  
Single Wall Carbon Nanotubes ◽  
Carbon Fibre Reinforced Polymer ◽  
The Impact

The main aim of this work was the investigation of the possibility of replacing the heavy metallic meshes applied onto the composite structure in airplanes for lightning strike protection with a thin film of Tuball single-wall carbon nanotubes in the form of ultra-light, conductive paper. The Tuball paper studied contained 75 wt% or 90 wt% of carbon nanotubes and was applied on the top of carbon fibre reinforced polymer before fabrication of flat panels. First, the electrical conductivity, impact resistance and thermo-mechanical properties of modified laminates were measured and compared with the reference values. Then, flat panels with selected Tuball paper, expanded copper foil and reference panels were fabricated for lightning strike tests. The effectiveness of lightning strike protection was evaluated by using the ultrasonic phased-array technique. It was found that the introduction of Tuball paper on the laminates surface improved both the surface and the volume electrical conductivity by 8800% and 300%, respectively. The impact resistance was tested in two directions, perpendicular and parallel to the carbon fibres, and the values increased by 9.8% and 44%, respectively. The dynamic thermo-mechanical analysis showed higher stiffness and a slight increase in glass transition temperature of the modified laminates. Ultrasonic investigation after lightning strike tests showed that the effectiveness of Tuball paper is comparable to expanded copper foil.

scholarly journals Electrically Conductive Networks from Hybrids of Carbon Nanotubes and Graphene Created by Laser Radiation

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1875
Author(s):  
Alexander Yu. Gerasimenko ◽  
Artem V. Kuksin ◽  
Yury P. Shaman ◽  
Evgeny P. Kitsyuk ◽  
Yulia O. Fedorova ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Laser Irradiation ◽  
Flexible Electronics ◽  
Threshold Energy ◽  
Wavelength Region ◽  
Hybrid Nanostructures ◽  
Graphene Sheets ◽  
Electrically Conductive ◽  
Walled Carbon Nanotubes

A technology for the formation of electrically conductive nanostructures from single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT), and their hybrids with reduced graphene oxide (rGO) on Si substrate has been developed. Under the action of single pulses of laser irradiation, nanowelding of SWCNT and MWCNT nanotubes with graphene sheets was obtained. Dependences of electromagnetic wave absorption by films of short and long nanotubes with subnanometer and nanometer diameters on wavelength are calculated. It was determined from dependences that absorption maxima of various types of nanotubes are in the wavelength region of about 266 nm. It was found that contact between nanotube and graphene was formed in time up to 400 fs. Formation of networks of SWCNT/MWCNT and their hybrids with rGO at threshold energy densities of 0.3/0.5 J/cm2 is shown. With an increase in energy density above the threshold value, formation of amorphous carbon nanoinclusions on the surface of nanotubes was demonstrated. For all films, except the MWCNT film, an increase in defectiveness after laser irradiation was obtained, which is associated with appearance of C–C bonds with neighboring nanotubes or graphene sheets. CNTs played the role of bridges connecting graphene sheets. Laser-synthesized hybrid nanostructures demonstrated the highest hardness compared to pure nanotubes. Maximum hardness (52.7 GPa) was obtained for MWCNT/rGO topology. Regularity of an increase in electrical conductivity of nanostructures after laser irradiation has been established for films made of all nanomaterials. Hybrid structures of nanotubes and graphene sheets have the highest electrical conductivity compared to networks of pure nanotubes. Maximum electrical conductivity was obtained for MWCNT/rGO hybrid structure (~22.6 kS/m). Networks of nanotubes and CNT/rGO hybrids can be used to form strong electrically conductive interconnections in nanoelectronics, as well as to create components for flexible electronics and bioelectronics, including intelligent wearable devices (IWDs).

Enhancing the Thermal and Mechanical Characteristics of Polyvinyl Alcohol (PVA)-Hemp Protein Particles (HPP) Composites

2021 ◽  
Vol 36 (2) ◽  
pp. 137-143
Author(s):  
S. A. Awad
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Composite Films ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Decomposition Temperature ◽  
Scanning Calorimetry ◽  
Solution Casting Method ◽  
Protein Particles

Abstract This paper aims to describe the thermal, mechanical, and surface properties of a PVA/HPP blend whereby the film was prepared using a solution casting method. The improvements in thermal and mechanical properties of HPP-based PVA composites were investigated. The characterization of pure PVA and PVA composite films included tensile tests, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results of TGA and DSC indicated that the addition of HPP increased the thermal decomposition temperature of the composites. Mechanical properties are significantly improved in PVA/HPP composites. The thermal stability of the PVA composite increased with the increase of HPP filler content. The tensile strength increased from 15.74 ± 0.72 MPa to 27.54 ± 0.45 MPa and the Young’s modulus increased from 282.51 ± 20.56 MPa to 988.69 ± 42.64 MPa for the 12 wt% HPP doped sample. Dynamic mechanical analysis (DMA) revealed that at elevated temperatures, enhanced mechanical properties because of the presence of HPP was even more noticeable. Morphological observations displayed no signs of agglomeration of HPP fillers even in composites with high HPP loading.

scholarly journals Mechanical Properties and Electrical Discharge Machinability of Alumina-10 vol% Zirconia-28 vol% Titanium Nitride Composites

Ceramics ◽  
2020 ◽  
Vol 3 (2) ◽  
pp. 199-209 ◽  
Author(s):  
Andrea Gommeringer ◽  
Frank Kern
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Composite Material ◽  
Titanium Nitride ◽  
Electrical Discharge ◽  
Fracture Resistance ◽  
High Strength ◽  
Electrically Conductive ◽  
Material Hardness ◽  
Ceramic Components

Electrical discharge machinable ceramics provide an alternative machining route independent on the material hardness which enables manufacturing of customized ceramic components. In this study a composite material based on an alumina/zirconia matrix and an electrically conductive titanium nitride dispersion was manufactured by hot pressing and characterized with respect to microstructure, mechanical properties and ED-machinability by die sinking. The composites show a combination of high strength of 700 MPa, hardness of 17–18 GPa and moderate fracture resistance of 4.5–5 MPa√m. With 40 kS/m the electrical conductivity is sufficiently high to ensure ED-machinability.

scholarly journals Polymer-Single Wall Carbon Nanotube Composites for Potential Spacecraft Applications

2001 ◽  
Vol 706 ◽  
Author(s):  
Cheol Park ◽  
Zoubeida Ounaies ◽  
Kent A. Watson ◽  
Kristin Pawlowski ◽  
Sharon E. Lowther ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Carbon Nanotube ◽  
Composite Films ◽  
Polymeric Materials ◽  
Polymer Nanocomposite ◽  
Weight Percent ◽  
Nanocomposite Films ◽  
Mechanical And Thermal Properties ◽  
Single Wall Carbon Nanotube ◽  
Single Wall Carbon

AbstractPolymer-single wall carbon nanotube (SWNT) composite films were prepared and characterized as part of an effort to develop polymeric materials with improved combinations of properties for potential use on future spacecraft. Next generation spacecraft will require ultra-lightweight materials that possess specific and unique combinations of properties such as radiation and atomic oxygen resistance, low solar absorptivity, high thermal emissitivity, electrical conductivity, tear resistance, ability to be folded and seamed, and good mechanical properties. The objective of this work is to incorporate sufficient electrical conductivity into space durable polyimides to mitigate static charge build-up. The challenge is to obtain this level of conductivity (10-8 S/cm) without degrading other properties of importance, particularly optical transparency. Several different approaches were attempted to fully disperse the SWNTs into the polymer matrix. These included high shear mixing, sonication, and synthesizing the polymers in the presence of pre-dispersed SWNTs. Acceptable levels of conductivity were obtained at loading levels less than one tenth weight percent SWNT without significantly sacrificing optical properties. Characterization of the nanocomposite films and the effect of SWNT concentration and dispersion on the conductivity, solar absorptivity, thermal emissivity, mechanical and thermal properties were discussed. Fibers and non-woven porous mats of SWNT reinforced polymer nanocomposite were produced using electrospinning.

scholarly journals Preparation of Multicomponent Biocomposites and Characterization of Their Physicochemical and Mechanical Properties

2020 ◽  
Vol 4 (1) ◽  
pp. 18
Author(s):  
Yuriy A. Anisimov ◽  
Duncan E. Cree ◽  
Lee D. Wilson
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Physicochemical Properties ◽  
In Situ Polymerization ◽  
Structural Parameters ◽  
Dye Adsorption ◽  
Mechanical Analysis ◽  
Scanning Calorimetry ◽  
Swelling Properties

This work focused on a mutual comparison and characterization of the physicochemical properties of three-component polymer composites. Binary polyaniline–chitosan (PANI–CHT) composites were synthesized by in situ polymerization of PANI onto CHT. Ternary composites were prepared by blending with a third component, polyvinyl alcohol (PVA). Composites with variable PANI:CHT (25:75, 50:50 and 75:25) weight ratios were prepared whilst fixing the composition of PVA. The structure and physicochemical properties of the composites were evaluated using thermal analysis (thermogravimetric analysis (TGA), differential scanning calorimetry (DSC)) and spectroscopic methods (infrared (IR), nuclear magnetic resonance (NMR)). The equilibrium and dynamic adsorption properties of composites were evaluated by solvent swelling in water, water vapour adsorption and dye adsorption isotherms. The electrical conductivity was estimated using current–voltage curves. The mechanical properties of the samples were evaluated using dynamic mechanical analysis (DMA) and correlated with the structural parameters of the composites. The adsorption and swelling properties paralleled the change in the electrical and mechanical properties of the materials. In most cases, samples with higher content of chitosan exhibit higher adsorption and mechanical properties, and lower conductivity. Acid-doped samples showed much higher adsorption, swelling, and electrical conductivity than their undoped analogues.

Electrically Conductive Composite of Polypyrrole and Liquid Crystalline Aromatic Copolyamide

1992 ◽  
Vol 247 ◽  
Author(s):  
Jing-Sheng Bao ◽  
C. C. Xu ◽  
W. Cai ◽  
Xian-Tong Bi
Keyword(s):  
Mechanical Properties ◽  
Liquid Crystalline ◽  
Diphenyl Ether ◽  
Composite Films ◽  
Electrically Conductive ◽  
Electrochemical Preparation ◽  
Conductive Composite ◽  
Order Of Magnitude ◽  
Conductive Composite Film ◽  
Electrically Conductive Composite

ABSTRACTThe modification of the mechanical properties of polypyrrole(PPy) by electrochemical preparation of conductive composite film from pyrrole(Py) and two kinds of liquid crystalline copolyamide of poly(p-phenylene-terephthal- amide)(PPTA) poly(p-phenyleneterephthalamide/diphenyl ether terephthal- amide) (PPTA[0]) and poly(p-phenyleneterephthalamide/diphenyl methane tere-phthalamide) (PPTA[C]) are presented.The electrical conductivity of the PPTA[0]/PPy and PPTA[C]/PPy composites are the same order of magnitude as PPy or PPTA/PPy. The mechanical properties of the composite films are better than that of pure PPy. and the composite films have good electroactivlty and thermalstability.

scholarly journals The Influence of Sonication Processing Conditions on Electrical and Mechanical Properties of Single and Hybrid Epoxy Nanocomposites Filled with Carbon Nanoparticles

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4128
Author(s):  
Matheus Mendes de Oliveira ◽  
Sven Forsberg ◽  
Linnéa Selegård ◽  
Danilo Justino Carastan
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
High Power ◽  
Ternary Systems ◽  
Processing Parameters ◽  
Mechanical Analysis ◽  
Thermomechanical Properties ◽  
Epoxy Nanocomposites ◽  
Crosslinking Degree ◽  
Residual Solvent

Graphene nanoplatelets (GNP) and carbon nanotubes (CNT) are used to enhance electrical and mechanical properties of epoxy-based nanocomposites. Despite the evidence of synergetic effects in the hybrid GNP-CNT-epoxy system, there is still a lack of studies that focus on the influence of different dispersion methods on the final properties of these ternary systems. In the present work, direct and indirect ultrasonication methods were used to prepare single- and hybrid-filled GNP-CNT-epoxy nanocomposites, varying the amplitude and time of sonication in order to investigate their effect on electrical and thermomechanical properties. Impedance spectroscopy was combined with rheology and electron microscopy to show that high-power direct sonication tends to degrade electrical conductivity in GNP-CNT-epoxy nanocomposites due to damage caused in the nanoparticles. CNT-filled samples were mostly benefitted by low-power direct sonication, achieving an electrical conductivity of 1.3 × 10−3 S·m−1 at 0.25 wt.% loading, while indirect sonication was not able to properly disperse the CNTs and led to a conductivity of 1.6 ± 1.3 × 10−5. Conversely, specimens filled with 2.5 wt. % of GNP and processed by indirect sonication displayed an electrical conductivity that is up to 4 orders of magnitude higher than when processed by direct sonication, achieving 5.6 × 10−7 S·m−1. The introduction of GNP flakes improved the dispersion state and conductivity in hybrid specimens processed by indirect sonication, but at the same time impaired these properties for high-power direct sonication. It is argued that this contradictory effect is caused by a selective localization of shorter CNTs onto GNPs due to strong π-π interactions when direct sonication is used. Dynamic mechanical analysis showed that the addition of nanofillers improved epoxy’s storage modulus by up to 84%, but this property is mostly insensitive to the different processing parameters. Decrease in crosslinking degree and presence of residual solvent confirmed by Fourier-transform infrared spectroscopy, however, diminished the glass transition temperature of the nanocomposites by up to 40% when compared to the neat resin due to plasticization effects.

scholarly journals Development of Electrically Conductive Nanocrystalline Thin Film for Optoelectronic Applications

2013 ◽  
Vol 15 ◽  
pp. 90-101 ◽  
Author(s):  
Sujan Kumar Das ◽  
Jahid M.M. Islam ◽  
Monirul Hasan ◽  
Humayun Kabir ◽  
Md Abdul Gafur ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Electrical Properties ◽  
Composite Films ◽  
Young Modulus ◽  
Electrically Conductive ◽  
Elongation At Break ◽  
Ohmic Behavior ◽  
Nanocrystalline Thin Film ◽  
Electrically Conductive Composite

Sodium alginate (TiO2) sand composites were prepared by solution casting. Purified sand was added in the composite films to increase electrical conductivity. Electrical properties such as conductivity, capacitance, dielectric constant, and loss tangent of the composites were investigated. The current voltage characteristics for all the composites showed ohmic behavior. All the electrical properties have been found to improve with the incorporation of sand (SiO2) but 6% sand containing composite exhibits the best electrical properties. The mechanical properties tensile strength (TS), elongation at break (Eb) and Young modulus for 6% sand containing composite film are found to be 4.445 MPa, 9.76%, and 72.8 MPa respectively. The experimental results reveal that the blended films exhibit higher stability and improved mechanical properties of both tensile strength and elongation at break in dry state. Water absorption properties of the composites are found to decrease with the increase of sand content. Lowest water uptake properties and highest stability were demonstrated by 6% sand containing sample. Electrically conductive composite films have useful applications for solar cells and optoelectronics. Thus, this study is very much expected to aid in the design and selection of proper composite for the potential application of solar cell and optoelectronics.

Sign in / Sign up

Export Citation Format

Share Document