scholarly journals Effect of Recycled Shell Waste as a Modifier on the High- and Low-Temperature Rheological Properties of Asphalt

2021 ◽  
Vol 13 (18) ◽  
pp. 10271
Author(s):  
Yuchen Guo ◽  
Xuancang Wang ◽  
Guanyu Ji ◽  
Yi Zhang ◽  
Hao Su ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Low Temperatures ◽  
High Speed ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Temperature Performance

The deteriorating ecological environment and the concept of sustainable development have highlighted the importance of waste reuse. This article investigates the performance changes resulting from the incorporation of shellac into asphalt binders. Seashell powder-modified asphalt was prepared with 5%, 10%, and 15% admixture using the high-speed shear method. The microstructure of the seashell powder was observed by scanning electron microscope test (SEM); the physical-phase analysis of the seashell powder was carried out using an X-ray diffraction (XRD) test; the surface characteristics and pore structure of shellac were analyzed by the specific surface area Brunauer-Emmett-Teller (BET) test; and Fourier infrared spectroscopy (FTIR) qualitatively analyzed the composition and changes of functional groups of seashell powder-modified asphalt. The conventional performance index of seashell powder asphalt was analyzed by penetration, softening point, and ductility (5 °C) tests; the effect of seashell powder on asphalt binder was studied using a dynamic shear rheometer (DSR) and bending beam rheometer (BBR) at high and low temperatures, respectively. The results indicate the following: seashell powder is a coarse, porous, and angular CaCO3 bio-material; seashell powder and the asphalt binder represent a stable physical mixture of modified properties; seashell powder improves the consistency, hardness, and high-temperature performance of the asphalt binder but weakens the low-temperature performance of it; seashell powder enhances the elasticity, recovery performance, and permanent deformation resistance of asphalt binders and improves high-temperature rheological properties; finally, seashell powder has a minimal effect on the crack resistance of asphalt binders at very low temperatures. In summary, the use of waste seashells for recycling as bio-modifiers for asphalt binders is a practical approach.

scholarly journals Rheological Properties of Graphene/Polyethylene Composite Modified Asphalt Binder

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3986
Author(s):  
Huan-Yun Zhou ◽  
Huai-Bing Dou ◽  
Xian-Hua Chen
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
High Speed ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Asphalt Modification ◽  
Ft Ir

Aiming to improve the comprehensive road performance of asphalt binders, especially the high-temperature performance, a novel asphalt binder was prepared by compounding high-quality and low-cost polyethylene (PE) with graphene (GNPs) using a high-speed shearing machine. The rheological properties and interaction mechanism of PE/GNPs composite modified asphalt were investigated using temperature sweep (TeS), multiple stress creep recovery (MSCR), linear amplitude sweep (LAS) and Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FESEM). The experimental results demonstrated that GNPs and PE can synergistically improve the high-temperature performance of asphalt binders and enhance the rutting resistance of pavements; the pre-blended PE/GNPs masterbatch has good medium-temperature fatigue and low-temperature cracking resistance. Meanwhile, PE/GNPs dispersed uniformly in the asphalt matrix, and the microstructure and dispersion of premixed PE/GNPs masterbatch facilitated the asphalt modification. No new absorption peaks appeared in the FT-IR spectra of the composite modified asphalt, indicating that asphalt binders were physically modified with GNPs and PE. These findings may cast light on the feasibility of polyethylene/graphene composite for asphalt modification.

Study of Rheological Properties of Cariphalte Modified Asphalt

2014 ◽  
Vol 638-640 ◽  
pp. 1185-1189
Author(s):  
Tan Hua
Keyword(s):  
Comparative Analysis ◽  
Rheological Properties ◽  
Fatigue Damage ◽  
Systematic Study ◽  
Low Temperatures ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Fatigue Properties ◽  
Dynamic Shear ◽  
Modified Asphalt

To explore the effects of different factors on the rheological properties of cariphalte modified asphalt, based superpave asphalt binder relevant norms, through the use of dynamic shear rheometer Shell 70# asphalt under different temperature, frequency and strain conditions and rheological properties of cariphalte modified asphalt carrying on a systematic study, and comparative analysis of the two anti-fatigue properties of asphalt in the middle and low temperature.The results show that: compared with 70# asphalt, cariphalte modified asphalt has better rutting resistance over a wide temperature range; at lower frequencies and high intensity pavement, cariphalte modified asphalt to better resistance to permanent deformation; better fatigue resistance at low temperatures, and more fatigue damage is not easy to achieve.

scholarly journals Application of biochar from crop straw in asphalt modification

PLoS ONE ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. e0247390
Author(s):  
Xinli Gan ◽  
Wenli Zhang
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
High Temperature ◽  
High Speed ◽  
Asphalt Binder ◽  
Crop Straw ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Asphalt Modification ◽  
Scanning Electron

The objective of this study is to verify the feasibility of using biochar made from crop straw as a bitumen additive to improve some properties of bitumen. The differences between crop straw biochar prepared in a laboratory and commercial charcoal were investigated through scanning electron microscopy and laser particle size analyses. Furthermore, biochar-modified asphalt was prepared using the high-speed shear method, and the penetration, softening point, ductility at 15°C, and apparent viscosity of the asphalt binder with 6% biochar were measured at 120, 135, 150, 160, and 175°C. It was found that both the crop straw biochar and the commercial charcoal consist mainly of C, O, Si, and K, but the C content of crop straw biochar is slightly higher than that of commercial charcoal. The particle size of biochar is smaller than that of commercial charcoal, while the specific surface area is larger. It was determined that the addition of crop straw biochar significantly improved the high-temperature performance of asphalt, and that biochar and commercial charcoal have a similar influence on the high temperature performance of asphalt.

Experimental Study on Polyphosphoric Acid (PPA) Modified Asphalt Binders

2010 ◽  
Vol 152-153 ◽  
pp. 288-294 ◽  
Author(s):  
Wei Dong Cao ◽  
Shu Tang Liu ◽  
Hong Lu Mao
Keyword(s):  
Low Temperature ◽  
Softening Point ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Point Test ◽  
Low Temperature Performance ◽  
Four Levels ◽  
Temperature Susceptibility

Polyphosphric acid (PPA) modified asphalt binders were produced in the laboratory using one base asphalt and four levels of PPA contents (0.6%, 1.0%, 1.5% and 2.0% by weight of base asphalt). Penetration test, softening point test, rotation viscosity test, creep test with bending beam rheometer (BBR) and four components test were carried out to study the performance of PPA modified asphalt binders and possible modification mechanism. The results indicate that the high-temperature performance of PPA modified asphalt binders are obviously improved and temperature susceptibility are decreased, but the low-temperature performance slightly decline compared with base asphalt. The PPA content has a very significant effect on softening point whereas it has no significant influence on low-temperature performance according to variance analysis (ANOVA). Finally, four components test reveals that the primary modification mechanism of PPA is the change of chemical composition of asphalt binder.

scholarly journals Evaluation of Low- and Intermediate-Temperature Performance of Bio Oil-Modified Asphalt Binders

2021 ◽  
Vol 13 (7) ◽  
pp. 4039
Author(s):  
Sara A. Alattieh ◽  
Ghazi G. Al-Khateeb ◽  
Waleed Zeiada
Keyword(s):  
Low Temperature ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Asphalt Binders ◽  
Tensile Stresses ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Bio Oil ◽  
Low Temperature Cracking ◽  
Low Temperature Performance

Fatigue cracking and low-temperature cracking are two major distresses that occur in asphalt pavements. Fatigue cracking is a load-associated distress caused by the tensile stresses at the bottom/top of the asphalt concrete (AC) layer due to repeated traffic loading. On the other hand, low-temperature cracking occurs when tensile stresses built up with in the AC layer at low temperatures exceed the tensile strength of that layer. In this study, the performance of date seeds oil bio-modified asphalt binders (DSO-BMB) is evaluated against fatigue and low-temperature cracking. The DSO-BMBs are prepared using volume ratios of 1.5, 2.5, 3.5, 4.5, and 5.5% date seeds oil-to-asphalt binder. The base asphalt binder used in the study is a 60/70-penetration grade with a Superpave performance grade (PG) of PG 64–16. The dynamic shear rheometer (DSR) standard test was used to assess the fatigue performance of the bio-modified binders (BMBs), while the bending beam rheometer (BBR) test was used to test the BMBs for low-temperature performance. In addition, the DSR linear amplitude sweep (LAS) test was used to evaluate the fatigue tolerance behavior of the DSO-BMBs. The analysis and results of the study showed that the bio-oil enhanced the low-temperature performance. The low PG grade improved from −16 °C for the control asphalt binder to −28 °C for the BMB. Additionally, the fatigue resistance of the BMBs was improved as illustrated by the damage–characteristic curves of the modified asphalt binders from the visco-elastic continuum damage (VECD) analysis and the increase in the number of cycles to fatigue failure (Nf).

scholarly journals Research on Rheological Properties of High-Percentage Artificial RAP Binder with WMA Additives

2020 ◽  
Vol 2020 ◽  
pp. 1-24
Author(s):  
Weiying Wang ◽  
Songchang Huang ◽  
Yongchun Qin ◽  
Yiren Sun ◽  
Rui Dong ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Asphalt Binder ◽  
Creep Recovery ◽  
Recycled Asphalt ◽  
Reclaimed Asphalt ◽  
Temperature Performance ◽  
Huge Impact ◽  
Polyethylene Wax

With the development of pavement recycling technology, the requirement of reclaimed asphalt pavement (RAP) is substantially increasing. Warm-mix recycled asphalt (WMRA) technology has made great progress, which can effectively decrease the working temperature and improve the RAP content. In this study, the rheological properties of recycled binders with incorporation of high-percentage artificial RAP binder (30–70%) were evaluated using two types of warm-mix asphalt (WMA) additives, i.e., polyethylene wax R and surfactant M. The dynamic shear rheometer (DSR) and beam bending rheometer (BBR) tests were conducted on the recycled binders. The results showed that the temperature and frequency played an important role in determining the complex shear modulus of the high-percentage WMRA binders. The dependency of phase angle on frequency increased after the long-term aging. The WMA additive R had a relatively huge impact on the rheological properties of asphalt, which mainly occurred before the PAV aging of recycled asphalt binder; the WMA additive M had no significant impact on the rheological properties of recycled asphalt binder. The WMA additive R enhanced the low-temperature rheology of recycled asphalt binder, while the WMA additive M enhanced the high-temperature rheology of recycled asphalt binder. Both of these types of WMA additives improved the antifatigue performance of recycled asphalt binder. The increased content of RAP binder improved the high-temperature performance and reduced the low-temperature performance of the recycled asphalt binder. However, it had no obvious impact on the fatigue performance. In addition, there was a good linear relation between the RAP binder content and the two indexes of the multiple stress creep recovery (MSCR) test.

scholarly journals Performance Evaluation of Bone Glue-Modified Asphalt

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Asif Ali ◽  
Naveed Ahmad ◽  
Muhammad Adeel ◽  
Syed Bilal Ahmed Zaidi ◽  
Muhammad Sohail Jameel ◽  
...  
Keyword(s):  
High Temperature ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Cost Effective ◽  
Sem Analysis ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
And Performance ◽  
Bone Glue

Asphalt is one of the primary materials that are extensively used by the pavement industry throughout the world. Its behaviour is highly dependent on the amount of loading and the level of temperature it is exposed to. Asphalt has been modified in the past with different additives to improve its high- or low-temperature properties. In Pakistan, temperature remains high for most of the time of the year; hence, asphalt binders with less susceptibility to higher temperatures are preferred for flexible pavements. Acids, polymers, fibers, and extenders have been used by the researchers to improve high-temperature performance of asphalt mixture. In the present study, a bio material derived from the animal waste, named as bone glue (BG), has been used with the 60/70 penetration grade binder in dosages of 3%, 6%, 9%, and 12% by weight of asphalt binder. The bone glue is produced from a sustainable source. It is a cost-effective and eco-friendly material. Moreover, it produces a durable and nonhazardous asphalt composite. The influence of addition of bone glue on asphalt binder was evaluated using different testing techniques which include consistency tests, rheological analysis, and adhesion tests. Furthermore, different performance tests were conducted on bone glue-modified asphalt mixtures. Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analysis were carried out to ensure the homogeneity and proper mixing of bone glue in asphalt binder. The results from the tests reveal that bone glue stiffens the asphalt binder hence enhancing its high temperature performance. Bone glue dosage of 9% by weight of the binder was found to be the optimum dosage based on the rheological and performance analysis.

scholarly journals A Compressive Review on High- and Low-Temperature Performance of Asphalt Modified with Nanomodifier

2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Limin Li ◽  
Lingming Yang ◽  
Yuliang Lin ◽  
Xiancai Zhang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Binder ◽  
Systematic Investigation ◽  
Nanoparticle Size ◽  
Asphalt Binders ◽  
Temperature Performance ◽  
Low Temperature Performance ◽  
The Difference ◽  
Low Performance

At present, rutting and cracking have become serious issues in asphalt pavement, especially in the areas of summer heat and winter cold. Nanomodifier has been widely used in recent years due to its unique properties in improving the characteristics of asphalt binders. To make better use of nanomodifier to solve the problem of rutting and cracking of pavement, a compressive review on the high- and low-temperature performance of nanomodified asphalt is performed. The results indicate that for high- and low-temperature performance of asphalt binder, the effectiveness of nanomodification is found to be strictly influenced by the combination of original asphalt type, nanomodifier type, nanomodifier dosage, nanoparticle size, and preparation of nanomodified asphalt, and the high-temperature antirutting performance and low-temperature crack resistance of final blends are various with the combination. Chemical composition, microstructure, dispersion, and compatibility of final blends were the possible reason causing the difference. The rational selection of the combination can improve the high-temperature rutting resistance and the low-temperature cracking resistance of asphalt binder. So far, there is a lack of systematic investigation in this regard. Therefore, it is very necessary to study systematically the original asphalt, nanomodifier, nanomodifier dosage, nanoparticle size, and preparation of nanomodified asphalt effect on the high and low performance of nanomodified asphalt, especially in the modification mechanism in the future.

Preparation and Properties of Nanoclay/TPS/Asphalt Ternary Binders

2009 ◽  
Vol 620-622 ◽  
pp. 497-500 ◽  
Author(s):  
Shao Peng Wu ◽  
Jin Gang Wang ◽  
Yuan Zhang
Keyword(s):  
Rheological Properties ◽  
High Speed ◽  
Complex Modulus ◽  
Preliminary Investigation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Frequency Sweep ◽  
Modified Asphalt ◽  
Aging Resistance ◽  
Before And After

After a preliminary investigation on the binary asphalt/clay binder, the ternary binder was prepared by adding the nanoclay and TAFPACK-SUPER (TPS) to the original asphalt. The previous research shows that exfoliated/intercalated layers homogeneously are dispersed in the asphalt matrix and the nanocomposite has formed. Rotation Thin Film Oven Test (RTFOT) and Pressure Age Vessel Test (PAV) results indicate that the modified asphalt with 3% organic nano-montmorillonite (OMMT) present better performance of aging resistance. The purpose of this research is to attain ternary asphalt binder with better rheological performance and aging resistance. The ternary modified asphalt binder containing 4% OMMT and 12% TPS by weight were prepared at the laboratory scale using high speed shearing mixer. The rheological properties of OMMT/TPS modified asphalt binders were evaluated before and after aging in present paper. Temperature sweep tests and frequency sweep tests were conducted to characterize the rheological properties of modified asphalt using Dynamic Shear Rheometer (DSR). According to the frequency sweep tests, complex modulus master curves were plotted to analysis the rheological properties. The results indicate that nanoclay/TPS/asphalt ternary binders have more excellent performance of rheological and aging resistance at both high and low temperatures, compared with the virginal bitumen and TPS modified asphalt.

Comparative analysis on rheological characteristics of different modified asphalt based on DSR and BBR evaluation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Guangyuan Wu ◽  
Haitao Zhang ◽  
Junfeng Sun ◽  
Tengjiang Yu
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Model Parameters ◽  
Content Type ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Low Temperature Performance ◽  
Sbs Modified Asphalt ◽  
Main Curve

Purpose In order to evaluate the rheological properties of asphalt more comprehensively and effectively, and to explore and discuss the practicability of relevant models in the evaluation of the rheological properties of asphalt. Design/methodology/approach Based on the rheological and viscoelastic theories, temperature scanning, frequency scanning and multiple stress creep recovery (MSCR) tests of different modified asphalt were carried out by dynamic shear rheometer (DSR) to obtain relevant viscoelastic parameters and evaluate the high temperature properties of different modified asphalt. Based on the time-temperature equivalence principle, the main curve was constructed to study the viscoelastic properties of asphalt in a wider frequency domain. The main curve was fitted with the CAM model, and the rheological properties of different modified asphalt were evaluated through the analysis of model parameters. The creep stiffness and creep velocity of different modified asphalt were obtained through the rheological test of bending beam (BBR), and the low-temperature performance of different modified asphalt was analyzed by using Burgers model to fit the creep compliance. Findings The results show that the high temperature rheological properties of several modified asphalt studied in the test are ranked from best to worst as follows: PE modified asphalt > SBS modified asphalt > SBR modified asphalt. Short-term aging can improve the high temperature performance of asphalt, and different types of modifiers can promote or inhibit this improvement effect. Based on BBR test and Burgers model fitting analysis, SBR modified asphalt has the best low temperature performance, followed by SBS modified asphalt, while PE modified asphalt has poor low temperature performance, so it is not suitable to be used as road material in low temperature area. Originality/value Combined with effective evaluation methods, the rheological properties of asphalt at different temperatures and angles were systematically evaluated, and the evolution of rheological properties of asphalt characterized by model parameters was further analyzed by advanced model simulation.

Sign in / Sign up

Export Citation Format

Share Document