Thermal Decomposition Kinetics of Flame Retardant Polybutylene Terephthalate Matrix Composites

2019 ◽  
Vol 956 ◽  
pp. 181-191
Author(s):  
Jian Lin Xu ◽  
Bing Xue Ma ◽  
Cheng Hu Kang ◽  
Cheng Cheng Xu ◽  
Zhou Chen ◽  
...  

The thermal decomposition kinetics of polybutylene terephthalate (PBT) and flame-retardant PBT (FR-PBT) were investigated by thermogravimetric analysis at various heating rates. The kinetic parameters were determined by using Kissinger, Flynn-Wall-Ozawa and Friedman methods. The y (α) and z (α) master plots were used to identify the thermal decomposition model. The results show that the rate of residual carbon of FR-PBT is higher than that of PBT and the maximum mass loss rate of FR-PBT is lower than that of PBT. The values of activation energy of PBT (208.71 kJ/mol) and FR-PBT (244.78 kJ/mol) calculated by Kissinger method were higher than those of PBT (PBT: 195.54 kJ/mol) and FR-PBT (FR-PBT: 196.00 kJ/mol) calculated by Flynn-Wall-Ozawa method and those of PBT and FR-PBT (PBT: 199.10 kJ/mol, FR-PBT: 206.03 kJ/mol) calculated by Friedman methods. There is a common thing that the values of activation energy of FR-PBT are higher than that of PBT in different methods. The thermal decomposition reaction models of the PBT and FR-PBT can be described by Avarami-Erofeyev model (A1).

2020 ◽  
Vol 32 (11) ◽  
pp. 2921-2926
Author(s):  
BOTHWELL NYONI ◽  
PHUTI TSIPA ◽  
SIFUNDO DUMA ◽  
SHAKA SHABANGU ◽  
SHANGANYANE HLANGOTHI

In present work, the thermal decomposition behaviour and kinetics of proteins, carbohydrates and lipids is studied by use of models derived from mass-loss data obtained from thermogravimetric analysis of Scenedesmus microalgae. The experimental results together with known decomposition temperature range values obtained from various literature were used in a deconvolution technique to model the thermal decomposition of proteins, carbohydrates and lipids. The models fitted well (R2 > 0.99) and revealed that the proteins have the highest reactivity followed by lipids and carbohydrates. Generally, the decomposition kinetics fitted well with the Coats-Redfern first and second order kinetics as evidenced by the high coefficients of determination (R2 > 0.9). For the experimental conditions used in this work (i.e. high heating rates), the thermal decomposition of protein follows second order kinetics with an activation energy in the range of 225.3-255.6 kJ/mol. The thermal decomposition of carbohydrate also follows second order kinetics with an activation energy in the range of 87.2-101.1 kJ/mol. The thermal decomposition of lipid follows first order kinetics with an activation energy in the range of 45-64.8 kJ/ mol. This work shows that the thermal decomposition kinetics of proteins, carbohydrates and lipids can be performed without the need of experimentally isolating the individual components from the bulk material. Furthermore, it was shown that at high heating rates, the decomposition temperatures of the individual components overlap resulting in some interactions that have a synergistic effect on the thermal reactivity of carbohydrates and lipids.


2014 ◽  
Vol 983 ◽  
pp. 190-193
Author(s):  
Cai Yun Sun ◽  
Yong Li Yang ◽  
Ming Gao

Wood has been treated with amino resins and amino resins modified with phosphoric acid to impart flame retardancy. The thermal degradation of samples has been studied by thermogravimetry (TG) in air. From the resulting data, kinetic parameters for different stages of thermal degradation are obtained following the method of Broido. For the decomposition of wood and flame retardant wood, the activation energy is found to decrease from 122 to 72 kJmol-1.


2013 ◽  
Vol 641-642 ◽  
pp. 144-147 ◽  
Author(s):  
Ming Hua Chen ◽  
Tao Zhang ◽  
Wen Ping Chang ◽  
Xiao Biao Jia

The thermal decomposition kinetics of RDX at different rates was studied by thermogravimetric analyzer(TG) and the activation energy of RDX was calculated by distributed activation energy model. It is shown that the thermal decomposition processes of RDX were divided into three stages according to the TG curves, they are molten stage, thermal decomposition stage and eng stage. The activation energies of RDX are all between 124.34 and 181.48KJ•mol-1 in the thermal decomposition stage of non-monotonously increasing. The activation energy of RDX is 139.98 KJ•mol-1 in the molten stage, and the thermal decomposition stage is167.24KJ•mol-1.


Holzforschung ◽  
2017 ◽  
Vol 71 (3) ◽  
pp. 233-240 ◽  
Author(s):  
Ke-Chang Hung ◽  
Jyh-Horng Wu

Abstract Wood-SiO2 composites (WSiO2Cs) were prepared by means of the sol-gel process with methyltrimethoxysilane (MTMOS) as a reagent, and the physical properties, structure and thermal decomposition kinetics of the composites has been evaluated. The dimensional stability of the WSiO2Cs was better than that of unmodified wood, especially in terms of the weight percent gain (WPG), which achieved values up to 30%. The 29Si-NMR spectra show two different siloxane peaks (T2 and T3), which supports the theory about the formation of MTMOS network structures. Thermal decomposition experiments were also carried out in a TG analyzer under a nitrogen atmosphere. The apparent activation energy was determined according to the iso-conversional methods of Friedman, Flynn-Wall-Ozawa, modified Coats-Redfern, and Starink. The apparent activation energy between 10 and 70% conversion is 147–172, 170–291, 189–251, and 192–248 kJ mol−1 for wood and WSiO2Cs with WPGs of 10, 20, and 30%, respectively. However, the reaction order between 10 and 70% conversion calculated by the Avrami theory was 0.50–0.56, 0.35–0.45, 0.33–0.44, and 0.28–0.48. These results indicate that the dimensional and thermal stability of the wood could be effectively enhanced by MTMOS treatment.


2014 ◽  
Vol 881-883 ◽  
pp. 726-733
Author(s):  
Gui Ying Xu ◽  
Jiang Bo Wang ◽  
Ling Ping Guo ◽  
Guo Gang Sun

TG analysis was used to investigate the thermal decomposition of switchgrass, which is a potential gasification feedstock. 10 mg switchgrass sample with the particles between 0.45 and 0.70 mm was linearly heated to 873 K at heating rates of 10, 20, 30 K/min, respectively, under high-purity nitrogen. The Kissinger method and three isoconversional methods including Friedman, Flynn-wall-Ozawa, Vyazovkin and Lenikeocink methods were used to estimate the apparent activation energy of switchgrass. With the three isoconversional methods, it can be concluded that the activation energy increases with increasing conversion. The four model free methods reveal activation energies in the range of 70-460 kJ/mol. These activation energy values provide the basic data for the thermo-chemical utilization of the switchgrass.


RSC Advances ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 3128-3139 ◽  
Author(s):  
Yihan Li ◽  
Zhe Qiang ◽  
Xie Chen ◽  
Jie Ren

The Flynn–Wall–Ozawa method was applied to study the local activation energy of flame retardant thermoset PLA, and the results showed that with an increase of conversion of thermal degradation, the local activation energy was increased slowly.


Sign in / Sign up

Export Citation Format

Share Document