Rapid Deposition of Hydroxyapatite on Mg-Alloy by Biomineralization Method

2011 ◽  
Vol 413 ◽  
pp. 160-165 ◽  
Author(s):  
Chen Yang Xu ◽  
Qi Wang ◽  
Hong Yu Ban ◽  
Wei Xu
Keyword(s):  
Simulated Body Fluid ◽  
Body Fluid ◽  
Mg Alloy ◽  
Alloy Sample ◽  
X Ray Diffraction ◽  
X Ray ◽  
Apatite Coating ◽  
Sbf Solution ◽  
Future Practice ◽  
Energy Disperse Spectroscopy

Rapid deposition of hydroxyapatite on Mg-alloy in concentrated simulated body fluid (5×SBF) and modified simulated body fluid (m-SBF) was investigated. By biomineralization method, hydroxyapatite coating was deposited on Mg-alloy with pre-calcification treatment. Scanning electron microscope (SEM), energy disperse spectroscopy (EDS) and X-ray diffraction instrument (XRD) were applied to analyze the deposition product of biomineralization and the related mechanism. The results showed that pre-calcification treatment on Mg-alloy can lead to a quite rapid deposition of hydroxyapatite. Ionic concentrations in SBF solutions affected the structure of hydroxyapatite greatly. A homogeneous plate-like apatite coating was induced on Mg alloy sample in m-SBF solution which is promising for the future practice.

The Effect of Initial pH on Morphology of Biomimetic Apatite Coating

2007 ◽  
Vol 330-332 ◽  
pp. 757-760 ◽  
Author(s):  
Hai Bo Qu ◽  
Mei Wei
Keyword(s):  
Body Fluid ◽  
Environmental Scanning ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ph Values ◽  
Biomimetic Apatite ◽  
Apatite Coating ◽  
Initial Ph ◽  
Biomimetic Method ◽  
Sbf Solution

Bone-like apatite coatings were prepared using a biomimetic method in a simulated body fluid (SBF). The effect of initial pH values on the surface morphology of biomimetic apatite coating was studied. The coatings were characterized using X-ray diffraction and environmental scanning electron microscope. It was revealed that the morphology of the biomimetic apatite coating could be tailored by manipulating the initial pH of the SBF solution.

scholarly journals Role of Vanadium Additions on the Corrosion Mitigation of Ti-6Al-xV Alloy in Simulated Body Fluid

Metals ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 903 ◽  
Author(s):  
El-Sayed M. Sherif ◽  
Sameh A. Ragab ◽  
Hany S. Abdo
Keyword(s):  
Simulated Body Fluid ◽  
Body Fluid ◽  
Immersion Time ◽  
Electrochemical Impedance ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cyclic Potentiodynamic Polarization ◽  
Elemental Analyses ◽  
Corrosion Behaviors

The manufacturing of different Ti-6Al-xV (x = 2, 4, 6, and 8 wt.%) alloys using a mechanical alloying technique was reported. The corrosion behaviors of these newly fabricated alloys after 1, 24, and 48 h exposure to a simulated body fluid (SBF) were assessed using cyclic potentiodynamic polarization, electrochemical impedance spectroscopy, and chronoamperometric measurements. Surface morphology and elemental analyses after corrosion for 48 h in SBF were reported using scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) examinations. An X-ray diffraction investigation characterized the phase analyses. All results indicated that the increase of V content significantly decreases both uniform and pitting corrosion. This effect also increases with prolonging the immersion time to 48 h before measurement.

In Vitro Study of Microplasma Sprayed Hydroxyapatite Coatings in Simulated Body Fluid

2009 ◽  
Vol 79-82 ◽  
pp. 815-818 ◽  
Author(s):  
Qiu Ying Zhao ◽  
Ding Yong He ◽  
Xiao Yan Li ◽  
Jian Min Jiang
Keyword(s):  
Simulated Body Fluid ◽  
Body Fluid ◽  
Carbonate Apatite ◽  
In Vitro Test ◽  
X Ray Diffraction ◽  
X Ray ◽  
Amorphous Phases ◽  
Hydroxyapatite Coatings ◽  
Vitro Test

Hydroxyapatite (HA) coatings were deposited onto Ti6Al4V substrate by microplasma spraying (MPS) in the current research. The morphology, phase compositions, and percentage of crystallinity of the coatings were characterized by means of scanning electron microscopy (SEM) and X-ray diffraction. An in vitro evaluation by soaking the coatings in simulated body fluid (SBF) for up to 14 days was conducted aiming at the evaluation of their bioactivity. Results from the present investigation suggest that microplasma sprayed HA coatings exhibited certain roughness, pores, and microcracks. Thermal decomposition existed in the coatings where HA, α-TCP，β-TCP, amorphous phases, and CaO-exclusive impurities were observed. The in vitro test indicated that HA coatings deposited by MPS possessed better bioactivity and stability. A layer of carbonate-apatite covered most of the coating surface, which did not exhibit significant spalling after incubation in SBF.

scholarly journals The Atomic-Scale Interaction of Bioactive Glasses with Simulated Body Fluid

2005 ◽  
Vol 480-481 ◽  
pp. 21-26 ◽  
Author(s):  
L.J. Skipper ◽  
F.E. Sowrey ◽  
D.M. Pickup ◽  
R.J. Newport ◽  
K.O. Drake ◽  
...  
Keyword(s):  
Simulated Body Fluid ◽  
Body Fluid ◽  
Sol Gel ◽  
Atomic Scale ◽  
X Ray Diffraction ◽  
Bioactive Glasses ◽  
Edge Structure ◽  
X Ray ◽  
X Ray Absorption

The formation of a carbonate-containing hydroxyapatite, HCAp, layer on bioactive calcium silicate sol-gel glass of the formula (CaO)0.3(SiO2)0.7 has been studied in-vitro in Simulated Body Fluid (SBF). Extended X-ray Absorption Fine Structure (EXAFS), X-ray Absorption Near Edge Structure (XANES), X-ray diffraction (XRD), and solid state nuclear magnetic resonance (NMR) measurements have been performed with results showing the formation of a significantly amorphous HCAp layer after less than 5 hours in solution.

Ceramic Coatings of Magnesium Alloy for Biomaterial Applications

2010 ◽  
Vol 434-435 ◽  
pp. 634-637 ◽  
Author(s):  
Pu Liang Zhang ◽  
Bin Liu ◽  
Dong Zhang ◽  
Yong Wei Tao ◽  
Sheng Rong Yang ◽  
...  
Keyword(s):  
Body Fluid ◽  
Ceramic Coatings ◽  
Alkaline Treatment ◽  
Mg Alloy ◽  
X Ray Diffraction ◽  
Electrodeposition Technique ◽  
Corrosion Properties ◽  
X Ray ◽  
Micro Arc Oxidation ◽  
Porous Oxide

Ceramic coatings were produced on magnesium (Mg) alloy of AZ91D for biomaterial applications by micro-arc oxidation (MAO) and electrodeposition methods. The morphology, microstructure, phase composition and corrosion properties of the prepared coatings were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD) and potentiodynamic polarization tester, etc. The results indicated that a porous oxide layer was grown on the Mg alloy sheets after MAO process and the compositions of oxides were mainly Mg2SiO4 and MgO. After further electrodeposition and alkaline treatment, a flake-like structure diverging from centre to periphery was grown on the MAO coating and the coating was mainly made up of hydroxyapatite (HA). Moreover, the corrosion resistance of the Mg alloy after being treated with MAO and electrodeposition technique increases obviously, which was evaluated in stimulated body fluid (SBF).

scholarly journals Effect of Zn Content on Orthopedic Mg aAlloy as Smart Implant

2020 ◽  
Vol 71 (6) ◽  
pp. 96-110
Author(s):  
Omyma Ramadan Mohammed Khalifa ◽  
Abdel-Wahab Abd Elhamid Ali ◽  
Aisha Kassab ◽  
Amal Hemida Tilp ◽  
Marwa Mohamed Mohamed Mohamed Esmail
Keyword(s):  
Corrosion Resistance ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Biomedical Applications ◽  
Orthopedic Implants ◽  
X Ray Diffraction ◽  
Electro Deposition ◽  
X Ray ◽  
Zn Content ◽  
The Media

In recent years, smart implants take the most attention in the field of bone manufacturing. Our study seeks to develop the biodegradability of Mg alloys to use orthopedic implants for the biomedical applications to avoid post removal of the implant. Mg and Zn are very important to human body and have no toxicity. Mg - 6% wt Zn biodegradability is studied in simulated body fluid for two and four weeks. Four electro-deposition bathes are used to deposit a coat on the substrate to improve the corrosion resistance of this alloy in the media of simulated body fluid. The following analyses were studied to emphasize the research aim. Scanning electron microscope (SEM), Energy dispersive X-Ray (EDX) analysis shows the surface morphology and the elements of the coat phases components. The results also confirmed by X-Ray diffraction Pattern (XRD) that show the phases that confirmed the formation of hydroxyapatite HA phase, Fourier-Transform Infrared Spectroscopy (FTIR) to investigate the functional groups of the phases coats that confirm the formation of hydroxyapatite and the electrochemical measurements that investigate the improvement of corrosion resistance. The results indicated that the fourth bath gives the best coat and four weeks immersion gives more corrosion resistance than two weeks.

Fast Synthesis of Rutile/Apatite Core/Shell Structured Photocatalyst in Simulated Body Fluid

2012 ◽  
Vol 465 ◽  
pp. 66-71 ◽  
Author(s):  
Fu Zhi Shi ◽  
Yao Gang Li ◽  
Hong Zhi Wang ◽  
Qing Hong Zhang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Soaking Time ◽  
X Ray ◽  
Transmission Electron ◽  
Tio2 Microspheres

The core/shell structured rutile/apatite was prepared by soaking rutile TiO2 (R-TiO2) microspheres into a simulated body fluid (SBF) only for 1 day. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray (EDX) and N2 adsorption measurements. XRD showed that the apatite content increased with prolonging the soaking time or increasing the SBF concentration. TEM and EDX demonstrated that apatite had been coated on the surface of R-TiO2 microspheres successfully. HRTEM indicated that the lattice spacings of 0.27 nm and 0.32 nm were assigned to (211) plane of apatite and (101) plane of R-TiO2, respectively.

A Biomimetic Method of Hydroxyapatite Powders Synthesized in Simulated Body Fluid

2005 ◽  
Vol 297-300 ◽  
pp. 1371-1375
Author(s):  
Feng Wang ◽  
Mu Sen Li
Keyword(s):  
Electron Microscope ◽  
High Temperature ◽  
Simulated Body Fluid ◽  
Transmission Electron Microscope ◽  
Body Fluid ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infra Red ◽  
Biomimetic Method

Hydroxyapatite (HA) powders were directly synthesized in simulated body fluid (SBF) at 37°C, without the need for high-temperature calcified. These powders were found to contain trace amount of CO32-, Cl-, Na+ and K+ impurities, originated from the of SBF solutions during their deposition. The characterizations of the synthesized HA powders were performed by X-ray diffraction (XRD), Fourier-transformed infra-red spectroscopy (FTIR) and Transmission electron microscope (TEM). The experimental results showed that the HA synthesized by the SBF route might be more close to that human bone in structure and compositions. Furthermore, the processes flow for HA synthesis was optimized and the synthesized mechanism was also discussed.

In Vitro Bioactivity of Composite of Nanophase Titania/Bioactive Glass-Ceramic in Simulated Body Fluid

2005 ◽  
Vol 288-289 ◽  
pp. 171-174
Author(s):  
Hui Wang ◽  
Bang Cheng Yang ◽  
Qi Feng Yu ◽  
Dayi Wu ◽  
Xing Dong Zhang
Keyword(s):  
Simulated Body Fluid ◽  
Bioactive Glass ◽  
Glass Ceramic ◽  
Body Fluid ◽  
Mechanical Analysis ◽  
Apatite Formation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Biomechanical Compatibility

Titania ceramics is lack of bone-bonding ability even if it has excellent biocompatibility. Recently, it is even found that the nanophase titania ceramics could enhance the proliferation of osteoblasts. If the bone-bonding ability of this material is improved, it would be a potential bone replacement material. Bioactive glass-ceramic (BGC) is provided with the best bioactivity in biomaterials. In this study, the apatite formation ability and the mechanic properties of titania ceramic were investigated by the accession of BGC. Four samples: TiO2 ceramic, TiO2 +10%BGC, TiO2 +20%BGC and BGC were prepared respectively. These ceramics were exposed to a simulated body fluid (SBF) for 7, 14 and 21d. Scanning electron microscopy (SEM), energy dispersive X-ray detector (EDX) and thin film X-ray diffraction (TF-XRD) results showed that the apatite formation of the ceramics was improved by adding BGC into nanophase titania ceramic. The mechanical analysis showed the biomechanical compatibility was also improved by adding BGC into nanophase titania ceramic.

In Vitro Behavior of Magnesium Apatite Coatings in Organic Modified Simulated Body Fluid

2011 ◽  
Vol 299-300 ◽  
pp. 508-511
Author(s):  
Guo Chao Qi ◽  
Feng Jun Shan ◽  
Qiang Li ◽  
Jing Yuan Yu ◽  
Qu Kai Zhang
Keyword(s):  
Simulated Body Fluid ◽  
Photoelectron Spectroscopy ◽  
Body Fluid ◽  
Sol Gel ◽  
Dip Coating ◽  
X Ray ◽  
Coating Method ◽  
Sbf Solution ◽  
Dip Coating Method

Magnesium apatite (MA, (Ca9Mg)(PO4)6(OH)2) and Hydroxyapatite (HA) coatings were synthesized on Ti6Al4V substrates by a sol-gel dip coating method. Glucose and bovine serum albumin (BSA) were added to the standard simulated body fluid (SBF) separately to form organic-containing simulated body fluids. MA and HA coatings were immersed in standard and organic modified SBF for time periods of 4, 7, 14, 21 and 28 days at 37±1°C. The surface dissolution and deposition behavior of the coatings after soaking were examined with Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The results show that glucose in SBF has no apparent effect on the deposition of new apatite from the solution. BSA in SBF shows retardation effect on the deposition of apatite by forming a protein dominant globular layer. This layer inhibits the further deposition of apatite from SBF solution.

Sign in / Sign up

Export Citation Format

Share Document