scholarly journals Wind structure influence on pressure coefficient distribution on the surface of circular cylinder of the diameter 20 cm

2012 ◽  
Vol 10 (1) ◽  
pp. 081-092
Author(s):  
Tomasz Lipecki ◽  
Jarosław Bęc ◽  
Ewa Błazik-Borowa
Keyword(s):  
Circular Cylinder ◽  
Vertical Profile ◽  
Pressure Coefficient ◽  
Coefficient Distribution ◽  
Wind Structure ◽  
Power Spectral ◽  
Mean Pressure ◽  
Mean Wind Speed ◽  
Spectral Density Functions ◽  
D 20

The paper deals with results and analyses of the model investigations which were performed in wind tunnel and were focused on the flow around single circular cylinder. Presented results are related to variations in the distribution of the normalized mean pressure coefficient on the surface of the model as well as its standard deviation. Sic cases of the approaching flow were taken into consideration. The flow was described by vertical profile of the mean wind speed, vertical profile of the intensity of turbulence, and power spectral density functions. The height and dimension of the model were respectively equal: H = 100 cm, D = 20 cm. Selected results of measurements have been shown in the paper as the effect of these experiments.

scholarly journals Wind structure influence on surface pressures of rectangular cylinders of cross-section dimensions 10 cm x 20 cm

2012 ◽  
Vol 10 (1) ◽  
pp. 069-080
Author(s):  
Tomasz Lipecki ◽  
Ewa Błazik-Borowa ◽  
Jarosław Bęc
Keyword(s):  
Cross Section ◽  
Pressure Coefficient ◽  
Wind Pressure ◽  
Wind Speed Profile ◽  
Wind Structure ◽  
Power Spectral ◽  
Mean Wind Speed ◽  
Spectral Density Functions ◽  
Wind Pressure Coefficient ◽  
Rectangular Cylinders

The paper deals with results of measurements which have been carried out in the wind tunnel. Vertical, fixed prism of the cross-section dimensions 10 cm x 20 cm was the object of the experiment. Distributions of mean wind pressure coefficient on the surface of the prism were accepted as results presentation. The following parameters of the wind structure were analysed: vertical mean wind speed profile, turbulence intensity profile, power spectral density functions with respect to their influence on pressure coefficient values. Changes of the angle of wind attack were taken into consideration.

scholarly journals The influence of the wind structure definition in the standard k-ε model of turbulence on the distribution of pressure coefficient on the façades of the prism

2012 ◽  
Vol 10 (1) ◽  
pp. 093-104
Author(s):  
Paulina Jamińska
Keyword(s):  
Kinetic Energy ◽  
Pressure Coefficient ◽  
Experimental Studies ◽  
Turbulence Kinetic Energy ◽  
Wind Pressure ◽  
Ansys Fluent ◽  
Coefficient Distribution ◽  
Wind Structure ◽  
Wind Pressure Coefficient ◽  
Definition Of

The paper deals with the influence of the definition of turbulence kinetic energy k and dissipation of turbulence kinetic energy ε on wind pressure coefficient distribution on walls of rectangular model. The investigation includes computer simulations for the four cases of boundary conditions, the most common in the literature. In some analysed cases, the wind structure characteristics used in computations were derived from experimental studies performed in the wind tunnel. The results in the form of pressure coefficients were analyzed on the basis of their relevance to the use in the field of wind engineering. All calculations were performed in ANSYS FLUENT with use of standard k-ε model. The 3D model of the flow around the prism was considered in calculations.

scholarly journals Wind action on flat roofs

2014 ◽  
Vol 13 (2) ◽  
pp. 239-246
Author(s):  
Tomasz Lipecki
Keyword(s):  
Wind Tunnel ◽  
Cross Section ◽  
Pressure Coefficient ◽  
Wind Engineering ◽  
Wind Action ◽  
High Rise ◽  
Wind Structure ◽  
University Of Technology ◽  
Mean Pressure ◽  
Flat Roofs

The paper deals with the wind action on flat roofs of rectangular shapes which can be considered for medium-rise and high-rise buildings. Distributions of mean pressure coefficient Cp on flat roofs were measured. All analyses were based on model measurements which had been performed in the boundary layer wind tunnel in Wind Engineering Laboratory of Cracow University of Technology. Vertical, fixed in the floor of the wind tunnel on the turn table rectangular prisms of the ratio of cross-section dimensions 1:2 and 1:4 were investigated. Measurements were carried out for the angle of wind attack in the range 0°-90°, every 15°. The influence of the wind structure on pressures was investigated in six different cases of the approaching wind.

Prediction of Atmospheric Turbulence Characteristics for Surface Boundary Layer using Empirical Spectral Methods

2020 ◽  
Author(s):  
Yagya Dutta Dwivedi ◽  
Vasishta Bhargava Nukala ◽  
Satya Prasad Maddula ◽  
Kiran Nair
Keyword(s):  
Boundary Layer ◽  
Time Series ◽  
Surface Roughness ◽  
Wind Speed ◽  
Atmospheric Turbulence ◽  
Surface Boundary ◽  
Low Frequencies ◽  
Surface Boundary Layer ◽  
Power Spectral ◽  
Mean Wind Speed

Abstract Atmospheric turbulence is an unsteady phenomenon found in nature and plays significance role in predicting natural events and life prediction of structures. In this work, turbulence in surface boundary layer has been studied through empirical methods. Computer simulation of Von Karman, Kaimal methods were evaluated for different surface roughness and for low (1%), medium (10%) and high (50%) turbulence intensities. Instantaneous values of one minute time series for longitudinal turbulent wind at mean wind speed of 12 m/s using both spectra showed strong correlation in validation trends. Influence of integral length scales on turbulence kinetic energy production at different heights is illustrated. Time series for mean wind speed of 12 m/s with surface roughness value of 0.05 m have shown that variance for longitudinal, lateral and vertical velocity components were different and found to be anisotropic. Wind speed power spectral density from Davenport and Simiu profiles have also been calculated at surface roughness of 0.05 m and compared with k−1 and k−3 slopes for Kolmogorov k−5/3 law in inertial sub-range and k−7 in viscous dissipation range. At high frequencies, logarithmic slope of Kolmogorov −5/3rd law agreed well with Davenport, Harris, Simiu and Solari spectra than at low frequencies.

Drag Reduction of the Flow Past a Circular Cylinder in Surfactant Solution

2001 ◽  
Author(s):  
Satoshi Ogata ◽  
Keizo Watanabe
Keyword(s):  
Circular Cylinder ◽  
Drag Reduction ◽  
Sodium Salicylate ◽  
Tap Water ◽  
Pressure Coefficient ◽  
Surfactant Solution ◽  
Reduction Ratio ◽  
Number Range ◽  
Surfactant Solutions ◽  
Maximum Drag Reduction

Abstract The flow around a circular cylinder in surfactant solution was investigated experimentally by measurement of the pressure and velocity profiles in the Reynolds number range 6000 < Re < 50000. The test surfactant solutions were aqueous solutions of Ethoquad O/12 (Lion Co.) at concentrations of 50, 100 and 200 ppm, and sodium salicylate was added as a counterion. It was clarified that the pressure coefficient of surfactant solutions in the range of 10000 < Re < 50000 at the behind of the separation point was larger than that of tap water, and the separation angle increased with concentration of the surfactant solution. The velocity defect in surfactant solutions behind a circular cylinder was smaller than those in tap water. The drag coefficients of a circular cylinder in surfactant solutions were smaller than those of tap water in the range 10000 < Re < 50000, and no drag reduction occurred at Re = 6000. The drag reduction ratio increased with increasing concentration of surfactant solution. The maximum drag reduction ratio was approximately 35%.

scholarly journals The drag-adjoint field of a circular cylinder wake at Reynolds numbers 20, 100 and 500

2013 ◽  
Vol 730 ◽  
pp. 145-161 ◽  
Author(s):  
Qiqi Wang ◽  
Jun-Hui Gao
Keyword(s):  
Circular Cylinder ◽  
Flow Field ◽  
Unsteady Flow ◽  
Numerical Solutions ◽  
Reynolds Numbers ◽  
Adjoint Equations ◽  
Cylinder Wake ◽  
Near Wake ◽  
Navier Stokes Equation ◽  
D 20

AbstractThis paper analyses the adjoint solution of the Navier–Stokes equation. We focus on flow across a circular cylinder at three Reynolds numbers, ${\mathit{Re}}_{D} = 20, 100$ and $500$. The quantity of interest in the adjoint formulation is the drag on the cylinder. We use classical fluid mechanics approaches to analyse the adjoint solution, which is a vector field similar to a flow field. Production and dissipation of kinetic energy of the adjoint field is discussed. We also derive the evolution of circulation of the adjoint field along a closed material contour. These analytical results are used to explain three numerical solutions of the adjoint equations presented in this paper. The adjoint solution at ${\mathit{Re}}_{D} = 20$, a viscous steady state flow, exhibits a downstream suction and an upstream jet, the opposite of the expected behaviour of a flow field. The adjoint solution at ${\mathit{Re}}_{D} = 100$, a periodic two-dimensional unsteady flow, exhibits periodic, bean-shaped circulation in the near-wake region. The adjoint solution at ${\mathit{Re}}_{D} = 500$, a turbulent three-dimensional unsteady flow, has complex dynamics created by the shear layer in the near wake. The magnitude of the adjoint solution increases exponentially at the rate of the first Lyapunov exponent. These numerical results correlate well with the theoretical analysis presented in this paper.

The Effect of Turning Angle on the Loss Generation of LP Turbines

2017 ◽  
Author(s):  
Diego Torre ◽  
Guillermo Garcia-Valdecasas ◽  
David Cadrecha
Keyword(s):  
High Speed ◽  
Pressure Coefficient ◽  
Experimental Results ◽  
Cfd Simulations ◽  
Airfoil Surface ◽  
High Lift ◽  
Turning Angle ◽  
Pressure Losses ◽  
Coefficient Distribution ◽  
Inlet Angle

The effect of turning angle on the loss generation of Low Pressure (LP) Turbines has been investigated experimentally in a couple of turbine high-speed rigs. Both rigs consisted of a rotor-stator configuration. All the airfoils are high lift and high aspect ratio blades that are characteristic of state of the art LP Turbines. Both rigs are identical with exception of the stator. Therefore, two sets of stators have been manufactured and tested. The aerodynamic shape of both stators has been designed in order to achieve the same spanwise distribution of Cp (Pressure coefficient) over the airfoil surface, each one to its corresponding turning angles. Exit angle in both stators is the same. Therefore the change in turning is obtained by a different inlet angle. The aim of this experiment is to obtain the sensitivity of profile and endwall losses to turning angle by means of a back-to-back comparison between both sets of airfoils. Because the two sets of stators maintain the same pressure coefficient distribution, Reynolds number and Mach number, each one to its corresponding velocity triangles, one can state that the results are only affected by the turning angle. Experimental results are presented and compared in terms of area average, radial pitchwise average distributions and exit plane contours of total pressure losses. CFD simulations for the two sets of stators are also presented and compared with the experimental results.

A Model for High-Reynolds-Number Flow Past Rough-Walled Circular Cylinders

1977 ◽  
Vol 99 (3) ◽  
pp. 486-493 ◽  
Author(s):  
O. Gu¨ven ◽  
V. C. Patel ◽  
C. Farell
Keyword(s):  
Boundary Layer ◽  
Surface Roughness ◽  
Circular Cylinder ◽  
Turbulent Boundary Layer ◽  
Pressure Coefficient ◽  
Empirical Relation ◽  
Reynolds Numbers ◽  
Boundary Layer Separation ◽  
Circular Cylinders ◽  
Mean Flow

A simple analytical model for two-dimensional mean flow at very large Reynolds numbers around a circular cylinder with distributed roughness is presented and the results of the theory are compared with experiment. The theory uses the wake-source potential-flow model of Parkinson and Jandali together with an extension to the case of rough-walled circular cylinders of the Stratford-Townsend theory for turbulent boundary-layer separation. In addition, a semi-empirical relation between the base-pressure coefficient and the location of separation is used. Calculation of the boundary-layer development, needed as part of the theory, is accomplished using an integral method, taking into account the influence of surface roughness on the laminar boundary layer and transition as well as on the turbulent boundary layer. Good agreement with experiment is shown by the results of the theory. The significant effects of surface roughness on the mean-pressure distribution on a circular cylinder at large Reynolds numbers and the physical mechanisms giving rise to these effects are demonstrated by the model.

Channel-Confined Wake Structure Interactions Between Two Permeable Side-By-Side Bars of a Square Cross-Section

2021 ◽  
Author(s):  
Saqib Jamshed ◽  
Amit Dhiman
Keyword(s):  
Cross Section ◽  
Vortex Shedding ◽  
Pressure Coefficient ◽  
Flow Characteristics ◽  
Darcy Number ◽  
Drag Forces ◽  
Coefficient Distribution ◽  
Wake Patterns ◽  
Lower Permeability ◽  
The Impact

Abstract The current research focuses on the laminar flow through permeable side-by-side bars of a square cross-section in a channel-confined domain. Vorticity generation on the leeward sides of the permeable bodies further necessitates the study for a better understanding of underlying physics. Reynolds number Re and Darcy number Da are varied from 5 to 150 and 10-6 to 10-2, respectively, at transverse gap ratios s/d=2.5-10. In the perspective of periodic unsteady flow, critical Re for the onset of vortex shedding is analyzed. Streamlines, vorticity, pressure coefficient distribution, and velocity profiles are discussed to identify the wake patterns. In lower permeability level, vortex-shedding from the permeable square cylinders is observed either in synchronized anti-phase mode or a single large vortex street with a synchronized in-phase pattern in the near wake. A steady-state wake pattern symmetric and flocked towards the centerline is observed for all s/d at a higher permeability level regardless of Re. Wake patterns are not altered for Da=10-6-10-3; instead, prompt extermination of the two vortex streets downstream is observed at Da=10-3 as compared to Da=10-6. The impact of s/d, Re, and permeability on the drag is examined. A jump in the flow characteristics and drag forces is noticed at higher Re for the mid-range Da remarkably at lower s/d. For the extent of high permeability, the drag coefficient asymptotically gets closer to zero.

Three-Dimensional Effects on Slamming Loads

2021 ◽  
Author(s):  
Shan Wang ◽  
C. Guedes Soares
Keyword(s):  
3D Model ◽  
Numerical Solutions ◽  
Pressure Coefficient ◽  
Three Dimensional ◽  
The Body ◽  
Navier Stokes ◽  
Courant Number ◽  
Dimensional Effects ◽  
Coefficient Distribution ◽  
Experimental Values

Abstract Three-dimensional effects on slamming loads predictions of a ship section are investigated numerically using the unsteady incompressible Reynolds-Average Navier-Stokes (RANS) equations and volume of fluid (VOF) method, which are implemented in interDyMFoam solver in open-source library OpenFoam. A convergence and uncertainty study is performed considering different resolutions and constant Courant number (CFL) following the ITTC guidelines. The numerical solutions are validated through comparisons of slamming loads and motions between the CFD simulations and the available experimental values. The total slamming force and slamming pressures on a 2D ship section and the 3D model are compared and discussed. Three-dimensional effects on the sectional force and the pressures are quantified both in transverse and longitudinal directions of the body considering various entry velocities. The non-dimensional pressure coefficient distribution on the 3D model is presented.

Sign in / Sign up

Export Citation Format

Share Document