Structural relief across the NW segment of the Zagros Mountain Front Flexure in the Kurdistan Region of Iraq: implications for basement thrusting

2020 ◽  
Author(s):  
Mjahid Zebari ◽  
Christoph Grützner ◽  
Philipp Balling ◽  
Kamil Ustaszewski
Keyword(s):  
Cross Sections ◽  
Convergence Rates ◽  
Structural Evolution ◽  
Kurdistan Region ◽  
Zagros Mountain ◽  
River Terraces ◽  
Basement Fault ◽  
Mountain Front ◽  
Deformed State ◽  
Structural Relief

<p>Within the NW segment of the Zagros belt in the Kurdistan Region of Iraq, the Zagros Mountain Front Flexure separates the High Folded Zone from the Foothill Zone and forms a pronounced topographic and structural step. Due to the lack of outcrops and subsurface data, balanced and kinematic valid geometrical interpretations for the subsurface deformation associated with this step are not well constrained yet. To solve this, we estimated the structural relief across seven regional transects crossing the Mountain Front Flexure and we constrained the geometry of deformation from deformed-state and forward-modeled balanced cross-sections. The calculated structural relief for six out of seven transects ranges from 2 to 3 km. By using forward modeling, we show that predominantly thick-skinned deformation is needed to explain this amount of relief across the Mountain Front Flexure. Our best-fitting result suggests c. 6.5 km of displacement along a basement thrust fault that dips c. 25° at the top of the basement and that is shallowing downwards. About 4.2 km of this displacement on the basement fault were accommodated up-section by thrust-related and detachment folding of the Triassic and younger units within two prominent anticlines. About 2.3 km of displacement was transferred to the Foothill Zone, forming detachment folds above the Triassic detachment level. Inclined river terraces on the flank of anticlines within the Foothill Zone indicate ongoing displacement on this basement fault. The amount of shortening within the low topographic part of the belt from the deformation front to the limit of seismogenic thrusting within the Imbricated Zone, implies that the Late Miocene to Quaternary shortening rates there were much lower than the present-day geodetically derived convergence rates for this part of belt. These results shed new light on the geometry of the Zagros and its structural evolution.</p>

Structural evolution in the Moine of northwest Scotland: a Caledonian linked thrust system?

1986 ◽  
Vol 123 (1) ◽  
pp. 1-11 ◽  
Author(s):  
Robert W. H. Butler
Keyword(s):  
Cross Sections ◽  
Lower Crust ◽  
Structural Evolution ◽  
Amphibolite Facies ◽  
Metamorphic Basement ◽  
Thrust System ◽  
Lower Crustal

AbstractA model is proposed whereby the Caledonian metamorphic basement-cover complex of northwest Scotland (the Moine) is considered as a linked thrust system. This system lies between the Moine thrust at its base and the Naver–Sgurr Beag slide at its top. Ductile fold and thrust zones, which developed at mid crustal levels at metamorphic grades from greenschist to amphibolite facies, are interpreted as decoupling from a detachment presently situated at relatively shallow depths. This model is illustrated by two preliminary balanced cross-sections. These imply shortening across the northwest Scottish Caledonides in excess of 130 km and probably over 200 km. When these structures are restored onto a crustal template a considerable quantity of lower crust is found to be required at depth. The most likely location for the lower crustal wedge is beneath the Grampian Highlands.

The influence of backstop geometry in the structural style of the Eastern Cordillera of Colombia: A sandbox modeling approach 

2021 ◽  
Author(s):  
Camilo Andrés Conde Carvajal ◽  
Cristhian Bolívar Riascos Rodríguez ◽  
Michael Andres Avila Paez ◽  
Andreas Kammer
Keyword(s):  
Kink Band ◽  
Ductile Deformation ◽  
High Plains ◽  
Angle Of Internal Friction ◽  
Eastern Cordillera ◽  
Surface Uplift ◽  
Structural Style ◽  
Mountain System ◽  
Mountain Front ◽  
Structural Relief

<p>Among the foreland belts of the Andean mountain system, the Eastern Cordillera of Colombia (EC) represents a unique example of an isolated, bi-vergent mountain belt. In contrast, to block tectonics of broken foreland basins, it displays a ductile deformation style which involves two mountain fronts with a structural relief of the order of 10 km. Internal parts of the EC have been shortened by buckling at high and a homogeneously strained basement at deeper structural levels. These deformation patterns likely attest to conditions of a thermally weakened backarc setting. Two opposed scenarios have been postulated for its surface uplift and consequent exhumation: 1) an E-migrating deformation front and the formation of progressively forward breaking faults; and 2) the pop-up of a weak crustal welt enclosed by strong foreland blocks. In this latter setting, a synchronous early formation of marginal mountain fronts and a late-stage surface uplift of a central domain may be anticipated. These two constellations compare, in terms of a contrasting model setup, to a foreland migrating orogenic wedge or a relatively stable, doubly vergent wedge formed above a structural discontinuity or rheologic boundaries that acted as sites for the nucleation of the marginal faults.</p><p>In this contribution, we opt to examine the “boundary” conditions for the development of a doubly vergent wedge formed at the tip line of a rigid tapering backstop, that simulates a rigid foreland block. With respect to the shape of this backstop, we examine the effects of tip angles less than the angle of internal friction (<30°) and find, that at a low tip angle of 10° the pop-up evolves above a forward-breaking principal kink-band with the synchronous formation of a sequence of conjugate back-kinks that cut into the sand pack, as it is pushed toward the backstop. At a moderate tip angle of 20<sup>o </sup>the forward-breaking kink-band is slightly steeper than the backstop and gives rise to a frontal fold with an overturned limb. This latter geometrical configuration loosely compares to the structural relations of a structural section through the high plains of Bogotá, where the eastern mountain front defines a strongly deformed antiform, that is juxtaposed against an undeformed margin of the adjacent Guyana shield.</p>

scholarly journals EVOLUTION OF THE CARBON NANOTUBE BUNDLE STRUCTURE UNDER BIAXIAL AND SHEAR STRAINS

2020 ◽  
pp. 525
Author(s):  
Leysan Kh. Rysaeva ◽  
Dmitry V. Bachurin ◽  
Ramil T. Murzaev ◽  
Dina U. Abdullina ◽  
Elena A. Korznikova ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Shear Strain ◽  
Cross Sections ◽  
Degrees Of Freedom ◽  
Shear Bands ◽  
Volumetric Strain ◽  
Structural Evolution ◽  
Biaxial Compression ◽  
Chain Model ◽  
Nanotube Bundle

Close packed carbon nanotube bundles are materials with highly deformable elements, for which unusual deformation mechanisms are expected. Structural evolution of the zigzag carbon nanotube bundle subjected to biaxial lateral compression with the subsequent shear straining is studied under plane strain conditions using the chain model with a reduced number of degrees of freedom. Biaxial compression results in bending of carbon nanotubes walls and formation of the characteristic pattern, when nanotube cross-sections are inclined in the opposite directions alternatively in the parallel close-packed rows. Subsequent shearing up to a certain shear strain leads to an appearance of shear bands and vortex-like displacements. Stress components and potential energy as the functions of shear strain for different values of the biaxial volumetric strain are analyzed in detail. A new mechanism of carbon nanotube bundle shear deformation through cooperative, vortex-like displacements of nanotube cross sections is reported.

Structural Evolution of Nb/NbC Multilayer Coatings

2007 ◽  
Vol 336-338 ◽  
pp. 879-882 ◽  
Author(s):  
I. Dahan ◽  
M.P. Dariel
Keyword(s):  
Thermal Annealing ◽  
Cross Sections ◽  
Structural Evolution ◽  
Multilayer Coatings ◽  
Subsequent Growth ◽  
Present Communication ◽  
Temperature Range ◽  
Nucleation Stage ◽  
Initial Nucleation ◽  
Interdiffusion Kinetics

The present communication is concerned with the interdiffusion kinetics and the interface breakdown that take place in the Nb/NbC multilayer system as the result of thermal annealing in the 400-800oC temperature range. Within this temperature range carbon is the diffusing species. Carbon diffuses from the carbide layer into the adjacent Nb layer, depleting its concentration within the carbide, causing the nucleation and subsequent growth of an intermediate Nb2C layer and decreasing the width of the original Nb layer. TEM examination of the cross-sections of the multilayer specimens provides data regarding the evolution of the microstructure and, in particular, regarding the initial nucleation stage of the newly formed Nb2C layer.

scholarly journals Structure and tectonic evolution of hybrid thick- and thin-skinned systems in the Malargüe fold–thrust belt, Neuquén basin, Argentina

2016 ◽  
Vol 153 (5-6) ◽  
pp. 1066-1084 ◽  
Author(s):  
FACUNDO FUENTES ◽  
BRIAN K. HORTON ◽  
DANIEL STARCK ◽  
ANDRÉS BOLL
Keyword(s):  
Cross Sections ◽  
Hanging Wall ◽  
Foreland Basin ◽  
Thrust Belt ◽  
Kinematic Evolution ◽  
Basement Faults ◽  
Neuquen Basin ◽  
Structural Relief ◽  
Basement Structures ◽  
Neuquén Basin

AbstractAndean Cenozoic shortening within the Malargüe fold–thrust belt of west-central Argentina has been dominated by basement faults largely influenced by pre-existing Mesozoic rift structures of the Neuquén basin system. The basement contractional structures, however, diverge from many classic inversion geometries in that they formed large hanging-wall anticlines with steeply dipping frontal forelimbs and structural relief in the order of several kilometres. During Cenozoic E–W shortening, the reactivated basement faults propagated into cover strata, feeding slip to shallow thrust systems that were later carried in piggyback fashion above newly formed basement structures, yielding complex thick- and thin-skinned structural relationships. In the adjacent foreland, Cenozoic clastic strata recorded the broad kinematic evolution of the fold–thrust belt. We present a set of structural cross-sections supported by regional surface maps and industry seismic and well data, along with new stratigraphic information for associated Neogene synorogenic foreland basin fill. Collectively, these results provide important constraints on the temporal and geometric linkages between the deeper basement faults (including both reactivated and newly formed structures) and shallow thin-skinned thrust systems, which, in turn, offer insights for the understanding of hydrocarbon systems in the actively explored Neuquén region of the Andean orogenic belt.

Fault System Evolution and Its Influences on Buried-hills Formation in Tanhai Area of Jiyang Depression, Bohai Bay Basin, China

2020 ◽  
Author(s):  
Meng Zhang ◽  
Zhiping Wu ◽  
Shiyong Yan
Keyword(s):  
Stress Field ◽  
Cross Sections ◽  
Large Scale ◽  
Structural Evolution ◽  
Fault System ◽  
Mountain Range ◽  
Bohai Bay ◽  
Thrust Faults ◽  
Bohai Bay Basin ◽  
Jiyang Depression

<p>Buried-hills, paleotopographic highs covered by younger sediments, become the focused area of exploration in China in pace with the reduction of hydrocarbon resources in the shallow strata. A number of buried-hill fields have been discovered in Tanhai area located in the northeast of Jiyang Depression within Bohai Bay Basin, which provides an excellent case study for better understanding the structural evolution and formation mechanism of buried-hills. High-quality 3-D seismic data calibrated by well data makes it possible to research deeply buried erosional remnants. In this study, 3-D visualization of key interfaces, seismic cross-sections, fault polygons maps and thickness isopach maps are shown to manifest structural characteristics of buried-hills. Balanced cross-sections and fault growth rates are exhibited to demonstrate the forming process of buried-hills. The initiation and development of buried-hills are under the control of fault system. According to strike variance, main faults are grouped into NW-, NNE- and near E-trending faults. NW-trending main faults directly dominate the whole mountain range, while NNE- and near E-trending main faults have an effect on dissecting mountain range and controlling the single hill. In addition, secondary faults with different nature complicate internal structure of buried-hills. During Late Triassic, NW-trending thrust faults formed in response to regional compressional stress field, preliminarily building the fundamental NW-trending structural framework. Until Late Jurassic-Early Cretaceous, rolling-back subduction of Pacific Plate and sinistral movement of Tan-Lu Fault Zone (TLFZ) integrally converted NW-trending thrust faults into normal faults. The footwall of NW-trending faults quickly rose and became a large-scale NW-trending mountain range. The intense movement of TLFZ simultaneously induced a series of secondary NNE-trending strike-slip faults, among which large-scale ones divided the mountain range into northern, middle and southern section. After entry into Cenozoic, especially Middle Eocene, the change of subduction direction of Pacific Plate induced the transition of regional stress field. Near E-trending basin-controlling faults developed and dissected previous tectonic framework. The middle section of mountain range was further separated into three different single hill. Subsequently, the mountain range was gradually submerged and buried by overlying sediments, due to regional thermal subsidence. Through multiphase structural evolution, the present-day geometry of buried-hills is eventually taken shape.</p>

Structure of the Gare Kakheti foothills using seismic reflection profiles: implications for kinematic evolution of the Georgian part of Kura foreland fold-and-thrust belt

2020 ◽  
Author(s):  
Alexander Razmadze
Keyword(s):  
Cross Sections ◽  
Seismic Reflection ◽  
Structural Evolution ◽  
Foreland Basin ◽  
Thrust Belt ◽  
Fault Propagation ◽  
Seismic Reflection Data ◽  
Growth Strata ◽  
Kinematic Evolution ◽  
Fold And Thrust Belt

<p>Gare Kakheti foothills are located between Lesser Caucasus and Kakheti Ridge and are mainly represented by the series of NEN dipping thrust faults, most of which are associated with fault‐related folds. Gare Kakheti foothills as a part of the Kura foreland fold-and-thrust belt developed formerly as a foreland basin (Oligocene-Lower Miocene) (e.g. Alania et al., 2017). Neogene shallow marine and continental sediments in the Gare Kakheti foothills keep the record on the stratigraphy and structural evolution of the study area during the compressive deformation. Interpreted seismic profiles and structural cross-sections across the Udabno, Tsitsmatiani, and Berebisseri synclines show that they are thrust-top basins. Seismic reflection data reveal the presence of growth fault-propagation folds and some structural wedges (or duplex). The evolution of the Udabno, Tsitsmatiani, and Berebisseri basins is compared with simple models of thrust-top basins whose development is controlled by the kinematics of competing for growth anticlines. Growth anticlines are mainly represented by fault-propagation folds. The geometry of growth strata in associated footwall synclines and the sedimentary infill of thrust-top basins provide information on the thrusting activity in terms of location, geometry, and age.<br>This work was supported by Shota Rustaveli National Science Foundation (SRNSF - #PHDF-19-268).</p><p> </p>

Structure, strain and AMS of the Uzunakhmat thrust sheet (Talas Range, Kyrgyz North Tian Shan)

2020 ◽  
Author(s):  
Anastasia Kushnareva ◽  
Artem Moskalenko ◽  
Alexander Pasenko
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Structural Evolution ◽  
Middle Part ◽  
Tien Shan ◽  
Initial Shape ◽  
Thrust Sheet ◽  
Structural Style ◽  
Thrust Sheets ◽  
Tian Shan

<p>The Talas Range forms the northwest part of the Caledonides of the Northern Tian Shan. Based on differences in the structural style, metamorphism and sedimentary successions, three thrust sheets have been identified – the Uzunakhmat, Talas, and Kumyshtag thrust sheets. The Talas and Kumyshtag thrust sheets consist of Neoproterozoic-Ordovician terrigenous and carbonate rock units, whereas the Uzunakhmat thrust sheet consists of Neoproterozoic terrigenous rocks metamorphosed up to greenschist facies. The Uzunakhmat thrust sheet is separated from the Talas and Kumyshtag thrust sheets by the southwest-dipping Central Talas thrust (CTT). The dextral strike-slip Talas-Fergana Fault bounds the Uzunakhmat thrust sheet in the southwest. The main deformation events occurred in the Middle-Late Ordovician.</p><p>Structural and strain studies were done along profiles normal to the strike of folds and faults and located in the northwest and southeast parts of the Uzunakhmat thrust sheet. We also incorporate in our study structural profile in the central part of the Uzunakhmat thrust sheet, documented by Khudoley (1993) and Voytenko & Khudoley (2012).</p><p>The main strain indicators were detrital quartz grains in sandstones. Rf/φ and Normalized Fry methods were used to identify the amount of strain. Oblate ellipsoids predominate with Rxz values varying mostly from 1,6 to 2,4. Long axes of strain ellipsoids are sub-horizontal with the southeast to east-southeast trend. Similar trends have long axes of the anisotropy magnetic susceptibility ellipsoid being parallel to fold axes, cleavage-bedding intersection and mineral lineation as well as the trend of the major thrusts, including CTT.</p><p>The modern shape of the Uzunakhmat thrust sheet is similar to an elongated triangle, pinching out northwest and expanding southeast. Cross-section balancing corrected for the amount of strain shows along-strike decreasing of shortening in the southeast direction. Total shortening varies from 35% to 55% between sections located about 15 km from each other. Such significant variation in shortening corresponds to variation in structural style with much more tight folds and more numerous thrusts for cross-sections with a higher amount of shortening. However, the restored length of all cross-sections is quite similar pointing to the approximately rectangular initial shape of the Uzunakhmat thrust sheet. Our interpretation is that during the Caledonian tectonic events, the Uzunakhmat thrust sheet was displaced in the northwest direction with accompanied thrusting and folding of rock units within the thrust sheet. These deformations formed the modern shape of the thrust sheet in accordance with the amount of shortening detected by cross-section balancing. This interpretation also implies that modern erosion did not significantly affect shape of the Uzunakhmat thrust sheet formed after the Caledonian deformation.</p><p>Khudoley, A.K., 1993. Structural and strain analyses of the middle part of the Talassian Alatau ridge (Middle Asia, Kirgiystan). J. Struct. Geol. 6, 693–706.</p><p>Voytenko N.V., Khudoley A.K. Structural evolution of metamorphic rocks in the Talas Alatau, Tien Shan, Central Asia: Implication for early stages of the Talas-Ferghana Fault. // C. R. Geoscience. 2012. V. 344. P. 138–148.</p>

Sign in / Sign up

Export Citation Format

Share Document