scholarly journals Use of remote-sensing reflectance to constrain a data assimilating marine biogeochemical model of the Great Barrier Reef

2016 ◽  
Vol 13 (23) ◽  
pp. 6441-6469 ◽  
Author(s):  
Emlyn M. Jones ◽  
Mark E. Baird ◽  
Mathieu Mongin ◽  
John Parslow ◽  
Jenny Skerratt ◽  
...  

Abstract. Skillful marine biogeochemical (BGC) models are required to understand a range of coastal and global phenomena such as changes in nitrogen and carbon cycles. The refinement of BGC models through the assimilation of variables calculated from observed in-water inherent optical properties (IOPs), such as phytoplankton absorption, is problematic. Empirically derived relationships between IOPs and variables such as chlorophyll-a concentration (Chl a), total suspended solids (TSS) and coloured dissolved organic matter (CDOM) have been shown to have errors that can exceed 100 % of the observed quantity. These errors are greatest in shallow coastal regions, such as the Great Barrier Reef (GBR), due to the additional signal from bottom reflectance. Rather than assimilate quantities calculated using IOP algorithms, this study demonstrates the advantages of assimilating quantities calculated directly from the less error-prone satellite remote-sensing reflectance (RSR). To assimilate the observed RSR, we use an in-water optical model to produce an equivalent simulated RSR and calculate the mismatch between the observed and simulated quantities to constrain the BGC model with a deterministic ensemble Kalman filter (DEnKF). The traditional assumption that simulated surface Chl a is equivalent to the remotely sensed OC3M estimate of Chl a resulted in a forecast error of approximately 75 %. We show this error can be halved by instead using simulated RSR to constrain the model via the assimilation system. When the analysis and forecast fields from the RSR-based assimilation system are compared with the non-assimilating model, a comparison against independent in situ observations of Chl a, TSS and dissolved inorganic nutrients (NO3, NH4 and DIP) showed that errors are reduced by up to 90 %. In all cases, the assimilation system improves the simulation compared to the non-assimilating model. Our approach allows for the incorporation of vast quantities of remote-sensing observations that have in the past been discarded due to shallow water and/or artefacts introduced by terrestrially derived TSS and CDOM or the lack of a calibrated regional IOP algorithm.

2016 ◽  
Author(s):  
Emlyn M. Jones ◽  
Mark E. Baird ◽  
Mathieu Mongin ◽  
John Parslow ◽  
Jenny Skerratt ◽  
...  

Abstract. Skilful marine biogeochemical (BGC) models are required to understand a range of coastal and global phenomena such as changes in nitrogen and carbon cycles. The refinement of BGC models through the assimilation of variables calculated from observed in-water inherent optical properties (IOPs), such as phytoplankton absorption, is problematic. Empirically-derived relationships between IOPs and variables such as Chlorophyll-a concentration (Chl-a), Total Suspended Solids (TSS) and Color Dissolved Organic Matter (CDOM) have been shown to have errors that can exceed 100 % of the observed quantity. These errors are greatest in shallow coastal regions, such as the Great Barrier Reef (GBR), due the additional signal from bottom reflectance. Rather than assimilate quantities calculated using error-prone IOP algorithms, this study demonstrates the advantages of assimilating quantities calculated directly from the less error-prone satellite remote-sensing reflectance. The assimilation of a directly-observed quantity, in this case remote-sensing reflectance, is analogous to the assimilation of temperature brightness in Numerical Weather Prediction (NWP), or along-track sea-surface height in hydrodynamic models. To assimilate the observed reflectance, we use an in-water optical model to produce an equivalent simulated remote-sensing reflectance, and calculate the mis-match between the observed and simulated quantities to constrain the BGC model with a Deterministic Ensemble Kalman Filter (DEnKF). Using the assumption that simulated surface Chl-a is equivalent to remotely-sensed OC3M estimate of Chl-a resulted in a forecast error of approximately 75 %. Alternatively, assimilation of remote-sensing reflectance resulted in a forecast error of less than 40 %. Thus, in the coastal waters of the GBR, assimilating remote-sensing reflectance halved the forecast errors. When the analysis and forecast fields from the assimilation system are compared with the non-assimilating model, an independent comparison to in-situ observations of Chl-a, TSS, and dissolved inorganic nutrients (NO3, NH4 and DIP) show that errors are reduced by up to 90 %. In all cases, the assimilation system improves the result compared to the non-assimilating model. This approach allows for the incorporation of vast quantities of remote-sensing observations that have in the past been discarded due to shallow water and/or artefacts introduced by terrestrially-derived TSS and CDOM, or the lack of a calibrated regional IOP algorithm.


2020 ◽  
Vol 12 (1) ◽  
pp. 197
Author(s):  
Debbie Chamberlain ◽  
Stuart Phinn ◽  
Hugh Possingham

Great Barrier Reef catchments are under pressure from the effects of climate change, landscape modifications, and hydrology alterations. With the use of remote sensing datasets covering large areas, conventional methods of change detection can expose broad transitions, whereas workflows that excerpt data for time-series trends divulge more subtle transformations of land cover modification. Here, we combine both these approaches to investigate change and trends in a large estuarine region of Central Queensland, Australia, that encompasses a national park and is adjacent to the Great Barrier Reef World Heritage site. Nine information classes were compiled in a maximum likelihood post classification change analysis in 2004–2017. Mangroves decreased (1146 hectares), as was the case with estuarine wetland (1495 hectares), and saltmarsh grass (1546 hectares). The overall classification accuracies and Kappa coefficient for 2004, 2006, 2009, 2013, 2015, and 2017 land cover maps were 85%, 88%, 88%, 89%, 81%, and 92%, respectively. The cumulative area of open forest, estuarine wetland, and saltmarsh grass (1628 hectares) was converted to pasture in a thematic change analysis showing the “from–to” change. We generated linear regression relationships to examine trends in pixel values across the time series. Our findings from a trend analysis showed a decreasing trend (p value range = 0.001–0.099) in the vegetation extent of open forest, fringing mangroves, estuarine wetlands, saltmarsh grass, and grazing areas, but this was inconsistent across the study site. Similar to reports from tropical regions elsewhere, saltmarsh grass is poorly represented in the national park. A severe tropical cyclone preceding the capture of the 2017 Landsat 8 Operational Land Imager (OLI) image was likely the main driver for reduced areas of shoreline and stream vegetation. Our research contributes to the body of knowledge on coastal ecosystem dynamics to enable planning to achieve more effective conservation outcomes.


2020 ◽  
Vol 12 (23) ◽  
pp. 3975
Author(s):  
Bonyad Ahmadi ◽  
Mehdi Gholamalifard ◽  
Tiit Kutser ◽  
Stefano Vignudelli ◽  
Andrey Kostianoy

Currently, satellite ocean color imageries play an important role in monitoring of water properties in various oceanic, coastal, and inland ecosystems. Although there is a long-time and global archive of such valuable data, no study has comprehensively used these data to assess the changes in the Caspian Sea. Hence, this study assessed the variability of bio-optical properties of the upper-water column in the Southern Caspian Sea (SCS) using the archive of the Sea-Viewing Wide Field-of-View Sensor (SeaWiFS) and the Moderate Resolution Imaging Spectroradiometer (MODIS). The images acquired from SeaWiFS (January 1998 to December 2002) and MODIS Aqua (January 2003 to December 2015) satellites were used to investigate the spatial–temporal variability of bio-optical properties including Chlorophyll-a (Chl-a), attenuation coefficient, and remote sensing reflectance, and environmental parameters such as sea surface temperature (SST), wind stress and the El Nino-southern oscillation (ENSO) phenomena at different time lags in the study area. The trend analysis demonstrated an overall increase of 0.3358 mg m−3 in the Chl-a concentration during 1998–2015 (annual increase rate of 0.018 mg m−3 year−1) and four algal blooms and in turn an abnormal increase in Chl-a concentration were occurred in August 2001, September 2005, 2009, and August 2010. The linear model revealed that Chl-a in the northern and middle part of the study area had been influenced by the attenuation coefficient after a one-month lag time. The analysis revealed a sharp decline in Chl-a concentration during 2011–2015 and showed a high correlation with the turbidity and attenuation coefficient in the southern region, while Kd_490nm and remote sensing reflectance did a low one. Generally, Chl-a concentration exhibited a positive correlation with the attenuation coefficient (r = 0.63) and with remote sensing reflectance at the 555 nm (r = 0.111). This study can be used as the basis for predictive modeling to evaluate the changes of water quality and bio-optical indices in the Southern Caspian Sea (SCS).


Cartography ◽  
1985 ◽  
Vol 14 (2) ◽  
pp. 116-123 ◽  
Author(s):  
Gerard Wedderburn-Bisshop ◽  
Peter Cuerin ◽  
Peter Holland

Sign in / Sign up

Export Citation Format

Share Document